Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753364Ab2K0NeH (ORCPT ); Tue, 27 Nov 2012 08:34:07 -0500 Received: from mail-ie0-f174.google.com ([209.85.223.174]:44619 "EHLO mail-ie0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751345Ab2K0NeE (ORCPT ); Tue, 27 Nov 2012 08:34:04 -0500 MIME-Version: 1.0 In-Reply-To: <1354021236-28596-2-git-send-email-ch.naveen@samsung.com> References: <1354021236-28596-1-git-send-email-ch.naveen@samsung.com> <1354021236-28596-2-git-send-email-ch.naveen@samsung.com> Date: Tue, 27 Nov 2012 19:04:03 +0530 Message-ID: Subject: Re: [PATCH 1/3] i2c: exynos5: add High Speed I2C controller driver From: Thomas Abraham To: Naveen Krishna Chatradhi Cc: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-i2c@vger.kernel.org, naveenkrishna.ch@gmail.com, kgene.kim@samsung.com, grant.likely@secretlab.ca, w.sang@pengutronix.de, linux-kernel@vger.kernel.org, taeggyun.ko@samsung.com Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33138 Lines: 925 On 27 November 2012 18:30, Naveen Krishna Chatradhi wrote: > Adds support for High Speed I2C driver found in Exynos5 and later > SoCs from Samsung. This driver currently supports Auto mode. > > Driver only supports Device Tree method. > > Signed-off-by: Taekgyun Ko > Signed-off-by: Naveen Krishna Chatradhi > --- > drivers/i2c/busses/Kconfig | 6 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-exynos5.c | 758 ++++++++++++++++++++++++++++++++++++++ > drivers/i2c/busses/i2c-exynos5.h | 80 ++++ > 4 files changed, 845 insertions(+) > create mode 100644 drivers/i2c/busses/i2c-exynos5.c > create mode 100644 drivers/i2c/busses/i2c-exynos5.h > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 65dd599..88e8833 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -609,6 +609,12 @@ config I2C_S3C2410 > Say Y here to include support for I2C controller in the > Samsung SoCs. > > +config I2C_EXYNOS5 > + tristate "Exynos5 HS-I2C Driver" > + help > + Say Y here to include support for High Speed I2C controller in the > + Exynos5 series SoCs from Samsung. > + > config I2C_S6000 > tristate "S6000 I2C support" > depends on XTENSA_VARIANT_S6000 > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index 2d33d62..426b4fd 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -60,6 +60,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o > obj-$(CONFIG_I2C_PXA) += i2c-pxa.o > obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o > obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o > +obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o > obj-$(CONFIG_I2C_S6000) += i2c-s6000.o > obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o > obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o > diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c > new file mode 100644 > index 0000000..5983aa9 > --- /dev/null > +++ b/drivers/i2c/busses/i2c-exynos5.c > @@ -0,0 +1,758 @@ > +/* linux/drivers/i2c/busses/i2c-exynos5.c > + * > + * Copyright (C) 2012 Samsung Electronics Co., Ltd. > + * > + * Exynos5 series High Speed I2C controller driver > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include "i2c-exynos5.h" > + > +#define HSI2C_POLLING 0 > +#define HSI2C_FAST_SPD 0 > +#define HSI2C_HIGH_SPD 1 > + > +/* Max time to wait for bus to become idle after a xfer */ > +#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000)) > + > +struct exynos5_i2c { > + unsigned int suspended:1; > + > + struct i2c_msg *msg; > + struct completion msg_complete; > + unsigned int msg_byte_ptr; > + > + unsigned int irq; > + > + void __iomem *regs; > + struct clk *clk; > + struct device *dev; > + struct resource *ioarea; > + struct i2c_adapter adap; > + unsigned int bus_number; > + unsigned int speed_mode; > + unsigned int fast_speed; > + unsigned int high_speed; > + int operation_mode; > + int gpios[2]; > +}; > + > +static struct platform_device_id exynos5_driver_ids[] = { > + { > + .name = "exynos5-hs-i2c", > + .driver_data = 0, > + }, { }, > +}; > +MODULE_DEVICE_TABLE(platform, exynos5_driver_ids); > + > +#ifdef CONFIG_OF > +static const struct of_device_id exynos5_i2c_match[] = { > + { .compatible = "samsung,exynos5-hs-i2c", .data = (void *)0 }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, exynos5_i2c_match); > +#endif > + > +static inline void dump_i2c_register(struct exynos5_i2c *i2c) > +{ > + dev_dbg(i2c->dev, "Register dump(%d) :\n %x\n %x\n %x\n %x\n" > + " %x\n %x\n %x\n %x\n %x\n" > + " %x\n %x\n %x\n %x\n %x\n" > + " %x\n %x\n %x\n %x\n %x\n" > + " %x\n %x\n %x\n %x\n %x\n" > + , i2c->suspended > + , readl(i2c->regs + HSI2C_CTL) > + , readl(i2c->regs + HSI2C_FIFO_CTL) > + , readl(i2c->regs + HSI2C_TRAILIG_CTL) > + , readl(i2c->regs + HSI2C_CLK_CTL) > + , readl(i2c->regs + HSI2C_CLK_SLOT) > + , readl(i2c->regs + HSI2C_INT_ENABLE) > + , readl(i2c->regs + HSI2C_INT_STATUS) > + , readl(i2c->regs + HSI2C_ERR_STATUS) > + , readl(i2c->regs + HSI2C_FIFO_STATUS) > + , readl(i2c->regs + HSI2C_TX_DATA) > + , readl(i2c->regs + HSI2C_RX_DATA) > + , readl(i2c->regs + HSI2C_CONF) > + , readl(i2c->regs + HSI2C_AUTO_CONFING) > + , readl(i2c->regs + HSI2C_TIMEOUT) > + , readl(i2c->regs + HSI2C_MANUAL_CMD) > + , readl(i2c->regs + HSI2C_TRANS_STATUS) > + , readl(i2c->regs + HSI2C_TIMING_HS1) > + , readl(i2c->regs + HSI2C_TIMING_HS2) > + , readl(i2c->regs + HSI2C_TIMING_HS3) > + , readl(i2c->regs + HSI2C_TIMING_FS1) > + , readl(i2c->regs + HSI2C_TIMING_FS2) > + , readl(i2c->regs + HSI2C_TIMING_FS3) > + , readl(i2c->regs + HSI2C_TIMING_SLA) > + , readl(i2c->regs + HSI2C_ADDR)); > +} > + > +static inline void exynos5_i2c_stop(struct exynos5_i2c *i2c) > +{ > + writel(0, i2c->regs + HSI2C_INT_ENABLE); > + > + complete(&i2c->msg_complete); > +} > + > +static inline void exynos5_disable_irq(struct exynos5_i2c *i2c) > +{ > + unsigned long tmp = readl(i2c->regs + HSI2C_INT_STATUS); > + > + writel(tmp, i2c->regs + HSI2C_INT_STATUS); > +} > + > +static void exynos5_i2c_en_timeout(struct exynos5_i2c *i2c) > +{ > + unsigned long i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT); > + > + /* Clear to enable Timeout */ > + i2c_timeout &= ~HSI2C_TIMEOUT_EN; > + writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT); > +} > + > +static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) > +{ > + struct exynos5_i2c *i2c = dev_id; > + unsigned char byte; > + > + if (i2c->msg->flags & I2C_M_RD) { > + while ((readl(i2c->regs + HSI2C_FIFO_STATUS) & > + 0x1000000) == 0) { > + byte = (unsigned char)readl(i2c->regs + HSI2C_RX_DATA); > + i2c->msg->buf[i2c->msg_byte_ptr++] = byte; > + } > + > + if (i2c->msg_byte_ptr >= i2c->msg->len) > + exynos5_i2c_stop(i2c); > + } else { > + byte = i2c->msg->buf[i2c->msg_byte_ptr++]; > + writel(byte, i2c->regs + HSI2C_TX_DATA); > + > + if (i2c->msg_byte_ptr >= i2c->msg->len) > + exynos5_i2c_stop(i2c); > + } > + > + exynos5_disable_irq(i2c); > + > + return IRQ_HANDLED; > +} > + > +static int exynos5_i2c_init(struct exynos5_i2c *i2c); > + > +static int exynos5_i2c_reset(struct exynos5_i2c *i2c) > +{ > + unsigned long usi_ctl; > + > + usi_ctl = readl(i2c->regs + HSI2C_CTL); > + usi_ctl |= (1u << 31); > + writel(usi_ctl, i2c->regs + HSI2C_CTL); > + usi_ctl = readl(i2c->regs + HSI2C_CTL); > + usi_ctl &= ~(1u << 31); If the bit mask and bit position values are used more than once, it helps to define them as constants. > + writel(usi_ctl, i2c->regs + HSI2C_CTL); > + exynos5_i2c_init(i2c); > + > + return 0; > +} > + > +static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c, > + struct i2c_msg *msgs, int num, int stop) > +{ > + unsigned long timeout; > + unsigned long trans_status; > + unsigned long usi_fifo_stat; > + unsigned long usi_ctl; > + unsigned long i2c_auto_conf; > + unsigned long i2c_addr; > + unsigned long usi_int_en; > + unsigned long usi_fifo_ctl; > + unsigned char byte; > + int ret = 0; > + int operation_mode = i2c->operation_mode; > + > + i2c->msg = msgs; > + i2c->msg_byte_ptr = 0; > + > + init_completion(&i2c->msg_complete); > + > + usi_ctl = readl(i2c->regs + HSI2C_CTL); > + i2c_auto_conf = readl(i2c->regs + HSI2C_AUTO_CONFING); > + > + exynos5_i2c_en_timeout(i2c); > + > + /* Set default trigger level for TXFIFO and RXFIFO */ > + usi_fifo_ctl = HSI2C_TXFIFO_TRIGGER_LEVEL | > + HSI2C_RXFIFO_TRIGGER_LEVEL; > + /* Enable RXFIFO and TXFIFO */ > + usi_fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN; > + > + writel(usi_fifo_ctl, i2c->regs + HSI2C_FIFO_CTL); > + > + usi_int_en = 0; > + if (msgs->flags & I2C_M_RD) { > + usi_ctl &= ~HSI2C_TXCHON; > + usi_ctl |= HSI2C_RXCHON; > + > + i2c_auto_conf |= HSI2C_READ_WRITE; > + > + usi_int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN | > + HSI2C_INT_TRAILING_EN); > + } else { > + usi_ctl &= ~HSI2C_RXCHON; > + usi_ctl |= HSI2C_TXCHON; > + > + i2c_auto_conf &= ~HSI2C_READ_WRITE; > + > + usi_int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN; > + } > + > + if (stop == 1) > + i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS; > + else > + i2c_auto_conf &= ~HSI2C_STOP_AFTER_TRANS; > + > + > + i2c_addr = readl(i2c->regs + HSI2C_ADDR); > + > + /* Clear Slave Address for I2C Master (Auto mode only) */ > + i2c_addr &= ~(0x3ff << 10); > + /* Clear Slave Address for I2C Slave */ > + i2c_addr &= ~(0x3ff << 0); > + /* Clear Master ID for I2C Master (Auto and HS mode only) */ > + if (i2c->speed_mode == HSI2C_HIGH_SPD) > + i2c_addr &= ~(0xff << 24); > + > + i2c_addr |= ((msgs->addr & 0x7f) << 10); > + writel(i2c_addr, i2c->regs + HSI2C_ADDR); > + > + writel(usi_ctl, i2c->regs + HSI2C_CTL); > + > + /* Clear and set TRANS_LEN */ > + i2c_auto_conf &= ~(0xffff); > + i2c_auto_conf |= i2c->msg->len; > + writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONFING); > + > + /* Start data transfer in Master mode */ > + i2c_auto_conf = readl(i2c->regs + HSI2C_AUTO_CONFING); > + i2c_auto_conf |= HSI2C_MASTER_RUN; > + writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONFING); > + > + /* Enable appropriate interrupts */ > + if (operation_mode != HSI2C_POLLING) > + writel(usi_int_en, i2c->regs + HSI2C_INT_ENABLE); > + > + ret = -EAGAIN; > + if (msgs->flags & I2C_M_RD) { > + if (operation_mode == HSI2C_POLLING) { > + timeout = jiffies + EXYNOS5_I2C_TIMEOUT; > + while (time_before(jiffies, timeout)) { > + if ((readl(i2c->regs + HSI2C_FIFO_STATUS) & > + 0x1000000) == 0) { > + byte = (unsigned char)readl > + (i2c->regs + HSI2C_RX_DATA); > + i2c->msg->buf[i2c->msg_byte_ptr++] > + = byte; > + } > + > + if (i2c->msg_byte_ptr >= i2c->msg->len) { > + ret = 0; > + break; > + } > + } > + > + if (ret == -EAGAIN) { > + exynos5_i2c_reset(i2c); > + dev_warn(i2c->dev, "rx timeout\n"); > + return ret; > + } > + } else { > + timeout = wait_for_completion_interruptible_timeout > + (&i2c->msg_complete, EXYNOS5_I2C_TIMEOUT); > + > + if (timeout == 0) { > + exynos5_i2c_reset(i2c); > + dev_warn(i2c->dev, "rx timeout\n"); > + return ret; > + } > + > + ret = 0; > + } > + } else { > + if (operation_mode == HSI2C_POLLING) { > + timeout = jiffies + EXYNOS5_I2C_TIMEOUT; > + while (time_before(jiffies, timeout) && > + (i2c->msg_byte_ptr < i2c->msg->len)) { > + if ((readl(i2c->regs + HSI2C_FIFO_STATUS) > + & 0x7f) < 64) { > + byte = i2c->msg->buf > + [i2c->msg_byte_ptr++]; > + writel(byte, > + i2c->regs + HSI2C_TX_DATA); > + } > + } > + } else { > + timeout = wait_for_completion_interruptible_timeout > + (&i2c->msg_complete, EXYNOS5_I2C_TIMEOUT); > + > + if (timeout == 0) { > + exynos5_i2c_reset(i2c); > + dev_warn(i2c->dev, "tx timeout\n"); > + return ret; > + } > + > + timeout = jiffies + timeout; > + } > + while (time_before(jiffies, timeout)) { > + usi_fifo_stat = readl(i2c->regs + HSI2C_FIFO_STATUS); > + trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); > + if ((usi_fifo_stat == HSI2C_FIFO_EMPTY) && > + ((trans_status == 0) || > + ((stop == 0) && > + (trans_status == 0x20000)))) { > + ret = 0; > + break; > + } > + } > + if (ret == -EAGAIN) { > + exynos5_i2c_reset(i2c); > + dev_warn(i2c->dev, "tx timeout\n"); > + return ret; > + } > + } > + > + return ret; > +} > + > +static int exynos5_i2c_xfer(struct i2c_adapter *adap, > + struct i2c_msg *msgs, int num) > +{ > + struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data; > + int retry, i; > + int ret; > + int stop = 0; > + struct i2c_msg *msgs_ptr = msgs; > + > + if (i2c->suspended) { > + dev_err(i2c->dev, "HS-I2C is not initialzed.\n"); > + return -EIO; > + } > + > + clk_prepare_enable(i2c->clk); > + > + for (retry = 0; retry < adap->retries; retry++) { > + for (i = 0; i < num; i++) { > + if (i == num - 1) > + stop = 1; > + ret = exynos5_i2c_xfer_msg(i2c, msgs_ptr, 1, stop); > + msgs_ptr++; > + > + if (ret == -EAGAIN) { > + msgs_ptr = msgs; > + stop = 0; > + break; > + } > + } > + if (i == num) { > + clk_disable_unprepare(i2c->clk); > + return num; > + } > + > + dev_dbg(i2c->dev, "retrying transfer (%d)\n", retry); > + > + udelay(100); > + } > + > + clk_disable_unprepare(i2c->clk); > + > + return -EREMOTEIO; > +} > + > +static u32 exynos5_i2c_func(struct i2c_adapter *adap) > +{ > + return I2C_FUNC_I2C; > +} > + > +static const struct i2c_algorithm exynos5_i2c_algorithm = { > + .master_xfer = exynos5_i2c_xfer, > + .functionality = exynos5_i2c_func, > +}; > + > +static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c) > +{ > + unsigned long i2c_timing_s1; > + unsigned long i2c_timing_s2; > + unsigned long i2c_timing_s3; > + unsigned long i2c_timing_sla; > + unsigned int op_clk; > + unsigned int clkin = clk_get_rate(i2c->clk); > + unsigned int n_clkdiv; > + unsigned int t_start_su, t_start_hd; > + unsigned int t_stop_su; > + unsigned int t_data_su, t_data_hd; > + unsigned int t_scl_l, t_scl_h; > + unsigned int t_sr_release; > + unsigned int t_ftl_cycle; > + unsigned int i = 0, utemp0 = 0, utemp1 = 0, utemp2 = 0; > + > + if (i2c->speed_mode == HSI2C_HIGH_SPD) > + op_clk = i2c->high_speed; > + else > + op_clk = i2c->fast_speed; > + > + /* FPCLK / FI2C = > + * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE > + * uTemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) > + * uTemp1 = (TSCLK_L + TSCLK_H + 2) > + * uTemp2 = TSCLK_L + TSCLK_H > + */ > + t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7; > + utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle; > + > + /* CLK_DIV max is 256 */ > + for (i = 0; i < 256; i++) { > + utemp1 = utemp0 / (i + 1); > + /* SCLK_L/H max is 256 / 2 */ > + if (utemp1 < 128) { > + utemp2 = utemp1 - 2; > + break; > + } > + } > + > + n_clkdiv = i; > + t_scl_l = utemp2 / 2; > + t_scl_h = utemp2 / 2; > + t_start_su = t_scl_l; > + t_start_hd = t_scl_l; > + t_stop_su = t_scl_l; > + t_data_su = t_scl_l / 2; > + t_data_hd = t_scl_l / 2; > + t_sr_release = utemp2; > + > + i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8; > + i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0; > + i2c_timing_s3 = n_clkdiv << 16 | t_sr_release << 0; > + i2c_timing_sla = t_data_hd << 0; > + > + dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n", > + t_start_su, t_start_hd, t_stop_su); > + dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n", > + t_data_su, t_scl_l, t_scl_h); > + dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n", > + n_clkdiv, t_sr_release); > + dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd); > + > + if (i2c->speed_mode == HSI2C_HIGH_SPD) { > + writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1); > + writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2); > + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3); > + } else { > + writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1); > + writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2); > + writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3); > + } > + writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA); > + > + return 0; > +} > + > +#ifdef CONFIG_OF If this driver supports only device tree (as stated in the commit message), then this #ifdef can be avoided. > +static int exynos5_i2c_parse_dt_gpio(struct exynos5_i2c *i2c) > +{ > + int idx, gpio, ret; > + > + for (idx = 0; idx < 2; idx++) { > + gpio = of_get_gpio(i2c->dev->of_node, idx); > + if (!gpio_is_valid(gpio)) { > + dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio); > + goto free_gpio; > + } > + i2c->gpios[idx] = gpio; > + > + ret = gpio_request(gpio, "hsi2c-bus"); Using devm_gpio_request here can simplify the error handling path. > + if (ret) { > + dev_err(i2c->dev, "gpio [%d] request failed\n", gpio); > + goto free_gpio; > + } > + } > + return 0; > + > +free_gpio: > + while (--idx >= 0) > + gpio_free(i2c->gpios[idx]); > + return -EINVAL; > +} > + > +static void exynos5_i2c_dt_gpio_free(struct exynos5_i2c *i2c) > +{ > + unsigned int idx; > + > + for (idx = 0; idx < 2; idx++) > + gpio_free(i2c->gpios[idx]); > +} > +#else > +static int exynos5_i2c_parse_dt_gpio(struct exynos5_i2c *i2c) > +{ > + return 0; > +} > + > +static void exynos5_i2c_dt_gpio_free(struct exynos5_i2c *i2c) > +{ > +} > +#endif > + > +static int exynos5_i2c_init(struct exynos5_i2c *i2c) > +{ > + unsigned long usi_ctl = HSI2C_FUNC_MODE_I2C | HSI2C_MASTER; > + unsigned long usi_trailing_ctl = HSI2C_TRAILING_COUNT; > + unsigned long i2c_conf = readl(i2c->regs + HSI2C_CONF); > + > + if (exynos5_i2c_parse_dt_gpio(i2c)) > + return -EINVAL; > + > + writel(usi_ctl, i2c->regs + HSI2C_CTL); > + > + writel(usi_trailing_ctl, i2c->regs + HSI2C_TRAILIG_CTL); > + > + exynos5_i2c_set_timing(i2c); > + > + if (i2c->speed_mode == HSI2C_HIGH_SPD) { > + i2c_conf |= HSI2C_HS_MODE; > + writel(i2c_conf, i2c->regs + HSI2C_CONF); > + } > + > + return 0; > +} > + > +static int exynos5_i2c_probe(struct platform_device *pdev) > +{ > + struct exynos5_i2c *i2c; > + struct resource *res; > + int ret; > + > + i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL); > + if (!i2c) { > + dev_err(&pdev->dev, "no memory for state\n"); > + return -ENOMEM; > + } > + > + if (pdev->dev.of_node) { > + /* i2c bus number is dynamically assigned */ > + i2c->bus_number = -1; > + > + if (of_property_read_u32(pdev->dev.of_node, > + "samsung,hsi2c-speed-mode", &i2c->speed_mode)) > + i2c->speed_mode = 1; > + if (!of_property_read_u32(pdev->dev.of_node, > + "samsung,hsi2c-hs-clk", &i2c->high_speed)) > + i2c->high_speed = 2500000; > + if (!of_property_read_u32(pdev->dev.of_node, > + "samsung,hsi2c-fs-clk", &i2c->fast_speed)) > + i2c->fast_speed = 400000; > + } else { > + dev_err(&pdev->dev, "no device node\n"); > + return -ENOENT; > + } > + > + strlcpy(i2c->adap.name, "exynos5250-i2c", sizeof(i2c->adap.name)); > + i2c->adap.owner = THIS_MODULE; > + i2c->adap.algo = &exynos5_i2c_algorithm; > + i2c->adap.retries = 2; > + i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; > + > + i2c->dev = &pdev->dev; > + i2c->clk = clk_get(&pdev->dev, "hsi2c"); > + if (IS_ERR(i2c->clk)) { > + dev_err(&pdev->dev, "cannot get clock\n"); > + ret = -ENOENT; > + goto err_noclk; > + } > + > + clk_prepare_enable(i2c->clk); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (res == NULL) { > + dev_err(&pdev->dev, "cannot find HS-I2C IO resource\n"); > + ret = -ENOENT; > + goto err_clk; > + } > + > + i2c->ioarea = request_mem_region(res->start, resource_size(res), > + pdev->name); Since this is dt-only driver, use of_iomap here. > + > + if (i2c->ioarea == NULL) { > + dev_err(&pdev->dev, "cannot request HS-I2C IO\n"); > + ret = -ENXIO; > + goto err_clk; > + } > + > + i2c->regs = ioremap(res->start, resource_size(res)); > + > + if (i2c->regs == NULL) { > + dev_err(&pdev->dev, "cannot map HS-I2C IO\n"); > + ret = -ENXIO; > + goto err_ioarea; > + } > + > + dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", > + i2c->regs, i2c->ioarea, res); > + > + i2c->adap.algo_data = i2c; > + i2c->adap.dev.parent = &pdev->dev; > + > + ret = exynos5_i2c_init(i2c); > + if (ret != 0) > + goto err_iomap; > + > + i2c->irq = ret = platform_get_irq(pdev, 0); irq_of_parse_and_map() here. > + if (ret <= 0) { > + dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n"); > + goto err_iomap; > + } > + > + ret = request_irq(i2c->irq, exynos5_i2c_irq, IRQF_DISABLED, > + dev_name(&pdev->dev), i2c); > + > + if (ret != 0) { > + dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq); > + goto err_iomap; > + } > + > + i2c->adap.nr = i2c->bus_number; > + i2c->adap.dev.of_node = pdev->dev.of_node; > + > + ret = i2c_add_numbered_adapter(&i2c->adap); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to add bus to i2c core\n"); > + goto err_irq; > + } > + > + of_i2c_register_devices(&i2c->adap); > + platform_set_drvdata(pdev, i2c); > + > + dev_info(&pdev->dev, "%s: Exynos5 HS-I2C adapter\n", > + dev_name(&i2c->adap.dev)); > + clk_disable_unprepare(i2c->clk); > + return 0; > + > + err_irq: > + free_irq(i2c->irq, i2c); > + > + err_iomap: > + iounmap(i2c->regs); > + > + err_ioarea: > + release_resource(i2c->ioarea); > + kfree(i2c->ioarea); > + > + err_clk: > + clk_disable_unprepare(i2c->clk); > + clk_put(i2c->clk); > + > + err_noclk: > + return ret; > +} > + > +static int exynos5_i2c_remove(struct platform_device *pdev) > +{ > + struct exynos5_i2c *i2c = platform_get_drvdata(pdev); > + > + i2c_del_adapter(&i2c->adap); > + free_irq(i2c->irq, i2c); > + > + clk_disable_unprepare(i2c->clk); > + clk_put(i2c->clk); > + > + iounmap(i2c->regs); > + > + release_resource(i2c->ioarea); > + exynos5_i2c_dt_gpio_free(i2c); > + kfree(i2c->ioarea); > + > + return 0; > +} > + > +#ifdef CONFIG_PM > +static int exynos5_i2c_suspend_noirq(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct exynos5_i2c *i2c = platform_get_drvdata(pdev); > + > + i2c_lock_adapter(&i2c->adap); > + i2c->suspended = 1; > + i2c_unlock_adapter(&i2c->adap); > + > + return 0; > +} > + > +static int exynos5_i2c_resume(struct device *dev) > +{ > + struct platform_device *pdev = to_platform_device(dev); > + struct exynos5_i2c *i2c = platform_get_drvdata(pdev); > + > + i2c_lock_adapter(&i2c->adap); > + clk_prepare_enable(i2c->clk); > + exynos5_i2c_init(i2c); > + clk_disable_unprepare(i2c->clk); > + i2c->suspended = 0; > + i2c_unlock_adapter(&i2c->adap); > + > + return 0; > +} > + > +static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = { > + .suspend_noirq = exynos5_i2c_suspend_noirq, > + .resume_noirq = exynos5_i2c_resume, > +}; > + > +#define EXYNOS5_DEV_PM_OPS (&exynos5_i2c_dev_pm_ops) > +#else > +#define EXYNOS5_DEV_PM_OPS NULL > +#endif > + > +static struct platform_driver exynos5_i2c_driver = { > + .probe = exynos5_i2c_probe, > + .remove = exynos5_i2c_remove, > + .id_table = exynos5_driver_ids, > + .driver = { > + .owner = THIS_MODULE, > + .name = "exynos5-i2c", > + .pm = EXYNOS5_DEV_PM_OPS, > + .of_match_table = of_match_ptr(exynos5_i2c_match), > + }, > +}; > + > +static int __init i2c_adap_exynos5_init(void) > +{ > + return platform_driver_register(&exynos5_i2c_driver); > +} > +subsys_initcall(i2c_adap_exynos5_init); > + > +static void __exit i2c_adap_exynos5_exit(void) > +{ > + platform_driver_unregister(&exynos5_i2c_driver); > +} > +module_exit(i2c_adap_exynos5_exit); > + > +MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver"); > +MODULE_AUTHOR("Taekgyun Ko, "); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/i2c/busses/i2c-exynos5.h b/drivers/i2c/busses/i2c-exynos5.h > new file mode 100644 > index 0000000..063051e > --- /dev/null > +++ b/drivers/i2c/busses/i2c-exynos5.h > @@ -0,0 +1,80 @@ > +/* > + * Copyright (C) 2012 Samsung Electronics Co., Ltd. > + * > + * Exynos5 series HS-I2C Controller > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_ARCH_REGS_HS_IIC_H > +#define __ASM_ARCH_REGS_HS_IIC_H __FILE__ > + > +/* > + * Register Map > + */ > +#define HSI2C_CTL 0x00 > +#define HSI2C_FIFO_CTL 0x04 > +#define HSI2C_TRAILIG_CTL 0x08 > +#define HSI2C_CLK_CTL 0x0C > +#define HSI2C_CLK_SLOT 0x10 > +#define HSI2C_INT_ENABLE 0x20 > +#define HSI2C_INT_STATUS 0x24 > +#define HSI2C_ERR_STATUS 0x2C > +#define HSI2C_FIFO_STATUS 0x30 > +#define HSI2C_TX_DATA 0x34 > +#define HSI2C_RX_DATA 0x38 > +#define HSI2C_CONF 0x40 > +#define HSI2C_AUTO_CONFING 0x44 > +#define HSI2C_TIMEOUT 0x48 > +#define HSI2C_MANUAL_CMD 0x4C > +#define HSI2C_TRANS_STATUS 0x50 > +#define HSI2C_TIMING_HS1 0x54 > +#define HSI2C_TIMING_HS2 0x58 > +#define HSI2C_TIMING_HS3 0x5C > +#define HSI2C_TIMING_FS1 0x60 > +#define HSI2C_TIMING_FS2 0x64 > +#define HSI2C_TIMING_FS3 0x68 > +#define HSI2C_TIMING_SLA 0x6C > +#define HSI2C_ADDR 0x70 > + > +/* I2C_CTL Register */ > +#define HSI2C_FUNC_MODE_I2C (1u << 0) > +#define HSI2C_MASTER (1u << 3) > +#define HSI2C_RXCHON (1u << 6) > +#define HSI2C_TXCHON (1u << 7) > + > +/* I2C_FIFO_CTL Register */ > +#define HSI2C_RXFIFO_EN (1u << 0) > +#define HSI2C_TXFIFO_EN (1u << 1) > +#define HSI2C_TXFIFO_TRIGGER_LEVEL (0x20 << 16) > +#define HSI2C_RXFIFO_TRIGGER_LEVEL (0x20 << 4) > + > +/* I2C_TRAILING_CTL Register */ > +#define HSI2C_TRAILING_COUNT (0xf) > + > +/* I2C_INT_EN Register */ > +#define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0) /* For TX FIFO */ > +#define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1) /* For RX FIFO */ > +#define HSI2C_INT_TRAILING_EN (1u << 6) > + > +/* I2C_CONF Register */ > +#define HSI2C_AUTO_MODE (1u << 31) > +#define HSI2C_10BIT_ADDR_MODE (1u << 30) > +#define HSI2C_HS_MODE (1u << 29) > + > +/* I2C_AUTO_CONF Register */ > +#define HSI2C_READ_WRITE (1u << 16) > +#define HSI2C_STOP_AFTER_TRANS (1u << 17) > +#define HSI2C_MASTER_RUN (1u << 31) > + > +/* I2C_TIMEOUT Register */ > +#define HSI2C_TIMEOUT_EN (1u << 31) > + > +#define HSI2C_FIFO_EMPTY (0x1000100) > + > +#define HSI2C_FS_BPS 400000 > +#define HSI2C_HS_BPS 2500000 > + > +#endif /* __ASM_ARCH_REGS_HS_IIC_H */ Since these constants are only use in i2c-exynos5.c file, it is better to move these definitions into i2c-exynos5.c file. Thanks, Thomas. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/