Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755965Ab2K1Srm (ORCPT ); Wed, 28 Nov 2012 13:47:42 -0500 Received: from mail-da0-f46.google.com ([209.85.210.46]:51846 "EHLO mail-da0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752982Ab2K1Srk (ORCPT ); Wed, 28 Nov 2012 13:47:40 -0500 From: Viresh Kumar To: sameo@linux.intel.com, grant.likely@secretlab.ca, rabin.vincent@stericsson.com, shiraz.hashim@st.com Cc: devicetree-discuss@lists.ozlabs.org, linux-kernel@vger.kernel.org, spear-devel@list.st.com, lee.jones@linaro.org, linus.walleij@linaro.org, Vipul Kumar Samar , Viresh Kumar Subject: [PATCH V4 Resend 3/3] mfd: stmpe: Update DT support in stmpe driver Date: Thu, 29 Nov 2012 00:17:17 +0530 Message-Id: X-Mailer: git-send-email 1.7.12.rc2.18.g61b472e In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6301 Lines: 184 From: Vipul Kumar Samar This patch extends existing DT support for stmpe devices. This updates: - DT support from stmpe SPI and I2C drivers - missing header files in stmpe.c - stmpe_of_probe() with pwm, rotator and new bindings. - Bindings are updated in binding document. Signed-off-by: Vipul Kumar Samar Signed-off-by: Viresh Kumar --- V3->V4: - Remove need to pass irq type and polarity from DT. - Remove need to pass id from platform data. Documentation/devicetree/bindings/mfd/stmpe.txt | 9 ++++++--- drivers/mfd/stmpe-i2c.c | 15 +++++++++++++++ drivers/mfd/stmpe-spi.c | 15 +++++++++++++++ drivers/mfd/stmpe.c | 22 ++++++++++++++++------ 4 files changed, 52 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index 8f0aeda..d2d88d9 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -1,8 +1,11 @@ -* STMPE Multi-Functional Device +* ST Microelectronics STMPE Multi-Functional Device + +STMPE is an MFD device which may expose following inbuilt devices: gpio, keypad, +touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[811|1601|2401|2403]" - - reg : I2C address of the device + - compatible : "st,stmpe[610|801|811|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - interrupts : The interrupt outputs from the controller diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index c734dc3..003c49b 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "stmpe.h" @@ -81,6 +82,19 @@ static const struct i2c_device_id stmpe_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, stmpe_id); +#ifdef CONFIG_OF +static const struct of_device_id stmpe_dt_ids[] = { + { .compatible = "st,stmpe610", .data = &stmpe_i2c_id[0], }, + { .compatible = "st,stmpe801", .data = &stmpe_i2c_id[1], }, + { .compatible = "st,stmpe811", .data = &stmpe_i2c_id[2], }, + { .compatible = "st,stmpe1601", .data = &stmpe_i2c_id[3], }, + { .compatible = "st,stmpe2401", .data = &stmpe_i2c_id[4], }, + { .compatible = "st,stmpe2403", .data = &stmpe_i2c_id[5], }, + { } +}; +MODULE_DEVICE_TABLE(of, stmpe_dt_ids); +#endif + static struct i2c_driver stmpe_i2c_driver = { .driver = { .name = "stmpe-i2c", @@ -88,6 +102,7 @@ static struct i2c_driver stmpe_i2c_driver = { #ifdef CONFIG_PM .pm = &stmpe_dev_pm_ops, #endif + .of_match_table = of_match_ptr(stmpe_dt_ids), }, .probe = stmpe_i2c_probe, .remove = __devexit_p(stmpe_i2c_remove), diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c index 9edfe86..1e2bff0 100644 --- a/drivers/mfd/stmpe-spi.c +++ b/drivers/mfd/stmpe-spi.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include "stmpe.h" @@ -119,6 +120,19 @@ static const struct spi_device_id stmpe_spi_id[] = { }; MODULE_DEVICE_TABLE(spi, stmpe_id); +#ifdef CONFIG_OF +static const struct of_device_id stmpe_dt_ids[] = { + { .compatible = "st,stmpe610", .data = (void *)STMPE610, }, + { .compatible = "st,stmpe801", .data = (void *)STMPE801, }, + { .compatible = "st,stmpe811", .data = (void *)STMPE811, }, + { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, }, + { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, }, + { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, }, + { } +}; +MODULE_DEVICE_TABLE(of, stmpe_dt_ids); +#endif + static struct spi_driver stmpe_spi_driver = { .driver = { .name = "stmpe-spi", @@ -126,6 +140,7 @@ static struct spi_driver stmpe_spi_driver = { #ifdef CONFIG_PM .pm = &stmpe_dev_pm_ops, #endif + .of_match_table = of_match_ptr(stmpe_dt_ids), }, .probe = stmpe_spi_probe, .remove = __devexit_p(stmpe_spi_remove), diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 10819e6..88cd8e5 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -7,12 +7,15 @@ * Author: Rabin Vincent for ST-Ericsson */ +#include #include #include #include #include #include #include +#include +#include #include #include #include @@ -1021,6 +1024,12 @@ void __devinit stmpe_of_probe(struct stmpe_platform_data *pdata, { struct device_node *child; + /* + * Distinct names of same cell-type within multiple instances of stmpe + * will be guaranteed by DT. + */ + pdata->id = -1; + of_property_read_u32(np, "st,autosleep-timeout", &pdata->autosleep_timeout); @@ -1029,15 +1038,16 @@ void __devinit stmpe_of_probe(struct stmpe_platform_data *pdata, for_each_child_of_node(np, child) { if (!strcmp(child->name, "stmpe_gpio")) { pdata->blocks |= STMPE_BLOCK_GPIO; - } - if (!strcmp(child->name, "stmpe_keypad")) { + } else if (!strcmp(child->name, "stmpe_keypad")) { pdata->blocks |= STMPE_BLOCK_KEYPAD; - } - if (!strcmp(child->name, "stmpe_touchscreen")) { + } else if (!strcmp(child->name, "stmpe_touchscreen")) { pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN; - } - if (!strcmp(child->name, "stmpe_adc")) { + } else if (!strcmp(child->name, "stmpe_adc")) { pdata->blocks |= STMPE_BLOCK_ADC; + } else if (!strcmp(child->name, "stmpe_pwm")) { + pdata->blocks |= STMPE_BLOCK_PWM; + } else if (!strcmp(child->name, "stmpe_rotator")) { + pdata->blocks |= STMPE_BLOCK_ROTATOR; } } } -- 1.7.12.rc2.18.g61b472e -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/