Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932140Ab3CDQOq (ORCPT ); Mon, 4 Mar 2013 11:14:46 -0500 Received: from cantor2.suse.de ([195.135.220.15]:52427 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758412Ab3CDQOp (ORCPT ); Mon, 4 Mar 2013 11:14:45 -0500 From: Thomas Renninger To: Alan Stern Cc: Hannes Reinecke , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Bjorn Helgaas , Oliver Neukum , Yinghai Lu , Frederik Himpe , David Haerdeman Subject: [PATCH][v3] xhci: correctly enable interrupts Date: Mon, 04 Mar 2013 17:14:43 +0100 Message-ID: <1742014.AbCVskUi8i@skinner.arch.suse.de> Organization: SUSE Products GmbH User-Agent: KMail/4.10 (Linux/3.7.7-1.2-desktop; KDE/4.10.0; x86_64; ; ) In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3150 Lines: 96 From: Hannes Reinecke xhci has its own interrupt enabling routine, which will try to use MSI-X/MSI if present. So the usb core shouldn't try to enable legacy interrupts; on some machines the xhci legacy IRQ setting is invalid. v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn) Cc: Bjorn Helgaas Cc: Oliver Neukum Cc: Thomas Renninger Cc: Yinghai Lu Cc: Frederik Himpe Cc: David Haerdeman Cc: Alan Stern Reviewed-by: Thomas Renninger Signed-off-by: Hannes Reinecke diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 622b4a4..2b487d4 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct hc_driver *driver; struct usb_hcd *hcd; int retval; + int hcd_irq = 0; if (usb_disabled()) return -ENODEV; @@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; dev->current_state = PCI_D0; - /* The xHCI driver supports MSI and MSI-X, - * so don't fail if the BIOS doesn't provide a legacy IRQ. + /* + * The xHCI driver has its own irq management + * make sure irq setup is not touched for xhci in generic hcd code */ - if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) { - dev_err(&dev->dev, - "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", - pci_name(dev)); - retval = -ENODEV; - goto disable_pci; + if ((driver->flags & HCD_MASK) != HCD_USB3) { + if (!dev->irq) { + dev_err(&dev->dev, + "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", + pci_name(dev)); + retval = -ENODEV; + goto disable_pci; + } + hcd_irq = dev->irq; } hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev)); @@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) pci_set_master(dev); - retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); if (retval != 0) goto unmap_registers; set_hs_companion(dev, hcd); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f1f01a8..849470b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) * generate interrupts. Don't even try to enable MSI. */ if (xhci->quirks & XHCI_BROKEN_MSI) - return 0; + goto legacy_irq; /* unregister the legacy interrupt */ if (hcd->irq) @@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) return -EINVAL; } + legacy_irq: /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/