Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755463Ab3CGNSU (ORCPT ); Thu, 7 Mar 2013 08:18:20 -0500 Received: from slimlogic.co.uk ([89.16.172.20]:60766 "EHLO slimlogic.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752124Ab3CGNSS (ORCPT ); Thu, 7 Mar 2013 08:18:18 -0500 From: Ian Lartey To: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org, linux-watchdog@vger.kernel.org, swarren@wwwdotorg.org, grant.likely@secretlab.ca, broonie@opensource.wolfsonmicro.com, rob.herring@calxeda.com, rob@landley.net, mturquette@linaro.org, linus.walleij@linaro.org, cooloney@gmail.com, rpurdie@rpsys.net, sameo@linux.intel.com, wim@iguana.be, lgirdwood@gmail.com, gg@slimlogic.co.uk, j-keerthy@ti.com, ldewangan@nvidia.com, t-kristo@ti.com, Ian Lartey Subject: [PATCH v8 01/12] mfd: DT bindings for the palmas family MFD Date: Thu, 7 Mar 2013 13:17:45 +0000 Message-Id: <1362662276-20792-1-git-send-email-ian@slimlogic.co.uk> X-Mailer: git-send-email 1.7.0.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13255 Lines: 468 From: Graeme Gregory Add the various binding files for the palmas family of chips. There is a top level MFD binding then a seperate binding for IP blocks on chips. Signed-off-by: Graeme Gregory Signed-off-by: J Keerthy Signed-off-by: Ian Lartey --- .../devicetree/bindings/clock/palmas-clk.txt | 25 +++ .../devicetree/bindings/gpio/gpio-palmas.txt | 21 +++ .../devicetree/bindings/input/palmas-pwrbutton.txt | 22 +++ .../devicetree/bindings/leds/leds-palmas.txt | 35 ++++ Documentation/devicetree/bindings/mfd/palmas.txt | 70 ++++++++ .../devicetree/bindings/regulator/palmas-pmic.txt | 168 ++++++++++++++++++++ .../devicetree/bindings/rtc/palmas-rtc.txt | 22 +++ .../devicetree/bindings/watchdog/palmas-wdt.txt | 22 +++ 8 files changed, 385 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/palmas-clk.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-palmas.txt create mode 100644 Documentation/devicetree/bindings/input/palmas-pwrbutton.txt create mode 100644 Documentation/devicetree/bindings/leds/leds-palmas.txt create mode 100644 Documentation/devicetree/bindings/mfd/palmas.txt create mode 100644 Documentation/devicetree/bindings/regulator/palmas-pmic.txt create mode 100644 Documentation/devicetree/bindings/rtc/palmas-rtc.txt create mode 100644 Documentation/devicetree/bindings/watchdog/palmas-wdt.txt diff --git a/Documentation/devicetree/bindings/clock/palmas-clk.txt b/Documentation/devicetree/bindings/clock/palmas-clk.txt new file mode 100644 index 0000000..a17bc62 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/palmas-clk.txt @@ -0,0 +1,25 @@ +* palmas and palmas-charger resource clock IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-clk + ti,twl6036-clk + ti,twl6037-clk + ti,tps65913-clk + ti,tps65914-clk + ti,tps80036-clk +and also the generic series names + ti,palmas-clk + ti,palmas-charger-clk + +Optional properties: +- ti,clk32g-mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - on +- ti,clkg32kgaudio-mode-sleep - see above + +Examples: + +clk { + compatible = "ti,twl6035-clk", "ti,palmas-clk"; + ti,clk32kg-mode-sleep = <0>; + ti,clk32kgaudio-mode-sleep = <0>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt new file mode 100644 index 0000000..0b1c629 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt @@ -0,0 +1,21 @@ +* palmas and palmas charger GPIO IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-gpio + ti,twl6036-gpio + ti,twl6037-gpio + ti,tps65913-gpio + ti,tps65914-gpio + ti,tps80036-gpio + +and also the generic series names + + ti,palmas-gpio + ti,palmas-charger-gpio + +Examples: + +gpio { + compatible = "ti,twl6035-gpio", "ti,palmas-gpio"; +}; diff --git a/Documentation/devicetree/bindings/input/palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/palmas-pwrbutton.txt new file mode 100644 index 0000000..00739e9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/palmas-pwrbutton.txt @@ -0,0 +1,22 @@ +* palmas and palmas-charger Button IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-pwrbutton + ti,twl6036-pwrbutton + ti,twl6037-pwrbutton + ti,tps65913-pwrbutton + ti,tps65914-pwrbutton + ti,tps80036-pwrbutton +and also the generic series names + ti,palmas-pwrbutton + ti,palmas-charger-pwrbutton + +Examples: + +pwrbutton { + compatible = "ti,twl6035-pwrbutton", "ti,palmas-pwrbutton"; + interrupt-parent = <&palmas>; + interrupts = <1 0>; + interrupt-name = "pwron-irq"; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-palmas.txt b/Documentation/devicetree/bindings/leds/leds-palmas.txt new file mode 100644 index 0000000..9a67858 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-palmas.txt @@ -0,0 +1,35 @@ +* palmas and palmas-charger LED IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-leds + ti,twl6036-leds + ti,twl6037-leds + ti,tps65913-leds + ti,tps65914-leds + ti,tps80036-leds +and also the generic series names + ti,palmas-leds + ti,palmas-charger-leds + +Optional properties: +-ti,led1-current - sink current setting 0 - 0mA, 1 - 25mA, 2 - 5mA, + 3 - 0mA, 4 - 5mA, 5 - 5mA, 6 - 10.0mA, 7 - 0mA +-ti,led2-current - see above +-ti,led3-current - see above +-ti,led4-current - see above +-ti,chrg-led-mode - mode for led operation 0 - Charging indicator + 1 - controlled as a general purpose LED +-ti,chrg-led-vbat-low - low battery blinking 0 - blinking is enabled, + 1 - blinking is disabled + +Examples: +leds { + compatible = "ti,twl6035-leds", "ti,palmas-leds"; + ti,led1-current = <0>; + ti,led2-current = <0>; + ti,led3-current = <0>; + ti,led4-current = <0>; + ti,chrg-led-mode = <0>; + ti,chrg-led-vbat-low = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt new file mode 100644 index 0000000..cb34e1f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -0,0 +1,70 @@ +* palmas and palmas-charger device tree bindings + +The TI palmas family current members :- +twl6035 (palmas) +twl6036 (palmas-charger) +twl6037 (palmas) +tps65913 (palmas) +tps65914 (palmas) +tps80036 (palmas-charger) + +Required properties: +- compatible : Should be from the list + ti,twl6035 + ti,twl6036 + ti,twl6037 + ti,tps65913 + ti,tps65914 + ti,tps80036 +and also the generic series names + ti,palmas + ti,palmas-charger +- interrupt-controller : palmas has its own internal IRQs +- #interrupt-cells : should be set to 2 for IRQ number and flags + +Optional properties: + ti,mux_padX : set the pad register X (1-2) to the correct muxing for the hardware, + if not set will use muxing in OTP. + +palmas { + compatible = "ti,twl6035", "ti,palmas"; + interrupt-controller; + #interrupt-cells = <2>; + + ti,mux-pad1 = <0>; + ti,mux-pad2 = <0>; + + pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + .... + } + + gpio { + compatible = "ti,twl6035-gpio", "ti,palmas-gpio"; + .... + }; + + wdt { + compatible = "ti,twl6035-wdt", "ti,palmas-wdt"; + .... + }; + + rtc { + compatible = "ti,twl6035-rtc", "ti,palmas-rtc"; + .... + }; + + pwrbutton { + compatible = "ti,twl6035-pwrbutton", "ti,palmas-pwrbutton"; + .... + }; + + leds { + compatible = "ti,twl6035-leds", "ti-palmas-leds"; + } + + clk { + compatible = "ti,twl6035-clk", "ti,palmas-clk"; + .... + }; +} diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt new file mode 100644 index 0000000..9654179 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -0,0 +1,168 @@ +* palmas and palmas-charger regulator IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-pmic + ti,twl6036-pmic + ti,twl6037-pmic + ti,tps65913-pmic + ti,tps65914-pmic + ti,tps80036-pmic +and also the generic series names + ti,palmas-pmic + ti,palmas-charger-pmic + +Optional properties: +- regulators : should contain the constrains and init information for the + regulators. It should contain a subnode per regulator from the + list. + For palmas - smps12, smps123, smps3 depending on OTP, + smps45, smps457, smps7 depending on varient, smps6, smps[8-10], + ldo[1-9], ldoln, ldousb + For palmas-charger - smps12, smps123, smps3 depending on OTP, + smps[6-9], boost, ldo[1-14], ldoln, ldousb + + optional chip specific regulator fields :- + ti,warm-reset - maintain voltage during warm reset + ti,roof-floor - control voltage selection by pin + ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco + 3 - forced pwm + ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us + ti,smps-range - OTP has the wrong range set for the hardware so override + 0 - low range, 1 - high range + +- ti,ldo6-vibrator : ldo6 is in vibrator mode + +Examples: + +pmic@0 { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 0>; + interrupt-name = "short-irq"; + + ti,ldo6_vibrator; + + regulators { + smps12_reg : smps12 { + regulator-name = "smps12"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,warm-reset; + ti,roof-floor; + ti,mode-sleep = <0>; + ti,tstep = <0>; + ti,smps-range = <1>; + }; + + smps3_reg: smps3 { + regulator-name = "smps3"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + }; + + smps45_reg: smps45 { + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + }; + + smps6_reg: smps6 { + regulator-name = "smps6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + smps7_reg: smps7 { + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + smps8_reg: smps8 { + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + }; + + smps9_reg: smps9 { + regulator-name = "smps9"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + smps10_reg: smps10 { + regulator-name = "smps10"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldoln_reg: ldoln { + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldousb_reg: ldousb { + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/rtc/palmas-rtc.txt b/Documentation/devicetree/bindings/rtc/palmas-rtc.txt new file mode 100644 index 0000000..4e779c4 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/palmas-rtc.txt @@ -0,0 +1,22 @@ +* palmas and palmas-charger RTC IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-rtc + ti,twl6036-rtc + ti,twl6037-rtc + ti,tps65913-rtc + ti,tps65914-rtc + ti,tps80036-rtc +and also the generic series names + ti,palmas-rtc + ti,palmas-charger-rtc + +Examples: + +rtc { + compatible = "ti,twl6035-rtc", "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0 9 0>; + interrupt-name = "alarm-irq", "timer-irq"; +}; diff --git a/Documentation/devicetree/bindings/watchdog/palmas-wdt.txt b/Documentation/devicetree/bindings/watchdog/palmas-wdt.txt new file mode 100644 index 0000000..1720f2e --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/palmas-wdt.txt @@ -0,0 +1,22 @@ +* palmas and palmas-charger Watchdog IP block devicetree bindings + +Required properties: +- compatible : Should be from the list + ti,twl6035-wdt + ti,twl6036-wdt + ti,twl6037-wdt + ti,tps65913-wdt + ti,tps65914-wdt + ti,tps80036-wdt +and also the generic series names + ti,palmas-wdt + ti,palmas-charger-wdt + +Examples: + +wdt { + compatible = "ti,twl6035-wdt", "ti,palmas-wdt"; + interrupt-parent = <&palmas>; + interrupts = <10 0>; + interrupt-name = "watchdog-irq"; +}; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/