Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753562Ab3CMEw1 (ORCPT ); Wed, 13 Mar 2013 00:52:27 -0400 Received: from mail.active-venture.com ([67.228.131.205]:55265 "EHLO mail.active-venture.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750932Ab3CMEw0 (ORCPT ); Wed, 13 Mar 2013 00:52:26 -0400 X-Originating-IP: 108.223.40.66 Date: Tue, 12 Mar 2013 21:52:26 -0700 From: Guenter Roeck To: Naveen Krishna Chatradhi Cc: linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org, devicetree-discuss@lists.ozlabs.org, khali@linux-fr.org, dianders@chromium.org, naveenkrishna.ch@gmail.com Subject: Re: [PATCH v4] hwmon: ntc: Add DT with IIO support to NTC thermistor driver Message-ID: <20130313045226.GA15611@roeck-us.net> References: <1363077566-6254-1-git-send-email-ch.naveen@samsung.com> <1363147700-7042-1-git-send-email-ch.naveen@samsung.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1363147700-7042-1-git-send-email-ch.naveen@samsung.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11701 Lines: 361 On Wed, Mar 13, 2013 at 09:38:20AM +0530, Naveen Krishna Chatradhi wrote: > This patch adds DT support to NTC driver to parse the > platform data. > > Also adds the support to work as an iio device. > > During the probe ntc driver gets the respective channels of ADC > and uses iio_raw_read calls to get the ADC converted value. > > Signed-off-by: Naveen Krishna Chatradhi Unfortunately there is still something we'll need to sort out: fs/sysfs/Kconfig:1: symbol SYSFS is selected by AT91_ADC drivers/iio/adc/Kconfig:85: symbol AT91_ADC depends on IIO drivers/iio/Kconfig:5: symbol IIO is selected by SENSORS_NTC_THERMISTOR drivers/hwmon/Kconfig:900: symbol SENSORS_NTC_THERMISTOR depends on HWMON drivers/hwmon/Kconfig:5: symbol HWMON is selected by EEEPC_LAPTOP drivers/platform/x86/Kconfig:477: symbol EEEPC_LAPTOP depends on HOTPLUG_PCI drivers/pci/hotplug/Kconfig:5: symbol HOTPLUG_PCI depends on SYSFS So we can not just select IIO. I'll see if I can find a solution. Guenter > --- > Changes since v3: > 1. Added a NULL check before iio_channel_release > 2. Modified a return statement > > Guenter Roeck, Its wonderful working with you. Thanks. > > .../devicetree/bindings/hwmon/ntc_thermistor.txt | 29 ++++ > drivers/hwmon/Kconfig | 1 + > drivers/hwmon/ntc_thermistor.c | 145 +++++++++++++++++--- > include/linux/platform_data/ntc_thermistor.h | 8 +- > 4 files changed, 163 insertions(+), 20 deletions(-) > create mode 100644 Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt > new file mode 100644 > index 0000000..c6f6667 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt > @@ -0,0 +1,29 @@ > +NTC Thermistor hwmon sensors > +------------------------------- > + > +Requires node properties: > +- "compatible" value : one of > + "ntc,ncp15wb473" > + "ntc,ncp18wb473" > + "ntc,ncp21wb473" > + "ntc,ncp03wb473" > + "ntc,ncp15wl333" > +- "pullup-uv" Pull up voltage in micro volts > +- "pullup-ohm" Pull up resistor value in ohms > +- "pulldown-ohm" Pull down resistor value in ohms > +- "connected-positive" Always ON, If not specified. > + Status change is possible. > +- "io-channels" Channel node of ADC to be used for > + conversion. > + > +Read more about iio bindings at > + Documentation/devicetree/bindings/iio/iio-bindings.txt > + > +Example: > + ncp15wb473@0 { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 3>; > + }; > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 89ac1cb..cc47c12 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -879,6 +879,7 @@ config SENSORS_MCP3021 > > config SENSORS_NTC_THERMISTOR > tristate "NTC thermistor support" > + select IIO if OF > help > This driver supports NTC thermistors sensor reading and its > interpretation. The driver can also monitor the temperature and > diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c > index b5f63f9..a6997a1 100644 > --- a/drivers/hwmon/ntc_thermistor.c > +++ b/drivers/hwmon/ntc_thermistor.c > @@ -26,9 +26,16 @@ > #include > #include > #include > +#include > +#include > > #include > > +#include > +#include > +#include > +#include > + > #include > #include > > @@ -37,6 +44,15 @@ struct ntc_compensation { > unsigned int ohm; > }; > > +static const struct platform_device_id ntc_thermistor_id[] = { > + { "ncp15wb473", TYPE_NCPXXWB473 }, > + { "ncp18wb473", TYPE_NCPXXWB473 }, > + { "ncp21wb473", TYPE_NCPXXWB473 }, > + { "ncp03wb473", TYPE_NCPXXWB473 }, > + { "ncp15wl333", TYPE_NCPXXWL333 }, > + { }, > +}; > + > /* > * A compensation table should be sorted by the values of .ohm > * in descending order. > @@ -125,6 +141,92 @@ struct ntc_data { > char name[PLATFORM_NAME_SIZE]; > }; > > +#ifdef CONFIG_OF > +static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata) > +{ > + struct iio_channel *channel = pdata->chan; > + unsigned int result; > + int val, ret; > + > + ret = iio_read_channel_raw(channel, &val); > + if (ret < 0) { > + pr_err("read channel() error: %d\n", ret); > + return ret; > + } > + > + /* unit: mV */ > + result = pdata->pullup_uV * val; > + result >>= 12; > + > + return result; > +} > + > +static const struct of_device_id ntc_match[] = { > + { .compatible = "ntc,ncp15wb473", > + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, > + { .compatible = "ntc,ncp18wb473", > + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, > + { .compatible = "ntc,ncp21wb473", > + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, > + { .compatible = "ntc,ncp03wb473", > + .data = &ntc_thermistor_id[TYPE_NCPXXWB473] }, > + { .compatible = "ntc,ncp15wl333", > + .data = &ntc_thermistor_id[TYPE_NCPXXWL333] }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, ntc_match); > + > +static struct ntc_thermistor_platform_data * > +ntc_thermistor_parse_dt(struct platform_device *pdev) > +{ > + struct iio_channel *chan; > + struct device_node *np = pdev->dev.of_node; > + struct ntc_thermistor_platform_data *pdata; > + > + if (!np) > + return NULL; > + > + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return ERR_PTR(-ENOMEM); > + > + chan = iio_channel_get(&pdev->dev, NULL); > + if (IS_ERR(chan)) > + return ERR_PTR(PTR_ERR(chan)); > + > + if (of_property_read_u32(np, "pullup-uv", &pdata->pullup_uV)) > + return ERR_PTR(-ENODEV); > + if (of_property_read_u32(np, "pullup-ohm", &pdata->pullup_ohm)) > + return ERR_PTR(-ENODEV); > + if (of_property_read_u32(np, "pulldown-ohm", &pdata->pulldown_ohm)) > + return ERR_PTR(-ENODEV); > + > + if (of_find_property(np, "connected-positive", NULL)) > + pdata->connect = NTC_CONNECTED_POSITIVE; > + else /* status change should be possible if not always on. */ > + pdata->connect = NTC_CONNECTED_GROUND; > + > + pdata->chan = chan; > + pdata->read_uV = ntc_adc_iio_read; > + > + return pdata; > +} > +static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata) > +{ > + if (pdata->chan) > + iio_channel_release(pdata->chan); > +} > +#else > +static struct ntc_thermistor_platform_data * > +ntc_thermistor_parse_dt(struct platform_device *pdev) > +{ > + return NULL; > +} > + > +static void ntc_iio_channel_release(struct ntc_thermistor_platform_data *pdata) > +{ } > +#endif > + > static inline u64 div64_u64_safe(u64 dividend, u64 divisor) > { > if (divisor == 0 && dividend == 0) > @@ -259,7 +361,7 @@ static int ntc_thermistor_get_ohm(struct ntc_data *data) > return data->pdata->read_ohm(); > > if (data->pdata->read_uV) { > - read_uV = data->pdata->read_uV(); > + read_uV = data->pdata->read_uV(data->pdata); > if (read_uV < 0) > return read_uV; > return get_ohm_of_thermistor(data, read_uV); > @@ -311,9 +413,18 @@ static const struct attribute_group ntc_attr_group = { > > static int ntc_thermistor_probe(struct platform_device *pdev) > { > + const struct of_device_id *of_id = > + of_match_device(of_match_ptr(ntc_match), &pdev->dev); > + const struct platform_device_id *pdev_id; > + struct ntc_thermistor_platform_data *pdata; > struct ntc_data *data; > - struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data; > - int ret = 0; > + int ret; > + > + pdata = ntc_thermistor_parse_dt(pdev); > + if (IS_ERR(pdata)) > + return PTR_ERR(pdata); > + else if (pdata == NULL) > + pdata = pdev->dev.platform_data; > > if (!pdata) { > dev_err(&pdev->dev, "No platform init data supplied.\n"); > @@ -349,11 +460,13 @@ static int ntc_thermistor_probe(struct platform_device *pdev) > if (!data) > return -ENOMEM; > > + pdev_id = of_id ? of_id->data : platform_get_device_id(pdev); > + > data->dev = &pdev->dev; > data->pdata = pdata; > - strlcpy(data->name, pdev->id_entry->name, sizeof(data->name)); > + strlcpy(data->name, pdev_id->name, sizeof(data->name)); > > - switch (pdev->id_entry->driver_data) { > + switch (pdev_id->driver_data) { > case TYPE_NCPXXWB473: > data->comp = ncpXXwb473; > data->n_comp = ARRAY_SIZE(ncpXXwb473); > @@ -364,8 +477,7 @@ static int ntc_thermistor_probe(struct platform_device *pdev) > break; > default: > dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n", > - pdev->id_entry->driver_data, > - pdev->id_entry->name); > + pdev_id->driver_data, pdev_id->name); > return -EINVAL; > } > > @@ -384,39 +496,34 @@ static int ntc_thermistor_probe(struct platform_device *pdev) > goto err_after_sysfs; > } > > - dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n", > - pdev->name, pdev->id, pdev->id_entry->name, > - pdev->id_entry->driver_data); > + dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n", > + pdev->name); > + > return 0; > err_after_sysfs: > sysfs_remove_group(&data->dev->kobj, &ntc_attr_group); > + ntc_iio_channel_release(pdata); > return ret; > } > > static int ntc_thermistor_remove(struct platform_device *pdev) > { > struct ntc_data *data = platform_get_drvdata(pdev); > + struct ntc_thermistor_platform_data *pdata = data->pdata; > > hwmon_device_unregister(data->hwmon_dev); > sysfs_remove_group(&data->dev->kobj, &ntc_attr_group); > + ntc_iio_channel_release(pdata); > platform_set_drvdata(pdev, NULL); > > return 0; > } > > -static const struct platform_device_id ntc_thermistor_id[] = { > - { "ncp15wb473", TYPE_NCPXXWB473 }, > - { "ncp18wb473", TYPE_NCPXXWB473 }, > - { "ncp21wb473", TYPE_NCPXXWB473 }, > - { "ncp03wb473", TYPE_NCPXXWB473 }, > - { "ncp15wl333", TYPE_NCPXXWL333 }, > - { }, > -}; > - > static struct platform_driver ntc_thermistor_driver = { > .driver = { > .name = "ntc-thermistor", > .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(ntc_match), > }, > .probe = ntc_thermistor_probe, > .remove = ntc_thermistor_remove, > diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h > index 88734e8..fa95f9c 100644 > --- a/include/linux/platform_data/ntc_thermistor.h > +++ b/include/linux/platform_data/ntc_thermistor.h > @@ -21,6 +21,8 @@ > #ifndef _LINUX_NTC_H > #define _LINUX_NTC_H > > +struct iio_channel; > + > enum ntc_thermistor_type { > TYPE_NCPXXWB473, > TYPE_NCPXXWL333, > @@ -39,13 +41,17 @@ struct ntc_thermistor_platform_data { > * described at Documentation/hwmon/ntc_thermistor > * > * pullup/down_ohm: 0 for infinite / not-connected > + * > + * chan: iio_channel pointer to communicate with the ADC which the > + * thermistor is using for conversion of the analog values. > */ > - int (*read_uV)(void); > + int (*read_uV)(struct ntc_thermistor_platform_data *); > unsigned int pullup_uV; > > unsigned int pullup_ohm; > unsigned int pulldown_ohm; > enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; > + struct iio_channel *chan; > > int (*read_ohm)(void); > }; > -- > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/