Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756950Ab3CNLPi (ORCPT ); Thu, 14 Mar 2013 07:15:38 -0400 Received: from mercuryimc.plus.com ([80.229.200.144]:49349 "EHLO centos1.newflow.co.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756693Ab3CNLPe (ORCPT ); Thu, 14 Mar 2013 07:15:34 -0400 Message-ID: <5141B154.6050504@mimc.co.uk> Date: Thu, 14 Mar 2013 11:15:32 +0000 From: Mark Jackson User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130221 Thunderbird/17.0.3 MIME-Version: 1.0 To: dedekind1@gmail.com CC: "linux-mtd@lists.infradead.org" , "linux-omap@vger.kernel.org" , lkml , adrian.hunter@intel.com Subject: Re: MTD : Kernel oops when remounting ubifs as read/write References: <5134CEF9.5070502@mimc.co.uk> <1363087506.3348.62.camel@sauron.fi.intel.com> <51405F3A.3090901@mimc.co.uk> <1363252425.11441.94.camel@sauron.fi.intel.com> <51419E3A.8030007@mimc.co.uk> <1363257009.11441.97.camel@sauron.fi.intel.com> In-Reply-To: <1363257009.11441.97.camel@sauron.fi.intel.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18994 Lines: 347 On 14/03/13 10:30, Artem Bityutskiy wrote: > On Thu, 2013-03-14 at 09:54 +0000, Mark Jackson wrote: >> On 14/03/13 09:13, Artem Bityutskiy wrote: >>> On Wed, 2013-03-13 at 11:12 +0000, Mark Jackson wrote: >>>> Sorry ... this just locks up the unit. >>> >>> OK, I've reproduced the issue with 3.9-rc2 in nandsim, see the details >>> below. The patch I proposed did not get the error path correctly, but it >>> does fix the issue. >>> >>> I think what you treat as "lockup" is the fixup process. UBIFS basically >>> reads the entire UBI volume and writes it back. And it uses the atomic >>> change UBI service, which means it also calculates CRC of everything it >>> writes. And this all just takes a lot of time. This has to be done only >>> once on the first mount. >> >> Okay ... I've retried, but how long is "a lot of time" ? >> >> I've waited 15 minutes and still nothing. >> >> And I can see that there's no activity on the NAND chip select !?! >> >> I'll put some debug info into the fixup routines to see if I can trace what's going on. > > Just to make sure - try this last patch I sent. I did test it with > nandsim at least, and I am sure it works. I did not test at all the > first one. > > And yes, debug messages would be useful, just do not forget to add the > 'ignore_loglevel' kernel boot option, otherwise you won't see the > messages on your console, since they are of KERN_DEBUG level. > > You may have other issues which cause lockup, e.g., in driver level. It > makes sense to validate your flash with MTD test modules. My first initial findings ... I added some simple printk(KERN_INFO) lines to fixup_free_space(), and when I remount, it gets as far as:- printk(KERN_INFO "ffs 7\n"); /* Fixup LEBs in the main area */ for (lnum = c->main_first; lnum < c->leb_cnt; lnum++) { lprops = ubifs_lpt_lookup(c, lnum); if (IS_ERR(lprops)) { err = PTR_ERR(lprops); goto out; } if (lprops->free > 0) { err = fixup_leb(c, lnum, c->leb_size - lprops->free); if (err) goto out; } } out: printk(KERN_INFO "ffs x\n"); ubifs_release_lprops(c); return err; } ... before we get an oops with crc32_le(). See the full log below. I'll keep digging ... Regards Mark J. --- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.8.0-next-20130225-00002-g678576f-dirty (mpfj@mpfj-nanobone) (gcc version 4.5.4 (Buildroot 2012.11) ) #40 Thu Mar 14 10:58:28 GMT 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 65280 [ 0.000000] free_area_init_node: node 0, pgdat c059c7b0, node_mem_map c0ac6000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO0,115200n8 noinitrd ip=off mem=256M rootwait=1 ubi.mtd=6,2048 rootfstype=ubifs root=ubi0:rootfs ignore_loglevel [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 255MB = 255MB total [ 0.000000] Memory: 247768k/247768k available, 14376k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc05194ac (5190 kB) [ 0.000000] .init : 0xc051a000 - 0xc054bfbc ( 200 kB) [ 0.000000] .data : 0xc054c000 - 0xc059d360 ( 325 kB) [ 0.000000] .bss : 0xc059d360 - 0xc0ac21a0 (5268 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 26000000 Hz [ 0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms [ 0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000866] Calibrating delay loop... 476.77 BogoMIPS (lpj=2383872) [ 0.119747] pid_max: default: 32768 minimum: 301 [ 0.120031] Security Framework initialized [ 0.120132] Mount-cache hash table entries: 512 [ 0.130113] CPU: Testing write buffer coherency: ok [ 0.131391] Setting up static identity map for 0xc0402cf8 - 0xc0402d50 [ 0.134796] devtmpfs: initialized [ 0.196435] pinctrl core: initialized pinctrl subsystem [ 0.201669] regulator-dummy: no parameters [ 0.203862] NET: Registered protocol family 16 [ 0.204608] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.222839] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.223232] OMAP GPIO hardware version 0.1 [ 0.225994] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.228624] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.231214] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.245983] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/gpmc_pins, deferring probe [ 0.246035] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral [ 0.246674] No ATAGs? [ 0.246691] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.284604] bio: create slab at 0 [ 0.350695] omap-dma-engine omap-dma-engine: OMAP DMA engine driver [ 0.357130] usbcore: registered new interface driver usbfs [ 0.357526] usbcore: registered new interface driver hub [ 0.358167] usbcore: registered new device driver usb [ 0.359106] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/i2c1_pins, deferring probe [ 0.359152] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.366391] cfg80211: Calling CRDA to update world regulatory domain [ 0.368068] Switching to clocksource gp_timer [ 0.416727] NET: Registered protocol family 2 [ 0.418471] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.418683] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 0.419630] TCP: Hash tables configured (established 2048 bind 2048) [ 0.419844] TCP: reno registered [ 0.419874] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.420133] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.420922] NET: Registered protocol family 1 [ 0.422131] RPC: Registered named UNIX socket transport module. [ 0.422155] RPC: Registered udp transport module. [ 0.422165] RPC: Registered tcp transport module. [ 0.422175] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.423061] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.423514] CPU PMU: probing PMU on CPU 0 [ 0.423544] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.435819] msgmni has been set to 483 [ 0.440155] io scheduler noop registered [ 0.440181] io scheduler deadline registered [ 0.440250] io scheduler cfq registered (default) [ 0.441286] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.442944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.450243] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.062979] console [ttyO0] enabled [ 1.069318] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1 [ 1.078922] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2 [ 1.088374] 481a6000.serial: ttyO3 at MMIO 0x481a6000 (irq = 60) is a OMAP UART3 [ 1.097747] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4 [ 1.107140] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5 [ 1.141639] brd: module loaded [ 1.160604] loop: module loaded [ 1.167555] Generic platform RAM MTD, (c) 2004 Simtec Electronics [ 1.179155] usbcore: registered new interface driver rt2800usb [ 1.185699] usbcore: registered new interface driver asix [ 1.191823] usbcore: registered new interface driver cdc_ether [ 1.198389] usbcore: registered new interface driver smsc95xx [ 1.204825] usbcore: registered new interface driver net1080 [ 1.211201] usbcore: registered new interface driver cdc_subset [ 1.217812] usbcore: registered new interface driver zaurus [ 1.224164] usbcore: registered new interface driver cdc_ncm [ 1.232048] usbcore: registered new interface driver cdc_wdm [ 1.238521] usbcore: registered new interface driver usbtest [ 1.244879] i2c /dev entries driver [ 1.252025] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.260616] omap_cpufreq_init: unable to get MPU regulator [ 1.269707] usbcore: registered new interface driver usbhid [ 1.275600] usbhid: USB HID core driver [ 1.280825] oprofile: using arm/armv7 [ 1.285411] TCP: cubic registered [ 1.288994] Initializing XFRM netlink socket [ 1.293630] NET: Registered protocol family 17 [ 1.298456] NET: Registered protocol family 15 [ 1.303575] Key type dns_resolver registered [ 1.308250] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 1.316401] ThumbEE CPU extension supported. [ 1.324959] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.332583] enabling NAND BCH ecc with 8-bit correction [ 1.338520] ONFI param page 0 valid [ 1.342206] ONFI flash detected [ 1.345527] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64 [ 1.357810] 8 ofpart partitions found on MTD device omap2-nand.0 [ 1.364195] Creating 8 MTD partitions on "omap2-nand.0": [ 1.369857] 0x000000000000-0x000000020000 : "spl1" [ 1.377262] 0x000000020000-0x000000040000 : "spl2" [ 1.383363] 0x000000040000-0x000000060000 : "spl3" [ 1.389263] 0x000000060000-0x000000080000 : "spl4" [ 1.395107] 0x000000080000-0x0000001e0000 : "boot" [ 1.402034] 0x0000001e0000-0x000000200000 : "env" [ 1.407758] 0x000000200000-0x000004200000 : "rootfs" [ 1.468624] 0x000004200000-0x000010000000 : "data" [ 1.641028] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.647706] mcp230xx 0-0020: invalid or missing platform data [ 1.653901] mcp230xx: probe of 0-0020 failed with error -22 [ 1.664675] DCDC1: at 1800 mV [ 1.670057] vdd_mpu: 925 <--> 1325 mV at 3300 mV [ 1.677053] vdd_core: 925 <--> 1150 mV at 1100 mV [ 1.684039] LDO1: at 1800 mV [ 1.689131] LDO2: at 3300 mV [ 1.694112] LDO3: at 1800 mV [ 1.699383] LDO4: at 2800 mV [ 1.704094] tps65217 0-0024: TPS65217 ID 0x7 version 1.1 [ 1.710665] at24 0-0053: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.721368] rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0 [ 1.727934] rtc-ds1307 0-0068: 56 bytes nvram [ 1.734589] UBI: attaching mtd6 to ubi0 [ 1.944782] UBI: scanning is finished [ 1.958753] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 4, need 40 [ 1.982129] UBI: volume 0 ("rootfs") re-sized from 504 to 504 LEBs [ 1.991995] UBI: attached mtd6 (name "rootfs", size 64 MiB) to ubi0 [ 1.998710] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.005875] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 2.012935] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.020220] UBI: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0 [ 2.026469] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.034028] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 104567561 [ 2.043506] UBI: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 4 [ 2.054154] UBI: background thread "ubi_bgt0d" started, PID 591 [ 2.148196] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.154650] davinci_mdio 4a101000.mdio: detected phy mask fffffffc [ 2.179932] libphy: 4a101000.mdio: probed [ 2.184195] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.193904] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver SMSC LAN8710/LAN8720 [ 2.203969] Random MACID = 36:f9:8d:06:57:7f [ 2.240893] rtc-ds1307 0-0068: setting system clock to 2013-03-14 11:07:34 UTC (1363259254) [ 2.419408] UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode [ 2.426699] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.436415] UBIFS: FS size: 62599168 bytes (59 MiB, 493 LEBs), journal size 8253440 bytes (7 MiB, 65 LEBs) [ 2.446637] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.452006] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7A53349A-BCDB-4026-B45F-CCE435589ADA, small LPT model [ 2.520859] VFS: Mounted root (ubifs filesystem) readonly on device 0:12. [ 2.530533] devtmpfs: mounted [ 2.534117] Freeing init memory: 196K Starting logging: OK Initializing random number generator... read-only file system detected...done Starting network... [ 3.060289] net eth0: initializing cpsw version 1.12 (0) [ 3.068476] net eth0: phy found : id is : 0x7c0f1 [ 3.074025] net eth0: phy found : id is : 0x7c0f1 udhcpc (v1.20.2) started Sending discover... Sending discover... [ 6.149073] libphy: 4a101000.mdio:00 - Link is Up - 100/Full Sending discover... Sending select for 10.0.0.127... Lease of 10.0.0.127 obtained, lease time 259200 deleting routers route: SIOCDELRT: No such process adding dns 4.2.2.5 adding dns 208.67.220.220 ip: SIOCGIFFLAGS: No such device Starting dropbear sshd: mkdir: can't create directory '/etc/dropbear': Read-only file system generating rsa key... generating dsa key... OK Starting lighttpd: OK Welcome to Buildroot nanobone login: root Password: # mount rootfs on / type rootfs (rw) ubi0:rootfs on / type ubifs (ro,relatime) devtmpfs on /dev type devtmpfs (rw,relatime,size=123884k,nr_inodes=30971,mode=755) proc on /proc type proc (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777) tmpfs on /tmp type tmpfs (rw,relatime) sysfs on /sys type sysfs (rw,relatime) # mount -o remount,rw / [ 28.482971] UBIFS: start fixing up free space [ 28.487601] uffs 1 [ 28.489849] ffs 1 [ 28.491901] ffs 2 [ 28.498617] ffs 3 [ 28.500932] ffs 4 [ 28.504148] ffs 5 [ 28.507352] ffs 6 [ 28.509468] ffs 7 [ 28.527936] Unable to handle kernel paging request at virtual address d08ea004 [ 28.535639] pgd = cf3b8000 [ 28.538525] [d08ea004] *pgd=8f045811, *pte=00000000, *ppte=00000000 [ 28.545173] Internal error: Oops: 7 [#1] ARM [ 28.549685] CPU: 0 Not tainted (3.8.0-next-20130225-00002-g678576f-dirty #40) [ 28.557595] PC is at crc32_le+0x50/0x168 [ 28.561735] LR is at ubi_eba_atomic_leb_change+0x1b4/0x410 [ 28.567523] pc : [] lr : [] psr: 20000013 [ 28.567523] sp : cf385de0 ip : 180a985a fp : c054f840 [ 28.579632] r10: c054f040 r9 : c054fc40 r8 : 158a1232 [ 28.585141] r7 : 4d506705 r6 : 9324fd72 r5 : 4dc8a10b r4 : 4c162691 [ 28.592025] r3 : c054e040 r2 : c054f440 r1 : d08ea000 r0 : 4c8ee09f [ 28.598912] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 28.606439] Control: 10c5387d Table: 8f3b8019 DAC: 00000015 [ 28.612501] Process mount (pid: 659, stack limit = 0xcf384238) [ 28.618652] Stack: (0xcf385de0 to 0xcf386000) [ 28.623254] 5de0: cf2f8554 00000000 d08e6e8c 180a9e88 5a257c4f 58399ee9 c8d98a08 bb0ee864 [ 28.631886] 5e00: eae10678 c054fc40 c054f040 c054f840 cf2f8000 00000000 d08caffc 00003c00 [ 28.640517] 5e20: cf2f8000 cf357c00 00000000 0000000c cf2ec000 00000000 0000000c cf2f8554 [ 28.649148] 5e40: d08cb000 0001e000 00000000 d08cb000 00008000 00000000 00000000 0001e000 [ 28.657779] 5e60: 00000000 0000000c d08cb000 00000080 0000000c 0000000c 00000000 00000020 [ 28.666409] 5e80: 00008000 c026c41c 0001e000 cf330000 cf330000 d08cb000 0001e000 c0179b14 [ 28.675042] 5ea0: 0000000d c0177a68 0001e000 cf330000 00000000 cf330b20 0000000d c0179698 [ 28.683672] 5ec0: cf330000 00000000 cf330a9c 00000000 cf385f48 c0175170 00000001 60000013 [ 28.692303] 5ee0: cf32c800 00000000 00000000 00000000 cf385f48 00000000 00000020 c00c9e24 [ 28.700934] 5f00: 00100100 00200200 cf3a6c80 00008000 cf384000 00208020 00000000 cf01a200 [ 28.709564] 5f20: cf32c800 c00e3d6c 00000000 0000000c cf32c840 00000000 c0013968 cf31fb80 [ 28.718195] 5f40: 0000000c 00000000 cf01a210 ce828858 0000000c cf3ac000 000a18b4 00000000 [ 28.726827] 5f60: 00208020 c0013968 cf384000 00000000 00000003 c00e3e40 00000000 c0071e24 [ 28.735459] 5f80: 00000000 00000000 cf31fb80 cf31fbc0 a0000010 00000000 bed87b68 b6ff148c [ 28.744091] 5fa0: 00000015 c00137c0 00000000 bed87b68 000a18b4 000a18c0 000a18c2 00208020 [ 28.752720] 5fc0: 00000000 bed87b68 b6ff148c 00000015 00000000 00000000 00000000 00000003 [ 28.761350] 5fe0: b6fa3f48 bed87a64 00042994 b6fa3f58 a0000010 000a18b4 00000000 00000000 [ 28.769989] [] (crc32_le+0x50/0x168) from [] (0xcf2f8000) [ 28.777522] Code: e58d8008 0a000026 e1a0c005 e58d2004 (e5916004) [ 28.784029] ---[ end trace f50f53afffe647f1 ]--- Segmentation fault -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/