Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751723Ab3CNSUg (ORCPT ); Thu, 14 Mar 2013 14:20:36 -0400 Received: from zmc.proxad.net ([212.27.53.206]:39946 "EHLO zmc.proxad.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933520Ab3CNSUU (ORCPT ); Thu, 14 Mar 2013 14:20:20 -0400 From: Florian Fainelli To: davem@davemloft.net Cc: Grant Likely , Rob Herring , Rob Landley , Jason Cooper , Andrew Lunn , Russell King , Benjamin Herrenschmidt , Paul Mackerras , Lennert Buytenhek , Florian Fainelli , Thomas Petazzoni , Greg Kroah-Hartman , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org, netdev@vger.kernel.org Subject: [PATCH 3/4 v2] net: mvmdio: enhance driver to support SMI error/done interrupts Date: Thu, 14 Mar 2013 19:08:34 +0100 Message-Id: <1363284515-9865-4-git-send-email-florian@openwrt.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1363284515-9865-1-git-send-email-florian@openwrt.org> References: <1359473048-26551-1-git-send-email-florian@openwrt.org> <1363284515-9865-1-git-send-email-florian@openwrt.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5335 Lines: 177 This patch enhances the "mvmdio" to support a SMI error/done interrupt line which can be used along with a wait queue instead of doing busy-waiting on the registers. This is a feature which is available in the mv643xx_eth SMI code and thus reduces again the gap between the two. Signed-off-by: Florian Fainelli --- Chances since v1: - always use orion_smi_is_done() helper - make interrupt/non-interrupt code path entirely independant .../devicetree/bindings/net/marvell-orion-mdio.txt | 3 + drivers/net/ethernet/marvell/mvmdio.c | 83 +++++++++++++++++--- 2 files changed, 74 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt index 34e7aaf..052b5f2 100644 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt @@ -9,6 +9,9 @@ Required properties: - compatible: "marvell,orion-mdio" - reg: address and length of the SMI register +Optional properties: +- interrupts: interrupt line number for the SMI error/done interrupt + The child nodes of the MDIO driver are the individual PHY devices connected to this MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus. diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index 595deea..7ac83de 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -24,9 +24,12 @@ #include #include #include +#include #include #include #include +#include +#include #define MVMDIO_SMI_DATA_SHIFT 0 #define MVMDIO_SMI_PHY_ADDR_SHIFT 16 @@ -35,33 +38,58 @@ #define MVMDIO_SMI_WRITE_OPERATION 0 #define MVMDIO_SMI_READ_VALID BIT(27) #define MVMDIO_SMI_BUSY BIT(28) +#define MVMDIO_ERR_INT_CAUSE 0x007C +#define MVMDIO_ERR_INT_SMI_DONE 0x00000010 +#define MVMDIO_ERR_INT_MASK 0x0080 struct orion_mdio_dev { struct mutex lock; void __iomem *regs; + /* + * If we have access to the error interrupt pin (which is + * somewhat misnamed as it not only reflects internal errors + * but also reflects SMI completion), use that to wait for + * SMI access completion instead of polling the SMI busy bit. + */ + int err_interrupt; + wait_queue_head_t smi_busy_wait; }; +static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev) +{ + return !(readl(dev->regs) & MVMDIO_SMI_BUSY); +} + /* Wait for the SMI unit to be ready for another operation */ static int orion_mdio_wait_ready(struct mii_bus *bus) { struct orion_mdio_dev *dev = bus->priv; int count; - u32 val; - count = 0; - while (1) { - val = readl(dev->regs); - if (!(val & MVMDIO_SMI_BUSY)) - break; + if (dev->err_interrupt == NO_IRQ) { + count = 0; + while (1) { + if (orion_mdio_smi_is_done(dev)) + break; - if (count > 100) { - dev_err(bus->parent, "Timeout: SMI busy for too long\n"); - return -ETIMEDOUT; - } + if (count > 100) { + dev_err(bus->parent, + "Timeout: SMI busy for too long\n"); + return -ETIMEDOUT; + } - udelay(10); - count++; + udelay(10); + count++; + } + } else { + if (!orion_mdio_smi_is_done(dev)) { + wait_event_timeout(dev->smi_busy_wait, + orion_mdio_smi_is_done(dev), + msecs_to_jiffies(100)); + if (!orion_mdio_smi_is_done(dev)) + return -ETIMEDOUT; + } } return 0; @@ -140,6 +168,21 @@ static int orion_mdio_reset(struct mii_bus *bus) return 0; } +static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id) +{ + struct orion_mdio_dev *dev = dev_id; + + if (readl(dev->regs + MVMDIO_ERR_INT_CAUSE) & + MVMDIO_ERR_INT_SMI_DONE) { + writel(~MVMDIO_ERR_INT_SMI_DONE, + dev->regs + MVMDIO_ERR_INT_CAUSE); + wake_up(&dev->smi_busy_wait); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + static int orion_mdio_probe(struct platform_device *pdev) { struct resource *r; @@ -185,6 +228,19 @@ static int orion_mdio_probe(struct platform_device *pdev) return -ENODEV; } + init_waitqueue_head(&dev->smi_busy_wait); + + dev->err_interrupt = platform_get_irq(pdev, 0); + if (dev->err_interrupt != -ENXIO) { + ret = devm_request_irq(&pdev->dev, dev->err_interrupt, + orion_mdio_err_irq, + IRQF_SHARED, pdev->name, dev); + if (!ret) + writel(MVMDIO_ERR_INT_SMI_DONE, + dev->regs + MVMDIO_ERR_INT_MASK); + } else + dev->err_interrupt = NO_IRQ; + mutex_init(&dev->lock); ret = mdiobus_register(bus); @@ -203,6 +259,9 @@ static int orion_mdio_probe(struct platform_device *pdev) static int orion_mdio_remove(struct platform_device *pdev) { struct mii_bus *bus = platform_get_drvdata(pdev); + struct orion_mdio_dev *dev = bus->priv; + + writel(0, dev->regs + MVMDIO_ERR_INT_MASK); mdiobus_unregister(bus); kfree(bus->irq); mdiobus_free(bus); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/