Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932091Ab3CPKZu (ORCPT ); Sat, 16 Mar 2013 06:25:50 -0400 Received: from mail-pb0-f43.google.com ([209.85.160.43]:36855 "EHLO mail-pb0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755488Ab3CPKZs (ORCPT ); Sat, 16 Mar 2013 06:25:48 -0400 From: Prabhakar lad To: LAK , DLOS , Sekhar Nori Cc: LKML , "Lad, Prabhakar" Subject: [PATCH v5 2/2] ARM: davinci: dm355 EVM: add support for VPBE display Date: Sat, 16 Mar 2013 15:47:32 +0530 Message-Id: <1363429052-1081-3-git-send-email-prabhakar.csengg@gmail.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1363429052-1081-1-git-send-email-prabhakar.csengg@gmail.com> References: <1363429052-1081-1-git-send-email-prabhakar.csengg@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3160 Lines: 106 From: Lad, Prabhakar add support for V4L2 video display to DM355 EVM. Support for SD modes is provided, along with Composite output Signed-off-by: Lad, Prabhakar --- arch/arm/mach-davinci/board-dm355-evm.c | 69 ++++++++++++++++++++++++++++++- 1 files changed, 68 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 37d12cc..1043506 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -242,6 +242,73 @@ static struct vpfe_config vpfe_cfg = { .ccdc = "DM355 CCDC", }; +/* venc standards timings */ +static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = { + { + .name = "ntsc", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_525_60, + .interlaced = 1, + .xres = 720, + .yres = 480, + .aspect = {11, 10}, + .fps = {30000, 1001}, + .left_margin = 0x79, + .upper_margin = 0x10, + }, + { + .name = "pal", + .timings_type = VPBE_ENC_STD, + .std_id = V4L2_STD_625_50, + .interlaced = 1, + .xres = 720, + .yres = 576, + .aspect = {54, 59}, + .fps = {25, 1}, + .left_margin = 0x7E, + .upper_margin = 0x16 + }, +}; + +#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +/* + * The outputs available from VPBE + ecnoders. Keep the + * the order same as that of encoders. First those from venc followed by that + * from encoders. Index in the output refers to index on a particular encoder. + * Driver uses this index to pass it to encoder when it supports more than + * one output. Application uses index of the array to set an output. + */ +static struct vpbe_output dm355evm_vpbe_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .std = VENC_STD_ALL, + .capabilities = V4L2_OUT_CAP_STD, + }, + .subdev_name = DM355_VPBE_VENC_SUBDEV_NAME, + .default_mode = "ntsc", + .num_modes = ARRAY_SIZE(dm355evm_enc_preset_timing), + .modes = dm355evm_enc_preset_timing, + .if_params = V4L2_MBUS_FMT_FIXED, + }, +}; + +static struct vpbe_config dm355evm_display_cfg = { + .module_name = "dm355-vpbe-display", + .i2c_adapter_id = 1, + .osd = { + .module_name = DM355_VPBE_OSD_SUBDEV_NAME, + }, + .venc = { + .module_name = DM355_VPBE_VENC_SUBDEV_NAME, + }, + .num_outputs = ARRAY_SIZE(dm355evm_vpbe_outputs), + .outputs = dm355evm_vpbe_outputs, +}; + static struct platform_device *davinci_evm_devices[] __initdata = { &dm355evm_dm9000, &davinci_nand_device, @@ -342,7 +409,7 @@ static __init void dm355_evm_init(void) davinci_setup_mmc(0, &dm355evm_mmc_config); davinci_setup_mmc(1, &dm355evm_mmc_config); - dm355_init_video(&vpfe_cfg, NULL); + dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg); dm355_init_spi0(BIT(0), dm355_evm_spi_info, ARRAY_SIZE(dm355_evm_spi_info)); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/