Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932464Ab3CPNLS (ORCPT ); Sat, 16 Mar 2013 09:11:18 -0400 Received: from mail-bk0-f47.google.com ([209.85.214.47]:59999 "EHLO mail-bk0-f47.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932125Ab3CPNLO (ORCPT ); Sat, 16 Mar 2013 09:11:14 -0400 From: Sebastian Hesselbarth To: Sebastian Hesselbarth Cc: Grant Likely , Rob Herring , Rob Landley , Mike Turquette , Stephen Warren , Thierry Reding , Dom Cobley , Linus Walleij , Arnd Bergmann , Andrew Morton , Russell King - ARM Linux , Rabeeh Khoury , Daniel Mack , Jean-Francois Moine , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2] clk: add si5351 i2c common clock driver Date: Sat, 16 Mar 2013 14:10:47 +0100 Message-Id: <1363439447-21336-1-git-send-email-sebastian.hesselbarth@gmail.com> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1360414772-12232-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1360414772-12232-1-git-send-email-sebastian.hesselbarth@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 52301 Lines: 1798 This patch adds a common clock driver for Silicon Labs Si5351a/b/c i2c programmable clock generators. Currently, the driver supports DT kernels only and VXCO feature of si5351b is not implemented. DT bindings selectively allow to overwrite stored Si5351 configuration which is very helpful for clock generators with empty eeprom configuration. Corresponding device tree binding documentation is also added. Signed-off-by: Sebastian Hesselbarth --- Changes from v1: - remove .is_enabled functions as they read from i2c (Reported by Daniel Mack) - add CLK_SET_RATE_PARENT on clkout reparent if clkout uses its own multisync Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: Mike Turquette Cc: Stephen Warren Cc: Thierry Reding Cc: Dom Cobley Cc: Linus Walleij Cc: Arnd Bergmann Cc: Andrew Morton Cc: Russell King - ARM Linux Cc: Rabeeh Khoury Cc: Daniel Mack Cc: Jean-Francois Moine Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org --- .../devicetree/bindings/clock/silabs,si5351.txt | 114 ++ .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-si5351.c | 1413 ++++++++++++++++++++ drivers/clk/clk-si5351.h | 155 +++ 6 files changed, 1693 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.txt create mode 100644 drivers/clk/clk-si5351.c create mode 100644 drivers/clk/clk-si5351.h diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt new file mode 100644 index 0000000..f73d2d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -0,0 +1,114 @@ +Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator. + +Reference +[1] Si5351A/B/C Data Sheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf + +The Si5351a/b/c are programmable i2c clock generators with upto 8 output +clocks. Si5351a also has a reduced pin-count package (MSOP10) where only +3 output clocks are accessible. The internal structure of the clock +generators can be found in [1]. + +==I2C device node== + +Required properties: +- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}". +- reg: i2c device address, shall be 0x60 or 0x61. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock + handles, shall be xtal reference clock or xtal and clkin for + si5351c only. +- #address-cells: shall be set to 1. +- #size-cells: shall be set to 0. + +Optional properties: +- pll-source: pair of (number, source) for each pll. Allows + to overwrite clock source of pll A (number=0) or B (number=1). + +==Child nodes== + +Each of the clock outputs can be overwritten individually by +using a child node to the I2C device node. If a child node for a clock +output is not set, the eeprom configuration is not overwritten. + +Required child node properties: +- reg: number of clock output. + +Optional child node properties: +- clock-source: source clock of the output divider stage N, shall be + 0 = multisynth N + 1 = multisynth 0 for output clocks 0-3, else multisynth4 + 2 = xtal + 3 = clkin (si5351c only) +- drive-strength: output drive strength in mA, shall be one of {2,4,6,8}. +- multisynth-source: source pll A(0) or B(1) of corresponding multisynth + divider. +- pll-master: boolean, multisynth can change pll frequency. + +==Example== + +/* 25MHz reference crystal */ +ref25: ref25M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; +}; + +i2c-master-node { + + /* Si5351a msop10 i2c clock generator */ + si5351a: clock-generator@60 { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* connect xtal input to 25MHz reference */ + clocks = <&ref25>; + + /* connect xtal input as source of pll0 and pll1 */ + pll-source = <0 0>, <1 0>; + + /* + * overwrite clkout0 configuration with: + * - 8mA output drive strength + * - pll0 as clock source of multisynth0 + * - multisynth0 as clock source of output divider + * - multisynth0 can change pll0 + * - set initial clock frequency of 74.25MHz + */ + clkout0 { + reg = <0>; + drive-strength = <8>; + multisynth-source = <0>; + clock-source = <0>; + pll-master; + clock-frequency = <74250000>; + }; + + /* + * overwrite clkout1 configuration with: + * - 4mA output drive strength + * - pll1 as clock source of multisynth1 + * - multisynth1 as clock source of output divider + * - multisynth1 can change pll1 + */ + clkout1 { + reg = <1>; + drive-strength = <4>; + multisynth-source = <1>; + clock-source = <0>; + pll-master; + }; + + /* + * overwrite clkout2 configuration with: + * - xtal as clock source of output divider + */ + clkout2 { + reg = <2>; + clock-source = <2>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 19e1ef7..ca60849 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -48,6 +48,7 @@ samsung Samsung Semiconductor sbs Smart Battery System schindler Schindler sil Silicon Image +silabs Silicon Laboratories simtek sirf SiRF Technology, Inc. snps Synopsys, Inc. diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index e23e471..aba4f59 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -61,6 +61,15 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_SI5351 + tristate "Clock driver for SiLabs 5351A/B/C" + depends on I2C + select REGMAP_I2C + select RATIONAL + ---help--- + This driver supports Silicon Labs 5351A/B/C programmable clock + generators. + config CLK_TWL6040 tristate "External McPDM functional clock from twl6040" depends on TWL6040_CORE diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 095899e..8f58889 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_X86) += x86/ # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o # Debug drivers diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c new file mode 100644 index 0000000..1844ae2 --- /dev/null +++ b/drivers/clk/clk-si5351.c @@ -0,0 +1,1413 @@ +/* + * clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator + * + * Sebastian Hesselbarth + * Rabeeh Khoury + * + * References: + * [1] "Si5351A/B/C Data Sheet" + * http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf + * [2] "Manually Generating an Si5351 Register Map" + * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clk-si5351.h" + +enum si5351_variant { + SI5351_VARIANT_A = 1, + SI5351_VARIANT_A3 = 2, + SI5351_VARIANT_B = 3, + SI5351_VARIANT_C = 4, +}; + +struct si5351_driver_data; + +struct si5351_parameters { + unsigned long p1; + unsigned long p2; + unsigned long p3; + int valid; +}; + +struct si5351_hw_data { + struct clk_hw hw; + struct si5351_driver_data *drvdata; + struct si5351_parameters params; + unsigned char num; +}; + +struct si5351_driver_data { + enum si5351_variant variant; + struct i2c_client *client; + struct regmap *regmap; + struct clk_onecell_data onecell; + + struct clk *pxtal; + struct clk_hw xtal; + struct clk *pclkin; + struct clk_hw clkin; + + struct si5351_hw_data pll[2]; + struct si5351_hw_data *msynth; + struct si5351_hw_data *clkout; +}; + +static const char const *si5351_input_names[] = { + "xtal", "clkin" +}; +static const char const *si5351_pll_names[] = { + "plla", "pllb", "vxco" +}; +static const char const *si5351_msynth_names[] = { + "ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7" +}; +static const char const *si5351_clkout_names[] = { + "clk0", "clk1", "clk2", "clk3", "clk4", "clk5", "clk6", "clk7" +}; + +/* + * Si5351 i2c regmap + */ +static inline unsigned char si5351_reg_read(struct si5351_driver_data *drvdata, + unsigned char reg) +{ + unsigned int val; + int ret; + + ret = regmap_read(drvdata->regmap, reg, &val); + if (ret) { + dev_err(&drvdata->client->dev, + "unable to read from reg%02x\n", reg); + return 0; + } + + return (unsigned char)val; +} + +static inline int si5351_bulk_read(struct si5351_driver_data *drvdata, + unsigned char reg, unsigned char count, unsigned char *buf) +{ + return regmap_bulk_read(drvdata->regmap, reg, buf, count); +} + +static inline int si5351_reg_write(struct si5351_driver_data *drvdata, + unsigned char reg, unsigned char val) +{ + return regmap_write(drvdata->regmap, reg, val); +} + +static inline int si5351_bulk_write(struct si5351_driver_data *drvdata, + unsigned char reg, unsigned char count, const unsigned char *buf) +{ + return regmap_raw_write(drvdata->regmap, reg, buf, count); +} + +static inline int si5351_set_bits(struct si5351_driver_data *drvdata, + unsigned char reg, unsigned char mask, unsigned char val) +{ + return regmap_update_bits(drvdata->regmap, reg, mask, val); +} + +static void si5351_read_parameters(struct si5351_driver_data *drvdata, + unsigned char reg, struct si5351_parameters *params) +{ + unsigned char buf[SI5351_PARAMETERS_LENGTH]; + + switch (reg) { + case SI5351_CLK6_PARAMETERS: + case SI5351_CLK7_PARAMETERS: + buf[0] = si5351_reg_read(drvdata, reg); + params->p1 = buf[0]; + params->p2 = 0; + params->p3 = 1; + break; + default: + si5351_bulk_read(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf); + params->p1 = ((buf[2] & 0x03) << 16) | (buf[3] << 8) | buf[4]; + params->p2 = ((buf[5] & 0x0f) << 16) | (buf[6] << 8) | buf[7]; + params->p3 = ((buf[5] & 0xf0) << 12) | (buf[0] << 8) | buf[1]; + } + params->valid = 1; +} + +static void si5351_write_parameters(struct si5351_driver_data *drvdata, + unsigned char reg, struct si5351_parameters *params) +{ + unsigned char buf[SI5351_PARAMETERS_LENGTH]; + + switch (reg) { + case SI5351_CLK6_PARAMETERS: + case SI5351_CLK7_PARAMETERS: + buf[0] = params->p1 & 0xff; + si5351_reg_write(drvdata, reg, buf[0]); + break; + default: + buf[0] = ((params->p3 & 0x0ff00) >> 8) & 0xff; + buf[1] = params->p3 & 0xff; + /* save rdiv and divby4 */ + buf[2] = si5351_reg_read(drvdata, reg + 2) & ~0x03; + buf[2] |= ((params->p1 & 0x30000) >> 16) & 0x03; + buf[3] = ((params->p1 & 0x0ff00) >> 8) & 0xff; + buf[4] = params->p1 & 0xff; + buf[5] = ((params->p3 & 0xf0000) >> 12) | + ((params->p2 & 0xf0000) >> 16); + buf[6] = ((params->p2 & 0x0ff00) >> 8) & 0xff; + buf[7] = params->p2 & 0xff; + si5351_bulk_write(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf); + } +} + +static bool si5351_regmap_is_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SI5351_DEVICE_STATUS: + case SI5351_INTERRUPT_STATUS: + case SI5351_PLL_RESET: + return true; + } + return false; +} + +static bool si5351_regmap_is_writeable(struct device *dev, unsigned int reg) +{ + /* reserved registers */ + if (reg >= 4 && reg <= 8) + return false; + if (reg >= 10 && reg <= 14) + return false; + if (reg >= 173 && reg <= 176) + return false; + if (reg >= 178 && reg <= 182) + return false; + /* read-only */ + if (reg == SI5351_DEVICE_STATUS) + return false; + return true; +} + +static struct regmap_config si5351_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = 187, + .writeable_reg = si5351_regmap_is_writeable, + .volatile_reg = si5351_regmap_is_volatile, +}; + +/* + * Si5351 xtal clock input + */ +static int si5351_xtal_prepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, xtal); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_XTAL_ENABLE, SI5351_XTAL_ENABLE); + return 0; +} + +static void si5351_xtal_unprepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, xtal); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_XTAL_ENABLE, 0); +} + +static const struct clk_ops si5351_xtal_ops = { + .prepare = si5351_xtal_prepare, + .unprepare = si5351_xtal_unprepare, +}; + +/* + * Si5351 clkin clock input (Si5351C only) + */ +static int si5351_clkin_prepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, clkin); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_CLKIN_ENABLE, SI5351_CLKIN_ENABLE); + return 0; +} + +static void si5351_clkin_unprepare(struct clk_hw *hw) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, clkin); + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, + SI5351_CLKIN_ENABLE, 0); +} + +/* + * CMOS clock source constraints: + * The input frequency range of the PLL is 10Mhz to 40MHz. + * If CLKIN is >40MHz, the input divider must be used. + */ +static unsigned long si5351_clkin_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_driver_data *drvdata = + container_of(hw, struct si5351_driver_data, clkin); + unsigned long rate; + unsigned char idiv; + + rate = parent_rate; + if (parent_rate > 160000000) { + idiv = SI5351_CLKIN_DIV_8; + rate /= 8; + } else if (parent_rate > 80000000) { + idiv = SI5351_CLKIN_DIV_4; + rate /= 4; + } else if (parent_rate > 40000000) { + idiv = SI5351_CLKIN_DIV_2; + rate /= 2; + } else + idiv = SI5351_CLKIN_DIV_1; + + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, + SI5351_CLKIN_DIV_MASK, idiv); + + dev_dbg(&drvdata->client->dev, "%s - clkin div = %d, rate = %lu\n", + __func__, (1 << (idiv >> 6)), rate); + + return rate; +} + +static const struct clk_ops si5351_clkin_ops = { + .prepare = si5351_clkin_prepare, + .unprepare = si5351_clkin_unprepare, + .recalc_rate = si5351_clkin_recalc_rate, +}; + +/* + * Si5351 vxco clock input (Si5351B only) + */ + +static int si5351_vxco_prepare(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + dev_warn(&hwdata->drvdata->client->dev, "VXCO currently unsupported\n"); + + return 0; +} + +static void si5351_vxco_unprepare(struct clk_hw *hw) +{ +} + +static unsigned long si5351_vxco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 0; +} + +static int si5351_vxco_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent) +{ + return 0; +} + +static const struct clk_ops si5351_vxco_ops = { + .prepare = si5351_vxco_prepare, + .unprepare = si5351_vxco_unprepare, + .recalc_rate = si5351_vxco_recalc_rate, + .set_rate = si5351_vxco_set_rate, +}; + +/* + * Si5351 pll a/b + * + * Feedback Multisynth Divider Equations [2] + * + * fVCO = fIN * (a + b/c) + * + * with 15 + 0/1048575 <= (a + b/c) <= 90 + 0/1048575 and + * fIN = fXTAL or fIN = fCLKIN/CLKIN_DIV + * + * Feedback Multisynth Register Equations + * + * (1) MSNx_P1[17:0] = 128 * a + floor(128 * b/c) - 512 + * (2) MSNx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c + * (3) MSNx_P3[19:0] = c + * + * Transposing (2) yields: (4) floor(128 * b/c) = (128 * b / MSNx_P2)/c + * + * Using (4) on (1) yields: + * MSNx_P1 = 128 * a + (128 * b/MSNx_P2)/c - 512 + * MSNx_P1 + 512 + MSNx_P2/c = 128 * a + 128 * b/c + * + * a + b/c = (MSNx_P1 + MSNx_P2/MSNx_P3 + 512)/128 + * = (MSNx_P1*MSNx_P3 + MSNx_P2 + 512*MSNx_P3)/(128*MSNx_P3) + * + */ +static inline int _si5351_pll_reparent(struct si5351_driver_data *drvdata, + unsigned char num, unsigned char parent) +{ + if (num > 2 || + (drvdata->variant == SI5351_VARIANT_B && num > 1)) + return -EINVAL; + + if (drvdata->variant != SI5351_VARIANT_C && parent > 0) + return -EINVAL; + + return clk_set_parent(drvdata->pll[num].hw.clk, (parent) ? + drvdata->clkin.clk : drvdata->xtal.clk); +} + +static unsigned char si5351_pll_get_parent(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char mask = (hwdata->num == 0) ? + SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE; + unsigned char val; + + val = si5351_reg_read(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE); + + return (val & mask) ? 1 : 0; +} + +static int si5351_pll_set_parent(struct clk_hw *hw, u8 index) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char mask = (hwdata->num == 0) ? + SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE; + + if (hwdata->drvdata->variant != SI5351_VARIANT_C && + index > 0) + return -EPERM; + + if (index > 1) + return -EINVAL; + + si5351_set_bits(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE, + mask, (index) ? 0 : mask); + + return 0; +} + +static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg = (hwdata->num == 0) ? + SI5351_PLLA_PARAMETERS : SI5351_PLLB_PARAMETERS; + unsigned long long rate; + + if (!hwdata->params.valid) + si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params); + + if (hwdata->params.p3 == 0) + return parent_rate; + + /* fVCO = fIN * (P1*P3 + 512*P3 + P2)/(128*P3) */ + rate = hwdata->params.p1 * hwdata->params.p3; + rate += 512 * hwdata->params.p3; + rate += hwdata->params.p2; + rate *= parent_rate; + do_div(rate, 128 * hwdata->params.p3); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + parent_rate, (unsigned long)rate); + + return (unsigned long)rate; +} + +static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned long rfrac, denom, a, b, c; + unsigned long long lltmp; + + if (rate < SI5351_PLL_VCO_MIN) + rate = SI5351_PLL_VCO_MIN; + if (rate > SI5351_PLL_VCO_MAX) + rate = SI5351_PLL_VCO_MAX; + + /* determine integer part of feedback equation */ + a = rate / *parent_rate; + + if (a < SI5351_PLL_A_MIN) + rate = *parent_rate * SI5351_PLL_A_MIN; + if (a > SI5351_PLL_A_MAX) + rate = *parent_rate * SI5351_PLL_A_MAX; + + /* find best approximation for b/c = fVCO mod fIN */ + denom = 1000 * 1000; + lltmp = rate % (*parent_rate); + lltmp *= denom; + do_div(lltmp, *parent_rate); + rfrac = (unsigned long)lltmp; + + b = 0; + c = 1; + if (rfrac) + rational_best_approximation(rfrac, denom, + SI5351_PLL_B_MAX, SI5351_PLL_C_MAX, + &b, &c); + + /* calculate parameters */ + hwdata->params.p3 = c; + hwdata->params.p2 = (128 * b) % c; + hwdata->params.p1 = 128 * a; + hwdata->params.p1 += (128 * b / c); + hwdata->params.p1 -= 512; + + /* recalculate rate by fIN * (a + b/c) */ + lltmp = *parent_rate; + lltmp *= b; + do_div(lltmp, c); + + rate = (unsigned long)lltmp; + rate += *parent_rate * a; + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, a, b, c, *parent_rate, rate); + + return rate; +} + +static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg = (hwdata->num == 0) ? + SI5351_PLLA_PARAMETERS : SI5351_PLLB_PARAMETERS; + unsigned char val; + + /* write multisynth parameters */ + si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params); + + /* plla/pllb ctrl is in clk6/clk7 ctrl registers */ + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_CTRL + hwdata->num, + SI5351_CLK_INTEGER_MODE, + (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); + + /* reset pll */ + val = (hwdata->num == 0) ? SI5351_PLL_RESET_A : SI5351_PLL_RESET_B; + si5351_set_bits(hwdata->drvdata, SI5351_PLL_RESET, val, val); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + parent_rate, rate); + + return 0; +} + +static const struct clk_ops si5351_pll_ops = { + .set_parent = si5351_pll_set_parent, + .get_parent = si5351_pll_get_parent, + .recalc_rate = si5351_pll_recalc_rate, + .round_rate = si5351_pll_round_rate, + .set_rate = si5351_pll_set_rate, +}; + +/* + * Si5351 multisync divider + * + * for fOUT <= 150 MHz: + * + * fOUT = (fIN * (a + b/c)) / CLKOUTDIV + * + * with 6 + 0/1048575 <= (a + b/c) <= 1800 + 0/1048575 and + * fIN = fVCO0, fVCO1, fXTAL or fCLKIN/CLKIN_DIV + * + * Output Clock Multisynth Register Equations + * + * MSx_P1[17:0] = 128 * a + floor(128 * b/c) - 512 + * MSx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c + * MSx_P3[19:0] = c + * + * MS[6,7] are integer (P1) divide only, P2 = 0, P3 = 0 + * + * for 150MHz < fOUT <= 160MHz: + * + * MSx_P1 = 0, MSx_P2 = 0, MSx_P3 = 1, MSx_INT = 1, MSx_DIVBY4 = 11b + */ +static inline void _si5351_msynth_set_pll_master( + struct si5351_driver_data *drvdata, unsigned char num, int is_master) +{ + if (num > 8 || + (drvdata->variant == SI5351_VARIANT_A3 && num > 3)) + return; + + if (is_master) + drvdata->msynth[num].hw.clk->flags |= CLK_SET_RATE_PARENT; + else + drvdata->msynth[num].hw.clk->flags &= ~CLK_SET_RATE_PARENT; +} + +static inline int _si5351_msynth_reparent(struct si5351_driver_data *drvdata, + unsigned char num, unsigned char parent) +{ + if (parent > 2) + return -EINVAL; + + if (num > 8 || + (drvdata->variant == SI5351_VARIANT_A3 && num > 3)) + return -EINVAL; + + return clk_set_parent(drvdata->msynth[num].hw.clk, + drvdata->pll[parent].hw.clk); +} + +static unsigned char si5351_msynth_get_parent(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char val; + + val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num); + + return (val & SI5351_CLK_PLL_SELECT) ? 1 : 0; +} + +static int si5351_msynth_set_parent(struct clk_hw *hw, u8 index) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_PLL_SELECT, + (index) ? SI5351_CLK_PLL_SELECT : 0); + + return 0; +} + +static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg = SI5351_CLK0_PARAMETERS + + (SI5351_PARAMETERS_LENGTH * hwdata->num); + unsigned long long rate; + unsigned long m; + + if (!hwdata->params.valid) + si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params); + + if (hwdata->params.p3 == 0) + return parent_rate; + + /* + * multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3) + * multisync6-7: fOUT = fIN / P1 + */ + rate = parent_rate; + if (hwdata->num > 5) + m = hwdata->params.p1; + else if ((si5351_reg_read(hwdata->drvdata, reg + 2) & + SI5351_OUTPUT_CLK_DIVBY4) == SI5351_OUTPUT_CLK_DIVBY4) + m = 4; + else { + rate *= 128 * hwdata->params.p3; + m = hwdata->params.p1 * hwdata->params.p3; + m += hwdata->params.p2; + m += 512 * hwdata->params.p3; + } + do_div(rate, m); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + m, parent_rate, (unsigned long)rate); + + return (unsigned long)rate; +} + +static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned long long lltmp; + unsigned long a, b, c; + int divby4; + + /* multisync6-7 can only handle freqencies < 150MHz */ + if (hwdata->num >= 6 && rate > SI5351_MULTISYNTH67_MAX_FREQ) + rate = SI5351_MULTISYNTH67_MAX_FREQ; + + /* multisync frequency is 1MHz .. 160MHz */ + if (rate > SI5351_MULTISYNTH_MAX_FREQ) + rate = SI5351_MULTISYNTH_MAX_FREQ; + if (rate < SI5351_MULTISYNTH_MIN_FREQ) + rate = SI5351_MULTISYNTH_MIN_FREQ; + + divby4 = 0; + if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ) + divby4 = 1; + + /* multisync can set pll */ + if (hwdata->hw.clk->flags & CLK_SET_RATE_PARENT) { + /* + * find largest integer divider for max + * vco frequency and given target rate + */ + if (divby4 == 0) { + lltmp = SI5351_PLL_VCO_MAX; + do_div(lltmp, rate); + a = (unsigned long)lltmp; + } else + a = 4; + + b = 0; + c = 1; + + *parent_rate = a * rate; + } else { + unsigned long rfrac, denom; + + /* disable divby4 */ + if (divby4) { + rate = SI5351_MULTISYNTH_DIVBY4_FREQ; + divby4 = 0; + } + + /* determine integer part of divider equation */ + a = *parent_rate / rate; + if (a < SI5351_MULTISYNTH_A_MIN) + a = SI5351_MULTISYNTH_A_MIN; + if (hwdata->num >= 6 && a > SI5351_MULTISYNTH67_A_MAX) + a = SI5351_MULTISYNTH67_A_MAX; + else if (a > SI5351_MULTISYNTH_A_MAX) + a = SI5351_MULTISYNTH_A_MAX; + + /* find best approximation for b/c = fVCO mod fOUT */ + denom = 1000 * 1000; + lltmp = (*parent_rate) % rate; + lltmp *= denom; + do_div(lltmp, rate); + rfrac = (unsigned long)lltmp; + + b = 0; + c = 1; + if (rfrac) + rational_best_approximation(rfrac, denom, + SI5351_MULTISYNTH_B_MAX, SI5351_MULTISYNTH_C_MAX, + &b, &c); + } + + /* recalculate rate by fOUT = fIN / (a + b/c) */ + lltmp = *parent_rate; + lltmp *= c; + do_div(lltmp, a * c + b); + rate = (unsigned long)lltmp; + + /* calculate parameters */ + if (divby4) { + hwdata->params.p3 = 1; + hwdata->params.p2 = 0; + hwdata->params.p1 = 0; + } else { + hwdata->params.p3 = c; + hwdata->params.p2 = (128 * b) % c; + hwdata->params.p1 = 128 * a; + hwdata->params.p1 += (128 * b / c); + hwdata->params.p1 -= 512; + } + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, a, b, c, divby4, *parent_rate, + rate); + + return rate; +} + +static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg = SI5351_CLK0_PARAMETERS + + (SI5351_PARAMETERS_LENGTH * hwdata->num); + int divby4 = 0; + + /* write multisynth parameters */ + si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params); + + if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ) + divby4 = 1; + + /* enable/disable integer mode and divby4 on multisynth0-5 */ + if (hwdata->num < 6) { + si5351_set_bits(hwdata->drvdata, reg + 2, + SI5351_OUTPUT_CLK_DIVBY4, + (divby4) ? SI5351_OUTPUT_CLK_DIVBY4 : 0); + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_INTEGER_MODE, + (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); + } + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, + divby4, parent_rate, rate); + + return 0; +} + +static const struct clk_ops si5351_msynth_ops = { + .set_parent = si5351_msynth_set_parent, + .get_parent = si5351_msynth_get_parent, + .recalc_rate = si5351_msynth_recalc_rate, + .round_rate = si5351_msynth_round_rate, + .set_rate = si5351_msynth_set_rate, +}; + +/* + * Si5351 clkout divider + */ +static int _si5351_clkout_set_drive_strength(struct si5351_driver_data *drvdata, + unsigned char num, unsigned char drive) +{ + if (num > 8 || + (drvdata->variant == SI5351_VARIANT_A3 && num > 3)) + return -EINVAL; + + switch (drive) { + case 2: + drive = SI5351_CLK_DRIVE_2MA; + break; + case 4: + drive = SI5351_CLK_DRIVE_4MA; + break; + case 6: + drive = SI5351_CLK_DRIVE_6MA; + break; + case 8: + drive = SI5351_CLK_DRIVE_8MA; + break; + default: + return -EINVAL; + } + + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, + SI5351_CLK_DRIVE_MASK, drive); + + return 0; +} + +static inline int _si5351_clkout_reparent(struct si5351_driver_data *drvdata, + unsigned char num, unsigned char parent) +{ + struct clk *pclk; + + if (num > 8 || + (drvdata->variant == SI5351_VARIANT_A3 && num > 3)) + return -EINVAL; + + drvdata->clkout[num].hw.clk->flags &= ~CLK_SET_RATE_PARENT; + switch (parent) { + case 0: + pclk = drvdata->msynth[num].hw.clk; + drvdata->clkout[num].hw.clk->flags |= CLK_SET_RATE_PARENT; + break; + case 1: + pclk = drvdata->msynth[0].hw.clk; + if (num >= 4) + pclk = drvdata->msynth[4].hw.clk; + break; + case 2: + pclk = drvdata->xtal.clk; + break; + case 3: + if (drvdata->variant != SI5351_VARIANT_C) + return -EINVAL; + pclk = drvdata->clkin.clk; + break; + default: + return -EINVAL; + } + return clk_set_parent(drvdata->clkout[num].hw.clk, pclk); +} + +static int si5351_clkout_prepare(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, 0); + si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL, + (1 << hwdata->num), 0); + return 0; +} + +static void si5351_clkout_unprepare(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN); + si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL, + (1 << hwdata->num), (1 << hwdata->num)); +} + +static u8 si5351_clkout_get_parent(struct clk_hw *hw) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + int index = 0; + unsigned char val; + + val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num); + switch (val & SI5351_CLK_INPUT_MASK) { + case SI5351_CLK_INPUT_MULTISYNTH_N: + index = 0; + break; + case SI5351_CLK_INPUT_MULTISYNTH_0_4: + index = 1; + break; + case SI5351_CLK_INPUT_XTAL: + index = 2; + break; + case SI5351_CLK_INPUT_CLKIN: + index = 3; + break; + } + + return index; +} + +static int si5351_clkout_set_parent(struct clk_hw *hw, u8 index) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned val; + + val = 0; + hw->clk->flags &= ~CLK_SET_RATE_PARENT; + switch (index) { + case 0: + hw->clk->flags |= CLK_SET_RATE_PARENT; + val = SI5351_CLK_INPUT_MULTISYNTH_N; + break; + case 1: + /* clk0/clk4 can only connect to its own multisync */ + if (hwdata->num == 0 || hwdata->num == 4) + val = SI5351_CLK_INPUT_MULTISYNTH_N; + else + val = SI5351_CLK_INPUT_MULTISYNTH_0_4; + break; + case 2: + val = SI5351_CLK_INPUT_XTAL; + break; + case 3: + val = SI5351_CLK_INPUT_CLKIN; + break; + } + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_INPUT_MASK, val); + + return 0; +} + +static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg = SI5351_CLK0_PARAMETERS + + (SI5351_PARAMETERS_LENGTH * hwdata->num); + unsigned char rdiv; + + rdiv = (si5351_reg_read(hwdata->drvdata, reg + 2) & + SI5351_OUTPUT_CLK_DIV_MASK) >> SI5351_OUTPUT_CLK_DIV_SHIFT; + + return parent_rate >> rdiv; +} + +static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char rdiv; + + /* clkout6/7 can only handle output freqencies < 150MHz */ + if (hwdata->num >= 6 && rate > SI5351_CLKOUT67_MAX_FREQ) + rate = SI5351_CLKOUT67_MAX_FREQ; + + /* clkout freqency is 8kHz - 160MHz */ + if (rate > SI5351_CLKOUT_MAX_FREQ) + rate = SI5351_CLKOUT_MAX_FREQ; + if (rate < SI5351_CLKOUT_MIN_FREQ) + rate = SI5351_CLKOUT_MIN_FREQ; + + /* request frequency if multisync master */ + if (hwdata->hw.clk->flags & CLK_SET_RATE_PARENT) { + /* use r divider for frequencies below 1MHz */ + rdiv = SI5351_OUTPUT_CLK_DIV_1; + while (rate < SI5351_MULTISYNTH_MIN_FREQ && + rdiv < SI5351_OUTPUT_CLK_DIV_128) { + rdiv += 1; + rate *= 2; + } + *parent_rate = rate; + } else { + unsigned long new_rate, new_err, err; + + /* round to closed rdiv */ + rdiv = SI5351_OUTPUT_CLK_DIV_1; + new_rate = *parent_rate; + err = abs(new_rate - rate); + do { + new_rate >>= 1; + new_err = abs(new_rate - rate); + if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128) + break; + rdiv++; + err = new_err; + } while (1); + } + rate = *parent_rate >> rdiv; + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, (1 << rdiv), *parent_rate, + rate); + + return rate; +} + +static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct si5351_hw_data *hwdata = + container_of(hw, struct si5351_hw_data, hw); + unsigned char reg = SI5351_CLK0_PARAMETERS + + (SI5351_PARAMETERS_LENGTH * hwdata->num); + unsigned long new_rate, new_err, err; + unsigned char rdiv; + + /* round to closed rdiv */ + rdiv = SI5351_OUTPUT_CLK_DIV_1; + new_rate = parent_rate; + err = abs(new_rate - rate); + do { + new_rate >>= 1; + new_err = abs(new_rate - rate); + if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128) + break; + rdiv++; + err = new_err; + } while (1); + + /* powerdown clkout */ + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN); + + /* write output divider */ + switch (hwdata->num) { + case 6: + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER, + SI5351_OUTPUT_CLK6_DIV_MASK, rdiv); + break; + case 7: + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER, + SI5351_OUTPUT_CLK_DIV_MASK, + rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT); + break; + default: + si5351_set_bits(hwdata->drvdata, reg + 2, + SI5351_OUTPUT_CLK_DIV_MASK, + rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT); + } + + /* powerup clkout */ + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, + SI5351_CLK_POWERDOWN, 0); + + dev_dbg(&hwdata->drvdata->client->dev, + "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n", + __func__, hwdata->hw.clk->name, (1 << rdiv), parent_rate, rate); + + return 0; +} + +static const struct clk_ops si5351_clkout_ops = { + .prepare = si5351_clkout_prepare, + .unprepare = si5351_clkout_unprepare, + .set_parent = si5351_clkout_set_parent, + .get_parent = si5351_clkout_get_parent, + .recalc_rate = si5351_clkout_recalc_rate, + .round_rate = si5351_clkout_round_rate, + .set_rate = si5351_clkout_set_rate, +}; + +/* + * Si5351 i2c probe and DT + */ +static void si5351_dt_setup( + struct i2c_client *client, struct si5351_driver_data *drvdata) +{ + struct device_node *np = client->dev.of_node; + struct property *prop; + const __be32 *p; + unsigned int num, val; + + if (np == NULL) + return; + + /* + * property pll-source : , [<..>] + * allow to selectively set pll source + */ + of_property_for_each_u32(client->dev.of_node, "pll-source", + prop, p, num) { + if (num >= 2) { + dev_err(&client->dev, + "invalid pll %d on pll-source prop\n", num); + break; + } + + p = of_prop_next_u32(prop, p, &val); + if (!p) + break; + + if (_si5351_pll_reparent(drvdata, num, val)) + dev_warn(&client->dev, + "unable to reparent pll %d to %d\n", + num, val); + } + + for_each_child_of_node(client->dev.of_node, np) { + if (of_property_read_u32(np, "reg", &num)) { + dev_err(&client->dev, "missing reg property of %s\n", + np->full_name); + continue; + } + + if (of_property_read_bool(np, "pll-master")) + _si5351_msynth_set_pll_master(drvdata, num, 1); + + if (!of_property_read_u32(np, "drive-strength", &val)) { + if (_si5351_clkout_set_drive_strength(drvdata, + num, val)) + dev_warn(&client->dev, + "unable to set drive strength of %d to %d\n", + num, val); + } + + if (!of_property_read_u32(np, "multisynth-source", &val)) { + if (_si5351_msynth_reparent(drvdata, num, val)) + dev_warn(&client->dev, + "unable to reparent multisynth %d to %d\n", + num, val); + } + + if (!of_property_read_u32(np, "clock-source", &val)) { + if (_si5351_clkout_reparent(drvdata, num, val)) + dev_warn(&client->dev, + "unable to reparent clockout %d to %d\n", + num, val); + } + + if (!of_property_read_u32(np, "clock-frequency", &val)) + clk_set_rate(drvdata->onecell.clks[num], val); + } +} + +static const struct of_device_id si5351_dt_ids[] = { + { .compatible = "silabs,si5351a", .data = (void *)SI5351_VARIANT_A, }, + { .compatible = "silabs,si5351a-msop", + .data = (void *)SI5351_VARIANT_A3, }, + { .compatible = "silabs,si5351b", .data = (void *)SI5351_VARIANT_B, }, + { .compatible = "silabs,si5351c", .data = (void *)SI5351_VARIANT_C, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, si5351_dt_ids); + +static int si5351_dt_parse( + struct i2c_client *client, struct si5351_driver_data *drvdata) +{ + struct device_node *np = client->dev.of_node; + const struct of_device_id *match; + + if (np == NULL) + return -EINVAL; + + match = of_match_node(si5351_dt_ids, np); + if (match == NULL) + return -EINVAL; + + drvdata->variant = (enum si5351_variant)match->data; + drvdata->pxtal = of_clk_get(np, 0); + drvdata->pclkin = of_clk_get(np, 1); + + return 0; +} + +static int si5351_i2c_probe( + struct i2c_client *client, const struct i2c_device_id *id) +{ + struct si5351_driver_data *drvdata; + struct clk_init_data init; + struct clk *clk; + const char *parent_names[4]; + u8 num_parents, num_clocks; + int ret, n; + + drvdata = devm_kzalloc(&client->dev, sizeof(struct si5351_driver_data), + GFP_KERNEL); + if (drvdata == NULL) { + dev_err(&client->dev, "unable to allocate driver data\n"); + return -ENOMEM; + } + + ret = si5351_dt_parse(client, drvdata); + if (ret) + return ret; + + i2c_set_clientdata(client, drvdata); + drvdata->client = client; + drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config); + if (IS_ERR(drvdata->regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(drvdata->regmap); + } + + /* Disable interrupts */ + si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0); + /* Set disabled output drivers to drive low */ + si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00); + si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00); + /* Ensure pll select is on XTAL for Si5351A/B */ + if (drvdata->variant != SI5351_VARIANT_C) + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, + SI5351_PLLA_SOURCE | SI5351_PLLB_SOURCE, 0); + + /* register xtal input clock gate */ + memset(&init, 0, sizeof(struct clk_init_data)); + init.name = si5351_input_names[0]; + init.ops = &si5351_xtal_ops; + init.flags = 0; + if (!IS_ERR(drvdata->pxtal)) { + init.parent_names = &drvdata->pxtal->name; + init.num_parents = 1; + } + drvdata->xtal.init = &init; + clk = devm_clk_register(&client->dev, &drvdata->xtal); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", init.name); + return PTR_ERR(clk); + } + + /* register clkin input clock gate */ + if (drvdata->variant == SI5351_VARIANT_C) { + memset(&init, 0, sizeof(struct clk_init_data)); + init.name = si5351_input_names[1]; + init.ops = &si5351_clkin_ops; + if (!IS_ERR(drvdata->pclkin)) { + init.parent_names = &drvdata->pclkin->name; + init.num_parents = 1; + } + drvdata->clkin.init = &init; + clk = devm_clk_register(&client->dev, &drvdata->clkin); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + return PTR_ERR(clk); + } + } + + /* Si5351C allows to mux either xtal or clkin to PLL input */ + num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 2 : 1; + parent_names[0] = si5351_input_names[0]; + parent_names[1] = si5351_input_names[1]; + + /* register PLLA */ + drvdata->pll[0].num = 0; + drvdata->pll[0].drvdata = drvdata; + drvdata->pll[0].hw.init = &init; + memset(&init, 0, sizeof(struct clk_init_data)); + init.name = si5351_pll_names[0]; + init.ops = &si5351_pll_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = num_parents; + clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", init.name); + return -EINVAL; + } + + /* register PLLB or VXCO (Si5351B) */ + drvdata->pll[1].num = 1; + drvdata->pll[1].drvdata = drvdata; + drvdata->pll[1].hw.init = &init; + memset(&init, 0, sizeof(struct clk_init_data)); + if (drvdata->variant == SI5351_VARIANT_B) { + init.name = si5351_pll_names[2]; + init.ops = &si5351_vxco_ops; + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + } else { + init.name = si5351_pll_names[1]; + init.ops = &si5351_pll_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = num_parents; + } + clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", init.name); + return -EINVAL; + } + + /* register clk multisync and clk out divider */ + num_clocks = (drvdata->variant == SI5351_VARIANT_A3) ? 3 : 8; + parent_names[0] = si5351_pll_names[0]; + if (drvdata->variant == SI5351_VARIANT_B) + parent_names[1] = si5351_pll_names[2]; + else + parent_names[1] = si5351_pll_names[1]; + + drvdata->msynth = devm_kzalloc(&client->dev, + num_clocks * sizeof(struct si5351_hw_data), GFP_KERNEL); + + drvdata->clkout = devm_kzalloc(&client->dev, + num_clocks * sizeof(struct si5351_hw_data), GFP_KERNEL); + + drvdata->onecell.clk_num = num_clocks; + drvdata->onecell.clks = devm_kzalloc(&client->dev, + num_clocks * sizeof(struct clk *), GFP_KERNEL); + + if (WARN_ON(!drvdata->msynth || !drvdata->clkout || + !drvdata->onecell.clks)) + return -ENOMEM; + + for (n = 0; n < num_clocks; n++) { + drvdata->msynth[n].num = n; + drvdata->msynth[n].drvdata = drvdata; + drvdata->msynth[n].hw.init = &init; + memset(&init, 0, sizeof(struct clk_init_data)); + init.name = si5351_msynth_names[n]; + init.ops = &si5351_msynth_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = 2; + clk = devm_clk_register(&client->dev, &drvdata->msynth[n].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + return -EINVAL; + } + } + + num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 4 : 3; + parent_names[2] = si5351_input_names[0]; + parent_names[3] = si5351_input_names[1]; + for (n = 0; n < num_clocks; n++) { + parent_names[0] = si5351_msynth_names[n]; + parent_names[1] = (n < 4) ? si5351_msynth_names[0] : + si5351_msynth_names[4]; + + drvdata->clkout[n].num = n; + drvdata->clkout[n].drvdata = drvdata; + drvdata->clkout[n].hw.init = &init; + memset(&init, 0, sizeof(struct clk_init_data)); + init.name = si5351_clkout_names[n]; + init.ops = &si5351_clkout_ops; + init.flags = 0; + init.parent_names = parent_names; + init.num_parents = num_parents; + clk = devm_clk_register(&client->dev, &drvdata->clkout[n].hw); + if (IS_ERR(clk)) { + dev_err(&client->dev, "unable to register %s\n", + init.name); + return -EINVAL; + } + drvdata->onecell.clks[n] = clk; + } + + /* setup clock setup from DT */ + si5351_dt_setup(client, drvdata); + + of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get, + &drvdata->onecell); + + dev_info(&client->dev, "registered si5351 i2c client\n"); + + return 0; +} + +static int si5351_i2c_remove(struct i2c_client *client) +{ + i2c_set_clientdata(client, NULL); + return 0; +} + +static const struct i2c_device_id si5351_i2c_ids[] = { + { "silabs,si5351", SI5351_BUS_BASE_ADDR | 0 }, + { "silabs,si5351", SI5351_BUS_BASE_ADDR | 1 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids); + +static struct i2c_driver si5351_driver = { + .driver = { + .name = "si5351", + .of_match_table = si5351_dt_ids, + }, + .probe = si5351_i2c_probe, + .remove = si5351_i2c_remove, + .id_table = si5351_i2c_ids, +}; + +static int __init si5351_module_init(void) +{ + return i2c_add_driver(&si5351_driver); +} +module_init(si5351_module_init); + +static void __exit si5351_module_exit(void) +{ + i2c_del_driver(&si5351_driver); +} +module_exit(si5351_module_exit); + +MODULE_AUTHOR("Sebastian Hesselbarth + * Rabeeh Khoury + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _CLK_SI5351_H_ +#define _CLK_SI5351_H_ + +#define SI5351_BUS_BASE_ADDR 0x60 + +#define SI5351_PLL_VCO_MIN 600000000 +#define SI5351_PLL_VCO_MAX 900000000 +#define SI5351_MULTISYNTH_MIN_FREQ 1000000 +#define SI5351_MULTISYNTH_DIVBY4_FREQ 150000000 +#define SI5351_MULTISYNTH_MAX_FREQ 160000000 +#define SI5351_MULTISYNTH67_MAX_FREQ SI5351_MULTISYNTH_DIVBY4_FREQ +#define SI5351_CLKOUT_MIN_FREQ 8000 +#define SI5351_CLKOUT_MAX_FREQ SI5351_MULTISYNTH_MAX_FREQ +#define SI5351_CLKOUT67_MAX_FREQ SI5351_MULTISYNTH67_MAX_FREQ + +#define SI5351_PLL_A_MIN 15 +#define SI5351_PLL_A_MAX 90 +#define SI5351_PLL_B_MAX (SI5351_PLL_C_MAX-1) +#define SI5351_PLL_C_MAX 1048575 +#define SI5351_MULTISYNTH_A_MIN 6 +#define SI5351_MULTISYNTH_A_MAX 1800 +#define SI5351_MULTISYNTH67_A_MAX 254 +#define SI5351_MULTISYNTH_B_MAX (SI5351_MULTISYNTH_C_MAX-1) +#define SI5351_MULTISYNTH_C_MAX 1048575 +#define SI5351_MULTISYNTH_P1_MAX ((1<<18)-1) +#define SI5351_MULTISYNTH_P2_MAX ((1<<20)-1) +#define SI5351_MULTISYNTH_P3_MAX ((1<<20)-1) + +#define SI5351_DEVICE_STATUS 0 +#define SI5351_INTERRUPT_STATUS 1 +#define SI5351_INTERRUPT_MASK 2 +#define SI5351_STATUS_SYS_INIT (1<<7) +#define SI5351_STATUS_LOL_B (1<<6) +#define SI5351_STATUS_LOL_A (1<<5) +#define SI5351_STATUS_LOS (1<<4) +#define SI5351_OUTPUT_ENABLE_CTRL 3 +#define SI5351_OEB_PIN_ENABLE_CTRL 9 +#define SI5351_PLL_INPUT_SOURCE 15 +#define SI5351_CLKIN_DIV_MASK (3<<6) +#define SI5351_CLKIN_DIV_1 (0<<6) +#define SI5351_CLKIN_DIV_2 (1<<6) +#define SI5351_CLKIN_DIV_4 (2<<6) +#define SI5351_CLKIN_DIV_8 (3<<6) +#define SI5351_PLLB_SOURCE (1<<3) +#define SI5351_PLLA_SOURCE (1<<2) + +#define SI5351_CLK0_CTRL 16 +#define SI5351_CLK1_CTRL 17 +#define SI5351_CLK2_CTRL 18 +#define SI5351_CLK3_CTRL 19 +#define SI5351_CLK4_CTRL 20 +#define SI5351_CLK5_CTRL 21 +#define SI5351_CLK6_CTRL 22 +#define SI5351_CLK7_CTRL 23 +#define SI5351_CLK_POWERDOWN (1<<7) +#define SI5351_CLK_INTEGER_MODE (1<<6) +#define SI5351_CLK_PLL_SELECT (1<<5) +#define SI5351_CLK_INVERT (1<<4) +#define SI5351_CLK_INPUT_MASK (3<<2) +#define SI5351_CLK_INPUT_XTAL (0<<2) +#define SI5351_CLK_INPUT_CLKIN (1<<2) +#define SI5351_CLK_INPUT_MULTISYNTH_0_4 (2<<2) +#define SI5351_CLK_INPUT_MULTISYNTH_N (3<<2) +#define SI5351_CLK_DRIVE_MASK (3<<0) +#define SI5351_CLK_DRIVE_2MA (0<<0) +#define SI5351_CLK_DRIVE_4MA (1<<0) +#define SI5351_CLK_DRIVE_6MA (2<<0) +#define SI5351_CLK_DRIVE_8MA (3<<0) + +#define SI5351_CLK3_0_DISABLE_STATE 24 +#define SI5351_CLK7_4_DISABLE_STATE 25 +#define SI5351_CLK_DISABLE_STATE_LOW 0 +#define SI5351_CLK_DISABLE_STATE_HIGH 1 +#define SI5351_CLK_DISABLE_STATE_FLOAT 2 +#define SI5351_CLK_DISABLE_STATE_NEVER 3 + +#define SI5351_PARAMETERS_LENGTH 8 +#define SI5351_PLLA_PARAMETERS 26 +#define SI5351_PLLB_PARAMETERS 34 +#define SI5351_CLK0_PARAMETERS 42 +#define SI5351_CLK1_PARAMETERS 50 +#define SI5351_CLK2_PARAMETERS 58 +#define SI5351_CLK3_PARAMETERS 66 +#define SI5351_CLK4_PARAMETERS 74 +#define SI5351_CLK5_PARAMETERS 82 +#define SI5351_CLK6_PARAMETERS 90 +#define SI5351_CLK7_PARAMETERS 91 +#define SI5351_CLK6_7_OUTPUT_DIVIDER 92 +#define SI5351_OUTPUT_CLK_DIV_MASK (7 << 4) +#define SI5351_OUTPUT_CLK6_DIV_MASK (7 << 0) +#define SI5351_OUTPUT_CLK_DIV_SHIFT 4 +#define SI5351_OUTPUT_CLK_DIV6_SHIFT 0 +#define SI5351_OUTPUT_CLK_DIV_1 0 +#define SI5351_OUTPUT_CLK_DIV_2 1 +#define SI5351_OUTPUT_CLK_DIV_4 2 +#define SI5351_OUTPUT_CLK_DIV_8 3 +#define SI5351_OUTPUT_CLK_DIV_16 4 +#define SI5351_OUTPUT_CLK_DIV_32 5 +#define SI5351_OUTPUT_CLK_DIV_64 6 +#define SI5351_OUTPUT_CLK_DIV_128 7 +#define SI5351_OUTPUT_CLK_DIVBY4 (3<<2) + +#define SI5351_SSC_PARAM0 149 +#define SI5351_SSC_PARAM1 150 +#define SI5351_SSC_PARAM2 151 +#define SI5351_SSC_PARAM3 152 +#define SI5351_SSC_PARAM4 153 +#define SI5351_SSC_PARAM5 154 +#define SI5351_SSC_PARAM6 155 +#define SI5351_SSC_PARAM7 156 +#define SI5351_SSC_PARAM8 157 +#define SI5351_SSC_PARAM9 158 +#define SI5351_SSC_PARAM10 159 +#define SI5351_SSC_PARAM11 160 +#define SI5351_SSC_PARAM12 161 + +#define SI5351_VXCO_PARAMETERS_LOW 162 +#define SI5351_VXCO_PARAMETERS_MID 163 +#define SI5351_VXCO_PARAMETERS_HIGH 164 + +#define SI5351_CLK0_PHASE_OFFSET 165 +#define SI5351_CLK1_PHASE_OFFSET 166 +#define SI5351_CLK2_PHASE_OFFSET 167 +#define SI5351_CLK3_PHASE_OFFSET 168 +#define SI5351_CLK4_PHASE_OFFSET 169 +#define SI5351_CLK5_PHASE_OFFSET 170 + +#define SI5351_PLL_RESET 177 +#define SI5351_PLL_RESET_B (1<<7) +#define SI5351_PLL_RESET_A (1<<5) + +#define SI5351_CRYSTAL_LOAD 183 +#define SI5351_CRYSTAL_LOAD_MASK (3<<6) +#define SI5351_CRYSTAL_LOAD_6PF (1<<6) +#define SI5351_CRYSTAL_LOAD_8PF (2<<6) +#define SI5351_CRYSTAL_LOAD_10PF (3<<6) + +#define SI5351_FANOUT_ENABLE 187 +#define SI5351_CLKIN_ENABLE (1<<7) +#define SI5351_XTAL_ENABLE (1<<6) +#define SI5351_MULTISYNTH_ENABLE (1<<4) + +#endif -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/