Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760764Ab3DBMyQ (ORCPT ); Tue, 2 Apr 2013 08:54:16 -0400 Received: from mail-lb0-f179.google.com ([209.85.217.179]:37731 "EHLO mail-lb0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760365Ab3DBMyP (ORCPT ); Tue, 2 Apr 2013 08:54:15 -0400 MIME-Version: 1.0 In-Reply-To: <20130331113844.GG16352@chmeee.dyndns.org> References: <20130331113844.GG16352@chmeee.dyndns.org> Date: Tue, 2 Apr 2013 14:54:13 +0200 Message-ID: Subject: Re: [PATCH] gma500: Make VGA and HDMI connector hotpluggable From: Patrik Jakobsson To: Kero Cc: David Airlie , dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2069 Lines: 49 On Sun, Mar 31, 2013 at 1:38 PM, Kero wrote: > From: Kero van Gelder > > Both VGA and HDMI connectors are available on my Asus EeePC X101CH. > This patch will cause output to be shown on either when plugged in. > For both, it shows the leftmost 800x600, of the 1024x600 on LVDS. > > Signed-off-by: Kero van Gelder > --- > diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c > index 8c17534..7b8386f 100644 > --- a/drivers/gpu/drm/gma500/cdv_intel_crt.c > +++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c > @@ -276,6 +276,7 @@ void cdv_intel_crt_init(struct drm_device *dev, > goto failed_connector; > > connector = &psb_intel_connector->base; > + connector->polled = DRM_CONNECTOR_POLL_HPD; > drm_connector_init(dev, connector, > &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); > > diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c > index e223b50..464153d 100644 > --- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c > +++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c > @@ -319,6 +319,7 @@ void cdv_hdmi_init(struct drm_device *dev, > goto err_priv; > > connector = &psb_intel_connector->base; > + connector->polled = DRM_CONNECTOR_POLL_HPD; > encoder = &psb_intel_encoder->base; > drm_connector_init(dev, connector, > &cdv_hdmi_connector_funcs, > -- Your patch has been applied to: https://github.com/patjak/drm-gma500.git gma500-next We might also consider polling if this causes problems for people, but for now this is fine. No biggie, but your tabs where converted to spaces so I recommend running checkpatch.pl before submitting. Thanks Patrik Jakobsson -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/