Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1762774Ab3DDP6I (ORCPT ); Thu, 4 Apr 2013 11:58:08 -0400 Received: from zmc.proxad.net ([212.27.53.206]:49910 "EHLO zmc.proxad.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1762612Ab3DDP5v (ORCPT ); Thu, 4 Apr 2013 11:57:51 -0400 From: Florian Fainelli To: stern@rowland.harvard.edu Cc: linux-kernel@vger.kernel.org, arnd@arndb.de, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, balbi@ti.com, Florian Fainelli Subject: [PATCH 1/5 v3] USB: regroup all depends on USB within an if USB block Date: Thu, 4 Apr 2013 17:57:24 +0200 Message-Id: <1365091048-16229-2-git-send-email-florian@openwrt.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1365091048-16229-1-git-send-email-florian@openwrt.org> References: <1365091048-16229-1-git-send-email-florian@openwrt.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20667 Lines: 681 This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Signed-off-by: Florian Fainelli --- Changes since v2: - properly keep USB_MUSB_HDRC dependency Changes since v1: - add missing if USB in drivers/usb/Kconfig before USB_USS720 Changes since RFC: - only remove the "depends on USB" conditionnals and not more as the RFC patch did drivers/usb/Kconfig | 23 +++++++++++++++-------- drivers/usb/atm/Kconfig | 2 +- drivers/usb/class/Kconfig | 6 +----- drivers/usb/core/Kconfig | 6 ------ drivers/usb/host/Kconfig | 30 +++++++++++------------------- drivers/usb/image/Kconfig | 4 +--- drivers/usb/misc/Kconfig | 21 --------------------- drivers/usb/misc/sisusbvga/Kconfig | 2 +- drivers/usb/mon/Kconfig | 1 - drivers/usb/musb/Kconfig | 2 +- drivers/usb/renesas_usbhs/Kconfig | 2 +- drivers/usb/serial/Kconfig | 2 +- drivers/usb/storage/Kconfig | 7 +++---- drivers/usb/wusbcore/Kconfig | 2 -- 14 files changed, 36 insertions(+), 74 deletions(-) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 640ae6c..24c14fc 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -122,9 +122,9 @@ config USB To compile this driver as a module, choose M here: the module will be called usbcore. -source "drivers/usb/core/Kconfig" +if USB -source "drivers/usb/dwc3/Kconfig" +source "drivers/usb/core/Kconfig" source "drivers/usb/mon/Kconfig" @@ -134,8 +134,6 @@ source "drivers/usb/host/Kconfig" source "drivers/usb/musb/Kconfig" -source "drivers/usb/chipidea/Kconfig" - source "drivers/usb/renesas_usbhs/Kconfig" source "drivers/usb/class/Kconfig" @@ -144,12 +142,19 @@ source "drivers/usb/storage/Kconfig" source "drivers/usb/image/Kconfig" +endif + +source "drivers/usb/dwc3/Kconfig" + +source "drivers/usb/chipidea/Kconfig" + comment "USB port drivers" - depends on USB + +if USB config USB_USS720 tristate "USS720 parport driver" - depends on USB && PARPORT + depends on PARPORT select PARPORT_NOT_PC ---help--- This driver is for USB parallel port adapters that use the Lucent @@ -180,10 +185,12 @@ source "drivers/usb/serial/Kconfig" source "drivers/usb/misc/Kconfig" -source "drivers/usb/phy/Kconfig" - source "drivers/usb/atm/Kconfig" +endif # USB + +source "drivers/usb/phy/Kconfig" + source "drivers/usb/gadget/Kconfig" source "drivers/usb/otg/Kconfig" diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index be0b8da..0f92294 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_ATM tristate "USB DSL modem support" - depends on USB && ATM + depends on ATM select CRC32 default n help diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 316aac8..bb8b736 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -2,11 +2,10 @@ # USB Class driver configuration # comment "USB Device Class drivers" - depends on USB config USB_ACM tristate "USB Modem (CDC ACM) support" - depends on USB && TTY + depends on TTY ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. @@ -21,7 +20,6 @@ config USB_ACM config USB_PRINTER tristate "USB Printer support" - depends on USB help Say Y here if you want to connect a USB printer to your computer's USB port. @@ -31,7 +29,6 @@ config USB_PRINTER config USB_WDM tristate "USB Wireless Device Management support" - depends on USB ---help--- This driver supports the WMC Device Management functionality of cell phones compliant to the CDC WMC specification. You can use @@ -42,7 +39,6 @@ config USB_WDM config USB_TMC tristate "USB Test and Measurement Class support" - depends on USB help Say Y here if you want to connect a USB device that follows the USB.org specification for USB Test and Measurement devices diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 7b7305e..8772b36 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -3,7 +3,6 @@ # config USB_DEBUG bool "USB verbose debug messages" - depends on USB help Say Y here if you want the USB core & hub drivers to produce a bunch of debug messages to the system log. Select this if you are having a @@ -11,7 +10,6 @@ config USB_DEBUG config USB_ANNOUNCE_NEW_DEVICES bool "USB announce new devices" - depends on USB default N help Say Y here if you want the USB core to always announce the @@ -25,11 +23,9 @@ config USB_ANNOUNCE_NEW_DEVICES log, or have any doubts about this, say N here. comment "Miscellaneous USB options" - depends on USB config USB_DEFAULT_PERSIST bool "Enable USB persist by default" - depends on USB default y help Say N here if you don't want USB power session persistance @@ -45,7 +41,6 @@ config USB_DEFAULT_PERSIST config USB_DYNAMIC_MINORS bool "Dynamic USB minor allocation" - depends on USB help If you say Y here, the USB subsystem will use dynamic minor allocation for any device that uses the USB major number. @@ -56,7 +51,6 @@ config USB_DYNAMIC_MINORS config USB_OTG bool "OTG support" - depends on USB depends on USB_SUSPEND default n help diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2f68221..7f4ccf7 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -2,11 +2,9 @@ # USB Host Controller Drivers # comment "USB Host Controller Drivers" - depends on USB config USB_C67X00_HCD tristate "Cypress C67x00 HCD support" - depends on USB help The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role host/peripheral/OTG USB controllers. @@ -19,7 +17,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" - depends on USB && USB_ARCH_HAS_XHCI + depends on USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -43,7 +41,7 @@ config USB_XHCI_HCD_DEBUGGING config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB && USB_ARCH_HAS_EHCI + depends on USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -247,7 +245,7 @@ config USB_EHCI_ATH79 config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on USB && GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -260,7 +258,6 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" - depends on USB ---help--- The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -272,7 +269,6 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -287,7 +283,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on USB default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -299,7 +294,7 @@ config USB_ISP1362_HCD config USB_OHCI_HCD tristate "OHCI HCD support" - depends on USB && USB_ARCH_HAS_OHCI + depends on USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP depends on USB_ISP1301 || !ARCH_LPC32XX @@ -458,7 +453,7 @@ config USB_OHCI_LITTLE_ENDIAN config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) + depends on PCI || SPARC_LEON || ARCH_VT8500 ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -498,7 +493,7 @@ config USB_UHCI_BIG_ENDIAN_DESC config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" - depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + depends on OF_GPIO && QE_GPIO && QUICC_ENGINE select FSL_GTM select QE_USB help @@ -515,7 +510,7 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" - depends on USB && USB_FTDI_ELAN + depends on USB_FTDI_ELAN default M help The U132 adapter is a USB to CardBus adapter specifically designed @@ -543,7 +538,6 @@ config USB_U132_HCD config USB_SL811_HCD tristate "SL811HS HCD support" - depends on USB help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your @@ -575,7 +569,6 @@ config USB_SL811_CS config USB_R8A66597_HCD tristate "R8A66597 HCD support" - depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. @@ -587,7 +580,6 @@ config USB_R8A66597_HCD config USB_RENESAS_USBHS_HCD tristate "Renesas USBHS HCD support" - depends on USB depends on USB_RENESAS_USBHS help The Renesas USBHS is a USB 2.0 host and peripheral controller. @@ -612,7 +604,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB + depends on UWB select USB_WUSB select UWB_HWA help @@ -626,7 +618,7 @@ config USB_HWA_HCD config USB_IMX21_HCD tristate "i.MX21 HCD support" - depends on USB && ARM && ARCH_MXC + depends on ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the i.MX21 processor. @@ -636,7 +628,7 @@ config USB_IMX21_HCD config USB_OCTEON_EHCI bool "Octeon on-chip EHCI support" - depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON + depends on USB_EHCI_HCD && CPU_CAVIUM_OCTEON default n select USB_EHCI_BIG_ENDIAN_MMIO help @@ -647,7 +639,7 @@ config USB_OCTEON_EHCI config USB_OCTEON_OHCI bool "Octeon on-chip OHCI support" - depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON + depends on USB_OHCI_HCD && CPU_CAVIUM_OCTEON default USB_OCTEON_EHCI select USB_OHCI_BIG_ENDIAN_MMIO select USB_OHCI_LITTLE_ENDIAN diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig index 33350f9..320d368 100644 --- a/drivers/usb/image/Kconfig +++ b/drivers/usb/image/Kconfig @@ -2,11 +2,9 @@ # USB Imaging devices configuration # comment "USB Imaging devices" - depends on USB config USB_MDC800 tristate "USB Mustek MDC800 Digital Camera support" - depends on USB ---help--- Say Y here if you want to connect this type of still camera to your computer's USB port. This driver can be used with gphoto 0.4.3 @@ -19,7 +17,7 @@ config USB_MDC800 config USB_MICROTEK tristate "Microtek X6USB scanner support" - depends on USB && SCSI + depends on SCSI help Say Y here if you want support for the Microtek X6USB and possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L. diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 3b1a3f4..a51e7d6 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -2,11 +2,9 @@ # USB Miscellaneous driver configuration # comment "USB Miscellaneous drivers" - depends on USB config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" - depends on USB ---help--- This driver loads firmware to Emagic EMI 6|2m low latency USB Audio and Midi interface. @@ -21,7 +19,6 @@ config USB_EMI62 config USB_EMI26 tristate "EMI 2|6 USB Audio interface support" - depends on USB ---help--- This driver loads firmware to Emagic EMI 2|6 low latency USB Audio interface. @@ -34,7 +31,6 @@ config USB_EMI26 config USB_ADUTUX tristate "ADU devices from Ontrak Control Systems" - depends on USB help Say Y if you want to use an ADU device from Ontrak Control Systems. @@ -44,7 +40,6 @@ config USB_ADUTUX config USB_SEVSEG tristate "USB 7-Segment LED Display" - depends on USB help Say Y here if you have a USB 7-Segment Display by Delcom @@ -53,7 +48,6 @@ config USB_SEVSEG config USB_RIO500 tristate "USB Diamond Rio500 support" - depends on USB help Say Y here if you want to connect a USB Rio500 mp3 player to your computer's USB port. Please read @@ -64,7 +58,6 @@ config USB_RIO500 config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" - depends on USB help Say Y here if you want to connect a USB Lego Infrared Tower to your computer's USB port. @@ -77,7 +70,6 @@ config USB_LEGOTOWER config USB_LCD tristate "USB LCD driver support" - depends on USB help Say Y here if you want to connect an USBLCD to your computer's USB port. The USBLCD is a small USB interface board for @@ -89,7 +81,6 @@ config USB_LCD config USB_LED tristate "USB LED driver support" - depends on USB help Say Y here if you want to connect an USBLED device to your computer's USB port. @@ -99,7 +90,6 @@ config USB_LED config USB_CYPRESS_CY7C63 tristate "Cypress CY7C63xxx USB driver support" - depends on USB help Say Y here if you want to connect a Cypress CY7C63xxx micro controller to your computer's USB port. Currently this @@ -113,7 +103,6 @@ config USB_CYPRESS_CY7C63 config USB_CYTHERM tristate "Cypress USB thermometer driver support" - depends on USB help Say Y here if you want to connect a Cypress USB thermometer device to your computer's USB port. This device is also known @@ -126,7 +115,6 @@ config USB_CYTHERM config USB_IDMOUSE tristate "Siemens ID USB Mouse Fingerprint sensor support" - depends on USB help Say Y here if you want to use the fingerprint sensor on the Siemens ID Mouse. There is also a Siemens ID Mouse @@ -140,7 +128,6 @@ config USB_IDMOUSE config USB_FTDI_ELAN tristate "Elan PCMCIA CardBus Adapter USB Client" - depends on USB default M help ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. @@ -164,7 +151,6 @@ config USB_FTDI_ELAN config USB_APPLEDISPLAY tristate "Apple Cinema Display support" - depends on USB select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE help @@ -175,7 +161,6 @@ source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD tristate "USB LD driver" - depends on USB help This driver is for generic USB devices that use interrupt transfers, like LD Didactic's USB devices. @@ -185,7 +170,6 @@ config USB_LD config USB_TRANCEVIBRATOR tristate "PlayStation 2 Trance Vibrator driver support" - depends on USB help Say Y here if you want to connect a PlayStation 2 Trance Vibrator device to your computer's USB port. @@ -195,7 +179,6 @@ config USB_TRANCEVIBRATOR config USB_IOWARRIOR tristate "IO Warrior driver support" - depends on USB help Say Y here if you want to support the IO Warrior devices from Code Mercenaries. This includes support for the following devices: @@ -209,7 +192,6 @@ config USB_IOWARRIOR config USB_TEST tristate "USB testing driver" - depends on USB help This driver is for testing host controller software. It is used with specialized device firmware for regression and stress testing, @@ -220,7 +202,6 @@ config USB_TEST config USB_ISIGHTFW tristate "iSight firmware loading support" - depends on USB select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing @@ -233,7 +214,6 @@ config USB_ISIGHTFW config USB_YUREX tristate "USB YUREX driver support" - depends on USB help Say Y here if you want to connect a YUREX to your computer's USB port. The YUREX is a leg-shakes sensor. See @@ -246,7 +226,6 @@ config USB_YUREX config USB_EZUSB_FX2 tristate "Functions for loading firmware on EZUSB chips" - depends on USB help Say Y here if you need EZUSB device support. (Cypress FX/FX2/FX2LP microcontrollers) diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index 30ea7ca..0d03a52 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -1,7 +1,7 @@ config USB_SISUSBVGA tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" - depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD) + depends on (USB_MUSB_HDRC || USB_EHCI_HCD) ---help--- Say Y here if you intend to attach a USB2VGA dongle based on a Net2280 and a SiS315 chip. diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig index 635745f..5c6ffa2 100644 --- a/drivers/usb/mon/Kconfig +++ b/drivers/usb/mon/Kconfig @@ -4,7 +4,6 @@ config USB_MON tristate "USB Monitor" - depends on USB help If you select this option, a component which captures the USB traffic between peripheral-specific drivers and HC drivers will be built. diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 05e5143..4636ab9 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -6,7 +6,7 @@ # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' - depends on USB && USB_GADGET + depends on USB_GADGET select USB_OTG_UTILS help Say Y here if your system has a dual role high speed USB diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 29feb00..019bf7e 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -4,7 +4,7 @@ config USB_RENESAS_USBHS tristate 'Renesas USBHS controller' - depends on USB && USB_GADGET && GENERIC_HARDIRQS + depends on USB_GADGET && GENERIC_HARDIRQS default n help Renesas USBHS is a discrete USB host and peripheral controller chip diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 17b7f9a..bf37336 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB && TTY + depends on TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index eab04a6..8470e1b 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -4,11 +4,10 @@ comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" comment "also be needed; see USB_STORAGE Help for more info" - depends on USB config USB_STORAGE tristate "USB Mass Storage support" - depends on USB && SCSI + depends on SCSI ---help--- Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB @@ -188,7 +187,7 @@ config USB_STORAGE_CYPRESS_ATACB config USB_STORAGE_ENE_UB6250 tristate "USB ENE card reader support" - depends on USB && SCSI + depends on SCSI depends on USB_STORAGE ---help--- Say Y here if you wish to control a ENE SD/MS Card reader. @@ -203,7 +202,7 @@ config USB_STORAGE_ENE_UB6250 config USB_UAS tristate "USB Attached SCSI" - depends on USB && SCSI && BROKEN + depends on SCSI && BROKEN help The USB Attached SCSI protocol is supported by some USB storage devices. It permits higher performance by supporting diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 8bf1976..0e17b96 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -3,7 +3,6 @@ # config USB_WUSB tristate "Enable Wireless USB extensions" - depends on USB depends on PCI depends on UWB select CRYPTO @@ -19,7 +18,6 @@ config USB_WUSB config USB_WUSB_CBAF tristate "Support WUSB Cable Based Association (CBA)" - depends on USB help Some WUSB devices support Cable Based Association. It's used to enable the secure communication between the host and the -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/