Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763078Ab3DDQUD (ORCPT ); Thu, 4 Apr 2013 12:20:03 -0400 Received: from mailout1.samsung.com ([203.254.224.24]:52300 "EHLO mailout1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1763041Ab3DDQT7 (ORCPT ); Thu, 4 Apr 2013 12:19:59 -0400 X-AuditID: cbfee61b-b7f076d0000034b6-ba-515da82d29ff From: Tomasz Figa To: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org, linux-samsung-soc@vger.kernel.org, kyungmin.park@samsung.com, lrg@ti.com, broonie@opensource.wolfsonmicro.com, m.szyprowski@samsung.com, kgene.kim@samsung.com, Tomasz Figa Subject: [PATCH 2/3] regulator: max8998: Use arrays for specifying voltages in platform data Date: Thu, 04 Apr 2013 18:19:22 +0200 Message-id: <1365092363-12763-3-git-send-email-t.figa@samsung.com> X-Mailer: git-send-email 1.7.10 In-reply-to: <1365092363-12763-1-git-send-email-t.figa@samsung.com> References: <1365092363-12763-1-git-send-email-t.figa@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFprLLMWRmVeSWpSXmKPExsVy+t9jAV29FbGBBnsPsFj8m32KzeLA7Ies Fr0LrrJZnG16w25xedccNosZ5/cxWTRtn8BusfbIXXaL9TNeszhwepyfsZDR4+XE32wefVtW MXocv7GdyePzJrkA1igum5TUnMyy1CJ9uwSujP0L+pgLZjhUrHp8nLGBscO4i5GTQ0LAROLR jD5mCFtM4sK99WxdjFwcQgKLGCUeXXrKCuF0MUnMWNjCBFLFJqAm8bnhERuILSKgILG59xlY EbPAe0aJK09esoIkhAXiJI42LAWyOThYBFQlHjyRAgnzCjhJnDu7CWqbvMTT+31sICWcAs4S hyZrg4SFgEqefb7NOIGRdwEjwypG0dSC5ILipPRcI73ixNzi0rx0veT83E2M4EB7Jr2DcVWD xSFGAQ5GJR7ejL7YQCHWxLLiytxDjBIczEoivEdbgEK8KYmVValF+fFFpTmpxYcYpTlYlMR5 D7ZaBwoJpCeWpGanphakFsFkmTg4pRoYJ/E6Z/VpHUr9HbXcfzm/Ra7I92DHTO8Jr/XKvP3n bRPVlG999C1181114RkhO71SJx4+kH02slZEuSvfYqHwJP7tnaxTd/9q2LwpTNdPOCU85/KH olyPjiCz37sPnSrj+R+vuueg4L35fxTvaHzs6Th1Q31i4tpPt09fd2Jvzwz/8LhgmkK6Ektx RqKhFnNRcSIAwnfbpDACAAA= Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8225 Lines: 241 This patch modifies the platform data of max8998 to use arrays for specifying predefined voltages of buck1 and buck2 instead of separate field for each voltage. This allows to simplify the code a bit and will help in adding support for Device Tree, which will be introduced in further patch. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park --- arch/arm/mach-exynos/mach-universal_c210.c | 8 +-- arch/arm/mach-s5pv210/mach-aquila.c | 8 +-- arch/arm/mach-s5pv210/mach-goni.c | 8 +-- drivers/regulator/max8998.c | 96 +++++++++--------------------- include/linux/mfd/max8998.h | 16 ++--- 5 files changed, 39 insertions(+), 97 deletions(-) diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 497fcb7..366abb3 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -540,15 +540,11 @@ static struct max8998_regulator_data lp3974_regulators[] = { static struct max8998_platform_data universal_lp3974_pdata = { .num_regulators = ARRAY_SIZE(lp3974_regulators), .regulators = lp3974_regulators, - .buck1_voltage1 = 1100000, /* INT */ - .buck1_voltage2 = 1000000, - .buck1_voltage3 = 1100000, - .buck1_voltage4 = 1000000, + .buck1_voltage = { 1100000, 1000000, 1100000, 1000000 }, .buck1_set1 = EXYNOS4_GPX0(5), .buck1_set2 = EXYNOS4_GPX0(6), - .buck2_voltage1 = 1200000, /* G3D */ - .buck2_voltage2 = 1100000, .buck1_default_idx = 0, + .buck2_voltage = { 1200000, 1100000 }, .buck2_set3 = EXYNOS4_GPE2(0), .buck2_default_idx = 0, .wakeup = true, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 11900a8..7e6c718 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -377,12 +377,8 @@ static struct max8998_platform_data aquila_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage1 = 1200000, - .buck1_voltage2 = 1200000, - .buck1_voltage3 = 1200000, - .buck1_voltage4 = 1200000, - .buck2_voltage1 = 1200000, - .buck2_voltage2 = 1200000, + .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, + .buck2_voltage = { 1200000, 1200000 }, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e373de4..2ae61d4 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -580,12 +580,8 @@ static struct max8998_platform_data goni_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_voltage1 = 1200000, - .buck1_voltage2 = 1200000, - .buck1_voltage3 = 1200000, - .buck1_voltage4 = 1200000, - .buck2_voltage1 = 1200000, - .buck2_voltage2 = 1200000, + .buck1_voltage = { 1200000, 1200000, 1200000, 1200000 }, + .buck2_voltage = { 1200000, 1200000 }, }; #endif diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index a57a1b1..8c45b93 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -630,6 +630,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) struct max8998_data *max8998; struct i2c_client *i2c; int i, ret, size; + unsigned int v; if (!pdata) { dev_err(pdev->dev.parent, "No platform init data supplied\n"); @@ -688,53 +689,21 @@ static int max8998_pmic_probe(struct platform_device *pdev) gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2"); gpio_direction_output(pdata->buck1_set2, (max8998->buck1_idx >> 1) & 0x1); - /* Set predefined value for BUCK1 register 1 */ - i = 0; - while (buck12_voltage_map_desc.min + - buck12_voltage_map_desc.step*i - < pdata->buck1_voltage1) - i++; - max8998->buck1_vol[0] = i; - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i); - if (ret) - goto err_out; - - /* Set predefined value for BUCK1 register 2 */ - i = 0; - while (buck12_voltage_map_desc.min + - buck12_voltage_map_desc.step*i - < pdata->buck1_voltage2) - i++; - - max8998->buck1_vol[1] = i; - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i); - if (ret) - goto err_out; - - /* Set predefined value for BUCK1 register 3 */ - i = 0; - while (buck12_voltage_map_desc.min + - buck12_voltage_map_desc.step*i - < pdata->buck1_voltage3) - i++; - - max8998->buck1_vol[2] = i; - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i); - if (ret) - goto err_out; - - /* Set predefined value for BUCK1 register 4 */ - i = 0; - while (buck12_voltage_map_desc.min + - buck12_voltage_map_desc.step*i - < pdata->buck1_voltage4) - i++; - - max8998->buck1_vol[3] = i; - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i); - if (ret) - goto err_out; + /* Set predefined values for BUCK1 registers */ + for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) { + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < pdata->buck1_voltage[v]) + i++; + + max8998->buck1_vol[v] = i; + ret = max8998_write_reg(i2c, + MAX8998_REG_BUCK1_VOLTAGE1 + v, i); + if (ret) + goto err_out; + } } if (gpio_is_valid(pdata->buck2_set3)) { @@ -750,27 +719,20 @@ static int max8998_pmic_probe(struct platform_device *pdev) gpio_direction_output(pdata->buck2_set3, max8998->buck2_idx & 0x1); - /* BUCK2 register 1 */ - i = 0; - while (buck12_voltage_map_desc.min + - buck12_voltage_map_desc.step*i - < pdata->buck2_voltage1) - i++; - max8998->buck2_vol[0] = i; - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i); - if (ret) - goto err_out; - - /* BUCK2 register 2 */ - i = 0; - while (buck12_voltage_map_desc.min + - buck12_voltage_map_desc.step*i - < pdata->buck2_voltage2) - i++; - max8998->buck2_vol[1] = i; - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i); - if (ret) - goto err_out; + /* Set predefined values for BUCK2 registers */ + for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) { + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < pdata->buck2_voltage[v]) + i++; + + max8998->buck2_vol[v] = i; + ret = max8998_write_reg(i2c, + MAX8998_REG_BUCK2_VOLTAGE1 + v, i); + if (ret) + goto err_out; + } } for (i = 0; i < pdata->num_regulators; i++) { diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index 9df60ba..e8b9ba7 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -72,12 +72,8 @@ struct max8998_regulator_data { * @buck_voltage_lock: Do NOT change the values of the following six * registers set by buck?_voltage?. The voltage of BUCK1/2 cannot * be other than the preset values. - * @buck1_voltage1: BUCK1 DVS mode 1 voltage register - * @buck1_voltage2: BUCK1 DVS mode 2 voltage register - * @buck1_voltage3: BUCK1 DVS mode 3 voltage register - * @buck1_voltage4: BUCK1 DVS mode 4 voltage register - * @buck2_voltage1: BUCK2 DVS mode 1 voltage register - * @buck2_voltage2: BUCK2 DVS mode 2 voltage register + * @buck1_voltage: BUCK1 DVS mode 1 voltage registers + * @buck2_voltage: BUCK2 DVS mode 2 voltage registers * @buck1_set1: BUCK1 gpio pin 1 to set output voltage * @buck1_set2: BUCK1 gpio pin 2 to set output voltage * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2 @@ -101,12 +97,8 @@ struct max8998_platform_data { int num_regulators; int ono; bool buck_voltage_lock; - int buck1_voltage1; - int buck1_voltage2; - int buck1_voltage3; - int buck1_voltage4; - int buck2_voltage1; - int buck2_voltage2; + int buck1_voltage[4]; + int buck2_voltage[2]; int buck1_set1; int buck1_set2; int buck1_default_idx; -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/