Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964970Ab3DHKE6 (ORCPT ); Mon, 8 Apr 2013 06:04:58 -0400 Received: from youngberry.canonical.com ([91.189.89.112]:42944 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935821Ab3DHJw3 (ORCPT ); Mon, 8 Apr 2013 05:52:29 -0400 From: Luis Henriques To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Joseph CHANG , "David S. Miller" , Luis Henriques Subject: [PATCH 074/102] DM9000B: driver initialization upgrade Date: Mon, 8 Apr 2013 10:50:29 +0100 Message-Id: <1365414657-29191-75-git-send-email-luis.henriques@canonical.com> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1365414657-29191-1-git-send-email-luis.henriques@canonical.com> References: <1365414657-29191-1-git-send-email-luis.henriques@canonical.com> X-Extended-Stable: 3.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8541 Lines: 312 3.5.7.10 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Joseph CHANG commit 6741f40d198c6a5feb23653a1efd4ca47f93d83d upstream. Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: Joseph CHANG Signed-off-by: David S. Miller Signed-off-by: Luis Henriques --- drivers/net/ethernet/davicom/dm9000.c | 214 +++++++++++++++++----------------- drivers/net/ethernet/davicom/dm9000.h | 11 +- 2 files changed, 120 insertions(+), 105 deletions(-) diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 36499d5..a9628b6 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count) tmp = readl(reg); } +/* + * Sleep, either by using msleep() or if we are suspending, then + * use mdelay() to sleep. + */ +static void dm9000_msleep(board_info_t *db, unsigned int ms) +{ + if (db->in_suspend) + mdelay(ms); + else + msleep(ms); +} + +/* Read a word from phyxcer */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned int reg_save; + int ret; + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Issue phyxcer read command */ + iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait read complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); + + dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); + return ret; +} + +/* Write a word to phyxcer */ +static void +dm9000_phy_write(struct net_device *dev, + int phyaddr_unused, int reg, int value) +{ + board_info_t *db = netdev_priv(dev); + unsigned long flags; + unsigned long reg_save; + + dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, value); + iow(db, DM9000_EPDRH, value >> 8); + + /* Issue phyxcer write command */ + iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait write complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + + spin_unlock_irqrestore(&db->lock, flags); + mutex_unlock(&db->addr_lock); +} + /* dm9000_set_io * * select the specified set of io routines to use with the @@ -794,6 +895,9 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */ + ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; /* if wol is needed, then always set NCR_WAKEEN otherwise we end @@ -1200,109 +1304,6 @@ dm9000_open(struct net_device *dev) return 0; } -/* - * Sleep, either by using msleep() or if we are suspending, then - * use mdelay() to sleep. - */ -static void dm9000_msleep(board_info_t *db, unsigned int ms) -{ - if (db->in_suspend) - mdelay(ms); - else - msleep(ms); -} - -/* - * Read a word from phyxcer - */ -static int -dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned int reg_save; - int ret; - - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - dm9000_msleep(db, 1); /* Wait read complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ - - /* The read data keeps on REG_0D & REG_0E */ - ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock,flags); - - mutex_unlock(&db->addr_lock); - - dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); - return ret; -} - -/* - * Write a word to phyxcer - */ -static void -dm9000_phy_write(struct net_device *dev, - int phyaddr_unused, int reg, int value) -{ - board_info_t *db = netdev_priv(dev); - unsigned long flags; - unsigned long reg_save; - - dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); - mutex_lock(&db->addr_lock); - - spin_lock_irqsave(&db->lock,flags); - - /* Save previous register address */ - reg_save = readb(db->io_addr); - - /* Fill the phyxcer register into REG_0C */ - iow(db, DM9000_EPAR, DM9000_PHY | reg); - - /* Fill the written data into REG_0D & REG_0E */ - iow(db, DM9000_EPDRL, value); - iow(db, DM9000_EPDRH, value >> 8); - - iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */ - - writeb(reg_save, db->io_addr); - spin_unlock_irqrestore(&db->lock, flags); - - dm9000_msleep(db, 1); /* Wait write complete */ - - spin_lock_irqsave(&db->lock,flags); - reg_save = readb(db->io_addr); - - iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - - /* restore the previous address */ - writeb(reg_save, db->io_addr); - - spin_unlock_irqrestore(&db->lock, flags); - mutex_unlock(&db->addr_lock); -} - static void dm9000_shutdown(struct net_device *dev) { @@ -1501,7 +1502,12 @@ dm9000_probe(struct platform_device *pdev) db->flags |= DM9000_PLATF_SIMPLE_PHY; #endif - dm9000_reset(db); + /* Fixing bug on dm9000_probe, takeover dm9000_reset(db), + * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo + * while probe stage. + */ + + iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST); /* try multiple times, DM9000 sometimes gets the read wrong */ for (i = 0; i < 8; i++) { diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h index 55688bd..9ce058a 100644 --- a/drivers/net/ethernet/davicom/dm9000.h +++ b/drivers/net/ethernet/davicom/dm9000.h @@ -69,7 +69,9 @@ #define NCR_WAKEEN (1<<6) #define NCR_FCOL (1<<4) #define NCR_FDX (1<<3) -#define NCR_LBK (3<<1) + +#define NCR_RESERVED (3<<1) +#define NCR_MAC_LBK (1<<1) #define NCR_RST (1<<0) #define NSR_SPEED (1<<7) @@ -167,5 +169,12 @@ #define ISR_LNKCHNG (1<<5) #define ISR_UNDERRUN (1<<4) +/* Davicom MII registers. + */ + +#define MII_DM_DSPCR 0x1b /* DSP Control Register */ + +#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */ + #endif /* _DM9000X_H_ */ -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/