Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S937232Ab3DJK4W (ORCPT ); Wed, 10 Apr 2013 06:56:22 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:34471 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758441Ab3DJK4U (ORCPT ); Wed, 10 Apr 2013 06:56:20 -0400 Message-ID: <5165453E.6090503@ti.com> Date: Wed, 10 Apr 2013 13:55:58 +0300 From: Roger Quadros User-Agent: Mozilla/5.0 (X11; Linux i686; rv:16.0) Gecko/20121011 Thunderbird/16.0.1 MIME-Version: 1.0 To: Mike Turquette CC: Nishanth Menon , Tony Lindgren , , , , , , , , Subject: Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs References: <1363703220-4777-1-git-send-email-rogerq@ti.com> <20130403234242.GE10155@atomide.com> <515D2D30.3000306@ti.com> <20130404164137.GH10155@atomide.com> <515EA9E3.1010409@ti.com> <20130405155851.GA10155@atomide.com> <5163E589.1040809@ti.com> <20130409164928.GL10155@atomide.com> <20130409174319.GP10155@atomide.com> <20130409204900.GA8815@kahuna> <20130410080630.14359.68178@quantum> In-Reply-To: <20130410080630.14359.68178@quantum> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13484 Lines: 365 On 04/10/2013 11:06 AM, Mike Turquette wrote: > Quoting Nishanth Menon (2013-04-09 13:49:00) >> On 10:43-20130409, Tony Lindgren wrote: >>> * Tony Lindgren [130409 09:54]: >>>> * Roger Quadros [130409 03:00]: >>>>> On 04/05/2013 06:58 PM, Tony Lindgren wrote: >>>>>> >>>>>> Can't you just use the clock name there to get it? >>>>> >>>>> In device tree we don't pass around clock names. You can either get >>>>> a phandle or an index to the clock. >>>>> >>>>> e.g. Documentation/devicetree/bindings/clock/imx31-clock.txt >>>> >>>> Yes I understand that. But the driver/clock/omap driver can just >>>> remap the DT device initially so the board specific clock is >>>> found from the clock alias table. Basically initially a passthrough >>>> driver that can be enhanced to parse DT clock bindings and load >>>> data from /lib/firmware. >>> >>> Actually probably the driver/clock/omap can even do even less >>> initially. There probably even no need to remap clocks there. >>> >>> As long as the DT clock driver understands that a board specific >>> auxclk is specified in the DT it can just call clk_add_alias() so >>> the driver will get the right auxclk from cclock44xx_data.c. >>> >>> Then other features can be added later on like to allocate a >>> clock entirely based on the binding etc. >> I did try to have an implementation for cpufreq using clock nodes. >> unfortunately, device tree wont let me have arguments of strings :( >> So, I am unable to do clock = <&clk mpu_dpll>; >> instead, I am forced to do clock = <&clk 249>; >> > > See http://article.gmane.org/gmane.linux.ports.arm.kernel/229034 > Awesome. Thanks for pointing this out Mike. Now all we need to do is create a named define for each clock index in the header file. cheers, -roger > >> Here is an attempt on beagleXM - adds every clock node to the list. >> Tons of un-necessary prints added to give an idea - see log: >> http://pastebin.com/F9A2zSTr >> >> Would an cleaned up version be good enough as a step #1 of transition? >> >> From 7d373bdb9e9549c1b6ba1775a8dfd96ebe78abfb Mon Sep 17 00:00:00 2001 >> From: Nishanth Menon >> Date: Tue, 26 Mar 2013 10:23:27 +0000 >> Subject: [PATCH] OMAP: add devicetree support for clock nodes. >> >> Dummy patch based on Roger's original idea >> >> Nyet-Signed-off-by: Nishanth Menon >> --- >> arch/arm/boot/dts/omap3.dtsi | 5 ++ >> arch/arm/boot/dts/omap34xx.dtsi | 2 + >> arch/arm/mach-omap2/cclock3xxx_data.c | 3 +- >> arch/arm/mach-omap2/cclock44xx_data.c | 3 +- >> arch/arm/mach-omap2/pm.c | 11 +++- >> drivers/clk/Kconfig | 6 ++ >> drivers/clk/Makefile | 2 + >> drivers/clk/ti.c | 100 +++++++++++++++++++++++++++++++++ >> include/linux/clk/ti.h | 30 ++++++++++ >> 9 files changed, 157 insertions(+), 5 deletions(-) >> create mode 100644 drivers/clk/ti.c >> create mode 100644 include/linux/clk/ti.h >> >> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi >> index 3344f05..a08990d 100644 >> --- a/arch/arm/boot/dts/omap3.dtsi >> +++ b/arch/arm/boot/dts/omap3.dtsi >> @@ -73,6 +73,11 @@ >> ti,hwmods = "counter_32k"; >> }; >> >> + clks: clocks { >> + compatible = "ti,clock"; >> + #clock-cells = <1>; >> + }; >> + >> intc: interrupt-controller@48200000 { >> compatible = "ti,omap2-intc"; >> interrupt-controller; >> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi >> index 75ed4ae..93c2621 100644 >> --- a/arch/arm/boot/dts/omap34xx.dtsi >> +++ b/arch/arm/boot/dts/omap34xx.dtsi >> @@ -23,6 +23,8 @@ >> 600000 1350000 >> >; >> clock-latency = <300000>; /* From legacy driver */ >> + clocks = <&clks 249>; /* index to cpufreq_ck */ >> + clock-names = "cpu"; >> }; >> }; >> }; >> diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c >> index 4579c3c..d5d5ef5 100644 >> --- a/arch/arm/mach-omap2/cclock3xxx_data.c >> +++ b/arch/arm/mach-omap2/cclock3xxx_data.c >> @@ -22,6 +22,7 @@ >> #include >> #include >> #include >> +#include >> >> #include "soc.h" >> #include "iomap.h" >> @@ -3574,7 +3575,7 @@ int __init omap3xxx_clk_init(void) >> for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); >> c++) >> if (c->cpu & cpu_clkflg) { >> - clkdev_add(&c->lk); >> + ti_clk_node_add(&c->lk); >> if (!__clk_init(NULL, c->lk.clk)) >> omap2_init_clk_hw_omap_clocks(c->lk.clk); >> } >> diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c >> index 0c6834a..338ef64 100644 >> --- a/arch/arm/mach-omap2/cclock44xx_data.c >> +++ b/arch/arm/mach-omap2/cclock44xx_data.c >> @@ -27,6 +27,7 @@ >> #include >> #include >> #include >> +#include >> >> #include "soc.h" >> #include "iomap.h" >> @@ -1697,7 +1698,7 @@ int __init omap4xxx_clk_init(void) >> for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); >> c++) { >> if (c->cpu & cpu_clkflg) { >> - clkdev_add(&c->lk); >> + ti_clk_node_add(&c->lk); >> if (!__clk_init(NULL, c->lk.clk)) >> omap2_init_clk_hw_omap_clocks(c->lk.clk); >> } >> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c >> index 8d15f9a..6cf95160 100644 >> --- a/arch/arm/mach-omap2/pm.c >> +++ b/arch/arm/mach-omap2/pm.c >> @@ -267,7 +267,12 @@ static void __init omap4_init_voltages(void) >> >> static inline void omap_init_cpufreq(void) >> { >> - struct platform_device_info devinfo = { .name = "omap-cpufreq", }; >> + struct platform_device_info devinfo = { }; >> + >> + if (!of_have_populated_dt()) >> + devinfo.name = "omap-cpufreq"; >> + else >> + devinfo.name = "cpufreq-cpu0"; >> platform_device_register_full(&devinfo); >> } >> >> @@ -301,9 +306,9 @@ int __init omap2_common_pm_late_init(void) >> /* Smartreflex device init */ >> omap_devinit_smartreflex(); >> >> - /* cpufreq dummy device instantiation */ >> - omap_init_cpufreq(); >> } >> + /* cpufreq dummy device instantiation */ >> + omap_init_cpufreq(); >> >> #ifdef CONFIG_SUSPEND >> suspend_set_ops(&omap_pm_ops); >> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig >> index a47e6ee..03c6e48 100644 >> --- a/drivers/clk/Kconfig >> +++ b/drivers/clk/Kconfig >> @@ -55,6 +55,12 @@ config COMMON_CLK_MAX77686 >> ---help--- >> This driver supports Maxim 77686 crystal oscillator clock. >> >> +config COMMON_CLK_TI >> + tristate "Clock driver for TI SoCs" >> + depends on ARCH_OMAP && OF >> + ---help--- >> + Fill me up.. some generic statement ofcourse (lets start with OMAP) >> + >> config CLK_TWL6040 >> tristate "External McPDM functional clock from twl6040" >> depends on TWL6040_CORE >> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile >> index 300d477..9621815 100644 >> --- a/drivers/clk/Makefile >> +++ b/drivers/clk/Makefile >> @@ -30,6 +30,8 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ >> >> obj-$(CONFIG_X86) += x86/ >> >> +obj-$(CONFIG_COMMON_CLK_TI) += ti.o >> + >> # Chip specific >> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o >> obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o >> diff --git a/drivers/clk/ti.c b/drivers/clk/ti.c >> new file mode 100644 >> index 0000000..c747381 >> --- /dev/null >> +++ b/drivers/clk/ti.c >> @@ -0,0 +1,100 @@ >> +/* >> + * TI Clock node provider >> + * >> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ >> + * Nishanth Menon >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any >> + * kind, whether express or implied; without even the implied warranty >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +struct ti_clk { >> + struct clk_lookup *lk; >> + struct list_head node; >> +}; >> + >> +static LIST_HEAD(ti_clk_list); >> + >> +static struct clk *ti_bypass_clk_get_by_name(struct of_phandle_args *clkspec, >> + void *data) >> +{ >> + struct ti_clk *c; >> +#if 0 >> + /* Eww.. IF ONLY phandle arguments could be string */ >> + char clk_name[32]; /* 32 is max size of property name */ >> + >> + char *name = clkspec->args[0]; >> + >> + snprintf(clk_name, 32, "%s_ck", name); >> + list_for_each_entry(c, &ti_clk_list, node) { >> + int r = strncmp(c->lk->conn_id, clk_name, 32); >> + pr_err("%s: searching %s in %s - %d\n", >> + __func__, clk_name, c->lk->con_id, r); >> + if (!r) { >> + pr_err("%s: found it!\n", __func__); >> + return c->lk.clk; >> + } >> + } >> +#else >> + /* Use integer indexing into clkdev list! Sigh.. */ >> + int idx = clkspec->args[0]; >> + int cindex = 1; >> + >> + list_for_each_entry(c, &ti_clk_list, node) { >> + int r = (idx == cindex) ? 0 : 1; >> + pr_err("%s: searching index search = %d in %d in %s - %d\n", >> + __func__, idx, cindex, c->lk->con_id, r); >> + if (!r) { >> + pr_err("%s: found it!\n", __func__); >> + return c->lk->clk; >> + } >> + cindex++; >> + } >> +#endif >> + >> + pr_err("%s: ran out of options\n", __func__); >> + return ERR_PTR(-ENODEV); >> +} >> + >> +static void __init ti_clock_init(struct device_node *node) >> +{ >> + >> + pr_err("%s: START\n", __func__); >> + of_clk_add_provider(node, ti_bypass_clk_get_by_name, NULL); >> + pr_err("%s: END\n", __func__); >> +} >> +CLK_OF_DECLARE(ti_clk, "ti,clock", ti_clock_init); >> + >> +void __init ti_clk_node_add(struct clk_lookup *lk) >> +{ >> + struct ti_clk *c; >> + static bool of_added; >> + >> + c = kzalloc(sizeof(struct ti_clk), GFP_KERNEL); >> + if (!c) { >> + pr_err("%s: No memory!! cannot add clk node!\n", __func__); >> + return; >> + } >> + clkdev_add(lk); >> + c->lk = lk; >> + list_add_tail(&c->node, &ti_clk_list); >> + pr_err("%s: Added clock node %s\n", __func__, lk->con_id); >> + if (!of_added) { >> + of_clk_init(NULL); >> + of_added = true; >> + } >> +}; >> + >> diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h >> new file mode 100644 >> index 0000000..eb502a8 >> --- /dev/null >> +++ b/include/linux/clk/ti.h >> @@ -0,0 +1,30 @@ >> +/* >> + * TI Clock node provider header >> + * >> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ >> + * Nishanth Menon >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any >> + * kind, whether express or implied; without even the implied warranty >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> +#ifndef __TI_CLK_H >> +#define __TI_CLK_H >> + >> +#include >> + >> +#ifdef CONFIG_OF >> +extern void ti_clk_node_add(struct clk_lookup *lk); >> +#else >> +static inline void ti_clk_node_add(struct clk_lookup *lk) >> +{ >> + clkdev_add(lk); >> +} >> +#endif /* CONFIG_OF */ >> + >> +#endif /* __TI_CLK_H */ >> -- >> 1.7.9.5 >> >> >> -- >> Regards, >> Nishanth Menon >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/