Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935995Ab3DKRby (ORCPT ); Thu, 11 Apr 2013 13:31:54 -0400 Received: from arrakis.dune.hu ([78.24.191.176]:39464 "EHLO arrakis.dune.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S935364Ab3DKRbw (ORCPT ); Thu, 11 Apr 2013 13:31:52 -0400 Message-ID: <5166F39C.1050907@openwrt.org> Date: Thu, 11 Apr 2013 19:32:12 +0200 From: Gabor Juhos MIME-Version: 1.0 To: Bjorn Helgaas CC: Benjamin Herrenschmidt , Ralf Baechle , "linux-pci@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-mips@linux-mips.org" Subject: Re: [PATCH 2/2] MIPS: implement pcibios_get_phb_of_node References: <1365098483-26821-1-git-send-email-juhosg@openwrt.org> <1365098483-26821-2-git-send-email-juhosg@openwrt.org> In-Reply-To: X-Enigmail-Version: 1.5.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2718 Lines: 65 2013.04.10. 18:31 keltez?ssel, Bjorn Helgaas ?rta: > On Thu, Apr 4, 2013 at 12:01 PM, Gabor Juhos wrote: >> The of_node field of the device assigned to a >> PCI bus is used during scanning of the PCI bus. >> However on MIPS, the of_node field is assigned >> only after the bus has been scanned. >> >> Implement the architecture specific version of >> 'pcibios_get_phb_of_node'. Which ensures that the >> PCI driver core will initialize the of_node field >> before starting the scan. >> >> Also remove the local assignment of bus->dev.of_node, >> it is not needed after the patch. >> >> Signed-off-by: Gabor Juhos > > I removed the __weak annotation from include/linux/pci.h and applied > this patch to my pci/gabor-get-of-node. Thank you! > Give it a try and make sure > it solves your problem. If so, and Ralph approves, I can push both > for v3.10. It should appear at > http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/gabor-get-of-node > soon. I have tried your patch on top of 3.9-rc6. The resulting kernel uses the architecture specific implementation, and it runs fine. $ mipsel-openwrt-linux-readelf -s arch/mips/pci/built-in.o \ drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node 93: 0000046c 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node 1433: 00012a2c 104 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node 31863: 001d4dbc 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node $ For completeness, I have compiled it for X64 and for powerpc as well. I did not try to run these kernels, but the output of readelf seems to be ok: $ readelf -s arch/x86/kernel/built-in.o drivers/pci/built-in.o vmlinux.o | \ grep pcibios_get_phb_of_node 2761: 000273a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node 1705: 00018770 77 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node 60364: 000278a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node $ $ powerpc-openwrt-linux-readelf -s arch/powerpc/kernel/built-in.o \ drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node 1002: 0000ca28 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node 1485: 0001453c 88 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node 28959: 0000d598 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node $ > Or if you prefer, you can take them through the MIPS tree. Either is fine. -Gabor -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/