Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756821Ab3DLMmY (ORCPT ); Fri, 12 Apr 2013 08:42:24 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:35132 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754078Ab3DLMmX (ORCPT ); Fri, 12 Apr 2013 08:42:23 -0400 Message-ID: <5168011C.30306@ti.com> Date: Fri, 12 Apr 2013 08:42:04 -0400 From: Eduardo Valentin User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130308 Thunderbird/17.0.4 MIME-Version: 1.0 To: amit daniel kachhap CC: Eduardo Valentin , , Thomas Abraham , Zhang Rui , , , Kukjin Kim Subject: Re: [4/9] thermal: exynos: Bifurcate exynos thermal common and tmu controller code References: <1364297642-2746-5-git-send-email-amit.daniel@samsung.com> <51672052.2060908@ti.com> In-Reply-To: Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 70275 Lines: 1882 On 12-04-2013 07:09, amit daniel kachhap wrote: > On Fri, Apr 12, 2013 at 2:12 AM, Eduardo Valentin > wrote: >> Amit, >> >> On 26-03-2013 07:33, Amit Daniel Kachhap wrote: >>> >>> This code bifurcates exynos thermal implementation into common and sensor >>> specific parts as it will simplify adding support for new temperature >>> sensors. The file is named as exynos4210 because it was original SOC for >>> which this driver was developed and then later SOC's(5250, 4412) were >>> added >>> into it. This change is needed to add different TMU sensor for future >>> exynos5 >>> SOC. >>> >>> Signed-off-by: Amit Daniel Kachhap >>> >>> --- >>> drivers/thermal/samsung/Kconfig | 24 +- >>> drivers/thermal/samsung/Makefile | 4 +- >>> drivers/thermal/samsung/exynos4210_thermal.c | 658 ++++++++++++++++ >>> drivers/thermal/samsung/exynos_common.c | 421 ++++++++++ >>> drivers/thermal/samsung/exynos_common.h | 73 ++ >>> drivers/thermal/samsung/exynos_thermal.c | 1093 >>> -------------------------- >>> 6 files changed, 1172 insertions(+), 1101 deletions(-) >>> create mode 100644 drivers/thermal/samsung/exynos4210_thermal.c >>> create mode 100644 drivers/thermal/samsung/exynos_common.c >>> create mode 100644 drivers/thermal/samsung/exynos_common.h >>> delete mode 100644 drivers/thermal/samsung/exynos_thermal.c >>> >>> diff --git a/drivers/thermal/samsung/Kconfig >>> b/drivers/thermal/samsung/Kconfig >>> index 5737b85..cefe693 100644 >>> --- a/drivers/thermal/samsung/Kconfig >>> +++ b/drivers/thermal/samsung/Kconfig >>> @@ -1,11 +1,23 @@ >>> >>> -config EXYNOS_THERMAL >>> - tristate "Temperature sensor on Samsung EXYNOS" >>> +config EXYNOS_COMMON >>> + tristate "Common thermal support for EXYNOS SOC's" >>> depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) >>> + help >>> + If you say yes here you get support for EXYNOS TMU >>> + (Thermal Management Unit) common registration/unregistration >>> + functions to the core thermal layer and also to use the generic >>> + cpu cooling API's. >>> + >>> +if EXYNOS_COMMON >>> + >>> +config EXYNOS4210_THERMAL >>> + tristate "Temperature sensor on Samsung EXYNOS series SOC" >>> + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || >>> SOC_EXYNOS5250) >>> depends on CPU_THERMAL >>> help >>> - If you say yes here you get support for TMU (Thermal Management >>> - Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering >>> - the exynos thermal driver with the core thermal layer and cpu >>> - cooling API's. >>> + If you say yes here you can enable TMU (Thermal Management Unit) >>> on >>> + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This >>> option >>> + initialises the TMU controller and registers/unregisters with >>> exynos >>> + common thermal layer. >>> >>> +endif >>> diff --git a/drivers/thermal/samsung/Makefile >>> b/drivers/thermal/samsung/Makefile >>> index fa55df5..d51d0c2 100644 >>> --- a/drivers/thermal/samsung/Makefile >>> +++ b/drivers/thermal/samsung/Makefile >>> @@ -1,5 +1,5 @@ >>> # >>> # Samsung thermal specific Makefile >>> # >>> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o >>> - >>> +obj-$(CONFIG_EXYNOS_COMMON) += exynos_common.o >>> +obj-$(CONFIG_EXYNOS4210_THERMAL) += exynos4210_thermal.o >> >> >> Are you sure you want separated modules? >> >> If yes you have to review this patch and export the symbols from common to >> exynos4210. Saying that because it generates a compilation error: >> ERROR: "exynos_report_trigger" >> [drivers/thermal/samsung/exynos4210_thermal.ko] undefined! >> ERROR: "exynos_register_thermal" >> [drivers/thermal/samsung/exynos4210_thermal.ko] undefined! >> ERROR: "exynos_unregister_thermal" >> [drivers/thermal/samsung/exynos4210_thermal.ko] undefined! >> >> If you want separate modules, you have to EXPORT_SYMBOL those. > Ok. looks like I missed this test. >> >> You can also do what I have done for TI SoC thermal (check linux-next >> drivers/staging/ti-soc-thermal/Makefile) > ok sure. That was obviously a suggestion. In my case I chose to have 1 single module (ti-soc-thermal.ko) that will contain the thermal support for all TI SoC chips. If you want to follow that design then, take that file as an example. If not, then you need to fix the above export errors. > > Thanks, > Amit D >>> >>> diff --git a/drivers/thermal/samsung/exynos4210_thermal.c >>> b/drivers/thermal/samsung/exynos4210_thermal.c >>> new file mode 100644 >>> index 0000000..09ea8c8 >>> --- /dev/null >>> +++ b/drivers/thermal/samsung/exynos4210_thermal.c >>> @@ -0,0 +1,658 @@ >>> +/* >>> + * exynos4210_thermal.c - Samsung EXYNOS 4210, 4412, 5250 TMU >>> + * (Thermal Management Unit) >>> + * >>> + * Copyright (C) 2011 Samsung Electronics >>> + * Donggeun Kim >>> + * Amit Daniel Kachhap >>> + * Amit Daniel Kachhap >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License as published by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU General Public License >>> + * along with this program; if not, write to the Free Software >>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 >>> USA >>> + * >>> + */ >>> + >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include "exynos_common.h" >>> + >>> +/* Exynos generic registers */ >>> +#define EXYNOS_TMU_REG_TRIMINFO 0x0 >>> +#define EXYNOS_TMU_REG_CONTROL 0x20 >>> +#define EXYNOS_TMU_REG_STATUS 0x28 >>> +#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 >>> +#define EXYNOS_TMU_REG_INTEN 0x70 >>> +#define EXYNOS_TMU_REG_INTSTAT 0x74 >>> +#define EXYNOS_TMU_REG_INTCLEAR 0x78 >>> + >>> +#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff >>> +#define EXYNOS_TMU_GAIN_SHIFT 8 >>> +#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 >>> +#define EXYNOS_TMU_CORE_ON 3 >>> +#define EXYNOS_TMU_CORE_OFF 2 >>> +#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 >>> + >>> +/* Exynos4210 specific registers */ >>> +#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 >>> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 >>> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 >>> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 >>> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C >>> +#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 >>> +#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 >>> +#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 >>> +#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C >>> + >>> +#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 >>> +#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 >>> +#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 >>> +#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 >>> +#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 >>> + >>> +/* Exynos5250 and Exynos4412 specific registers */ >>> +#define EXYNOS_TMU_TRIMINFO_CON 0x14 >>> +#define EXYNOS_THD_TEMP_RISE 0x50 >>> +#define EXYNOS_THD_TEMP_FALL 0x54 >>> +#define EXYNOS_EMUL_CON 0x80 >>> + >>> +#define EXYNOS_TRIMINFO_RELOAD 0x1 >>> +#define EXYNOS_TMU_CLEAR_RISE_INT 0x111 >>> +#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) >>> +#define EXYNOS_MUX_ADDR_VALUE 6 >>> +#define EXYNOS_MUX_ADDR_SHIFT 20 >>> +#define EXYNOS_TMU_TRIP_MODE_SHIFT 13 >>> + >>> +#define EFUSE_MIN_VALUE 40 >>> +#define EFUSE_MAX_VALUE 100 >>> + >>> +#ifdef CONFIG_THERMAL_EMULATION >>> +#define EXYNOS_EMUL_TIME 0x57F0 >>> +#define EXYNOS_EMUL_TIME_SHIFT 16 >>> +#define EXYNOS_EMUL_DATA_SHIFT 8 >>> +#define EXYNOS_EMUL_DATA_MASK 0xFF >>> +#define EXYNOS_EMUL_ENABLE 0x1 >>> +#endif /* CONFIG_THERMAL_EMULATION */ >>> + >>> +struct exynos_tmu_data { >>> + struct exynos_tmu_platform_data *pdata; >>> + struct resource *mem; >>> + void __iomem *base; >>> + int irq; >>> + enum soc_type soc; >>> + struct work_struct irq_work; >>> + struct mutex lock; >>> + struct clk *clk; >>> + u8 temp_error1, temp_error2; >>> +}; >>> + >>> +/* >>> + * TMU treats temperature as a mapped temperature code. >>> + * The temperature is converted differently depending on the calibration >>> type. >>> + */ >>> +static int temp_to_code(struct exynos_tmu_data *data, u8 temp) >>> +{ >>> + struct exynos_tmu_platform_data *pdata = data->pdata; >>> + int temp_code; >>> + >>> + if (data->soc == SOC_ARCH_EXYNOS4210) >>> + /* temp should range between 25 and 125 */ >>> + if (temp < 25 || temp > 125) { >>> + temp_code = -EINVAL; >>> + goto out; >>> + } >>> + >>> + switch (pdata->cal_type) { >>> + case TYPE_TWO_POINT_TRIMMING: >>> + temp_code = (temp - 25) * >>> + (data->temp_error2 - data->temp_error1) / >>> + (85 - 25) + data->temp_error1; >>> + break; >>> + case TYPE_ONE_POINT_TRIMMING: >>> + temp_code = temp + data->temp_error1 - 25; >>> + break; >>> + default: >>> + temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET; >>> + break; >>> + } >>> +out: >>> + return temp_code; >>> +} >>> + >>> +/* >>> + * Calculate a temperature value from a temperature code. >>> + * The unit of the temperature is degree Celsius. >>> + */ >>> +static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) >>> +{ >>> + struct exynos_tmu_platform_data *pdata = data->pdata; >>> + int temp; >>> + >>> + if (data->soc == SOC_ARCH_EXYNOS4210) >>> + /* temp_code should range between 75 and 175 */ >>> + if (temp_code < 75 || temp_code > 175) { >>> + temp = -ENODATA; >>> + goto out; >>> + } >>> + >>> + switch (pdata->cal_type) { >>> + case TYPE_TWO_POINT_TRIMMING: >>> + temp = (temp_code - data->temp_error1) * (85 - 25) / >>> + (data->temp_error2 - data->temp_error1) + 25; >>> + break; >>> + case TYPE_ONE_POINT_TRIMMING: >>> + temp = temp_code - data->temp_error1 + 25; >>> + break; >>> + default: >>> + temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET; >>> + break; >>> + } >>> +out: >>> + return temp; >>> +} >>> + >>> +static int exynos_tmu_initialize(struct platform_device *pdev) >>> +{ >>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev); >>> + struct exynos_tmu_platform_data *pdata = data->pdata; >>> + unsigned int status, trim_info; >>> + unsigned int rising_threshold = 0, falling_threshold = 0; >>> + int ret = 0, threshold_code, i, trigger_levs = 0; >>> + >>> + mutex_lock(&data->lock); >>> + clk_enable(data->clk); >>> + >>> + status = readb(data->base + EXYNOS_TMU_REG_STATUS); >>> + if (!status) { >>> + ret = -EBUSY; >>> + goto out; >>> + } >>> + >>> + if (data->soc == SOC_ARCH_EXYNOS) { >>> + __raw_writel(EXYNOS_TRIMINFO_RELOAD, >>> + data->base + EXYNOS_TMU_TRIMINFO_CON); >>> + } >>> + /* Save trimming info in order to perform calibration */ >>> + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); >>> + data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK; >>> + data->temp_error2 = ((trim_info >> 8) & >>> EXYNOS_TMU_TRIM_TEMP_MASK); >>> + >>> + if ((EFUSE_MIN_VALUE > data->temp_error1) || >>> + (data->temp_error1 > EFUSE_MAX_VALUE) || >>> + (data->temp_error2 != 0)) >>> + data->temp_error1 = pdata->efuse_value; >>> + >>> + /* Count trigger levels to be enabled */ >>> + for (i = 0; i < MAX_THRESHOLD_LEVS; i++) >>> + if (pdata->trigger_levels[i]) >>> + trigger_levs++; >>> + >>> + if (data->soc == SOC_ARCH_EXYNOS4210) { >>> + /* Write temperature code for threshold */ >>> + threshold_code = temp_to_code(data, pdata->threshold); >>> + if (threshold_code < 0) { >>> + ret = threshold_code; >>> + goto out; >>> + } >>> + writeb(threshold_code, >>> + data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); >>> + for (i = 0; i < trigger_levs; i++) >>> + writeb(pdata->trigger_levels[i], >>> + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * >>> 4); >>> + >>> + writel(EXYNOS4210_TMU_INTCLEAR_VAL, >>> + data->base + EXYNOS_TMU_REG_INTCLEAR); >>> + } else if (data->soc == SOC_ARCH_EXYNOS) { >>> + /* Write temperature code for rising and falling threshold >>> */ >>> + for (i = 0; i < trigger_levs; i++) { >>> + threshold_code = temp_to_code(data, >>> + pdata->trigger_levels[i]); >>> + if (threshold_code < 0) { >>> + ret = threshold_code; >>> + goto out; >>> + } >>> + rising_threshold |= threshold_code << 8 * i; >>> + if (pdata->threshold_falling) { >>> + threshold_code = temp_to_code(data, >>> + pdata->trigger_levels[i] - >>> + pdata->threshold_falling); >>> + if (threshold_code > 0) >>> + falling_threshold |= >>> + threshold_code << 8 * i; >>> + } >>> + } >>> + >>> + writel(rising_threshold, >>> + data->base + EXYNOS_THD_TEMP_RISE); >>> + writel(falling_threshold, >>> + data->base + EXYNOS_THD_TEMP_FALL); >>> + >>> + writel(EXYNOS_TMU_CLEAR_RISE_INT | >>> EXYNOS_TMU_CLEAR_FALL_INT, >>> + data->base + EXYNOS_TMU_REG_INTCLEAR); >>> + } >>> +out: >>> + clk_disable(data->clk); >>> + mutex_unlock(&data->lock); >>> + >>> + return ret; >>> +} >>> + >>> +static void exynos_tmu_control(struct platform_device *pdev, bool on) >>> +{ >>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev); >>> + struct exynos_tmu_platform_data *pdata = data->pdata; >>> + unsigned int con, interrupt_en; >>> + >>> + mutex_lock(&data->lock); >>> + clk_enable(data->clk); >>> + >>> + con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT | >>> + pdata->gain << EXYNOS_TMU_GAIN_SHIFT; >>> + >>> + if (data->soc == SOC_ARCH_EXYNOS) { >>> + con |= pdata->noise_cancel_mode << >>> EXYNOS_TMU_TRIP_MODE_SHIFT; >>> + con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT); >>> + } >>> + >>> + if (on) { >>> + con |= EXYNOS_TMU_CORE_ON; >>> + interrupt_en = pdata->trigger_level3_en << 12 | >>> + pdata->trigger_level2_en << 8 | >>> + pdata->trigger_level1_en << 4 | >>> + pdata->trigger_level0_en; >>> + if (pdata->threshold_falling) >>> + interrupt_en |= interrupt_en << 16; >>> + } else { >>> + con |= EXYNOS_TMU_CORE_OFF; >>> + interrupt_en = 0; /* Disable all interrupts */ >>> + } >>> + writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); >>> + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); >>> + >>> + clk_disable(data->clk); >>> + mutex_unlock(&data->lock); >>> +} >>> + >>> +static int exynos_tmu_read(struct exynos_tmu_data *data) >>> +{ >>> + u8 temp_code; >>> + int temp; >>> + >>> + mutex_lock(&data->lock); >>> + clk_enable(data->clk); >>> + >>> + temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); >>> + temp = code_to_temp(data, temp_code); >>> + >>> + clk_disable(data->clk); >>> + mutex_unlock(&data->lock); >>> + >>> + return temp; >>> +} >>> + >>> +#ifdef CONFIG_THERMAL_EMULATION >>> +static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) >>> +{ >>> + struct exynos_tmu_data *data = drv_data; >>> + unsigned int reg; >>> + int ret = -EINVAL; >>> + >>> + if (data->soc == SOC_ARCH_EXYNOS4210) >>> + goto out; >>> + >>> + if (temp && temp < MCELSIUS) >>> + goto out; >>> + >>> + mutex_lock(&data->lock); >>> + clk_enable(data->clk); >>> + >>> + reg = readl(data->base + EXYNOS_EMUL_CON); >>> + >>> + if (temp) { >>> + temp /= MCELSIUS; >>> + >>> + reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) | >>> + (temp_to_code(data, temp) >>> + << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE; >>> + } else { >>> + reg &= ~EXYNOS_EMUL_ENABLE; >>> + } >>> + >>> + writel(reg, data->base + EXYNOS_EMUL_CON); >>> + >>> + clk_disable(data->clk); >>> + mutex_unlock(&data->lock); >>> + return 0; >>> +out: >>> + return ret; >>> +} >>> +#else >>> +static int exynos_tmu_set_emulation(void *drv_data, unsigned long >>> temp) >>> + { return -EINVAL; } >>> +#endif/*CONFIG_THERMAL_EMULATION*/ >>> + >>> +static struct thermal_sensor_conf exynos_sensor_conf = { >>> + .name = "exynos-therm", >>> + .read_temperature = (int (*)(void *))exynos_tmu_read, >>> + .write_emul_temp = exynos_tmu_set_emulation, >>> +}; >>> + >>> +static void exynos_tmu_work(struct work_struct *work) >>> +{ >>> + struct exynos_tmu_data *data = container_of(work, >>> + struct exynos_tmu_data, irq_work); >>> + >>> + exynos_report_trigger(&exynos_sensor_conf); >>> + mutex_lock(&data->lock); >>> + clk_enable(data->clk); >>> + if (data->soc == SOC_ARCH_EXYNOS) >>> + writel(EXYNOS_TMU_CLEAR_RISE_INT | >>> + EXYNOS_TMU_CLEAR_FALL_INT, >>> + data->base + EXYNOS_TMU_REG_INTCLEAR); >>> + else >>> + writel(EXYNOS4210_TMU_INTCLEAR_VAL, >>> + data->base + EXYNOS_TMU_REG_INTCLEAR); >>> + clk_disable(data->clk); >>> + mutex_unlock(&data->lock); >>> + >>> + enable_irq(data->irq); >>> +} >>> + >>> +static irqreturn_t exynos_tmu_irq(int irq, void *id) >>> +{ >>> + struct exynos_tmu_data *data = id; >>> + >>> + disable_irq_nosync(irq); >>> + schedule_work(&data->irq_work); >>> + >>> + return IRQ_HANDLED; >>> +} >>> + >>> +#if defined(CONFIG_CPU_EXYNOS4210) >>> +static struct exynos_tmu_platform_data const exynos4210_default_tmu_data >>> = { >>> + .threshold = 80, >>> + .trigger_levels[0] = 5, >>> + .trigger_levels[1] = 20, >>> + .trigger_levels[2] = 30, >>> + .trigger_level0_en = 1, >>> + .trigger_level1_en = 1, >>> + .trigger_level2_en = 1, >>> + .trigger_level3_en = 0, >>> + .gain = 15, >>> + .reference_voltage = 7, >>> + .cal_type = TYPE_ONE_POINT_TRIMMING, >>> + .freq_tab[0] = { >>> + .freq_clip_max = 800 * 1000, >>> + .temp_level = 85, >>> + }, >>> + .freq_tab[1] = { >>> + .freq_clip_max = 200 * 1000, >>> + .temp_level = 100, >>> + }, >>> + .freq_tab_count = 2, >>> + .type = SOC_ARCH_EXYNOS4210, >>> +}; >>> +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) >>> +#else >>> +#define EXYNOS4210_TMU_DRV_DATA (NULL) >>> +#endif >>> + >>> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) >>> +static struct exynos_tmu_platform_data const exynos_default_tmu_data = { >>> + .threshold_falling = 10, >>> + .trigger_levels[0] = 85, >>> + .trigger_levels[1] = 103, >>> + .trigger_levels[2] = 110, >>> + .trigger_level0_en = 1, >>> + .trigger_level1_en = 1, >>> + .trigger_level2_en = 1, >>> + .trigger_level3_en = 0, >>> + .gain = 8, >>> + .reference_voltage = 16, >>> + .noise_cancel_mode = 4, >>> + .cal_type = TYPE_ONE_POINT_TRIMMING, >>> + .efuse_value = 55, >>> + .freq_tab[0] = { >>> + .freq_clip_max = 800 * 1000, >>> + .temp_level = 85, >>> + }, >>> + .freq_tab[1] = { >>> + .freq_clip_max = 200 * 1000, >>> + .temp_level = 103, >>> + }, >>> + .freq_tab_count = 2, >>> + .type = SOC_ARCH_EXYNOS, >>> +}; >>> +#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data) >>> +#else >>> +#define EXYNOS_TMU_DRV_DATA (NULL) >>> +#endif >>> + >>> +#ifdef CONFIG_OF >>> +static const struct of_device_id exynos_tmu_match[] = { >>> + { >>> + .compatible = "samsung,exynos4210-tmu", >>> + .data = (void *)EXYNOS4210_TMU_DRV_DATA, >>> + }, >>> + { >>> + .compatible = "samsung,exynos5250-tmu", >>> + .data = (void *)EXYNOS_TMU_DRV_DATA, >>> + }, >>> + {}, >>> +}; >>> +MODULE_DEVICE_TABLE(of, exynos_tmu_match); >>> +#endif >>> + >>> +static struct platform_device_id exynos_tmu_driver_ids[] = { >>> + { >>> + .name = "exynos4210-tmu", >>> + .driver_data = (kernel_ulong_t)EXYNOS4210_TMU_DRV_DATA, >>> + }, >>> + { >>> + .name = "exynos5250-tmu", >>> + .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA, >>> + }, >>> + { }, >>> +}; >>> +MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids); >>> + >>> +static inline struct exynos_tmu_platform_data *exynos_get_driver_data( >>> + struct platform_device *pdev) >>> +{ >>> +#ifdef CONFIG_OF >>> + if (pdev->dev.of_node) { >>> + const struct of_device_id *match; >>> + match = of_match_node(exynos_tmu_match, >>> pdev->dev.of_node); >>> + if (!match) >>> + return NULL; >>> + return (struct exynos_tmu_platform_data *) match->data; >>> + } >>> +#endif >>> + return (struct exynos_tmu_platform_data *) >>> + platform_get_device_id(pdev)->driver_data; >>> +} >>> + >>> +static int exynos_tmu_probe(struct platform_device *pdev) >>> +{ >>> + struct exynos_tmu_data *data; >>> + struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data; >>> + int ret, i; >>> + >>> + if (!pdata) >>> + pdata = exynos_get_driver_data(pdev); >>> + >>> + if (!pdata) { >>> + dev_err(&pdev->dev, "No platform init data supplied.\n"); >>> + return -ENODEV; >>> + } >>> + data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), >>> + GFP_KERNEL); >>> + if (!data) { >>> + dev_err(&pdev->dev, "Failed to allocate driver >>> structure\n"); >>> + return -ENOMEM; >>> + } >>> + >>> + data->irq = platform_get_irq(pdev, 0); >>> + if (data->irq < 0) { >>> + dev_err(&pdev->dev, "Failed to get platform irq\n"); >>> + return data->irq; >>> + } >>> + >>> + INIT_WORK(&data->irq_work, exynos_tmu_work); >>> + >>> + data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> + if (!data->mem) { >>> + dev_err(&pdev->dev, "Failed to get platform resource\n"); >>> + return -ENOENT; >>> + } >>> + >>> + data->base = devm_ioremap_resource(&pdev->dev, data->mem); >>> + if (IS_ERR(data->base)) >>> + return PTR_ERR(data->base); >>> + >>> + ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, >>> + IRQF_TRIGGER_RISING, "exynos-tmu", data); >>> + if (ret) { >>> + dev_err(&pdev->dev, "Failed to request irq: %d\n", >>> data->irq); >>> + return ret; >>> + } >>> + >>> + data->clk = clk_get(NULL, "tmu_apbif"); >>> + if (IS_ERR(data->clk)) { >>> + dev_err(&pdev->dev, "Failed to get clock\n"); >>> + return PTR_ERR(data->clk); >>> + } >>> + >>> + if (pdata->type == SOC_ARCH_EXYNOS || >>> + pdata->type == SOC_ARCH_EXYNOS4210) >>> + data->soc = pdata->type; >>> + else { >>> + ret = -EINVAL; >>> + dev_err(&pdev->dev, "Platform not supported\n"); >>> + goto err_clk; >>> + } >>> + >>> + data->pdata = pdata; >>> + platform_set_drvdata(pdev, data); >>> + mutex_init(&data->lock); >>> + >>> + ret = exynos_tmu_initialize(pdev); >>> + if (ret) { >>> + dev_err(&pdev->dev, "Failed to initialize TMU\n"); >>> + goto err_clk; >>> + } >>> + >>> + exynos_tmu_control(pdev, true); >>> + >>> + /* Register the sensor with thermal management interface */ >>> + (&exynos_sensor_conf)->driver_data = data; >>> + exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en >>> + >>> + pdata->trigger_level1_en + >>> pdata->trigger_level2_en + >>> + pdata->trigger_level3_en; >>> + >>> + for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) >>> + exynos_sensor_conf.trip_data.trip_val[i] = >>> + pdata->threshold + pdata->trigger_levels[i]; >>> + >>> + exynos_sensor_conf.trip_data.trigger_falling = >>> pdata->threshold_falling; >>> + >>> + exynos_sensor_conf.cooling_data.freq_clip_count = >>> + pdata->freq_tab_count; >>> + for (i = 0; i < pdata->freq_tab_count; i++) { >>> + exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max >>> = >>> + pdata->freq_tab[i].freq_clip_max; >>> + exynos_sensor_conf.cooling_data.freq_data[i].temp_level = >>> + pdata->freq_tab[i].temp_level; >>> + } >>> + >>> + ret = exynos_register_thermal(&exynos_sensor_conf); >>> + if (ret) { >>> + dev_err(&pdev->dev, "Failed to register thermal >>> interface\n"); >>> + goto err_clk; >>> + } >>> + >>> + return 0; >>> +err_clk: >>> + platform_set_drvdata(pdev, NULL); >>> + clk_put(data->clk); >>> + return ret; >>> +} >>> + >>> +static int exynos_tmu_remove(struct platform_device *pdev) >>> +{ >>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev); >>> + >>> + exynos_tmu_control(pdev, false); >>> + >>> + exynos_unregister_thermal(&exynos_sensor_conf); >>> + >>> + clk_put(data->clk); >>> + >>> + platform_set_drvdata(pdev, NULL); >>> + >>> + return 0; >>> +} >>> + >>> +#ifdef CONFIG_PM_SLEEP >>> +static int exynos_tmu_suspend(struct device *dev) >>> +{ >>> + exynos_tmu_control(to_platform_device(dev), false); >>> + >>> + return 0; >>> +} >>> + >>> +static int exynos_tmu_resume(struct device *dev) >>> +{ >>> + struct platform_device *pdev = to_platform_device(dev); >>> + >>> + exynos_tmu_initialize(pdev); >>> + exynos_tmu_control(pdev, true); >>> + >>> + return 0; >>> +} >>> + >>> +static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, >>> + exynos_tmu_suspend, exynos_tmu_resume); >>> +#define EXYNOS_TMU_PM (&exynos_tmu_pm) >>> +#else >>> +#define EXYNOS_TMU_PM NULL >>> +#endif >>> + >>> +static struct platform_driver exynos_tmu_driver = { >>> + .driver = { >>> + .name = "exynos-tmu", >>> + .owner = THIS_MODULE, >>> + .pm = EXYNOS_TMU_PM, >>> + .of_match_table = of_match_ptr(exynos_tmu_match), >>> + }, >>> + .probe = exynos_tmu_probe, >>> + .remove = exynos_tmu_remove, >>> + .id_table = exynos_tmu_driver_ids, >>> +}; >>> + >>> +module_platform_driver(exynos_tmu_driver); >>> + >>> +MODULE_DESCRIPTION("EXYNOS TMU Driver"); >>> +MODULE_AUTHOR("Donggeun Kim "); >>> +MODULE_LICENSE("GPL"); >>> +MODULE_ALIAS("platform:exynos-tmu"); >>> diff --git a/drivers/thermal/samsung/exynos_common.c >>> b/drivers/thermal/samsung/exynos_common.c >>> new file mode 100644 >>> index 0000000..649d67c >>> --- /dev/null >>> +++ b/drivers/thermal/samsung/exynos_common.c >>> @@ -0,0 +1,421 @@ >>> +/* >>> + * exynos_common.c - Samsung EXYNOS common thermal file >>> + * >>> + * Copyright (C) 2013 Samsung Electronics >>> + * Amit Daniel Kachhap >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License as published by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU General Public License >>> + * along with this program; if not, write to the Free Software >>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 >>> USA >>> + * >>> + */ >>> + >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include >>> +#include "exynos_common.h" >>> + >>> +struct exynos_thermal_zone { >>> + enum thermal_device_mode mode; >>> + struct thermal_zone_device *therm_dev; >>> + struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE]; >>> + unsigned int cool_dev_size; >>> + struct platform_device *exynos4_dev; >>> + struct thermal_sensor_conf *sensor_conf; >>> + bool bind; >>> +}; >>> + >>> +/* Get mode callback functions for thermal zone */ >>> +static int exynos_get_mode(struct thermal_zone_device *thermal, >>> + enum thermal_device_mode *mode) >>> +{ >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + if (th_zone) >>> + *mode = th_zone->mode; >>> + return 0; >>> +} >>> + >>> +/* Set mode callback functions for thermal zone */ >>> +static int exynos_set_mode(struct thermal_zone_device *thermal, >>> + enum thermal_device_mode mode) >>> +{ >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + if (!th_zone) { >>> + pr_notice("thermal zone not registered\n"); >>> + return 0; >>> + } >>> + >>> + mutex_lock(&thermal->lock); >>> + >>> + if (mode == THERMAL_DEVICE_ENABLED && >>> + !th_zone->sensor_conf->trip_data.trigger_falling) >>> + thermal->polling_delay = IDLE_INTERVAL; >>> + else >>> + thermal->polling_delay = 0; >>> + >>> + mutex_unlock(&thermal->lock); >>> + >>> + th_zone->mode = mode; >>> + thermal_zone_device_update(thermal); >>> + pr_info("thermal polling set for duration=%d msec\n", >>> + thermal->polling_delay); >>> + return 0; >>> +} >>> + >>> + >>> +/* Get trip type callback functions for thermal zone */ >>> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int >>> trip, >>> + enum thermal_trip_type *type) >>> +{ >>> + switch (GET_ZONE(trip)) { >>> + case MONITOR_ZONE: >>> + case WARN_ZONE: >>> + *type = THERMAL_TRIP_ACTIVE; >>> + break; >>> + case PANIC_ZONE: >>> + *type = THERMAL_TRIP_CRITICAL; >>> + break; >>> + default: >>> + return -EINVAL; >>> + } >>> + return 0; >>> +} >>> + >>> +/* Get trip temperature callback functions for thermal zone */ >>> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int >>> trip, >>> + unsigned long *temp) >>> +{ >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + >>> + if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) >>> + return -EINVAL; >>> + >>> + *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; >>> + /* convert the temperature into millicelsius */ >>> + *temp = *temp * MCELSIUS; >>> + >>> + return 0; >>> +} >>> + >>> +/* Get critical temperature callback functions for thermal zone */ >>> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal, >>> + unsigned long *temp) >>> +{ >>> + int ret; >>> + /* Panic zone */ >>> + ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); >>> + return ret; >>> +} >>> + >>> +int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) >>> +{ >>> + int i = 0, ret = -EINVAL; >>> + struct cpufreq_frequency_table *table = NULL; >>> +#ifdef CONFIG_CPU_FREQ >>> + table = cpufreq_frequency_get_table(cpu); >>> +#endif >>> + if (!table) >>> + return ret; >>> + >>> + while (table[i].frequency != CPUFREQ_TABLE_END) { >>> + if (table[i].frequency == CPUFREQ_ENTRY_INVALID) >>> + continue; >>> + if (table[i].frequency == freq) >>> + return i; >>> + i++; >>> + } >>> + return ret; >>> +} >>> + >>> +/* Bind callback functions for thermal zone */ >>> +static int exynos_bind(struct thermal_zone_device *thermal, >>> + struct thermal_cooling_device *cdev) >>> +{ >>> + int ret = 0, i, tab_size, level; >>> + struct freq_clip_table *tab_ptr, *clip_data; >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + struct thermal_sensor_conf *data = th_zone->sensor_conf; >>> + >>> + tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data; >>> + tab_size = data->cooling_data.freq_clip_count; >>> + >>> + if (tab_ptr == NULL || tab_size == 0) >>> + return -EINVAL; >>> + >>> + /* find the cooling device registered*/ >>> + for (i = 0; i < th_zone->cool_dev_size; i++) >>> + if (cdev == th_zone->cool_dev[i]) >>> + break; >>> + >>> + /* No matching cooling device */ >>> + if (i == th_zone->cool_dev_size) >>> + return 0; >>> + >>> + /* Bind the thermal zone to the cpufreq cooling device */ >>> + for (i = 0; i < tab_size; i++) { >>> + clip_data = (struct freq_clip_table *)&(tab_ptr[i]); >>> + level = exynos_get_frequency_level(0, >>> clip_data->freq_clip_max); >>> + if (level < 0) >>> + return 0; >>> + switch (GET_ZONE(i)) { >>> + case MONITOR_ZONE: >>> + case WARN_ZONE: >>> + if (thermal_zone_bind_cooling_device(thermal, i, >>> cdev, >>> + level, 0)) >>> { >>> + pr_err("error binding cdev inst %d\n", i); >>> + ret = -EINVAL; >>> + } >>> + th_zone->bind = true; >>> + break; >>> + default: >>> + ret = -EINVAL; >>> + } >>> + } >>> + >>> + return ret; >>> +} >>> + >>> +/* Unbind callback functions for thermal zone */ >>> +static int exynos_unbind(struct thermal_zone_device *thermal, >>> + struct thermal_cooling_device *cdev) >>> +{ >>> + int ret = 0, i, tab_size; >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + struct thermal_sensor_conf *data = th_zone->sensor_conf; >>> + >>> + if (th_zone->bind == false) >>> + return 0; >>> + >>> + tab_size = data->cooling_data.freq_clip_count; >>> + >>> + if (tab_size == 0) >>> + return -EINVAL; >>> + >>> + /* find the cooling device registered*/ >>> + for (i = 0; i < th_zone->cool_dev_size; i++) >>> + if (cdev == th_zone->cool_dev[i]) >>> + break; >>> + >>> + /* No matching cooling device */ >>> + if (i == th_zone->cool_dev_size) >>> + return 0; >>> + >>> + /* Bind the thermal zone to the cpufreq cooling device */ >>> + for (i = 0; i < tab_size; i++) { >>> + switch (GET_ZONE(i)) { >>> + case MONITOR_ZONE: >>> + case WARN_ZONE: >>> + if (thermal_zone_unbind_cooling_device(thermal, i, >>> + cdev)) { >>> + pr_err("error unbinding cdev inst=%d\n", >>> i); >>> + ret = -EINVAL; >>> + } >>> + th_zone->bind = false; >>> + break; >>> + default: >>> + ret = -EINVAL; >>> + } >>> + } >>> + return ret; >>> +} >>> + >>> +/* Get temperature callback functions for thermal zone */ >>> +static int exynos_get_temp(struct thermal_zone_device *thermal, >>> + unsigned long *temp) >>> +{ >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + void *data; >>> + >>> + if (!th_zone->sensor_conf) { >>> + pr_info("Temperature sensor not initialised\n"); >>> + return -EINVAL; >>> + } >>> + data = th_zone->sensor_conf->driver_data; >>> + *temp = th_zone->sensor_conf->read_temperature(data); >>> + /* convert the temperature into millicelsius */ >>> + *temp = *temp * MCELSIUS; >>> + return 0; >>> +} >>> + >>> +/* Get temperature callback functions for thermal zone */ >>> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal, >>> + unsigned long temp) >>> +{ >>> + void *data; >>> + int ret = -EINVAL; >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + >>> + if (!th_zone->sensor_conf) { >>> + pr_info("Temperature sensor not initialised\n"); >>> + return -EINVAL; >>> + } >>> + data = th_zone->sensor_conf->driver_data; >>> + if (th_zone->sensor_conf->write_emul_temp) >>> + ret = th_zone->sensor_conf->write_emul_temp(data, temp); >>> + return ret; >>> +} >>> + >>> +/* Get the temperature trend */ >>> +static int exynos_get_trend(struct thermal_zone_device *thermal, >>> + int trip, enum thermal_trend *trend) >>> +{ >>> + int ret = 0; >>> + unsigned long trip_temp; >>> + >>> + ret = exynos_get_trip_temp(thermal, trip, &trip_temp); >>> + if (ret < 0) >>> + return ret; >>> + >>> + if (thermal->temperature >= trip_temp) >>> + *trend = THERMAL_TREND_RAISE_FULL; >>> + else >>> + *trend = THERMAL_TREND_DROP_FULL; >>> + >>> + return ret; >>> +} >>> +/* Operation callback functions for thermal zone */ >>> +static struct thermal_zone_device_ops const exynos_dev_ops = { >>> + .bind = exynos_bind, >>> + .unbind = exynos_unbind, >>> + .get_temp = exynos_get_temp, >>> + .set_emul_temp = exynos_set_emul_temp, >>> + .get_trend = exynos_get_trend, >>> + .get_mode = exynos_get_mode, >>> + .set_mode = exynos_set_mode, >>> + .get_trip_type = exynos_get_trip_type, >>> + .get_trip_temp = exynos_get_trip_temp, >>> + .get_crit_temp = exynos_get_crit_temp, >>> +}; >>> + >>> +/* >>> + * This function may be called from interrupt based temperature sensor >>> + * when threshold is changed. >>> + */ >>> +void exynos_report_trigger(struct thermal_sensor_conf *conf) >>> +{ >>> + unsigned int i; >>> + char data[10]; >>> + char *envp[] = { data, NULL }; >>> + struct exynos_thermal_zone *th_zone = conf->pzone_data; >>> + >>> + if (!th_zone || !th_zone->therm_dev) >>> + return; >>> + if (th_zone->bind == false) { >>> + for (i = 0; i < th_zone->cool_dev_size; i++) { >>> + if (!th_zone->cool_dev[i]) >>> + continue; >>> + exynos_bind(th_zone->therm_dev, >>> + th_zone->cool_dev[i]); >>> + } >>> + } >>> + >>> + thermal_zone_device_update(th_zone->therm_dev); >>> + >>> + mutex_lock(&th_zone->therm_dev->lock); >>> + /* Find the level for which trip happened */ >>> + for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) { >>> + if (th_zone->therm_dev->last_temperature < >>> + th_zone->sensor_conf->trip_data.trip_val[i] * >>> MCELSIUS) >>> + break; >>> + } >>> + >>> + if (th_zone->mode == THERMAL_DEVICE_ENABLED && >>> + !th_zone->sensor_conf->trip_data.trigger_falling) { >>> + if (i > 0) >>> + th_zone->therm_dev->polling_delay = >>> ACTIVE_INTERVAL; >>> + else >>> + th_zone->therm_dev->polling_delay = IDLE_INTERVAL; >>> + } >>> + >>> + snprintf(data, sizeof(data), "%u", i); >>> + kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, >>> envp); >>> + mutex_unlock(&th_zone->therm_dev->lock); >>> +} >>> + >>> +/* Register with the in-kernel thermal management */ >>> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) >>> +{ >>> + int ret, id; >>> + struct cpumask mask_val; >>> + struct exynos_thermal_zone *th_zone; >>> + >>> + if (!sensor_conf || !sensor_conf->read_temperature) { >>> + pr_err("Temperature sensor not initialised\n"); >>> + return -EINVAL; >>> + } >>> + >>> + th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL); >>> + if (!th_zone) >>> + return -ENOMEM; >>> + >>> + th_zone->sensor_conf = sensor_conf; >>> + cpumask_set_cpu(0, &mask_val); >>> + th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); >>> + if (IS_ERR(th_zone->cool_dev[0])) { >>> + pr_err("Failed to register cpufreq cooling device\n"); >>> + ret = -EINVAL; >>> + goto err_unregister; >>> + } >>> + th_zone->cool_dev_size++; >>> + >>> + th_zone->therm_dev = >>> thermal_zone_device_register(sensor_conf->name, >>> + EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, >>> NULL, 0, >>> + sensor_conf->trip_data.trigger_falling ? >>> + 0 : IDLE_INTERVAL); >>> + >>> + if (IS_ERR(th_zone->therm_dev)) { >>> + pr_err("Failed to register thermal zone device\n"); >>> + ret = PTR_ERR(th_zone->therm_dev); >>> + goto err_unregister; >>> + } >>> + th_zone->mode = THERMAL_DEVICE_ENABLED; >>> + sensor_conf->pzone_data = th_zone; >>> + id = th_zone->therm_dev->id; >>> + >>> + pr_info("Exynos: Kernel Thermal[%d] management registered\n", id); >>> + >>> + return 0; >>> + >>> +err_unregister: >>> + exynos_unregister_thermal(sensor_conf); >>> + return ret; >>> +} >>> + >>> +/* Un-Register with the in-kernel thermal management */ >>> +void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) >>> +{ >>> + int i, id; >>> + struct exynos_thermal_zone *th_zone = sensor_conf->pzone_data; >>> + >>> + if (!th_zone) >>> + return; >>> + >>> + id = th_zone->therm_dev->id; >>> + if (th_zone->therm_dev) >>> + thermal_zone_device_unregister(th_zone->therm_dev); >>> + >>> + for (i = 0; i < th_zone->cool_dev_size; i++) { >>> + if (th_zone->cool_dev[i]) >>> + cpufreq_cooling_unregister(th_zone->cool_dev[i]); >>> + } >>> + >>> + kfree(th_zone); >>> + pr_info("Exynos: Kernel Thermal[%d] management unregistered\n", >>> id); >>> +} >>> diff --git a/drivers/thermal/samsung/exynos_common.h >>> b/drivers/thermal/samsung/exynos_common.h >>> new file mode 100644 >>> index 0000000..b8d289e >>> --- /dev/null >>> +++ b/drivers/thermal/samsung/exynos_common.h >>> @@ -0,0 +1,73 @@ >>> +/* >>> + * exynos_common.h - Samsung EXYNOS common header file >>> + * >>> + * Copyright (C) 2013 Samsung Electronics >>> + * Amit Daniel Kachhap >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License as published by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU General Public License >>> + * along with this program; if not, write to the Free Software >>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 >>> USA >>> + * >>> + */ >>> + >>> +#ifndef _LINUX_EXYNOS_COMMON_H >>> +#define _LINUX_EXYNOS_COMMON_H >>> + >>> +/* In-kernel thermal framework related macros & definations */ >>> +#define SENSOR_NAME_LEN 16 >>> +#define MAX_TRIP_COUNT 8 >>> +#define MAX_COOLING_DEVICE 4 >>> +#define MAX_THRESHOLD_LEVS 4 >>> + >>> +#define ACTIVE_INTERVAL 500 >>> +#define IDLE_INTERVAL 10000 >>> +#define MCELSIUS 1000 >>> + >>> +/* CPU Zone information */ >>> +#define PANIC_ZONE 4 >>> +#define WARN_ZONE 3 >>> +#define MONITOR_ZONE 2 >>> +#define SAFE_ZONE 1 >>> + >>> +#define GET_ZONE(trip) (trip + 2) >>> +#define GET_TRIP(zone) (zone - 2) >>> + >>> +#define EXYNOS_ZONE_COUNT 3 >>> + >>> +struct thermal_trip_point_conf { >>> + int trip_val[MAX_TRIP_COUNT]; >>> + int trip_count; >>> + u8 trigger_falling; >>> +}; >>> + >>> +struct thermal_cooling_conf { >>> + struct freq_clip_table freq_data[MAX_TRIP_COUNT]; >>> + int freq_clip_count; >>> +}; >>> + >>> +struct thermal_sensor_conf { >>> + char name[SENSOR_NAME_LEN]; >>> + int (*read_temperature)(void *data); >>> + int (*write_emul_temp)(void *drv_data, unsigned long temp); >>> + struct thermal_trip_point_conf trip_data; >>> + struct thermal_cooling_conf cooling_data; >>> + void *driver_data; >>> + void *pzone_data; >>> +}; >>> + >>> +/*Functions used exynos based thermal sensor driver*/ >>> +void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf); >>> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf); >>> +void exynos_report_trigger(struct thermal_sensor_conf *sensor_conf); >>> +int exynos_get_frequency_level(unsigned int cpu, unsigned int freq); >>> +#endif /* _LINUX_EXYNOS_COMMON_H */ >>> diff --git a/drivers/thermal/samsung/exynos_thermal.c >>> b/drivers/thermal/samsung/exynos_thermal.c >>> deleted file mode 100644 >>> index dc9b91b..0000000 >>> --- a/drivers/thermal/samsung/exynos_thermal.c >>> +++ /dev/null >>> @@ -1,1093 +0,0 @@ >>> -/* >>> - * exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit) >>> - * >>> - * Copyright (C) 2011 Samsung Electronics >>> - * Donggeun Kim >>> - * Amit Daniel Kachhap >>> - * >>> - * This program is free software; you can redistribute it and/or modify >>> - * it under the terms of the GNU General Public License as published by >>> - * the Free Software Foundation; either version 2 of the License, or >>> - * (at your option) any later version. >>> - * >>> - * This program is distributed in the hope that it will be useful, >>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> - * GNU General Public License for more details. >>> - * >>> - * You should have received a copy of the GNU General Public License >>> - * along with this program; if not, write to the Free Software >>> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 >>> USA >>> - * >>> - */ >>> - >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> -#include >>> - >>> -#include >>> - >>> -/* Exynos generic registers */ >>> -#define EXYNOS_TMU_REG_TRIMINFO 0x0 >>> -#define EXYNOS_TMU_REG_CONTROL 0x20 >>> -#define EXYNOS_TMU_REG_STATUS 0x28 >>> -#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 >>> -#define EXYNOS_TMU_REG_INTEN 0x70 >>> -#define EXYNOS_TMU_REG_INTSTAT 0x74 >>> -#define EXYNOS_TMU_REG_INTCLEAR 0x78 >>> - >>> -#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff >>> -#define EXYNOS_TMU_GAIN_SHIFT 8 >>> -#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 >>> -#define EXYNOS_TMU_CORE_ON 3 >>> -#define EXYNOS_TMU_CORE_OFF 2 >>> -#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 >>> - >>> -/* Exynos4210 specific registers */ >>> -#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 >>> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 >>> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 >>> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 >>> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C >>> -#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 >>> -#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 >>> -#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 >>> -#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C >>> - >>> -#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 >>> -#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 >>> -#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 >>> -#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 >>> -#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 >>> - >>> -/* Exynos5250 and Exynos4412 specific registers */ >>> -#define EXYNOS_TMU_TRIMINFO_CON 0x14 >>> -#define EXYNOS_THD_TEMP_RISE 0x50 >>> -#define EXYNOS_THD_TEMP_FALL 0x54 >>> -#define EXYNOS_EMUL_CON 0x80 >>> - >>> -#define EXYNOS_TRIMINFO_RELOAD 0x1 >>> -#define EXYNOS_TMU_CLEAR_RISE_INT 0x111 >>> -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) >>> -#define EXYNOS_MUX_ADDR_VALUE 6 >>> -#define EXYNOS_MUX_ADDR_SHIFT 20 >>> -#define EXYNOS_TMU_TRIP_MODE_SHIFT 13 >>> - >>> -#define EFUSE_MIN_VALUE 40 >>> -#define EFUSE_MAX_VALUE 100 >>> - >>> -/* In-kernel thermal framework related macros & definations */ >>> -#define SENSOR_NAME_LEN 16 >>> -#define MAX_TRIP_COUNT 8 >>> -#define MAX_COOLING_DEVICE 4 >>> -#define MAX_THRESHOLD_LEVS 4 >>> - >>> -#define ACTIVE_INTERVAL 500 >>> -#define IDLE_INTERVAL 10000 >>> -#define MCELSIUS 1000 >>> - >>> -#ifdef CONFIG_THERMAL_EMULATION >>> -#define EXYNOS_EMUL_TIME 0x57F0 >>> -#define EXYNOS_EMUL_TIME_SHIFT 16 >>> -#define EXYNOS_EMUL_DATA_SHIFT 8 >>> -#define EXYNOS_EMUL_DATA_MASK 0xFF >>> -#define EXYNOS_EMUL_ENABLE 0x1 >>> -#endif /* CONFIG_THERMAL_EMULATION */ >>> - >>> -/* CPU Zone information */ >>> -#define PANIC_ZONE 4 >>> -#define WARN_ZONE 3 >>> -#define MONITOR_ZONE 2 >>> -#define SAFE_ZONE 1 >>> - >>> -#define GET_ZONE(trip) (trip + 2) >>> -#define GET_TRIP(zone) (zone - 2) >>> - >>> -#define EXYNOS_ZONE_COUNT 3 >>> - >>> -struct exynos_tmu_data { >>> - struct exynos_tmu_platform_data *pdata; >>> - struct resource *mem; >>> - void __iomem *base; >>> - int irq; >>> - enum soc_type soc; >>> - struct work_struct irq_work; >>> - struct mutex lock; >>> - struct clk *clk; >>> - u8 temp_error1, temp_error2; >>> -}; >>> - >>> -struct thermal_trip_point_conf { >>> - int trip_val[MAX_TRIP_COUNT]; >>> - int trip_count; >>> - u8 trigger_falling; >>> -}; >>> - >>> -struct thermal_cooling_conf { >>> - struct freq_clip_table freq_data[MAX_TRIP_COUNT]; >>> - int freq_clip_count; >>> -}; >>> - >>> -struct thermal_sensor_conf { >>> - char name[SENSOR_NAME_LEN]; >>> - int (*read_temperature)(void *data); >>> - int (*write_emul_temp)(void *drv_data, unsigned long temp); >>> - struct thermal_trip_point_conf trip_data; >>> - struct thermal_cooling_conf cooling_data; >>> - void *driver_data; >>> - void *pzone_data; >>> -}; >>> - >>> -struct exynos_thermal_zone { >>> - enum thermal_device_mode mode; >>> - struct thermal_zone_device *therm_dev; >>> - struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE]; >>> - unsigned int cool_dev_size; >>> - struct platform_device *exynos4_dev; >>> - struct thermal_sensor_conf *sensor_conf; >>> - bool bind; >>> -}; >>> - >>> -static void exynos_unregister_thermal(struct thermal_sensor_conf >>> *sensor_conf); >>> -static int exynos_register_thermal(struct thermal_sensor_conf >>> *sensor_conf); >>> - >>> -/* Get mode callback functions for thermal zone */ >>> -static int exynos_get_mode(struct thermal_zone_device *thermal, >>> - enum thermal_device_mode *mode) >>> -{ >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - if (th_zone) >>> - *mode = th_zone->mode; >>> - return 0; >>> -} >>> - >>> -/* Set mode callback functions for thermal zone */ >>> -static int exynos_set_mode(struct thermal_zone_device *thermal, >>> - enum thermal_device_mode mode) >>> -{ >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - if (!th_zone) { >>> - pr_notice("thermal zone not registered\n"); >>> - return 0; >>> - } >>> - >>> - mutex_lock(&thermal->lock); >>> - >>> - if (mode == THERMAL_DEVICE_ENABLED && >>> - !th_zone->sensor_conf->trip_data.trigger_falling) >>> - thermal->polling_delay = IDLE_INTERVAL; >>> - else >>> - thermal->polling_delay = 0; >>> - >>> - mutex_unlock(&thermal->lock); >>> - >>> - th_zone->mode = mode; >>> - thermal_zone_device_update(thermal); >>> - pr_info("thermal polling set for duration=%d msec\n", >>> - thermal->polling_delay); >>> - return 0; >>> -} >>> - >>> - >>> -/* Get trip type callback functions for thermal zone */ >>> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int >>> trip, >>> - enum thermal_trip_type *type) >>> -{ >>> - switch (GET_ZONE(trip)) { >>> - case MONITOR_ZONE: >>> - case WARN_ZONE: >>> - *type = THERMAL_TRIP_ACTIVE; >>> - break; >>> - case PANIC_ZONE: >>> - *type = THERMAL_TRIP_CRITICAL; >>> - break; >>> - default: >>> - return -EINVAL; >>> - } >>> - return 0; >>> -} >>> - >>> -/* Get trip temperature callback functions for thermal zone */ >>> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int >>> trip, >>> - unsigned long *temp) >>> -{ >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - >>> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) >>> - return -EINVAL; >>> - >>> - *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; >>> - /* convert the temperature into millicelsius */ >>> - *temp = *temp * MCELSIUS; >>> - >>> - return 0; >>> -} >>> - >>> -/* Get critical temperature callback functions for thermal zone */ >>> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal, >>> - unsigned long *temp) >>> -{ >>> - int ret; >>> - /* Panic zone */ >>> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); >>> - return ret; >>> -} >>> - >>> -static int exynos_get_frequency_level(unsigned int cpu, unsigned int >>> freq) >>> -{ >>> - int i = 0, ret = -EINVAL; >>> - struct cpufreq_frequency_table *table = NULL; >>> -#ifdef CONFIG_CPU_FREQ >>> - table = cpufreq_frequency_get_table(cpu); >>> -#endif >>> - if (!table) >>> - return ret; >>> - >>> - while (table[i].frequency != CPUFREQ_TABLE_END) { >>> - if (table[i].frequency == CPUFREQ_ENTRY_INVALID) >>> - continue; >>> - if (table[i].frequency == freq) >>> - return i; >>> - i++; >>> - } >>> - return ret; >>> -} >>> - >>> -/* Bind callback functions for thermal zone */ >>> -static int exynos_bind(struct thermal_zone_device *thermal, >>> - struct thermal_cooling_device *cdev) >>> -{ >>> - int ret = 0, i, tab_size, level; >>> - struct freq_clip_table *tab_ptr, *clip_data; >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - struct thermal_sensor_conf *data = th_zone->sensor_conf; >>> - >>> - tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data; >>> - tab_size = data->cooling_data.freq_clip_count; >>> - >>> - if (tab_ptr == NULL || tab_size == 0) >>> - return -EINVAL; >>> - >>> - /* find the cooling device registered*/ >>> - for (i = 0; i < th_zone->cool_dev_size; i++) >>> - if (cdev == th_zone->cool_dev[i]) >>> - break; >>> - >>> - /* No matching cooling device */ >>> - if (i == th_zone->cool_dev_size) >>> - return 0; >>> - >>> - /* Bind the thermal zone to the cpufreq cooling device */ >>> - for (i = 0; i < tab_size; i++) { >>> - clip_data = (struct freq_clip_table *)&(tab_ptr[i]); >>> - level = exynos_get_frequency_level(0, >>> clip_data->freq_clip_max); >>> - if (level < 0) >>> - return 0; >>> - switch (GET_ZONE(i)) { >>> - case MONITOR_ZONE: >>> - case WARN_ZONE: >>> - if (thermal_zone_bind_cooling_device(thermal, i, >>> cdev, >>> - level, 0)) >>> { >>> - pr_err("error binding cdev inst %d\n", i); >>> - ret = -EINVAL; >>> - } >>> - th_zone->bind = true; >>> - break; >>> - default: >>> - ret = -EINVAL; >>> - } >>> - } >>> - >>> - return ret; >>> -} >>> - >>> -/* Unbind callback functions for thermal zone */ >>> -static int exynos_unbind(struct thermal_zone_device *thermal, >>> - struct thermal_cooling_device *cdev) >>> -{ >>> - int ret = 0, i, tab_size; >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - struct thermal_sensor_conf *data = th_zone->sensor_conf; >>> - >>> - if (th_zone->bind == false) >>> - return 0; >>> - >>> - tab_size = data->cooling_data.freq_clip_count; >>> - >>> - if (tab_size == 0) >>> - return -EINVAL; >>> - >>> - /* find the cooling device registered*/ >>> - for (i = 0; i < th_zone->cool_dev_size; i++) >>> - if (cdev == th_zone->cool_dev[i]) >>> - break; >>> - >>> - /* No matching cooling device */ >>> - if (i == th_zone->cool_dev_size) >>> - return 0; >>> - >>> - /* Bind the thermal zone to the cpufreq cooling device */ >>> - for (i = 0; i < tab_size; i++) { >>> - switch (GET_ZONE(i)) { >>> - case MONITOR_ZONE: >>> - case WARN_ZONE: >>> - if (thermal_zone_unbind_cooling_device(thermal, i, >>> - cdev)) { >>> - pr_err("error unbinding cdev inst=%d\n", >>> i); >>> - ret = -EINVAL; >>> - } >>> - th_zone->bind = false; >>> - break; >>> - default: >>> - ret = -EINVAL; >>> - } >>> - } >>> - return ret; >>> -} >>> - >>> -/* Get temperature callback functions for thermal zone */ >>> -static int exynos_get_temp(struct thermal_zone_device *thermal, >>> - unsigned long *temp) >>> -{ >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - void *data; >>> - >>> - if (!th_zone->sensor_conf) { >>> - pr_info("Temperature sensor not initialised\n"); >>> - return -EINVAL; >>> - } >>> - data = th_zone->sensor_conf->driver_data; >>> - *temp = th_zone->sensor_conf->read_temperature(data); >>> - /* convert the temperature into millicelsius */ >>> - *temp = *temp * MCELSIUS; >>> - return 0; >>> -} >>> - >>> -/* Get temperature callback functions for thermal zone */ >>> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal, >>> - unsigned long temp) >>> -{ >>> - void *data; >>> - int ret = -EINVAL; >>> - struct exynos_thermal_zone *th_zone = thermal->devdata; >>> - >>> - if (!th_zone->sensor_conf) { >>> - pr_info("Temperature sensor not initialised\n"); >>> - return -EINVAL; >>> - } >>> - data = th_zone->sensor_conf->driver_data; >>> - if (th_zone->sensor_conf->write_emul_temp) >>> - ret = th_zone->sensor_conf->write_emul_temp(data, temp); >>> - return ret; >>> -} >>> - >>> -/* Get the temperature trend */ >>> -static int exynos_get_trend(struct thermal_zone_device *thermal, >>> - int trip, enum thermal_trend *trend) >>> -{ >>> - int ret = 0; >>> - unsigned long trip_temp; >>> - >>> - ret = exynos_get_trip_temp(thermal, trip, &trip_temp); >>> - if (ret < 0) >>> - return ret; >>> - >>> - if (thermal->temperature >= trip_temp) >>> - *trend = THERMAL_TREND_RAISE_FULL; >>> - else >>> - *trend = THERMAL_TREND_DROP_FULL; >>> - >>> - return ret; >>> -} >>> -/* Operation callback functions for thermal zone */ >>> -static struct thermal_zone_device_ops const exynos_dev_ops = { >>> - .bind = exynos_bind, >>> - .unbind = exynos_unbind, >>> - .get_temp = exynos_get_temp, >>> - .set_emul_temp = exynos_set_emul_temp, >>> - .get_trend = exynos_get_trend, >>> - .get_mode = exynos_get_mode, >>> - .set_mode = exynos_set_mode, >>> - .get_trip_type = exynos_get_trip_type, >>> - .get_trip_temp = exynos_get_trip_temp, >>> - .get_crit_temp = exynos_get_crit_temp, >>> -}; >>> - >>> -/* >>> - * This function may be called from interrupt based temperature sensor >>> - * when threshold is changed. >>> - */ >>> -static void exynos_report_trigger(struct thermal_sensor_conf *conf) >>> -{ >>> - unsigned int i; >>> - char data[10]; >>> - char *envp[] = { data, NULL }; >>> - struct exynos_thermal_zone *th_zone = conf->pzone_data; >>> - >>> - if (!th_zone || !th_zone->therm_dev) >>> - return; >>> - if (th_zone->bind == false) { >>> - for (i = 0; i < th_zone->cool_dev_size; i++) { >>> - if (!th_zone->cool_dev[i]) >>> - continue; >>> - exynos_bind(th_zone->therm_dev, >>> - th_zone->cool_dev[i]); >>> - } >>> - } >>> - >>> - thermal_zone_device_update(th_zone->therm_dev); >>> - >>> - mutex_lock(&th_zone->therm_dev->lock); >>> - /* Find the level for which trip happened */ >>> - for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) { >>> - if (th_zone->therm_dev->last_temperature < >>> - th_zone->sensor_conf->trip_data.trip_val[i] * >>> MCELSIUS) >>> - break; >>> - } >>> - >>> - if (th_zone->mode == THERMAL_DEVICE_ENABLED && >>> - !th_zone->sensor_conf->trip_data.trigger_falling) { >>> - if (i > 0) >>> - th_zone->therm_dev->polling_delay = >>> ACTIVE_INTERVAL; >>> - else >>> - th_zone->therm_dev->polling_delay = IDLE_INTERVAL; >>> - } >>> - >>> - snprintf(data, sizeof(data), "%u", i); >>> - kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, >>> envp); >>> - mutex_unlock(&th_zone->therm_dev->lock); >>> -} >>> - >>> -/* Register with the in-kernel thermal management */ >>> -static int exynos_register_thermal(struct thermal_sensor_conf >>> *sensor_conf) >>> -{ >>> - int ret; >>> - struct cpumask mask_val; >>> - struct exynos_thermal_zone *th_zone; >>> - >>> - if (!sensor_conf || !sensor_conf->read_temperature) { >>> - pr_err("Temperature sensor not initialised\n"); >>> - return -EINVAL; >>> - } >>> - >>> - th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL); >>> - if (!th_zone) >>> - return -ENOMEM; >>> - >>> - th_zone->sensor_conf = sensor_conf; >>> - cpumask_set_cpu(0, &mask_val); >>> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); >>> - if (IS_ERR(th_zone->cool_dev[0])) { >>> - pr_err("Failed to register cpufreq cooling device\n"); >>> - ret = -EINVAL; >>> - goto err_unregister; >>> - } >>> - th_zone->cool_dev_size++; >>> - >>> - th_zone->therm_dev = >>> thermal_zone_device_register(sensor_conf->name, >>> - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, >>> NULL, 0, >>> - sensor_conf->trip_data.trigger_falling ? >>> - 0 : IDLE_INTERVAL); >>> - >>> - if (IS_ERR(th_zone->therm_dev)) { >>> - pr_err("Failed to register thermal zone device\n"); >>> - ret = PTR_ERR(th_zone->therm_dev); >>> - goto err_unregister; >>> - } >>> - th_zone->mode = THERMAL_DEVICE_ENABLED; >>> - sensor_conf->pzone_data = th_zone; >>> - >>> - pr_info("Exynos: Kernel Thermal management registered\n"); >>> - >>> - return 0; >>> - >>> -err_unregister: >>> - exynos_unregister_thermal(sensor_conf); >>> - return ret; >>> -} >>> - >>> -/* Un-Register with the in-kernel thermal management */ >>> -static void exynos_unregister_thermal(struct thermal_sensor_conf >>> *sensor_conf) >>> -{ >>> - int i; >>> - struct exynos_thermal_zone *th_zone = sensor_conf->pzone_data; >>> - >>> - if (!th_zone) >>> - return; >>> - >>> - if (th_zone->therm_dev) >>> - thermal_zone_device_unregister(th_zone->therm_dev); > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/