Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751468Ab3DPEIz (ORCPT ); Tue, 16 Apr 2013 00:08:55 -0400 Received: from mail-qc0-f202.google.com ([209.85.216.202]:39658 "EHLO mail-qc0-f202.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751000Ab3DPEIy (ORCPT ); Tue, 16 Apr 2013 00:08:54 -0400 From: Doug Anderson To: Mark Brown , Grant Likely Cc: Thomas Abraham , Linus Walleij , Kukjin Kim , heiko@sntech.de, Jaswinder Singh , Tomasz Figa , linux-samsung-soc@vger.kernel.org, spi-devel-general@lists.sourceforge.net, linux-arm-kernel@lists.infradead.org, Doug Anderson , Rob Herring , Rob Landley , Ben Dooks , Mark Brown , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [REPOST PATCH] spi: s3c64xx: let device core setup the default pin configuration Date: Mon, 15 Apr 2013 20:42:57 -0700 Message-Id: <1366083777-9118-1-git-send-email-dianders@chromium.org> X-Mailer: git-send-email 1.8.1.3 In-Reply-To: <1362570130-14084-1-git-send-email-thomas.abraham@linaro.org> References: <1362570130-14084-1-git-send-email-thomas.abraham@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5415 Lines: 181 From: Thomas Abraham With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham Signed-off-by: Doug Anderson Acked-by: Linus Walleij Reviewed-by: Doug Anderson Tested-by: Doug Anderson --- .../devicetree/bindings/spi/spi-samsung.txt | 8 +-- drivers/spi/spi-s3c64xx.c | 66 ++-------------------- 2 files changed, 6 insertions(+), 68 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index a15ffed..86aa061 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -31,9 +31,6 @@ Required Board Specific Properties: - #address-cells: should be 1. - #size-cells: should be 0. -- gpios: The gpio specifier for clock, mosi and miso interface lines (in the - order specified). The format of the gpio specifier depends on the gpio - controller. Optional Board Specific Properties: @@ -86,9 +83,8 @@ Example: spi_0: spi@12d20000 { #address-cells = <1>; #size-cells = <0>; - gpios = <&gpa2 4 2 3 0>, - <&gpa2 6 2 3 0>, - <&gpa2 7 2 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; w25q80bw@0 { #address-cells = <1>; diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 4989aeb..4ab992b 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1148,41 +1148,6 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) } #ifdef CONFIG_OF -static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd) -{ - struct device *dev = &sdd->pdev->dev; - int idx, gpio, ret; - - /* find gpios for mosi, miso and clock lines */ - for (idx = 0; idx < 3; idx++) { - gpio = of_get_gpio(dev->of_node, idx); - if (!gpio_is_valid(gpio)) { - dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio); - goto free_gpio; - } - sdd->gpios[idx] = gpio; - ret = gpio_request(gpio, "spi-bus"); - if (ret) { - dev_err(dev, "gpio [%d] request failed: %d\n", - gpio, ret); - goto free_gpio; - } - } - return 0; - -free_gpio: - while (--idx >= 0) - gpio_free(sdd->gpios[idx]); - return -EINVAL; -} - -static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd) -{ - unsigned int idx; - for (idx = 0; idx < 3; idx++) - gpio_free(sdd->gpios[idx]); -} - static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) { struct s3c64xx_spi_info *sci; @@ -1215,15 +1180,6 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) { return dev->platform_data; } - -static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd) -{ - return -EINVAL; -} - -static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd) -{ -} #endif static const struct of_device_id s3c64xx_spi_dt_match[]; @@ -1344,10 +1300,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) goto err0; } - if (!sci->cfg_gpio && pdev->dev.of_node) { - if (s3c64xx_spi_parse_dt_gpio(sdd)) - return -EBUSY; - } else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) { + if (sci->cfg_gpio && sci->cfg_gpio()) { dev_err(&pdev->dev, "Unable to config gpio\n"); ret = -EBUSY; goto err0; @@ -1358,13 +1311,13 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) if (IS_ERR(sdd->clk)) { dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); ret = PTR_ERR(sdd->clk); - goto err1; + goto err0; } if (clk_prepare_enable(sdd->clk)) { dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); ret = -EBUSY; - goto err1; + goto err0; } sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr); @@ -1421,9 +1374,6 @@ err3: clk_disable_unprepare(sdd->src_clk); err2: clk_disable_unprepare(sdd->clk); -err1: - if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node) - s3c64xx_spi_dt_gpio_free(sdd); err0: platform_set_drvdata(pdev, NULL); spi_master_put(master); @@ -1446,9 +1396,6 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) clk_disable_unprepare(sdd->clk); - if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node) - s3c64xx_spi_dt_gpio_free(sdd); - platform_set_drvdata(pdev, NULL); spi_master_put(master); @@ -1467,9 +1414,6 @@ static int s3c64xx_spi_suspend(struct device *dev) clk_disable_unprepare(sdd->src_clk); clk_disable_unprepare(sdd->clk); - if (!sdd->cntrlr_info->cfg_gpio && dev->of_node) - s3c64xx_spi_dt_gpio_free(sdd); - sdd->cur_speed = 0; /* Output Clock is stopped */ return 0; @@ -1481,9 +1425,7 @@ static int s3c64xx_spi_resume(struct device *dev) struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - if (!sci->cfg_gpio && dev->of_node) - s3c64xx_spi_parse_dt_gpio(sdd); - else + if (sci->cfg_gpio) sci->cfg_gpio(); /* Enable the clock */ -- 1.8.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/