Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965926Ab3DQRRh (ORCPT ); Wed, 17 Apr 2013 13:17:37 -0400 Received: from perches-mx.perches.com ([206.117.179.246]:36079 "EHLO labridge.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S965479Ab3DQRR3 (ORCPT ); Wed, 17 Apr 2013 13:17:29 -0400 Message-ID: <1366219045.28609.50.camel@joe-AO722> Subject: Re: [PATCH] usb: storage: Add usb_stor_dbg, reduce object size From: Joe Perches To: Alan Stern Cc: Matthew Dharm , Greg Kroah-Hartman , linux-usb , usb-storage , LKML Date: Wed, 17 Apr 2013 10:17:25 -0700 In-Reply-To: References: Content-Type: text/plain; charset="ISO-8859-1" X-Mailer: Evolution 3.6.2-0ubuntu0.1 Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 171555 Lines: 4732 On Wed, 2013-04-17 at 11:06 -0400, Alan Stern wrote: > On Wed, 17 Apr 2013, Joe Perches wrote: > > > On Wed, 2013-04-17 at 10:14 -0400, Alan Stern wrote: > > > On Tue, 16 Apr 2013, Joe Perches wrote: > > > > Reduce the size of the objects by consolidating > > > > the duplicated USB_STORAGE into a single function. > > [] > > > Is there any reasonable way to change this so that US_DEBUGP gets > > > converted to a dev_dbg call instead of a printk call? Not including > > > the device identifier in the output can be a real problem if there are > > > multiple mass-storage devices in the system. > > > > No. > > > > There's no standardized name of a struct device *. > > struct us_data *us exists for most of them but not > > all. Some have a struct isd_200 *info available, > > other don't have a struct device * at all. > > > > Some or all US_DEBUGP calls would have to change > > form. > > > > Perhaps a good patch would be to convert US_DEBUGP > > calls where a struct us_data * is available to > > to us_stor_dbg(struct us_data *, const char *fmt, ...) > > That would be an excellent start. Hey Alan, care to try this? o Convert uses of US_DEBUGP to usb_stor_dbg o Add "struct us_data *" to usb_stor_dbg uses when available and NULL when not. o usb_stor_dbg now uses struct device */dev_vprint_emit when available o Removed embedded function names o Coalesce formats o Remove trailing whitespace o Remove useless OOM messages o Remove useless function entry/exit logging Compiles but completely untested. This won't apply against Greg's latest usb tree as he's just taken the previous patch. --- drivers/usb/storage/alauda.c | 103 ++++++------- drivers/usb/storage/cypress_atacb.c | 2 +- drivers/usb/storage/datafab.c | 59 ++++---- drivers/usb/storage/debug.c | 30 +++- drivers/usb/storage/debug.h | 15 +- drivers/usb/storage/ene_ub6250.c | 85 +++++------ drivers/usb/storage/freecom.c | 73 ++++----- drivers/usb/storage/initializers.c | 10 +- drivers/usb/storage/isd200.c | 292 ++++++++++++++++++------------------ drivers/usb/storage/jumpshot.c | 61 ++++---- drivers/usb/storage/karma.c | 6 +- drivers/usb/storage/option_ms.c | 23 +-- drivers/usb/storage/realtek_cr.c | 128 ++++++---------- drivers/usb/storage/scsiglue.c | 9 +- drivers/usb/storage/sddr09.c | 145 +++++++++--------- drivers/usb/storage/sddr55.c | 86 +++++------ drivers/usb/storage/shuttle_usbat.c | 109 +++++++------- drivers/usb/storage/sierra_ms.c | 37 ++--- drivers/usb/storage/transport.c | 179 +++++++++++----------- drivers/usb/storage/usb.c | 86 ++++------- 20 files changed, 742 insertions(+), 796 deletions(-) diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index be5564c..d1d19c8 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -326,8 +326,8 @@ static int alauda_get_media_status(struct us_data *us, unsigned char *data) rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, command, 0xc0, 0, 1, data, 2); - US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", - data[0], data[1]); + usb_stor_dbg(us, "Media status %02X %02X\n", + data[0], data[1]); return rc; } @@ -402,7 +402,7 @@ static int alauda_init_media(struct us_data *us) ready = 1; } - US_DEBUGP("alauda_init_media: We are ready for action!\n"); + usb_stor_dbg(us, "We are ready for action!\n"); if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -413,15 +413,15 @@ static int alauda_init_media(struct us_data *us) return USB_STOR_TRANSPORT_ERROR; if (data[0] != 0x14) { - US_DEBUGP("alauda_init_media: Media not ready after ack\n"); + usb_stor_dbg(us, "Media not ready after ack\n"); return USB_STOR_TRANSPORT_ERROR; } if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", - data[0], data[1], data[2], data[3]); + usb_stor_dbg(us, "Media signature: %02X %02X %02X %02X\n", + data[0], data[1], data[2], data[3]); media_info = alauda_card_find_id(data[1]); if (media_info == NULL) { printk(KERN_WARNING @@ -432,8 +432,8 @@ static int alauda_init_media(struct us_data *us) } MEDIA_INFO(us).capacity = 1 << media_info->chipshift; - US_DEBUGP("Found media with capacity: %ldMB\n", - MEDIA_INFO(us).capacity >> 20); + usb_stor_dbg(us, "Found media with capacity: %ldMB\n", + MEDIA_INFO(us).capacity >> 20); MEDIA_INFO(us).pageshift = media_info->pageshift; MEDIA_INFO(us).blockshift = media_info->blockshift; @@ -472,7 +472,7 @@ static int alauda_check_media(struct us_data *us) /* Check for no media or door open */ if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) || ((status[1] & 0x01) == 0)) { - US_DEBUGP("alauda_check_media: No media, or door open\n"); + usb_stor_dbg(us, "No media, or door open\n"); alauda_free_maps(&MEDIA_INFO(us)); info->sense_key = 0x02; info->sense_asc = 0x3A; @@ -482,7 +482,7 @@ static int alauda_check_media(struct us_data *us) /* Check for media change */ if (status[0] & 0x08) { - US_DEBUGP("alauda_check_media: Media change detected\n"); + usb_stor_dbg(us, "Media change detected\n"); alauda_free_maps(&MEDIA_INFO(us)); alauda_init_media(us); @@ -518,7 +518,7 @@ static int alauda_check_status2(struct us_data *us) if (rc != USB_STOR_XFER_GOOD) return rc; - US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); + usb_stor_dbg(us, "%02X %02X %02X\n", data[0], data[1], data[2]); if (data[0] & ALAUDA_STATUS_ERROR) return USB_STOR_XFER_ERROR; @@ -584,7 +584,7 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) goto error; } - US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); + usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone); /* 1024 PBA's per zone */ for (i = 0; i < zonesize; i++) @@ -604,7 +604,7 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) if (data[j] != 0) goto nonz; pba_to_lba[i] = UNUSABLE; - US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum); + usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum); continue; nonz: @@ -617,19 +617,18 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) nonff: /* normal PBAs start with six FFs */ if (j < 6) { - US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: " - "reserved area = %02X%02X%02X%02X " - "data status %02X block status %02X\n", - blocknum, data[0], data[1], data[2], data[3], - data[4], data[5]); + usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n", + blocknum, + data[0], data[1], data[2], data[3], + data[4], data[5]); pba_to_lba[i] = UNUSABLE; continue; } if ((data[6] >> 4) != 0x01) { - US_DEBUGP("alauda_read_map: PBA %d has invalid address " - "field %02X%02X/%02X%02X\n", - blocknum, data[6], data[7], data[11], data[12]); + usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n", + blocknum, data[6], data[7], + data[11], data[12]); pba_to_lba[i] = UNUSABLE; continue; } @@ -711,7 +710,7 @@ static int alauda_erase_block(struct us_data *us, u16 pba) }; unsigned char buf[2]; - US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba); + usb_stor_dbg(us, "Erasing PBA %d\n", pba); rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, command, 9, NULL); @@ -723,8 +722,7 @@ static int alauda_erase_block(struct us_data *us, u16 pba) if (rc != USB_STOR_XFER_GOOD) return rc; - US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n", - buf[0], buf[1]); + usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]); return rc; } @@ -741,8 +739,7 @@ static int alauda_read_block_raw(struct us_data *us, u16 pba, PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) }; - US_DEBUGP("alauda_read_block: pba %d page %d count %d\n", - pba, page, pages); + usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages); rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, command, 9, NULL); @@ -793,7 +790,7 @@ static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) }; - US_DEBUGP("alauda_write_block: pba %d\n", pba); + usb_stor_dbg(us, "pba %d\n", pba); rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, command, 9, NULL); @@ -866,14 +863,14 @@ static int alauda_write_lba(struct us_data *us, u16 lba, cptr = bptr + pagesize; nand_compute_ecc(bptr, ecc); if (!nand_compare_ecc(cptr+13, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", + i, pba); nand_store_ecc(cptr+13, ecc); } nand_compute_ecc(bptr + (pagesize / 2), ecc); if (!nand_compare_ecc(cptr+8, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", + i, pba); nand_store_ecc(cptr+8, ecc); } cptr[6] = cptr[11] = MSB_of(lbap); @@ -900,8 +897,7 @@ static int alauda_write_lba(struct us_data *us, u16 lba, new_pba_offset = new_pba - (zone * zonesize); MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; - US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n", - lba, new_pba); + usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba); if (pba != UNDEF) { unsigned int pba_offset = pba - (zone * zonesize); @@ -964,8 +960,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, /* Not overflowing capacity? */ if (lba >= max_lba) { - US_DEBUGP("Error: Requested lba %u exceeds " - "maximum %u\n", lba, max_lba); + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, max_lba); result = USB_STOR_TRANSPORT_ERROR; break; } @@ -978,8 +974,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; if (pba == UNDEF) { /* this lba was never written */ - US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", - pages, lba, page); + usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); /* This is not really an error. It just means that the block has never been written. @@ -988,9 +984,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, memset(buffer, 0, len); } else { - US_DEBUGP("Read %d pages, from PBA %d" - " (LBA %d) page %d\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", + pages, pba, lba, page); result = alauda_read_block(us, pba, page, pages, buffer); if (result != USB_STOR_TRANSPORT_GOOD) @@ -1066,8 +1061,8 @@ static int alauda_write_data(struct us_data *us, unsigned long address, /* Not overflowing capacity? */ if (lba >= max_lba) { - US_DEBUGP("alauda_write_data: Requested lba %u exceeds " - "maximum %u\n", lba, max_lba); + usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n", + lba, max_lba); result = USB_STOR_TRANSPORT_ERROR; break; } @@ -1122,11 +1117,9 @@ static int init_alauda(struct us_data *us) nand_init_ecc(); us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("init_alauda: Gah! Can't allocate storage for" - "alauda info struct!\n"); + if (!us->extra) return USB_STOR_TRANSPORT_ERROR; - } + info = (struct alauda_info *) us->extra; us->extra_destructor = alauda_info_destructor; @@ -1147,15 +1140,14 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) }; if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("alauda_transport: INQUIRY. " - "Returning bogus response.\n"); + usb_stor_dbg(us, "INQUIRY. Returning bogus response.\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); return alauda_check_media(us); } @@ -1193,8 +1185,8 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "READ_10: page %d pagect %d\n", + page, pages); return alauda_read_data(us, page, pages); } @@ -1211,14 +1203,13 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages); return alauda_write_data(us, page, pages); } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("alauda_transport: REQUEST_SENSE.\n"); + usb_stor_dbg(us, "REQUEST_SENSE\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; @@ -1237,8 +1228,8 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } - US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 070b5c0..e4efc7b 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -159,7 +159,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) if (srb->result == SAM_STAT_CHECK_CONDITION && memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB, sizeof(usb_stor_sense_invalidCDB)) == 0) { - US_DEBUGP("cypress atacb not supported ???\n"); + usb_stor_dbg(us, "cypress atacb not supported ???\n"); goto end; } diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 494fee5..638f6aa 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -123,7 +123,7 @@ datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("datafab_bulk_read: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL); } @@ -134,7 +134,7 @@ datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("datafab_bulk_write: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL); } @@ -300,9 +300,8 @@ static int datafab_write_data(struct us_data *us, goto leave; if (reply[0] != 0x50 && reply[1] != 0) { - US_DEBUGP("datafab_write_data: Gah! " - "write return code: %02x %02x\n", - reply[0], reply[1]); + usb_stor_dbg(us, "Gah! write return code: %02x %02x\n", + reply[0], reply[1]); result = USB_STOR_TRANSPORT_ERROR; goto leave; } @@ -342,7 +341,7 @@ static int datafab_determine_lun(struct us_data *us, if (!buf) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("datafab_determine_lun: locating...\n"); + usb_stor_dbg(us, "locating...\n"); // we'll try 3 times before giving up... // @@ -474,16 +473,16 @@ static int datafab_handle_mode_sense(struct us_data *us, switch (pc) { case 0x0: - US_DEBUGP("datafab_handle_mode_sense: Current values\n"); + usb_stor_dbg(us, "Current values\n"); break; case 0x1: - US_DEBUGP("datafab_handle_mode_sense: Changeable values\n"); + usb_stor_dbg(us, "Changeable values\n"); break; case 0x2: - US_DEBUGP("datafab_handle_mode_sense: Default values\n"); + usb_stor_dbg(us, "Default values\n"); break; case 0x3: - US_DEBUGP("datafab_handle_mode_sense: Saves values\n"); + usb_stor_dbg(us, "Saves values\n"); break; } @@ -566,11 +565,9 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) if (!us->extra) { us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("datafab_transport: Gah! " - "Can't allocate storage for Datafab info struct!\n"); + if (!us->extra) return USB_STOR_TRANSPORT_ERROR; - } + us->extra_destructor = datafab_info_destructor; ((struct datafab_info *)us->extra)->lun = -1; } @@ -578,7 +575,7 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) info = (struct datafab_info *) (us->extra); if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("datafab_transport: INQUIRY. Returning bogus response"); + usb_stor_dbg(us, "INQUIRY. Returning bogus response\n"); memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; @@ -590,8 +587,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("datafab_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", - info->sectors, info->ssize); + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); // build the reply // we need the last sector, not the number of sectors @@ -603,7 +600,7 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SELECT_10) { - US_DEBUGP("datafab_transport: Gah! MODE_SELECT_10.\n"); + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -615,7 +612,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("datafab_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); return datafab_read_data(us, info, block, blocks); } @@ -628,7 +626,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("datafab_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); return datafab_read_data(us, info, block, blocks); } @@ -638,7 +637,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("datafab_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); return datafab_write_data(us, info, block, blocks); } @@ -651,17 +651,18 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("datafab_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); return datafab_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("datafab_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); return datafab_id_device(us, info); } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("datafab_transport: REQUEST_SENSE. Returning faked response\n"); + usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n"); // this response is pretty bogus right now. eventually if necessary // we can set the correct sense data. so far though it hasn't been @@ -679,12 +680,12 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SENSE) { - US_DEBUGP("datafab_transport: MODE_SENSE_6 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); return datafab_handle_mode_sense(us, srb, 1); } if (srb->cmnd[0] == MODE_SENSE_10) { - US_DEBUGP("datafab_transport: MODE_SENSE_10 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); return datafab_handle_mode_sense(us, srb, 0); } @@ -698,7 +699,7 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) if (srb->cmnd[0] == START_STOP) { /* this is used by sd.c'check_scsidisk_media_change to detect media change */ - US_DEBUGP("datafab_transport: START_STOP.\n"); + usb_stor_dbg(us, "START_STOP\n"); /* the first datafab_id_device after a media change returns an error (determined experimentally) */ rc = datafab_id_device(us, info); @@ -712,8 +713,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) return rc; } - US_DEBUGP("datafab_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c index a2b5526..b96e3f2 100644 --- a/drivers/usb/storage/debug.c +++ b/drivers/usb/storage/debug.c @@ -42,11 +42,13 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include #include +#include "usb.h" #include "debug.h" #include "scsi.h" @@ -149,8 +151,8 @@ void usb_stor_show_command(struct scsi_cmnd *srb) case WRITE_LONG_2: what = "WRITE_LONG_2"; break; default: what = "(unknown command)"; break; } - US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len); - US_DEBUGP(""); + usb_stor_dbg(NULL, "Command %s (%d bytes)\n", what, srb->cmd_len); + usb_stor_dbg(NULL, "bytes: "); for (i = 0; i < srb->cmd_len && i < 16; i++) US_DEBUGPX(" %02x", srb->cmnd[i]); US_DEBUGPX("\n"); @@ -171,7 +173,29 @@ void usb_stor_show_sense( if (what == NULL) what = "(unknown ASC/ASCQ)"; - US_DEBUGP("%s: ", keystr); + usb_stor_dbg(NULL, "%s: ", keystr); US_DEBUGPX(what, ascq); US_DEBUGPX("\n"); } + +int usb_stor_dbg(const struct us_data *us, const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + int r; + + va_start(args, fmt); + + if (us && us->pusb_dev) { + r = dev_vprintk_emit(7, &us->pusb_dev->dev, fmt, args); + } else { + vaf.fmt = fmt; + vaf.va = &args; + + r = printk(KERN_DEBUG USB_STORAGE "%pV", &vaf); + } + + va_end(args); + + return r; +} diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h index dbb985d..8abfa1c 100644 --- a/drivers/usb/storage/debug.h +++ b/drivers/usb/storage/debug.h @@ -50,12 +50,17 @@ void usb_stor_show_command(struct scsi_cmnd *srb); void usb_stor_show_sense( unsigned char key, unsigned char asc, unsigned char ascq ); -#define US_DEBUGP(x...) printk( KERN_DEBUG USB_STORAGE x ) -#define US_DEBUGPX(x...) printk( x ) -#define US_DEBUG(x) x +__printf(2, 3) int usb_stor_dbg(const struct us_data *us, + const char *fmt, ...); + +#define US_DEBUGP(fmt, ...) usb_stor_dbg(NULL, fmt, ##__VA_ARGS__) +#define US_DEBUGPX(fmt, ...) printk(fmt, ##__VA_ARGS__) +#define US_DEBUG(x) x #else -#define US_DEBUGP(x...) -#define US_DEBUGPX(x...) +#define US_DEBUGP(fmt, ...) \ + do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) +#define US_DEBUGPX(fmt, ...) \ + do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) #define US_DEBUG(x) #endif diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 118b134..ff756c9 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -504,12 +504,12 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) unsigned int cswlen = 0, partial = 0; unsigned int transfer_length = bcb->DataTransferLength; - /* US_DEBUGP("transport --- ene_send_scsi_cmd\n"); */ + /* usb_stor_dbg(us, "transport --- ene_send_scsi_cmd\n"); */ /* send cmd to out endpoint */ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, US_BULK_CB_WRAP_LEN, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("send cmd to out endpoint fail ---\n"); + usb_stor_dbg(us, "send cmd to out endpoint fail ---\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -529,7 +529,7 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) transfer_length, 0, &partial); } if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("data transfer fail ---\n"); + usb_stor_dbg(us, "data transfer fail ---\n"); return USB_STOR_TRANSPORT_ERROR; } } @@ -539,14 +539,14 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) US_BULK_CS_WRAP_LEN, &cswlen); if (result == USB_STOR_XFER_SHORT && cswlen == 0) { - US_DEBUGP("Received 0-length CSW; retrying...\n"); + usb_stor_dbg(us, "Received 0-length CSW; retrying...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen); } if (result == USB_STOR_XFER_STALLED) { /* get the status again */ - US_DEBUGP("Attempting to get CSW (2nd try)...\n"); + usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, NULL); } @@ -626,7 +626,7 @@ static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) struct scatterlist *sg = NULL; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - US_DEBUGP("sd_scsi_read_capacity\n"); + usb_stor_dbg(us, "sd_scsi_read_capacity\n"); if (info->SD_Status.HiCapacity) { bl_len = 0x200; if (info->SD_Status.IsMMC) @@ -639,8 +639,8 @@ static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) * (1 << (info->SD_C_SIZE_MULT + 2)) - 1; } info->bl_num = bl_num; - US_DEBUGP("bl_len = %x\n", bl_len); - US_DEBUGP("bl_num = %x\n", bl_num); + usb_stor_dbg(us, "bl_len = %x\n", bl_len); + usb_stor_dbg(us, "bl_num = %x\n", bl_num); /*srb->request_bufflen = 8; */ buf[0] = (bl_num >> 24) & 0xff; @@ -675,7 +675,7 @@ static int sd_scsi_read(struct us_data *us, struct scsi_cmnd *srb) result = ene_load_bincode(us, SD_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD RW pattern Fail !!\n"); + usb_stor_dbg(us, "Load SD RW pattern Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -715,7 +715,7 @@ static int sd_scsi_write(struct us_data *us, struct scsi_cmnd *srb) result = ene_load_bincode(us, SD_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD RW pattern Fail !!\n"); + usb_stor_dbg(us, "Load SD RW pattern Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1493,7 +1493,7 @@ static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) struct scatterlist *sg = NULL; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - US_DEBUGP("ms_scsi_read_capacity\n"); + usb_stor_dbg(us, "ms_scsi_read_capacity\n"); bl_len = 0x200; if (info->MS_Status.IsMSPro) bl_num = info->MSP_TotalBlock - 1; @@ -1501,8 +1501,8 @@ static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1; info->bl_num = bl_num; - US_DEBUGP("bl_len = %x\n", bl_len); - US_DEBUGP("bl_num = %x\n", bl_num); + usb_stor_dbg(us, "bl_len = %x\n", bl_len); + usb_stor_dbg(us, "bl_num = %x\n", bl_num); /*srb->request_bufflen = 8; */ buf[0] = (bl_num >> 24) & 0xff; @@ -1654,7 +1654,7 @@ static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb) if (info->MS_Status.IsMSPro) { result = ene_load_bincode(us, MSP_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load MPS RW pattern Fail !!\n"); + usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1854,7 +1854,7 @@ static int ene_get_card_status(struct us_data *us, u8 *buf) u32 reg4b; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - /*US_DEBUGP("transport --- ENE_ReadSDReg\n");*/ + /*usb_stor_dbg(us, "transport --- ENE_ReadSDReg\n");*/ reg4b = *(u32 *)&buf[0x18]; info->SD_READ_BL_LEN = (u8)((reg4b >> 8) & 0x0f); @@ -1894,45 +1894,44 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) switch (flag) { /* For SD */ case SD_INIT1_PATTERN: - US_DEBUGP("SD_INIT1_PATTERN\n"); + usb_stor_dbg(us, "SD_INIT1_PATTERN\n"); fw_name = SD_INIT1_FIRMWARE; break; case SD_INIT2_PATTERN: - US_DEBUGP("SD_INIT2_PATTERN\n"); + usb_stor_dbg(us, "SD_INIT2_PATTERN\n"); fw_name = SD_INIT2_FIRMWARE; break; case SD_RW_PATTERN: - US_DEBUGP("SD_RW_PATTERN\n"); + usb_stor_dbg(us, "SD_RW_PATTERN\n"); fw_name = SD_RW_FIRMWARE; break; /* For MS */ case MS_INIT_PATTERN: - US_DEBUGP("MS_INIT_PATTERN\n"); + usb_stor_dbg(us, "MS_INIT_PATTERN\n"); fw_name = MS_INIT_FIRMWARE; break; case MSP_RW_PATTERN: - US_DEBUGP("MSP_RW_PATTERN\n"); + usb_stor_dbg(us, "MSP_RW_PATTERN\n"); fw_name = MSP_RW_FIRMWARE; break; case MS_RW_PATTERN: - US_DEBUGP("MS_RW_PATTERN\n"); + usb_stor_dbg(us, "MS_RW_PATTERN\n"); fw_name = MS_RW_FIRMWARE; break; default: - US_DEBUGP("----------- Unknown PATTERN ----------\n"); + usb_stor_dbg(us, "----------- Unknown PATTERN ----------\n"); goto nofw; } err = request_firmware(&sd_fw, fw_name, &us->pusb_dev->dev); if (err) { - US_DEBUGP("load firmware %s failed\n", fw_name); + usb_stor_dbg(us, "load firmware %s failed\n", fw_name); goto nofw; } buf = kmalloc(sd_fw->size, GFP_KERNEL); - if (buf == NULL) { - US_DEBUGP("Malloc memory for fireware failed!\n"); + if (buf == NULL) goto nofw; - } + memcpy(buf, sd_fw->data, sd_fw->size); memset(bcb, 0, sizeof(struct bulk_cb_wrap)); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); @@ -2116,9 +2115,9 @@ static int ene_ms_init(struct us_data *us) } else { ms_card_init(us); /* Card is MS (to ms.c)*/ } - US_DEBUGP("MS Init Code OK !!\n"); + usb_stor_dbg(us, "MS Init Code OK !!\n"); } else { - US_DEBUGP("MS Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]); return USB_STOR_TRANSPORT_ERROR; } @@ -2132,11 +2131,11 @@ static int ene_sd_init(struct us_data *us) struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - US_DEBUGP("transport --- ENE_SDInit\n"); + usb_stor_dbg(us, "transport --- ENE_SDInit\n"); /* SD Init Part-1 */ result = ene_load_bincode(us, SD_INIT1_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD Init Code Part-1 Fail !!\n"); + usb_stor_dbg(us, "Load SD Init Code Part-1 Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -2147,14 +2146,14 @@ static int ene_sd_init(struct us_data *us) result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Execution SD Init Code Fail !!\n"); + usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } /* SD Init Part-2 */ result = ene_load_bincode(us, SD_INIT2_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD Init Code Part-2 Fail !!\n"); + usb_stor_dbg(us, "Load SD Init Code Part-2 Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -2166,21 +2165,23 @@ static int ene_sd_init(struct us_data *us) result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Execution SD Init Code Fail !!\n"); + usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } info->SD_Status = *(struct SD_STATUS *)&buf[0]; if (info->SD_Status.Insert && info->SD_Status.Ready) { + struct SD_STATUS *s = &info->SD_Status; + ene_get_card_status(us, (unsigned char *)&buf); - US_DEBUGP("Insert = %x\n", info->SD_Status.Insert); - US_DEBUGP("Ready = %x\n", info->SD_Status.Ready); - US_DEBUGP("IsMMC = %x\n", info->SD_Status.IsMMC); - US_DEBUGP("HiCapacity = %x\n", info->SD_Status.HiCapacity); - US_DEBUGP("HiSpeed = %x\n", info->SD_Status.HiSpeed); - US_DEBUGP("WtP = %x\n", info->SD_Status.WtP); + usb_stor_dbg(us, "Insert = %x\n", s->Insert); + usb_stor_dbg(us, "Ready = %x\n", s->Ready); + usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC); + usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity); + usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed); + usb_stor_dbg(us, "WtP = %x\n", s->WtP); } else { - US_DEBUGP("SD Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]); return USB_STOR_TRANSPORT_ERROR; } return USB_STOR_TRANSPORT_GOOD; @@ -2362,7 +2363,7 @@ static int ene_ub6250_resume(struct usb_interface *iface) mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __func__); + usb_stor_dbg(us, "%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); @@ -2382,7 +2383,7 @@ static int ene_ub6250_reset_resume(struct usb_interface *iface) u8 tmp = 0; struct us_data *us = usb_get_intfdata(iface); struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); - US_DEBUGP("%s\n", __func__); + usb_stor_dbg(us, "%s\n", __func__); /* Report the reset to the SCSI core */ usb_stor_reset_resume(iface); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index e6df087..a46cd72 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -40,7 +40,7 @@ MODULE_AUTHOR("David Brown "); MODULE_LICENSE("GPL"); #ifdef CONFIG_USB_STORAGE_DEBUG -static void pdump (void *, int); +static void pdump(struct us_data *us, void *ibuffer, int length); #endif /* Bits of HD_STATUS */ @@ -161,7 +161,7 @@ freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, fxfr->Count = cpu_to_le32 (count); memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); - US_DEBUGP("Read data Freecom! (c=%d)\n", count); + usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count); /* Issue the transfer command. */ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, @@ -172,9 +172,9 @@ freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, } /* Now transfer all of our blocks. */ - US_DEBUGP("Start of read\n"); + usb_stor_dbg(us, "Start of read\n"); result = usb_stor_bulk_srb(us, ipipe, srb); - US_DEBUGP("freecom_readdata done!\n"); + usb_stor_dbg(us, "freecom_readdata done!\n"); if (result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; @@ -194,7 +194,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, fxfr->Count = cpu_to_le32 (count); memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); - US_DEBUGP("Write data Freecom! (c=%d)\n", count); + usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count); /* Issue the transfer command. */ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, @@ -205,10 +205,10 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, } /* Now transfer all of our blocks. */ - US_DEBUGP("Start of write\n"); + usb_stor_dbg(us, "Start of write\n"); result = usb_stor_bulk_srb(us, opipe, srb); - US_DEBUGP("freecom_writedata done!\n"); + usb_stor_dbg(us, "freecom_writedata done!\n"); if (result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_GOOD; @@ -230,7 +230,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) fcb = (struct freecom_cb_wrap *) us->iobuf; fst = (struct freecom_status *) us->iobuf; - US_DEBUGP("Freecom TRANSPORT STARTED\n"); + usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n"); /* Get handles for both transports. */ opipe = us->send_bulk_pipe; @@ -242,7 +242,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) memcpy (fcb->Atapi, srb->cmnd, 12); memset (fcb->Filler, 0, sizeof (fcb->Filler)); - US_DEBUG(pdump (srb->cmnd, 12)); + US_DEBUG(pdump(us, srb->cmnd, 12)); /* Send it out. */ result = usb_stor_bulk_transfer_buf (us, opipe, fcb, @@ -260,11 +260,11 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * doesn't hurt us to always do it now. */ result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_STATUS_PACKET_LENGTH, &partial); - US_DEBUGP("foo Status result %d %u\n", result, partial); + usb_stor_dbg(us, "foo Status result %d %u\n", result, partial); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUG(pdump ((void *) fst, partial)); + US_DEBUG(pdump(us, (void *)fst, partial)); /* The firmware will time-out commands after 20 seconds. Some commands * can legitimately take longer than this, so we use a different @@ -275,8 +275,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * may not work, but that is a condition that should never happen. */ while (fst->Status & FCM_STATUS_BUSY) { - US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occurred!\n"); - US_DEBUGP("fst->Status is %x\n", fst->Status); + usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n"); + usb_stor_dbg(us, "fst->Status is %x\n", fst->Status); /* Get the status again */ fcb->Type = FCM_PACKET_STATUS; @@ -301,26 +301,26 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_STATUS_PACKET_LENGTH, &partial); - US_DEBUGP("bar Status result %d %u\n", result, partial); + usb_stor_dbg(us, "bar Status result %d %u\n", result, partial); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUG(pdump ((void *) fst, partial)); + US_DEBUG(pdump(us, (void *)fst, partial)); } if (partial != 4) return USB_STOR_TRANSPORT_ERROR; if ((fst->Status & 1) != 0) { - US_DEBUGP("operation failed\n"); + usb_stor_dbg(us, "operation failed\n"); return USB_STOR_TRANSPORT_FAILED; } /* The device might not have as much data available as we * requested. If you ask for more than the device has, this reads * and such will hang. */ - US_DEBUGP("Device indicates that it has %d bytes available\n", - le16_to_cpu (fst->Count)); - US_DEBUGP("SCSI requested %d\n", scsi_bufflen(srb)); + usb_stor_dbg(us, "Device indicates that it has %d bytes available\n", + le16_to_cpu(fst->Count)); + usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb)); /* Find the length we desire to read. */ switch (srb->cmnd[0]) { @@ -337,7 +337,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* verify that this amount is legal */ if (length > scsi_bufflen(srb)) { length = scsi_bufflen(srb); - US_DEBUGP("Truncating request to match buffer length: %d\n", length); + usb_stor_dbg(us, "Truncating request to match buffer length: %d\n", + length); } /* What we do now depends on what direction the data is supposed to @@ -351,29 +352,29 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* Make sure that the status indicates that the device * wants data as well. */ if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) { - US_DEBUGP("SCSI wants data, drive doesn't have any\n"); + usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n"); return USB_STOR_TRANSPORT_FAILED; } result = freecom_readdata (srb, us, ipipe, opipe, length); if (result != USB_STOR_TRANSPORT_GOOD) return result; - US_DEBUGP("FCM: Waiting for status\n"); + usb_stor_dbg(us, "FCM: Waiting for status\n"); result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_PACKET_LENGTH, &partial); - US_DEBUG(pdump ((void *) fst, partial)); + US_DEBUG(pdump(us, (void *)fst, partial)); if (partial != 4 || result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; if ((fst->Status & ERR_STAT) != 0) { - US_DEBUGP("operation failed\n"); + usb_stor_dbg(us, "operation failed\n"); return USB_STOR_TRANSPORT_FAILED; } if ((fst->Reason & 3) != 3) { - US_DEBUGP("Drive seems still hungry\n"); + usb_stor_dbg(us, "Drive seems still hungry\n"); return USB_STOR_TRANSPORT_FAILED; } - US_DEBUGP("Transfer happy\n"); + usb_stor_dbg(us, "Transfer happy\n"); break; case DMA_TO_DEVICE: @@ -387,22 +388,22 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) if (result != USB_STOR_TRANSPORT_GOOD) return result; - US_DEBUGP("FCM: Waiting for status\n"); + usb_stor_dbg(us, "FCM: Waiting for status\n"); result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_PACKET_LENGTH, &partial); if (partial != 4 || result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; if ((fst->Status & ERR_STAT) != 0) { - US_DEBUGP("operation failed\n"); + usb_stor_dbg(us, "operation failed\n"); return USB_STOR_TRANSPORT_FAILED; } if ((fst->Reason & 3) != 3) { - US_DEBUGP("Drive seems still hungry\n"); + usb_stor_dbg(us, "Drive seems still hungry\n"); return USB_STOR_TRANSPORT_FAILED; } - US_DEBUGP("Transfer happy\n"); + usb_stor_dbg(us, "Transfer happy\n"); break; @@ -434,7 +435,7 @@ static int init_freecom(struct us_data *us) result = usb_stor_control_msg(us, us->recv_ctrl_pipe, 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ); buffer[32] = '\0'; - US_DEBUGP("String returned from FC init is: %s\n", buffer); + usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer); /* Special thanks to the people at Freecom for providing me with * this "magic sequence", which they use in their Windows and MacOS @@ -445,7 +446,7 @@ static int init_freecom(struct us_data *us) /* send reset */ result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ); - US_DEBUGP("result from activate reset is %d\n", result); + usb_stor_dbg(us, "result from activate reset is %d\n", result); /* wait 250ms */ mdelay(250); @@ -453,7 +454,7 @@ static int init_freecom(struct us_data *us) /* clear reset */ result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ); - US_DEBUGP("result from clear reset is %d\n", result); + usb_stor_dbg(us, "result from clear reset is %d\n", result); /* wait 3 seconds */ mdelay(3 * 1000); @@ -470,7 +471,7 @@ static int usb_stor_freecom_reset(struct us_data *us) } #ifdef CONFIG_USB_STORAGE_DEBUG -static void pdump (void *ibuffer, int length) +static void pdump(struct us_data *us, void *ibuffer, int length) { static char line[80]; int offset = 0; @@ -490,7 +491,7 @@ static void pdump (void *ibuffer, int length) line[offset++] = '.'; } line[offset] = 0; - US_DEBUGP("%s\n", line); + usb_stor_dbg(us, "%s\n", line); offset = 0; } offset += sprintf (line+offset, "%08x:", i); @@ -517,7 +518,7 @@ static void pdump (void *ibuffer, int length) line[offset++] = '.'; } line[offset] = 0; - US_DEBUGP("%s\n", line); + usb_stor_dbg(us, "%s\n", line); offset = 0; } #endif diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 105d900..5a8b5ff 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -48,12 +48,12 @@ int usb_stor_euscsi_init(struct us_data *us) { int result; - US_DEBUGP("Attempting to init eUSCSI bridge...\n"); + usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n"); us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, 0x01, 0x0, us->iobuf, 0x1, 5000); - US_DEBUGP("-- result is %d\n", result); + usb_stor_dbg(us, "-- result is %d\n", result); return 0; } @@ -68,7 +68,7 @@ int usb_stor_ucr61s2b_init(struct us_data *us) unsigned int partial; static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS"; - US_DEBUGP("Sending UCR-61S2B initialization packet...\n"); + usb_stor_dbg(us, "Sending UCR-61S2B initialization packet...\n"); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); bcb->Tag = 0; @@ -83,7 +83,7 @@ int usb_stor_ucr61s2b_init(struct us_data *us) if (res) return -EIO; - US_DEBUGP("Getting status packet...\n"); + usb_stor_dbg(us, "Getting status packet...\n"); res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &partial); if (res) @@ -101,6 +101,6 @@ int usb_stor_huawei_e220_init(struct us_data *us) USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE, 0x01, 0x0, NULL, 0x0, 1000); - US_DEBUGP("Huawei mode set result is %d\n", result); + usb_stor_dbg(us, "Huawei mode set result is %d\n", result); return 0; } diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 06a3d22..18dd713 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -503,7 +503,7 @@ static int isd200_action( struct us_data *us, int action, switch ( action ) { case ACTION_READ_STATUS: - US_DEBUGP(" isd200_action(READ_STATUS)\n"); + usb_stor_dbg(us, " isd200_action(READ_STATUS)\n"); ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; ata.generic.RegisterSelect = REG_CYLINDER_LOW | REG_CYLINDER_HIGH | @@ -512,7 +512,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_ENUM: - US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value); + usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4| ACTION_SELECT_5; @@ -522,7 +522,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_RESET: - US_DEBUGP(" isd200_action(RESET)\n"); + usb_stor_dbg(us, " isd200_action(RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; @@ -531,7 +531,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_REENABLE: - US_DEBUGP(" isd200_action(REENABLE)\n"); + usb_stor_dbg(us, " isd200_action(REENABLE)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; @@ -540,7 +540,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_SOFT_RESET: - US_DEBUGP(" isd200_action(SOFT_RESET)\n"); + usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; ata.write.DeviceHeadByte = info->DeviceHead; @@ -549,7 +549,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_IDENTIFY: - US_DEBUGP(" isd200_action(IDENTIFY)\n"); + usb_stor_dbg(us, " isd200_action(IDENTIFY)\n"); ata.generic.RegisterSelect = REG_COMMAND; ata.write.CommandByte = ATA_CMD_ID_ATA; isd200_set_srb(info, DMA_FROM_DEVICE, info->id, @@ -557,7 +557,7 @@ static int isd200_action( struct us_data *us, int action, break; default: - US_DEBUGP("Error: Undefined action %d\n",action); + usb_stor_dbg(us, "Error: Undefined action %d\n", action); return ISD200_ERROR; } @@ -567,7 +567,8 @@ static int isd200_action( struct us_data *us, int action, if (status == USB_STOR_TRANSPORT_GOOD) status = ISD200_GOOD; else { - US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status); + usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n", + action, status); status = ISD200_ERROR; /* need to reset device here */ } @@ -589,17 +590,17 @@ static int isd200_read_regs( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_IssueATAReadRegs\n"); + usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n"); transferStatus = isd200_action( us, ACTION_READ_STATUS, info->RegsBuf, sizeof(info->ATARegs) ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error reading ATA registers\n"); + usb_stor_dbg(us, " Error reading ATA registers\n"); retStatus = ISD200_ERROR; } else { memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); - US_DEBUGP(" Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", - info->ATARegs[ATA_REG_ERROR_OFFSET]); + usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", + info->ATARegs[ATA_REG_ERROR_OFFSET]); } return retStatus; @@ -629,7 +630,7 @@ static void isd200_invoke_transport( struct us_data *us, * short-circuit all other processing */ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- command was aborted\n"); + usb_stor_dbg(us, "-- command was aborted\n"); goto Handle_Abort; } @@ -641,23 +642,23 @@ static void isd200_invoke_transport( struct us_data *us, break; case USB_STOR_TRANSPORT_NO_SENSE: - US_DEBUGP("-- transport indicates protocol failure\n"); + usb_stor_dbg(us, "-- transport indicates protocol failure\n"); srb->result = SAM_STAT_CHECK_CONDITION; return; case USB_STOR_TRANSPORT_FAILED: - US_DEBUGP("-- transport indicates command failure\n"); + usb_stor_dbg(us, "-- transport indicates command failure\n"); need_auto_sense = 1; break; case USB_STOR_TRANSPORT_ERROR: - US_DEBUGP("-- transport indicates transport error\n"); + usb_stor_dbg(us, "-- transport indicates transport error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; default: - US_DEBUGP("-- transport indicates unknown error\n"); + usb_stor_dbg(us, "-- transport indicates unknown error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; @@ -669,14 +670,14 @@ static void isd200_invoke_transport( struct us_data *us, (srb->cmnd[0] == MODE_SENSE) || (srb->cmnd[0] == LOG_SENSE) || (srb->cmnd[0] == MODE_SENSE_10))) { - US_DEBUGP("-- unexpectedly short transfer\n"); + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); need_auto_sense = 1; } if (need_auto_sense) { result = isd200_read_regs(us); if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- auto-sense aborted\n"); + usb_stor_dbg(us, "-- auto-sense aborted\n"); goto Handle_Abort; } if (result == ISD200_GOOD) { @@ -710,40 +711,40 @@ static void isd200_invoke_transport( struct us_data *us, } #ifdef CONFIG_USB_STORAGE_DEBUG -static void isd200_log_config( struct isd200_info* info ) +static void isd200_log_config(struct us_data *us, struct isd200_info *info) { - US_DEBUGP(" Event Notification: 0x%x\n", - info->ConfigData.EventNotification); - US_DEBUGP(" External Clock: 0x%x\n", - info->ConfigData.ExternalClock); - US_DEBUGP(" ATA Init Timeout: 0x%x\n", - info->ConfigData.ATAInitTimeout); - US_DEBUGP(" ATAPI Command Block Size: 0x%x\n", - (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); - US_DEBUGP(" Master/Slave Selection: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_MASTER); - US_DEBUGP(" ATAPI Reset: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); - US_DEBUGP(" ATA Timing: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_TIMING); - US_DEBUGP(" ATA Major Command: 0x%x\n", - info->ConfigData.ATAMajorCommand); - US_DEBUGP(" ATA Minor Command: 0x%x\n", - info->ConfigData.ATAMinorCommand); - US_DEBUGP(" Init Status: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); - US_DEBUGP(" Config Descriptor 2: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); - US_DEBUGP(" Skip Device Boot: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); - US_DEBUGP(" ATA 3 State Supsend: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); - US_DEBUGP(" Descriptor Override: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); - US_DEBUGP(" Last LUN Identifier: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); - US_DEBUGP(" SRST Enable: 0x%x\n", - info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); + usb_stor_dbg(us, " Event Notification: 0x%x\n", + info->ConfigData.EventNotification); + usb_stor_dbg(us, " External Clock: 0x%x\n", + info->ConfigData.ExternalClock); + usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n", + info->ConfigData.ATAInitTimeout); + usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n", + (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); + usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_MASTER); + usb_stor_dbg(us, " ATAPI Reset: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); + usb_stor_dbg(us, " ATA Timing: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_TIMING); + usb_stor_dbg(us, " ATA Major Command: 0x%x\n", + info->ConfigData.ATAMajorCommand); + usb_stor_dbg(us, " ATA Minor Command: 0x%x\n", + info->ConfigData.ATAMinorCommand); + usb_stor_dbg(us, " Init Status: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); + usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); + usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); + usb_stor_dbg(us, " ATA 3 State Supsend: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); + usb_stor_dbg(us, " Descriptor Override: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); + usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); + usb_stor_dbg(us, " SRST Enable: 0x%x\n", + info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); } #endif @@ -762,9 +763,9 @@ static int isd200_write_config( struct us_data *us ) int result; #ifdef CONFIG_USB_STORAGE_DEBUG - US_DEBUGP("Entering isd200_write_config\n"); - US_DEBUGP(" Writing the following ISD200 Config Data:\n"); - isd200_log_config(info); + usb_stor_dbg(us, "Entering isd200_write_config\n"); + usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n"); + isd200_log_config(us, info); #endif /* let's send the command via the control pipe */ @@ -779,13 +780,13 @@ static int isd200_write_config( struct us_data *us ) sizeof(info->ConfigData)); if (result >= 0) { - US_DEBUGP(" ISD200 Config Data was written successfully\n"); + usb_stor_dbg(us, " ISD200 Config Data was written successfully\n"); } else { - US_DEBUGP(" Request to write ISD200 Config Data failed!\n"); + usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus); return retStatus; } @@ -804,7 +805,7 @@ static int isd200_read_config( struct us_data *us ) int retStatus = ISD200_GOOD; int result; - US_DEBUGP("Entering isd200_read_config\n"); + usb_stor_dbg(us, "Entering isd200_read_config\n"); /* read the configuration information from ISD200. Use this to */ /* determine what the special ATA CDB bytes are. */ @@ -821,16 +822,16 @@ static int isd200_read_config( struct us_data *us ) if (result >= 0) { - US_DEBUGP(" Retrieved the following ISD200 Config Data:\n"); + usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n"); #ifdef CONFIG_USB_STORAGE_DEBUG - isd200_log_config(info); + isd200_log_config(us, info); #endif } else { - US_DEBUGP(" Request to get ISD200 Config Data failed!\n"); + usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus); return retStatus; } @@ -848,15 +849,15 @@ static int isd200_atapi_soft_reset( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_atapi_soft_reset\n"); + usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n"); transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error issuing Atapi Soft Reset\n"); + usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus); return retStatus; } @@ -874,13 +875,13 @@ static int isd200_srst( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_SRST\n"); + usb_stor_dbg(us, "Entering isd200_SRST\n"); transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); /* check to see if this request failed */ if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error issuing SRST\n"); + usb_stor_dbg(us, " Error issuing SRST\n"); retStatus = ISD200_ERROR; } else { /* delay 10ms to give the drive a chance to see it */ @@ -888,7 +889,7 @@ static int isd200_srst( struct us_data *us ) transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error taking drive out of reset\n"); + usb_stor_dbg(us, " Error taking drive out of reset\n"); retStatus = ISD200_ERROR; } else { /* delay 50ms to give the drive a chance to recover after SRST */ @@ -896,7 +897,7 @@ static int isd200_srst( struct us_data *us ) } } - US_DEBUGP("Leaving isd200_srst %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus); return retStatus; } @@ -926,10 +927,6 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, /* loop until we detect !BSY or timeout */ while(1) { -#ifdef CONFIG_USB_STORAGE_DEBUG - char* mstr = master_slave == ATA_ADDRESS_DEVHEAD_STD ? - "Master" : "Slave"; -#endif status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); if ( status != ISD200_GOOD ) @@ -942,9 +939,13 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, if (!detect) { if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { - US_DEBUGP(" %s status is still BSY, try again...\n",mstr); + usb_stor_dbg(us, " %s status is still BSY, try again...\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); } else { - US_DEBUGP(" %s status !BSY, continue with next operation\n",mstr); + usb_stor_dbg(us, " %s status !BSY, continue with next operation\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); break; } } @@ -953,11 +954,11 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, /* ATA_ERR (workaround for Archos CD-ROM) */ else if (regs[ATA_REG_STATUS_OFFSET] & (ATA_BUSY | ATA_DF | ATA_ERR)) { - US_DEBUGP(" Status indicates it is not ready, try again...\n"); + usb_stor_dbg(us, " Status indicates it is not ready, try again...\n"); } /* check for DRDY, ATA devices set DRDY after SRST */ else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { - US_DEBUGP(" Identified ATA device\n"); + usb_stor_dbg(us, " Identified ATA device\n"); info->DeviceFlags |= DF_ATA_DEVICE; info->DeviceHead = master_slave; break; @@ -978,27 +979,27 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, */ if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && !recheckAsMaster) { - US_DEBUGP(" Identified ATAPI device as slave. Rechecking again as master\n"); + usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n"); recheckAsMaster = 1; master_slave = ATA_ADDRESS_DEVHEAD_STD; } else { - US_DEBUGP(" Identified ATAPI device\n"); + usb_stor_dbg(us, " Identified ATAPI device\n"); info->DeviceHead = master_slave; status = isd200_atapi_soft_reset(us); break; } } else { - US_DEBUGP(" Not ATA, not ATAPI. Weird.\n"); + usb_stor_dbg(us, " Not ATA, not ATAPI. Weird.\n"); break; } /* check for timeout on this request */ if (time_after_eq(jiffies, endTime)) { if (!detect) - US_DEBUGP(" BSY check timeout, just continue with next operation...\n"); + usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n"); else - US_DEBUGP(" Device detect timeout!\n"); + usb_stor_dbg(us, " Device detect timeout!\n"); break; } } @@ -1020,7 +1021,7 @@ static int isd200_manual_enum(struct us_data *us) struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; - US_DEBUGP("Entering isd200_manual_enum\n"); + usb_stor_dbg(us, "Entering isd200_manual_enum\n"); retStatus = isd200_read_config(us); if (retStatus == ISD200_GOOD) { @@ -1039,14 +1040,15 @@ static int isd200_manual_enum(struct us_data *us) isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { - US_DEBUGP(" Setting Master/Slave selection to %d\n", isslave); + usb_stor_dbg(us, " Setting Master/Slave selection to %d\n", + isslave); info->ConfigData.ATAConfig &= 0x3f; info->ConfigData.ATAConfig |= (isslave<<6); retStatus = isd200_write_config(us); } } - US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus); return(retStatus); } @@ -1064,35 +1066,35 @@ static void isd200_fix_driveid(u16 *id) #endif } -static void isd200_dump_driveid(u16 *id) +static void isd200_dump_driveid(struct us_data *us, u16 *id) { - US_DEBUGP(" Identify Data Structure:\n"); - US_DEBUGP(" config = 0x%x\n", id[ATA_ID_CONFIG]); - US_DEBUGP(" cyls = 0x%x\n", id[ATA_ID_CYLS]); - US_DEBUGP(" heads = 0x%x\n", id[ATA_ID_HEADS]); - US_DEBUGP(" track_bytes = 0x%x\n", id[4]); - US_DEBUGP(" sector_bytes = 0x%x\n", id[5]); - US_DEBUGP(" sectors = 0x%x\n", id[ATA_ID_SECTORS]); - US_DEBUGP(" serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); - US_DEBUGP(" buf_type = 0x%x\n", id[20]); - US_DEBUGP(" buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); - US_DEBUGP(" ecc_bytes = 0x%x\n", id[22]); - US_DEBUGP(" fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); - US_DEBUGP(" model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); - US_DEBUGP(" max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); - US_DEBUGP(" dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); - US_DEBUGP(" capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); - US_DEBUGP(" tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); - US_DEBUGP(" tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); - US_DEBUGP(" field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); - US_DEBUGP(" cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); - US_DEBUGP(" cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); - US_DEBUGP(" cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); - US_DEBUGP(" cur_capacity = 0x%x\n", ata_id_u32(id, 57)); - US_DEBUGP(" multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); - US_DEBUGP(" lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); - US_DEBUGP(" command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); - US_DEBUGP(" command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); + usb_stor_dbg(us, " Identify Data Structure:\n"); + usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]); + usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]); + usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]); + usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]); + usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]); + usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]); + usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); + usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]); + usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); + usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]); + usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); + usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); + usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); + usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); + usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); + usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); + usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); + usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); + usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); + usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); + usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); + usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57)); + usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); + usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); + usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); + usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); } /************************************************************************** @@ -1109,7 +1111,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) int retStatus = ISD200_GOOD; u16 *id = info->id; - US_DEBUGP("Entering isd200_get_inquiry_data\n"); + usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n"); /* set default to Master */ info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; @@ -1127,7 +1129,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) id, ATA_ID_WORDS * 2); if (transferStatus != ISD200_TRANSPORT_GOOD) { /* Error issuing ATA Command Identify */ - US_DEBUGP(" Error issuing ATA Command Identify\n"); + usb_stor_dbg(us, " Error issuing ATA Command Identify\n"); retStatus = ISD200_ERROR; } else { /* ATA Command Identify successful */ @@ -1136,7 +1138,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) __u16 *dest; isd200_fix_driveid(id); - isd200_dump_driveid(id); + isd200_dump_driveid(us, id); memset(&info->InquiryData, 0, sizeof(info->InquiryData)); @@ -1170,7 +1172,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) /* determine if it supports Media Status Notification */ if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) { - US_DEBUGP(" Device supports Media Status Notification\n"); + usb_stor_dbg(us, " Device supports Media Status Notification\n"); /* Indicate that it is enabled, even though it is not * This allows the lock/unlock of the media to work @@ -1190,7 +1192,8 @@ static int isd200_get_inquiry_data( struct us_data *us ) us->protocol_name = "Transparent SCSI"; us->proto_handler = usb_stor_transparent_scsi_command; - US_DEBUGP("Protocol changed to: %s\n", us->protocol_name); + usb_stor_dbg(us, "Protocol changed to: %s\n", + us->protocol_name); /* Free driver structure */ us->extra_destructor(info); @@ -1200,7 +1203,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) } } - US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus); return(retStatus); } @@ -1231,7 +1234,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, /* SCSI Command */ switch (srb->cmnd[0]) { case INQUIRY: - US_DEBUGP(" ATA OUT - INQUIRY\n"); + usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); /* copy InquiryData */ usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, @@ -1241,7 +1244,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case MODE_SENSE: - US_DEBUGP(" ATA OUT - SCSIOP_MODE_SENSE\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n"); /* Initialize the return buffer */ usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); @@ -1255,14 +1258,14 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Media Status not supported, just report okay\n"); + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case TEST_UNIT_READY: - US_DEBUGP(" ATA OUT - SCSIOP_TEST_UNIT_READY\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n"); if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) { @@ -1273,7 +1276,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Media Status not supported, just report okay\n"); + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } @@ -1284,7 +1287,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, unsigned long capacity; struct read_capacity_data readCapacityData; - US_DEBUGP(" ATA OUT - SCSIOP_READ_CAPACITY\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n"); if (ata_id_has_lba(id)) capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1; @@ -1303,7 +1306,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case READ_10: - US_DEBUGP(" ATA OUT - SCSIOP_READ\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; @@ -1335,7 +1338,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case WRITE_10: - US_DEBUGP(" ATA OUT - SCSIOP_WRITE\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; @@ -1367,10 +1370,11 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case ALLOW_MEDIUM_REMOVAL: - US_DEBUGP(" ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { - US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", + srb->cmnd[4]); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; @@ -1380,25 +1384,25 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Not removeable media, just report okay\n"); + usb_stor_dbg(us, " Not removeable media, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case START_STOP: - US_DEBUGP(" ATA OUT - SCSIOP_START_STOP_UNIT\n"); - US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n"); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); if ((srb->cmnd[4] & 0x3) == 0x2) { - US_DEBUGP(" Media Eject\n"); + usb_stor_dbg(us, " Media Eject\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 0; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; } else if ((srb->cmnd[4] & 0x3) == 0x1) { - US_DEBUGP(" Get Media Status\n"); + usb_stor_dbg(us, " Get Media Status\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; @@ -1406,14 +1410,15 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Nothing to do, just report okay\n"); + usb_stor_dbg(us, " Nothing to do, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; default: - US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]); + usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n", + srb->cmnd[0]); srb->result = DID_ERROR << 16; sendToTransport = 0; break; @@ -1470,8 +1475,7 @@ static int isd200_init_info(struct us_data *us) if (retStatus == ISD200_GOOD) { us->extra = info; us->extra_destructor = isd200_free_info_ptrs; - } else - US_DEBUGP("ERROR - kmalloc failure\n"); + } return retStatus; } @@ -1482,19 +1486,19 @@ static int isd200_init_info(struct us_data *us) static int isd200_Initialization(struct us_data *us) { - US_DEBUGP("ISD200 Initialization...\n"); + usb_stor_dbg(us, "ISD200 Initialization...\n"); /* Initialize ISD200 info struct */ if (isd200_init_info(us) == ISD200_ERROR) { - US_DEBUGP("ERROR Initializing ISD200 Info struct\n"); + usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n"); } else { /* Get device specific data */ if (isd200_get_inquiry_data(us) != ISD200_GOOD) - US_DEBUGP("ISD200 Initialization Failure\n"); + usb_stor_dbg(us, "ISD200 Initialization Failure\n"); else - US_DEBUGP("ISD200 Initialization complete\n"); + usb_stor_dbg(us, "ISD200 Initialization complete\n"); } return 0; @@ -1519,7 +1523,7 @@ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) /* Make sure driver was initialized */ if (us->extra == NULL) - US_DEBUGP("ERROR Driver not initialized\n"); + usb_stor_dbg(us, "ERROR Driver not initialized\n"); scsi_set_resid(srb, 0); /* scsi_bufflen might change in protocol translation to ata */ diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index ddc7878..2b36f1f 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -118,7 +118,7 @@ static inline int jumpshot_bulk_read(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("jumpshot_bulk_read: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL); } @@ -131,7 +131,7 @@ static inline int jumpshot_bulk_write(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("jumpshot_bulk_write: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL); } @@ -152,8 +152,7 @@ static int jumpshot_get_status(struct us_data *us) return USB_STOR_TRANSPORT_ERROR; if (us->iobuf[0] != 0x50) { - US_DEBUGP("jumpshot_get_status: 0x%2x\n", - us->iobuf[0]); + usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]); return USB_STOR_TRANSPORT_ERROR; } @@ -218,7 +217,7 @@ static int jumpshot_read_data(struct us_data *us, if (result != USB_STOR_XFER_GOOD) goto leave; - US_DEBUGP("jumpshot_read_data: %d bytes\n", len); + usb_stor_dbg(us, "%d bytes\n", len); // Store the data in the transfer buffer usb_stor_access_xfer_buf(buffer, len, us->srb, @@ -314,7 +313,7 @@ static int jumpshot_write_data(struct us_data *us, } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10)); if (result != USB_STOR_TRANSPORT_GOOD) - US_DEBUGP("jumpshot_write_data: Gah! Waitcount = 10. Bad write!?\n"); + usb_stor_dbg(us, "Gah! Waitcount = 10. Bad write!?\n"); sector += thistime; totallen -= len; @@ -349,8 +348,7 @@ static int jumpshot_id_device(struct us_data *us, 0, 0x20, 0, 6, command, 2); if (rc != USB_STOR_XFER_GOOD) { - US_DEBUGP("jumpshot_id_device: Gah! " - "send_control for read_capacity failed\n"); + usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n"); rc = USB_STOR_TRANSPORT_ERROR; goto leave; } @@ -400,16 +398,16 @@ static int jumpshot_handle_mode_sense(struct us_data *us, switch (pc) { case 0x0: - US_DEBUGP("jumpshot_handle_mode_sense: Current values\n"); + usb_stor_dbg(us, "Current values\n"); break; case 0x1: - US_DEBUGP("jumpshot_handle_mode_sense: Changeable values\n"); + usb_stor_dbg(us, "Changeable values\n"); break; case 0x2: - US_DEBUGP("jumpshot_handle_mode_sense: Default values\n"); + usb_stor_dbg(us, "Default values\n"); break; case 0x3: - US_DEBUGP("jumpshot_handle_mode_sense: Saves values\n"); + usb_stor_dbg(us, "Saves values\n"); break; } @@ -494,17 +492,16 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) if (!us->extra) { us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("jumpshot_transport: Gah! Can't allocate storage for jumpshot info struct!\n"); + if (!us->extra) return USB_STOR_TRANSPORT_ERROR; - } + us->extra_destructor = jumpshot_info_destructor; } info = (struct jumpshot_info *) (us->extra); if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("jumpshot_transport: INQUIRY. Returning bogus response.\n"); + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; @@ -521,8 +518,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("jumpshot_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", - info->sectors, info->ssize); + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); // build the reply // @@ -534,7 +531,7 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SELECT_10) { - US_DEBUGP("jumpshot_transport: Gah! MODE_SELECT_10.\n"); + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -544,7 +541,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("jumpshot_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); return jumpshot_read_data(us, info, block, blocks); } @@ -557,7 +555,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("jumpshot_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); return jumpshot_read_data(us, info, block, blocks); } @@ -567,7 +566,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("jumpshot_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); return jumpshot_write_data(us, info, block, blocks); } @@ -580,18 +580,19 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("jumpshot_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); return jumpshot_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("jumpshot_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); return jumpshot_get_status(us); } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("jumpshot_transport: REQUEST_SENSE.\n"); + usb_stor_dbg(us, "REQUEST_SENSE\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; @@ -605,12 +606,12 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SENSE) { - US_DEBUGP("jumpshot_transport: MODE_SENSE_6 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); return jumpshot_handle_mode_sense(us, srb, 1); } if (srb->cmnd[0] == MODE_SENSE_10) { - US_DEBUGP("jumpshot_transport: MODE_SENSE_10 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); return jumpshot_handle_mode_sense(us, srb, 0); } @@ -624,7 +625,7 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) if (srb->cmnd[0] == START_STOP) { /* this is used by sd.c'check_scsidisk_media_change to detect media change */ - US_DEBUGP("jumpshot_transport: START_STOP.\n"); + usb_stor_dbg(us, "START_STOP\n"); /* the first jumpshot_id_device after a media change returns an error (determined experimentally) */ rc = jumpshot_id_device(us, info); @@ -638,8 +639,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) return rc; } - US_DEBUGP("jumpshot_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index f085ffb..94d16ee 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -106,7 +106,7 @@ static int rio_karma_send_command(char cmd, struct us_data *us) static unsigned char seq = 1; struct karma_data *data = (struct karma_data *) us->extra; - US_DEBUGP("karma: sending command %04x\n", cmd); + usb_stor_dbg(us, "sending command %04x\n", cmd); memset(us->iobuf, 0, RIO_SEND_LEN); memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN); us->iobuf[5] = cmd; @@ -139,10 +139,10 @@ static int rio_karma_send_command(char cmd, struct us_data *us) if (seq == 0) seq = 1; - US_DEBUGP("karma: sent command %04x\n", cmd); + usb_stor_dbg(us, "sent command %04x\n", cmd); return 0; err: - US_DEBUGP("karma: command %04x failed\n", cmd); + usb_stor_dbg(us, "command %04x failed\n", cmd); return USB_STOR_TRANSPORT_FAILED; } diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c index e0f76bb..b2b35b1 100644 --- a/drivers/usb/storage/option_ms.c +++ b/drivers/usb/storage/option_ms.c @@ -50,7 +50,7 @@ static int option_rezero(struct us_data *us) char *buffer; int result; - US_DEBUGP("Option MS: %s", "DEVICE MODE SWITCH\n"); + usb_stor_dbg(us, "Option MS: %s\n", "DEVICE MODE SWITCH"); buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL); if (buffer == NULL) @@ -95,7 +95,7 @@ static int option_inquiry(struct us_data *us) char *buffer; int result; - US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n"); + usb_stor_dbg(us, "Option MS: %s\n", "device inquiry for vendor name"); buffer = kzalloc(0x24, GFP_KERNEL); if (buffer == NULL) @@ -138,31 +138,32 @@ int option_ms_init(struct us_data *us) { int result; - US_DEBUGP("Option MS: option_ms_init called\n"); + usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called"); /* Additional test for vendor information via INQUIRY, * because some vendor/product IDs are ambiguous */ result = option_inquiry(us); if (result != 0) { - US_DEBUGP("Option MS: vendor is not Option or not determinable," - " no action taken\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "vendor is not Option or not determinable, no action taken"); return 0; } else - US_DEBUGP("Option MS: this is a genuine Option device," - " proceeding\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "this is a genuine Option device, proceeding"); /* Force Modem mode */ if (option_zero_cd == ZCD_FORCE_MODEM) { - US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n"); + usb_stor_dbg(us, "Option MS: %s\n", "Forcing Modem Mode"); result = option_rezero(us); if (result != USB_STOR_XFER_GOOD) - US_DEBUGP("Option MS: Failed to switch to modem mode.\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "Failed to switch to modem mode"); return -EIO; } else if (option_zero_cd == ZCD_ALLOW_MS) { /* Allow Mass Storage mode (keep CD-Rom) */ - US_DEBUGP("Option MS: %s", "Allowing Mass Storage Mode if device" - " requests it\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "Allowing Mass Storage Mode if device requests it"); } return 0; diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 6c3586a..95dd4a7 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -254,8 +254,8 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun, /* check bulk status */ if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) { - US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", - le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN); + usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN); return USB_STOR_TRANSPORT_ERROR; } @@ -351,8 +351,8 @@ static int rts51x_get_max_lun(struct us_data *us) USB_RECIP_INTERFACE, 0, us->ifnum, us->iobuf, 1, 10 * HZ); - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); + usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); /* if we have a successful request, return the result */ if (result > 0) @@ -371,7 +371,7 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) if (buf == NULL) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); + usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); cmnd[0] = 0xF0; cmnd[1] = 0x0D; @@ -402,7 +402,7 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) if (buf == NULL) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); + usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); cmnd[0] = 0xF0; cmnd[1] = 0x0E; @@ -431,7 +431,7 @@ static int rts51x_read_status(struct us_data *us, if (buf == NULL) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("%s, lun = %d\n", __func__, lun); + usb_stor_dbg(us, "lun = %d\n", lun); cmnd[0] = 0xF0; cmnd[1] = 0x09; @@ -458,7 +458,7 @@ static int rts51x_check_status(struct us_data *us, u8 lun) if (retval != STATUS_SUCCESS) return -EIO; - US_DEBUGP("chip->status_len = %d\n", chip->status_len); + usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len); chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1]; chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3]; @@ -509,7 +509,7 @@ static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len) u8 cmnd[12] = {0}; u8 *buf; - US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len); + usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len); buf = kmemdup(data, len, GFP_NOIO); if (!buf) @@ -549,7 +549,7 @@ static int do_config_autodelink(struct us_data *us, int enable, int force) value &= ~0x03; } - US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value); + usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value); /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ retval = __do_config_autodelink(us, &value, 1); @@ -565,8 +565,6 @@ static int config_autodelink_after_power_on(struct us_data *us) int retval; u8 value; - US_DEBUGP("%s: <---\n", __func__); - if (!CHK_AUTO_DELINK(chip)) return 0; @@ -624,8 +622,6 @@ static int config_autodelink_after_power_on(struct us_data *us) } } - US_DEBUGP("%s: --->\n", __func__); - return 0; } @@ -635,8 +631,6 @@ static int config_autodelink_before_power_down(struct us_data *us) int retval; u8 value; - US_DEBUGP("%s: <---\n", __func__); - if (!CHK_AUTO_DELINK(chip)) return 0; @@ -698,8 +692,6 @@ static int config_autodelink_before_power_down(struct us_data *us) } } - US_DEBUGP("%s: --->\n", __func__); - return 0; } @@ -709,23 +701,19 @@ static void fw5895_init(struct us_data *us) int retval; u8 val; - US_DEBUGP("%s: <---\n", __func__); - if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { - US_DEBUGP("Not the specified device, return immediately!\n"); + usb_stor_dbg(us, "Not the specified device, return immediately!\n"); } else { retval = rts51x_read_mem(us, 0xFD6F, &val, 1); if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) { val = 0x1F; retval = rts51x_write_mem(us, 0xFD70, &val, 1); if (retval != STATUS_SUCCESS) - US_DEBUGP("Write memory fail\n"); + usb_stor_dbg(us, "Write memory fail\n"); } else { - US_DEBUGP("Read memory fail, OR (val & 0x1F) != 0\n"); + usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n"); } } - - US_DEBUGP("%s: --->\n", __func__); } #ifdef CONFIG_REALTEK_AUTOPM @@ -735,10 +723,8 @@ static void fw5895_set_mmc_wp(struct us_data *us) int retval; u8 buf[13]; - US_DEBUGP("%s: <---\n", __func__); - if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { - US_DEBUGP("Not the specified device, return immediately!\n"); + usb_stor_dbg(us, "Not the specified device, return immediately!\n"); } else { retval = rts51x_read_mem(us, 0xFD6F, buf, 1); if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) { @@ -748,26 +734,24 @@ static void fw5895_set_mmc_wp(struct us_data *us) buf[0] |= 0x04; retval = rts51x_write_mem(us, 0xFD70, buf, 1); if (retval != STATUS_SUCCESS) - US_DEBUGP("Write memory fail\n"); + usb_stor_dbg(us, "Write memory fail\n"); } else { - US_DEBUGP("Read memory fail\n"); + usb_stor_dbg(us, "Read memory fail\n"); } } else { - US_DEBUGP("Read memory fail, OR (buf[0]&0x24)!=0x24\n"); + usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n"); } } - - US_DEBUGP("%s: --->\n", __func__); } static void rts51x_modi_suspend_timer(struct rts51x_chip *chip) { - US_DEBUGP("%s: <---, state:%d\n", __func__, rts51x_get_stat(chip)); + struct us_data *us = chip->us; + + usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay); mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires); - - US_DEBUGP("%s: --->\n", __func__); } static void rts51x_suspend_timer_fn(unsigned long data) @@ -775,8 +759,6 @@ static void rts51x_suspend_timer_fn(unsigned long data) struct rts51x_chip *chip = (struct rts51x_chip *)data; struct us_data *us = chip->us; - US_DEBUGP("%s: <---\n", __func__); - switch (rts51x_get_stat(chip)) { case RTS51X_STAT_INIT: case RTS51X_STAT_RUN: @@ -784,32 +766,25 @@ static void rts51x_suspend_timer_fn(unsigned long data) break; case RTS51X_STAT_IDLE: case RTS51X_STAT_SS: - US_DEBUGP("%s: RTS51X_STAT_SS, intf->pm_usage_cnt:%d," - "power.usage:%d\n", __func__, - atomic_read(&us->pusb_intf->pm_usage_cnt), - atomic_read(&us->pusb_intf->dev.power.usage_count)); + usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { - US_DEBUGP("%s: Ready to enter SS state.\n", - __func__); + usb_stor_dbg(us, "Ready to enter SS state\n"); rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); usb_autopm_put_interface_async(us->pusb_intf); - US_DEBUGP("%s: RTS51X_STAT_SS 01," - "intf->pm_usage_cnt:%d, power.usage:%d\n", - __func__, - atomic_read(&us->pusb_intf->pm_usage_cnt), - atomic_read( - &us->pusb_intf->dev.power.usage_count)); + usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); } break; default: - US_DEBUGP("%s: Unknonwn state !!!\n", __func__); + usb_stor_dbg(us, "Unknown state !!!\n"); break; } - - US_DEBUGP("%s: --->\n", __func__); } static inline int working_scsi(struct scsi_cmnd *srb) @@ -834,24 +809,21 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) }; int ret; - US_DEBUGP("%s: <---\n", __func__); - if (working_scsi(srb)) { - US_DEBUGP("%s: working scsi, intf->pm_usage_cnt:%d," - "power.usage:%d\n", __func__, - atomic_read(&us->pusb_intf->pm_usage_cnt), - atomic_read(&us->pusb_intf->dev.power.usage_count)); + usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { ret = usb_autopm_get_interface(us->pusb_intf); - US_DEBUGP("%s: working scsi, ret=%d\n", __func__, ret); + usb_stor_dbg(us, "working scsi, ret=%d\n", ret); } if (rts51x_get_stat(chip) != RTS51X_STAT_RUN) rts51x_set_stat(chip, RTS51X_STAT_RUN); chip->proto_handler_backup(srb, us); } else { if (rts51x_get_stat(chip) == RTS51X_STAT_SS) { - US_DEBUGP("%s: NOT working scsi\n", __func__); + usb_stor_dbg(us, "NOT working scsi\n"); if ((srb->cmnd[0] == TEST_UNIT_READY) && (chip->pwr_state == US_SUSPEND)) { if (TST_LUN_READY(chip, srb->device->lun)) { @@ -862,8 +834,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) media_not_present, US_SENSE_SIZE); } - US_DEBUGP("%s: TEST_UNIT_READY--->\n", - __func__); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); goto out; } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { @@ -876,12 +847,11 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) } else { srb->result = SAM_STAT_GOOD; } - US_DEBUGP("%s: ALLOW_MEDIUM_REMOVAL--->\n", - __func__); + usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n"); goto out; } } else { - US_DEBUGP("%s: NOT working scsi, not SS\n", __func__); + usb_stor_dbg(us, "NOT working scsi, not SS\n"); chip->proto_handler_backup(srb, us); /* Check whether card is plugged in */ if (srb->cmnd[0] == TEST_UNIT_READY) { @@ -901,11 +871,9 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) } } out: - US_DEBUGP("%s: state:%d\n", __func__, rts51x_get_stat(chip)); + usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); if (rts51x_get_stat(chip) == RTS51X_STAT_RUN) rts51x_modi_suspend_timer(chip); - - US_DEBUGP("%s: --->\n", __func__); } static int realtek_cr_autosuspend_setup(struct us_data *us) @@ -923,7 +891,7 @@ static int realtek_cr_autosuspend_setup(struct us_data *us) retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len)); if (retval != STATUS_SUCCESS) { - US_DEBUGP("Read status fail\n"); + usb_stor_dbg(us, "Read status fail\n"); return -EIO; } status = chip->status; @@ -966,11 +934,13 @@ static int realtek_cr_autosuspend_setup(struct us_data *us) static void realtek_cr_destructor(void *extra) { struct rts51x_chip *chip = (struct rts51x_chip *)extra; - - US_DEBUGP("%s: <---\n", __func__); + struct us_data *us; if (!chip) return; + + us = chip->us; + #ifdef CONFIG_REALTEK_AUTOPM if (ss_en) { del_timer(&chip->rts51x_suspend_timer); @@ -985,8 +955,6 @@ static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s: <---\n", __func__); - /* wait until no command is running */ mutex_lock(&us->dev_mutex); @@ -994,8 +962,6 @@ static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message) mutex_unlock(&us->dev_mutex); - US_DEBUGP("%s: --->\n", __func__); - return 0; } @@ -1003,13 +969,9 @@ static int realtek_cr_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s: <---\n", __func__); - fw5895_init(us); config_autodelink_after_power_on(us); - US_DEBUGP("%s: --->\n", __func__); - return 0; } #else @@ -1030,7 +992,7 @@ static int init_realtek_cr(struct us_data *us) us->extra_destructor = realtek_cr_destructor; us->max_lun = chip->max_lun = rts51x_get_max_lun(us); - US_DEBUGP("chip->max_lun = %d\n", chip->max_lun); + usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); size = (chip->max_lun + 1) * sizeof(struct rts51x_status); chip->status = kzalloc(size, GFP_KERNEL); @@ -1057,7 +1019,7 @@ static int init_realtek_cr(struct us_data *us) } #endif - US_DEBUGP("chip->flag = 0x%x\n", chip->flag); + usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); (void)config_autodelink_after_power_on(us); @@ -1079,7 +1041,7 @@ static int realtek_cr_probe(struct usb_interface *intf, struct us_data *us; int result; - US_DEBUGP("Probe Realtek Card Reader!\n"); + usb_stor_dbg(NULL, "Probe Realtek Card Reader!\n"); result = usb_stor_probe1(&us, intf, id, (id - realtek_cr_ids) + diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 615c66e..27f2107 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -313,8 +313,6 @@ static int queuecommand_lck(struct scsi_cmnd *srb, { struct us_data *us = host_to_us(srb->device->host); - US_DEBUGP("%s called\n", __func__); - /* check for state-transition errors */ if (us->srb != NULL) { printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", @@ -324,7 +322,7 @@ static int queuecommand_lck(struct scsi_cmnd *srb, /* fail the command if we are disconnecting */ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { - US_DEBUGP("Fail command during disconnect\n"); + usb_stor_dbg(us, "Fail command during disconnect\n"); srb->result = DID_NO_CONNECT << 16; done(srb); return 0; @@ -349,8 +347,6 @@ static int command_abort(struct scsi_cmnd *srb) { struct us_data *us = host_to_us(srb->device->host); - US_DEBUGP("%s called\n", __func__); - /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING * bits are protected by the host lock. */ scsi_lock(us_to_host(us)); @@ -386,8 +382,6 @@ static int device_reset(struct scsi_cmnd *srb) struct us_data *us = host_to_us(srb->device->host); int result; - US_DEBUGP("%s called\n", __func__); - /* lock the device pointers and do the reset */ mutex_lock(&(us->dev_mutex)); result = us->transport_reset(us); @@ -402,7 +396,6 @@ static int bus_reset(struct scsi_cmnd *srb) struct us_data *us = host_to_us(srb->device->host); int result; - US_DEBUGP("%s called\n", __func__); result = usb_stor_port_reset(us); return result < 0 ? FAILED : SUCCESS; } diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 7bd54e0..915315e 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -347,7 +347,7 @@ sddr09_test_unit_ready(struct us_data *us) { result = sddr09_send_scsi_command(us, command, 6); - US_DEBUGP("sddr09_test_unit_ready returns %d\n", result); + usb_stor_dbg(us, "sddr09_test_unit_ready returns %d\n", result); return result; } @@ -423,8 +423,8 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, result = sddr09_send_scsi_command(us, command, 12); if (result) { - US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", - x, result); + usb_stor_dbg(us, "Result for send_control in sddr09_read2%d %d\n", + x, result); return result; } @@ -432,8 +432,8 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, buf, bulklen, use_sg, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", - x, result); + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read2%d %d\n", + x, result); return -EIO; } return 0; @@ -494,8 +494,8 @@ sddr09_read22(struct us_data *us, unsigned long fromaddress, int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); - US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n", - nr_of_pages, bulklen); + usb_stor_dbg(us, "reading %d pages, %d bytes\n", + nr_of_pages, bulklen); return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen, buf, use_sg); } @@ -538,7 +538,7 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) { unsigned char *command = us->iobuf; int result; - US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress); + usb_stor_dbg(us, "erase address %lu\n", Eaddress); memset(command, 0, 12); command[0] = 0xEA; @@ -551,8 +551,8 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) { result = sddr09_send_scsi_command(us, command, 12); if (result) - US_DEBUGP("Result for send_control in sddr09_erase %d\n", - result); + usb_stor_dbg(us, "Result for send_control in sddr09_erase %d\n", + result); return result; } @@ -609,8 +609,8 @@ sddr09_writeX(struct us_data *us, result = sddr09_send_scsi_command(us, command, 12); if (result) { - US_DEBUGP("Result for send_control in sddr09_writeX %d\n", - result); + usb_stor_dbg(us, "Result for send_control in sddr09_writeX %d\n", + result); return result; } @@ -618,8 +618,8 @@ sddr09_writeX(struct us_data *us, buf, bulklen, use_sg, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", - result); + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_writeX %d\n", + result); return -EIO; } return 0; @@ -687,8 +687,8 @@ sddr09_read_sg_test_only(struct us_data *us) { result = sddr09_send_scsi_command(us, command, 4*nsg+3); if (result) { - US_DEBUGP("Result for send_control in sddr09_read_sg %d\n", - result); + usb_stor_dbg(us, "Result for send_control in sddr09_read_sg %d\n", + result); return result; } @@ -700,8 +700,8 @@ sddr09_read_sg_test_only(struct us_data *us) { buf, bulklen, NULL); kfree(buf); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n", - result); + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read_sg %d\n", + result); return -EIO; } @@ -727,7 +727,7 @@ sddr09_read_status(struct us_data *us, unsigned char *status) { unsigned char *data = us->iobuf; int result; - US_DEBUGP("Reading status...\n"); + usb_stor_dbg(us, "Reading status...\n"); memset(command, 0, 12); command[0] = 0xEC; @@ -789,8 +789,8 @@ sddr09_read_data(struct us_data *us, /* Not overflowing capacity? */ if (lba >= maxlba) { - US_DEBUGP("Error: Requested lba %u exceeds " - "maximum %u\n", lba, maxlba); + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, maxlba); result = -EIO; break; } @@ -800,8 +800,8 @@ sddr09_read_data(struct us_data *us, if (pba == UNDEF) { /* this lba was never written */ - US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", - pages, lba, page); + usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); /* This is not really an error. It just means that the block has never been written. @@ -811,9 +811,8 @@ sddr09_read_data(struct us_data *us, memset(buffer, 0, len); } else { - US_DEBUGP("Read %d pages, from PBA %d" - " (LBA %d) page %d\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", + pages, pba, lba, page); address = ((pba << info->blockshift) + page) << info->pageshift; @@ -916,14 +915,14 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, cptr = bptr + info->pagesize; nand_compute_ecc(bptr, ecc); if (!nand_compare_ecc(cptr+13, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", + i, pba); nand_store_ecc(cptr+13, ecc); } nand_compute_ecc(bptr+(info->pagesize / 2), ecc); if (!nand_compare_ecc(cptr+8, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", + i, pba); nand_store_ecc(cptr+8, ecc); } cptr[6] = cptr[11] = MSB_of(lbap); @@ -943,22 +942,21 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, nand_store_ecc(cptr+8, ecc); } - US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba); + usb_stor_dbg(us, "Rewrite PBA %d (LBA %d)\n", pba, lba); result = sddr09_write_inplace(us, address>>1, info->blocksize, info->pageshift, blockbuffer, 0); - US_DEBUGP("sddr09_write_inplace returns %d\n", result); + usb_stor_dbg(us, "sddr09_write_inplace returns %d\n", result); #if 0 { unsigned char status = 0; int result2 = sddr09_read_status(us, &status); if (result2) - US_DEBUGP("sddr09_write_inplace: cannot read status\n"); + usb_stor_dbg(us, "cannot read status\n"); else if (status != 0xc0) - US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n", - status); + usb_stor_dbg(us, "status after write: 0x%x\n", status); } #endif @@ -1031,8 +1029,8 @@ sddr09_write_data(struct us_data *us, /* Not overflowing capacity? */ if (lba >= maxlba) { - US_DEBUGP("Error: Requested lba %u exceeds " - "maximum %u\n", lba, maxlba); + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, maxlba); result = -EIO; break; } @@ -1064,8 +1062,8 @@ sddr09_read_control(struct us_data *us, unsigned char *content, int use_sg) { - US_DEBUGP("Read control address %lu, blocks %d\n", - address, blocks); + usb_stor_dbg(us, "Read control address %lu, blocks %d\n", + address, blocks); return sddr09_read21(us, address, blocks, CONTROL_SHIFT, content, use_sg); @@ -1111,21 +1109,21 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { result = sddr09_read_status(us, &status); if (result) { - US_DEBUGP("sddr09_get_wp: read_status fails\n"); + usb_stor_dbg(us, "read_status fails\n"); return result; } - US_DEBUGP("sddr09_get_wp: status 0x%02X", status); + usb_stor_dbg(us, "status 0x%02X", status); if ((status & 0x80) == 0) { info->flags |= SDDR09_WP; /* write protected */ - US_DEBUGP(" WP"); + US_DEBUGPX(" WP"); } if (status & 0x40) - US_DEBUGP(" Ready"); + US_DEBUGPX(" Ready"); if (status & LUNBITS) - US_DEBUGP(" Suspended"); + US_DEBUGPX(" Suspended"); if (status & 0x1) - US_DEBUGP(" Error"); - US_DEBUGP("\n"); + US_DEBUGPX(" Error"); + US_DEBUGPX("\n"); return 0; } @@ -1154,12 +1152,12 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { char blurbtxt[256]; int result; - US_DEBUGP("Reading capacity...\n"); + usb_stor_dbg(us, "Reading capacity...\n"); result = sddr09_read_deviceID(us, deviceID); if (result) { - US_DEBUGP("Result of read_deviceID is %d\n", result); + usb_stor_dbg(us, "Result of read_deviceID is %d\n", result); printk(KERN_WARNING "sddr09: could not read card info\n"); return NULL; } @@ -1392,7 +1390,7 @@ sddr09_read_map(struct us_data *us) { lbact += ct; } info->lbact = lbact; - US_DEBUGP("Found %d LBA's\n", lbact); + usb_stor_dbg(us, "Found %d LBA's\n", lbact); result = 0; done: @@ -1423,18 +1421,18 @@ sddr09_common_init(struct us_data *us) { /* set the configuration -- STALL is an acceptable response here */ if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { - US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev - ->actconfig->desc.bConfigurationValue); + usb_stor_dbg(us, "active config #%d != 1 ??\n", + us->pusb_dev->actconfig->desc.bConfigurationValue); return -EINVAL; } result = usb_reset_configuration(us->pusb_dev); - US_DEBUGP("Result of usb_reset_configuration is %d\n", result); + usb_stor_dbg(us, "Result of usb_reset_configuration is %d\n", result); if (result == -EPIPE) { - US_DEBUGP("-- stall on control interface\n"); + usb_stor_dbg(us, "-- stall on control interface\n"); } else if (result != 0) { /* it's not a stall, but another error -- time to bail */ - US_DEBUGP("-- Unknown error. Rejecting device\n"); + usb_stor_dbg(us, "-- Unknown error. Rejecting device\n"); return -EINVAL; } @@ -1464,20 +1462,20 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); if (result) { - US_DEBUGP("sddr09_init: send_command fails\n"); + usb_stor_dbg(us, "send_command fails\n"); return result; } - US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); + usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]); // get 07 02 result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); if (result) { - US_DEBUGP("sddr09_init: 2nd send_command fails\n"); + usb_stor_dbg(us, "2nd send_command fails\n"); return result; } - US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); + usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]); // get 07 00 result = sddr09_request_sense(us, data, 18); @@ -1507,7 +1505,7 @@ static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; - US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun); + usb_stor_dbg(us, "LUN=%d\n", srb->device->lun); switch (srb->device->lun) { case 0: @@ -1533,8 +1531,7 @@ static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) break; default: - US_DEBUGP("dpcm_transport: Invalid LUN %d\n", - srb->device->lun); + usb_stor_dbg(us, "Invalid LUN %d\n", srb->device->lun); ret = USB_STOR_TRANSPORT_ERROR; break; } @@ -1640,8 +1637,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) or for all pages. */ /* %% We should check DBD %% */ if (modepage == 0x01 || modepage == 0x3F) { - US_DEBUGP("SDDR09: Dummy up request for " - "mode page 0x%x\n", modepage); + usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n", + modepage); memcpy(ptr, mode_page_01, sizeof(mode_page_01)); ((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2); @@ -1667,8 +1664,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("READ_10: read page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "READ_10: read page %d pagect %d\n", + page, pages); result = sddr09_read_data(us, page, pages); return (result == 0 ? USB_STOR_TRANSPORT_GOOD : @@ -1682,8 +1679,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("WRITE_10: write page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "WRITE_10: write page %d pagect %d\n", + page, pages); result = sddr09_write_data(us, page, pages); return (result == 0 ? USB_STOR_TRANSPORT_GOOD : @@ -1710,12 +1707,12 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) for (i=0; i<12; i++) sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]); - US_DEBUGP("SDDR09: Send control for command %s\n", ptr); + usb_stor_dbg(us, "Send control for command %s\n", ptr); result = sddr09_send_scsi_command(us, srb->cmnd, 12); if (result) { - US_DEBUGP("sddr09_transport: sddr09_send_scsi_command " - "returns %d\n", result); + usb_stor_dbg(us, "sddr09_send_scsi_command returns %d\n", + result); return USB_STOR_TRANSPORT_ERROR; } @@ -1727,10 +1724,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE) ? us->send_bulk_pipe : us->recv_bulk_pipe; - US_DEBUGP("SDDR09: %s %d bytes\n", - (srb->sc_data_direction == DMA_TO_DEVICE) ? - "sending" : "receiving", - scsi_bufflen(srb)); + usb_stor_dbg(us, "%s %d bytes\n", + (srb->sc_data_direction == DMA_TO_DEVICE) ? + "sending" : "receiving", + scsi_bufflen(srb)); result = usb_stor_bulk_srb(us, pipe, srb); diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index d278c5a..aacedef 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -145,8 +145,7 @@ static int sddr55_status(struct us_data *us) result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); - US_DEBUGP("Result for send_command in status %d\n", - result); + usb_stor_dbg(us, "Result for send_command in status %d\n", result); if (result != USB_STOR_XFER_GOOD) { set_sense_info (4, 0, 0); /* hardware error */ @@ -236,9 +235,8 @@ static int sddr55_read_data(struct us_data *us, info->blocksize - page); len = pages << info->pageshift; - US_DEBUGP("Read %02X pages, from PBA %04X" - " (LBA %04X) page %02X\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Read %02X pages, from PBA %04X (LBA %04X) page %02X\n", + pages, pba, lba, page); if (pba == NOT_ALLOCATED) { /* no pba for this lba, fill with zeroes */ @@ -261,8 +259,8 @@ static int sddr55_read_data(struct us_data *us, result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); - US_DEBUGP("Result for send_command in read_data %d\n", - result); + usb_stor_dbg(us, "Result for send_command in read_data %d\n", + result); if (result != USB_STOR_XFER_GOOD) { result = USB_STOR_TRANSPORT_ERROR; @@ -368,9 +366,8 @@ static int sddr55_write_data(struct us_data *us, usb_stor_access_xfer_buf(buffer, len, us->srb, &sg, &offset, FROM_XFER_BUF); - US_DEBUGP("Write %02X pages, to PBA %04X" - " (LBA %04X) page %02X\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Write %02X pages, to PBA %04X (LBA %04X) page %02X\n", + pages, pba, lba, page); command[4] = 0; @@ -384,7 +381,7 @@ static int sddr55_write_data(struct us_data *us, /* set pba to first block in zone lba is in */ pba = (lba / 1000) * 1024; - US_DEBUGP("No PBA for LBA %04X\n",lba); + usb_stor_dbg(us, "No PBA for LBA %04X\n", lba); if (max_pba > 1024) max_pba = 1024; @@ -407,14 +404,15 @@ static int sddr55_write_data(struct us_data *us, if (pba == -1) { /* oh dear */ - US_DEBUGP("Couldn't find unallocated block\n"); + usb_stor_dbg(us, "Couldn't find unallocated block\n"); set_sense_info (3, 0x31, 0); /* medium error */ result = USB_STOR_TRANSPORT_FAILED; goto leave; } - US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba); + usb_stor_dbg(us, "Allocating PBA %04X for LBA %04X\n", + pba, lba); /* set writing to unallocated block flag */ command[4] = 0x40; @@ -439,8 +437,8 @@ static int sddr55_write_data(struct us_data *us, DMA_TO_DEVICE, command, 8); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for send_command in write_data %d\n", - result); + usb_stor_dbg(us, "Result for send_command in write_data %d\n", + result); /* set_sense_info is superfluous here? */ set_sense_info (3, 0x3, 0);/* peripheral write error */ @@ -453,8 +451,8 @@ static int sddr55_write_data(struct us_data *us, DMA_TO_DEVICE, buffer, len); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for send_data in write_data %d\n", - result); + usb_stor_dbg(us, "Result for send_data in write_data %d\n", + result); /* set_sense_info is superfluous here? */ set_sense_info (3, 0x3, 0);/* peripheral write error */ @@ -466,8 +464,8 @@ static int sddr55_write_data(struct us_data *us, result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for get_status in write_data %d\n", - result); + usb_stor_dbg(us, "Result for get_status in write_data %d\n", + result); /* set_sense_info is superfluous here? */ set_sense_info (3, 0x3, 0);/* peripheral write error */ @@ -487,8 +485,8 @@ static int sddr55_write_data(struct us_data *us, goto leave; } - US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", - lba, pba, new_pba); + usb_stor_dbg(us, "Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", + lba, pba, new_pba); /* update the lba<->pba maps, note new_pba might be the same as pba */ info->lba_to_pba[lba] = new_pba; @@ -531,8 +529,8 @@ static int sddr55_read_deviceID(struct us_data *us, command[7] = 0x84; result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); - US_DEBUGP("Result of send_control for device ID is %d\n", - result); + usb_stor_dbg(us, "Result of send_control for device ID is %d\n", + result); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -568,20 +566,19 @@ static unsigned long sddr55_get_capacity(struct us_data *us) { int result; struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; - US_DEBUGP("Reading capacity...\n"); + usb_stor_dbg(us, "Reading capacity...\n"); result = sddr55_read_deviceID(us, &manufacturerID, &deviceID); - US_DEBUGP("Result of read_deviceID is %d\n", - result); + usb_stor_dbg(us, "Result of read_deviceID is %d\n", result); if (result != USB_STOR_XFER_GOOD) return 0; - US_DEBUGP("Device ID = %02X\n", deviceID); - US_DEBUGP("Manuf ID = %02X\n", manufacturerID); + usb_stor_dbg(us, "Device ID = %02X\n", deviceID); + usb_stor_dbg(us, "Manuf ID = %02X\n", manufacturerID); info->pageshift = 9; info->smallpageshift = 0; @@ -753,7 +750,7 @@ static int sddr55_read_map(struct us_data *us) { } if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF)) - US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i); + usb_stor_dbg(us, "LBA %04X <-> PBA %04X\n", lba, i); info->lba_to_pba[lba + zone * 1000] = i; } @@ -808,7 +805,10 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) info = (struct sddr55_card_info *)(us->extra); if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]); + usb_stor_dbg(us, "request sense %02x/%02x/%02x\n", + info->sense_data[2], + info->sense_data[12], + info->sense_data[13]); memcpy (ptr, info->sense_data, sizeof info->sense_data); ptr[0] = 0x70; @@ -892,13 +892,11 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); if ( (srb->cmnd[2] & 0x3F) == 0x01 ) { - US_DEBUGP( - "SDDR55: Dummy up request for mode page 1\n"); + usb_stor_dbg(us, "Dummy up request for mode page 1\n"); return USB_STOR_TRANSPORT_GOOD; } else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) { - US_DEBUGP( - "SDDR55: Dummy up request for all mode pages\n"); + usb_stor_dbg(us, "Dummy up request for all mode pages\n"); return USB_STOR_TRANSPORT_GOOD; } @@ -908,10 +906,8 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { - US_DEBUGP( - "SDDR55: %s medium removal. Not that I can do" - " anything about it...\n", - (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); + usb_stor_dbg(us, "%s medium removal. Not that I can do anything about it...\n", + (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); return USB_STOR_TRANSPORT_GOOD; @@ -935,8 +931,8 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) if (lba >= info->max_log_blks) { - US_DEBUGP("Error: Requested LBA %04X exceeds maximum " - "block %04X\n", lba, info->max_log_blks-1); + usb_stor_dbg(us, "Error: Requested LBA %04X exceeds maximum block %04X\n", + lba, info->max_log_blks - 1); set_sense_info (5, 0x24, 0); /* invalid field in command */ @@ -946,15 +942,13 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) pba = info->lba_to_pba[lba]; if (srb->cmnd[0] == WRITE_10) { - US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X" - " pages %d\n", - pba, lba, page, pages); + usb_stor_dbg(us, "WRITE_10: write block %04X (LBA %04X) page %01X pages %d\n", + pba, lba, page, pages); return sddr55_write_data(us, lba, page, pages); } else { - US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X" - " pages %d\n", - pba, lba, page, pages); + usb_stor_dbg(us, "READ_10: read block %04X (LBA %04X) page %01X pages %d\n", + pba, lba, page, pages); return sddr55_read_data(us, lba, page, pages); } diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index daf2fc5..e486aed 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -271,7 +271,7 @@ static int usbat_bulk_read(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("usbat_bulk_read: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL); } @@ -286,7 +286,7 @@ static int usbat_bulk_write(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("usbat_bulk_write: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL); } @@ -312,7 +312,7 @@ static int usbat_get_status(struct us_data *us, unsigned char *status) int rc; rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status); - US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status)); + usb_stor_dbg(us, "0x%02X\n", *status); return rc; } @@ -425,7 +425,7 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) return USB_STOR_TRANSPORT_FAILED; if ((*status & 0x80)==0x00) { /* not busy */ - US_DEBUGP("Waited not busy for %d steps\n", i); + usb_stor_dbg(us, "Waited not busy for %d steps\n", i); return USB_STOR_TRANSPORT_GOOD; } @@ -439,8 +439,8 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) msleep(1000); /* X minutes */ } - US_DEBUGP("Waited not busy for %d minutes, timing out.\n", - minutes); + usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n", + minutes); return USB_STOR_TRANSPORT_FAILED; } @@ -657,8 +657,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; - US_DEBUGP("Redoing %s\n", - direction==DMA_TO_DEVICE ? "write" : "read"); + usb_stor_dbg(us, "Redoing %s\n", + direction == DMA_TO_DEVICE + ? "write" : "read"); } else if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -667,8 +668,8 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } - US_DEBUGP("Bummer! %s bulk data 20 times failed.\n", - direction==DMA_TO_DEVICE ? "Writing" : "Reading"); + usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n", + direction == DMA_TO_DEVICE ? "Writing" : "Reading"); return USB_STOR_TRANSPORT_FAILED; } @@ -827,7 +828,7 @@ static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags) data_flags, USBAT_UIO_READ); - US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags)); + usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags); return result; } @@ -903,7 +904,7 @@ static int usbat_device_enable_cdt(struct us_data *us) static int usbat_flash_check_media_present(unsigned char *uio) { if (*uio & USBAT_UIO_UI0) { - US_DEBUGP("usbat_flash_check_media_present: no media detected\n"); + usb_stor_dbg(NULL, "no media detected\n"); return USBAT_FLASH_MEDIA_NONE; } @@ -916,7 +917,7 @@ static int usbat_flash_check_media_present(unsigned char *uio) static int usbat_flash_check_media_changed(unsigned char *uio) { if (*uio & USBAT_UIO_0) { - US_DEBUGP("usbat_flash_check_media_changed: media change detected\n"); + usb_stor_dbg(NULL, "media change detected\n"); return USBAT_FLASH_MEDIA_CHANGED; } @@ -1008,11 +1009,11 @@ static int usbat_identify_device(struct us_data *us, /* Check for error bit, or if the command 'fell through' */ if (status == 0xA1 || !(status & 0x01)) { /* Device is HP 8200 */ - US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); + usb_stor_dbg(us, "Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; } else { /* Device is a CompactFlash reader/writer */ - US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); + usb_stor_dbg(us, "Detected Flash reader/writer\n"); info->devicetype = USBAT_DEV_FLASH; } @@ -1075,7 +1076,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, /* ATA command : IDENTIFY DEVICE */ rc = usbat_multiple_write(us, registers, command, 3); if (rc != USB_STOR_XFER_GOOD) { - US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); + usb_stor_dbg(us, "Gah! identify_device failed\n"); rc = USB_STOR_TRANSPORT_ERROR; goto leave; } @@ -1178,7 +1179,7 @@ static int usbat_flash_read_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); + usb_stor_dbg(us, "%d bytes\n", len); /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, @@ -1301,8 +1302,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, unsigned int sg_offset = 0; struct scatterlist *sg = NULL; - US_DEBUGP("handle_read10: transfersize %d\n", - srb->transfersize); + usb_stor_dbg(us, "transfersize %d\n", srb->transfersize); if (scsi_bufflen(srb) < 0x10000) { @@ -1329,14 +1329,14 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, len = short_pack(data[7+9], data[7+8]); len <<= 16; len |= data[7+7]; - US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len); + usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len); srb->transfersize = scsi_bufflen(srb)/len; } if (!srb->transfersize) { srb->transfersize = 2048; /* A guess */ - US_DEBUGP("handle_read10: transfersize 0, forcing %d\n", - srb->transfersize); + usb_stor_dbg(us, "transfersize 0, forcing %d\n", + srb->transfersize); } /* @@ -1346,7 +1346,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, */ len = (65535/srb->transfersize) * srb->transfersize; - US_DEBUGP("Max read is %d bytes\n", len); + usb_stor_dbg(us, "Max read is %d bytes\n", len); len = min(len, scsi_bufflen(srb)); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) /* bloody hell! */ @@ -1460,10 +1460,9 @@ static int init_usbat(struct us_data *us, int devicetype) unsigned char *status = us->iobuf; us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n"); + if (!us->extra) return 1; - } + info = (struct usbat_info *) (us->extra); /* Enable peripheral control signals */ @@ -1473,7 +1472,7 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 1\n"); + usb_stor_dbg(us, "INIT 1\n"); msleep(2000); @@ -1481,7 +1480,7 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 2\n"); + usb_stor_dbg(us, "INIT 2\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) @@ -1491,32 +1490,32 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 3\n"); + usb_stor_dbg(us, "INIT 3\n"); rc = usbat_select_and_test_registers(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 4\n"); + usb_stor_dbg(us, "INIT 4\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 5\n"); + usb_stor_dbg(us, "INIT 5\n"); /* Enable peripheral control signals and card detect */ rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 6\n"); + usb_stor_dbg(us, "INIT 6\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 7\n"); + usb_stor_dbg(us, "INIT 7\n"); msleep(1400); @@ -1524,19 +1523,19 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 8\n"); + usb_stor_dbg(us, "INIT 8\n"); rc = usbat_select_and_test_registers(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 9\n"); + usb_stor_dbg(us, "INIT 9\n"); /* At this point, we need to detect which device we are using */ if (usbat_set_transport(us, info, devicetype)) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 10\n"); + usb_stor_dbg(us, "INIT 10\n"); if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { subcountH = 0x02; @@ -1547,7 +1546,7 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 11\n"); + usb_stor_dbg(us, "INIT 11\n"); return USB_STOR_TRANSPORT_GOOD; } @@ -1592,7 +1591,7 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) } result = usbat_get_status(us, status); - US_DEBUGP("Status = %02X\n", *status); + usb_stor_dbg(us, "Status = %02X\n", *status); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (srb->cmnd[0] == TEST_UNIT_READY) @@ -1610,7 +1609,7 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) if (result == USB_STOR_TRANSPORT_GOOD) { transferred += len; - US_DEBUGP("Wrote %08X bytes\n", transferred); + usb_stor_dbg(us, "Wrote %08X bytes\n", transferred); } return result; @@ -1623,8 +1622,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) } if (len > 0xFFFF) { - US_DEBUGP("Error: len = %08X... what do I do now?\n", - len); + usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n", + len); return USB_STOR_TRANSPORT_ERROR; } @@ -1693,7 +1692,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) }; if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n"); + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; @@ -1710,8 +1709,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) /* hard coded 512 byte sectors as per ATA spec */ info->ssize = 0x200; - US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", - info->sectors, info->ssize); + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); /* * build the reply @@ -1726,7 +1725,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SELECT_10) { - US_DEBUGP("usbat_flash_transport: Gah! MODE_SELECT_10.\n"); + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1736,7 +1735,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("usbat_flash_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_read_data(us, info, block, blocks); } @@ -1750,7 +1750,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_read_data(us, info, block, blocks); } @@ -1760,7 +1761,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_write_data(us, info, block, blocks); } @@ -1774,13 +1776,14 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); rc = usbat_flash_check_media(us, info); if (rc != USB_STOR_TRANSPORT_GOOD) @@ -1790,7 +1793,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n"); + usb_stor_dbg(us, "REQUEST_SENSE\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; @@ -1811,8 +1814,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } - US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 17e3695..de05677 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -47,7 +47,7 @@ static bool containsFullLinuxPackage(struct swoc_info *swocInfo) static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode) { int result; - US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n"); + usb_stor_dbg(NULL, "SWIMS: %s", "DEVICE MODE SWITCH\n"); result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), SWIMS_USB_REQUEST_SetSwocMode, /* __u8 request */ USB_TYPE_VENDOR | USB_DIR_OUT, /* __u8 request type */ @@ -65,7 +65,7 @@ static int sierra_get_swoc_info(struct usb_device *udev, { int result; - US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n"); + usb_stor_dbg(NULL, "SWIMS: Attempting to get TRU-Install info\n"); result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), SWIMS_USB_REQUEST_GetSwocInfo, /* __u8 request */ @@ -83,9 +83,9 @@ static int sierra_get_swoc_info(struct usb_device *udev, static void debug_swoc(struct swoc_info *swocInfo) { - US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev); - US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU); - US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer); + usb_stor_dbg(NULL, "SWIMS: SWoC Rev: %02d\n", swocInfo->rev); + usb_stor_dbg(NULL, "SWIMS: Linux SKU: %04X\n", swocInfo->LinuxSKU); + usb_stor_dbg(NULL, "SWIMS: Linux Version: %04X\n", swocInfo->LinuxVer); } @@ -101,13 +101,12 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr, } else { swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL); if (!swocInfo) { - US_DEBUGP("SWIMS: Allocation failure\n"); snprintf(buf, PAGE_SIZE, "Error\n"); return -ENOMEM; } result = sierra_get_swoc_info(udev, swocInfo); if (result < 0) { - US_DEBUGP("SWIMS: failed SWoC query\n"); + usb_stor_dbg(NULL, "SWIMS: failed SWoC query\n"); kfree(swocInfo); snprintf(buf, PAGE_SIZE, "Error\n"); return -EIO; @@ -138,45 +137,40 @@ int sierra_ms_init(struct us_data *us) sh = us_to_host(us); scsi_get_host_dev(sh); - US_DEBUGP("SWIMS: sierra_ms_init called\n"); - /* Force Modem mode */ if (swi_tru_install == TRU_FORCE_MODEM) { - US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n"); + usb_stor_dbg(us, "SWIMS: Forcing Modem Mode\n"); result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); if (result < 0) - US_DEBUGP("SWIMS: Failed to switch to modem mode.\n"); + usb_stor_dbg(us, "SWIMS: Failed to switch to modem mode\n"); return -EIO; } /* Force Mass Storage mode (keep CD-Rom) */ else if (swi_tru_install == TRU_FORCE_MS) { - US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n"); + usb_stor_dbg(us, "SWIMS: Forcing Mass Storage Mode\n"); goto complete; } /* Normal TRU-Install Logic */ else { - US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n"); + usb_stor_dbg(us, "SWIMS: Normal SWoC Logic\n"); swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL); - if (!swocInfo) { - US_DEBUGP("SWIMS: %s", "Allocation failure\n"); + if (!swocInfo) return -ENOMEM; - } retries = 3; do { retries--; result = sierra_get_swoc_info(udev, swocInfo); if (result < 0) { - US_DEBUGP("SWIMS: %s", "Failed SWoC query\n"); + usb_stor_dbg(us, "SWIMS: Failed SWoC query\n"); schedule_timeout_uninterruptible(2*HZ); } } while (retries && result < 0); if (result < 0) { - US_DEBUGP("SWIMS: %s", - "Completely failed SWoC query\n"); + usb_stor_dbg(us, "SWIMS: Completely failed SWoC query\n"); kfree(swocInfo); return -EIO; } @@ -187,12 +181,11 @@ int sierra_ms_init(struct us_data *us) * then switch to modem mode */ if (!containsFullLinuxPackage(swocInfo)) { - US_DEBUGP("SWIMS: %s", - "Switching to Modem Mode\n"); + usb_stor_dbg(us, "SWIMS: Switching to Modem Mode\n"); result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); if (result < 0) - US_DEBUGP("SWIMS: Failed to switch modem\n"); + usb_stor_dbg(us, "SWIMS: Failed to switch modem\n"); kfree(swocInfo); return -EIO; } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c0543c8..b0db868 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -166,7 +166,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) /* cancel the URB, if it hasn't been cancelled already */ if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling URB\n"); + usb_stor_dbg(us, "-- cancelling URB\n"); usb_unlink_urb(us->current_urb); } } @@ -178,8 +178,8 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags); if (timeleft <= 0) { - US_DEBUGP("%s -- cancelling URB\n", - timeleft == 0 ? "Timeout" : "Signal"); + usb_stor_dbg(us, "%s -- cancelling URB\n", + timeleft == 0 ? "Timeout" : "Signal"); usb_kill_urb(us->current_urb); } @@ -197,9 +197,8 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe, { int status; - US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", - __func__, request, requesttype, - value, index, size); + usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + request, requesttype, value, index, size); /* fill in the devrequest structure */ us->cr->bRequestType = requesttype; @@ -249,7 +248,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) if (result >= 0) usb_reset_endpoint(us->pusb_dev, endp); - US_DEBUGP("%s: result = %d\n", __func__, result); + usb_stor_dbg(us, "result = %d\n", result); return result; } EXPORT_SYMBOL_GPL(usb_stor_clear_halt); @@ -265,18 +264,18 @@ EXPORT_SYMBOL_GPL(usb_stor_clear_halt); static int interpret_urb_result(struct us_data *us, unsigned int pipe, unsigned int length, int result, unsigned int partial) { - US_DEBUGP("Status code %d; transferred %u/%u\n", - result, partial, length); + usb_stor_dbg(us, "Status code %d; transferred %u/%u\n", + result, partial, length); switch (result) { /* no error code; did we send all the data? */ case 0: if (partial != length) { - US_DEBUGP("-- short transfer\n"); + usb_stor_dbg(us, "-- short transfer\n"); return USB_STOR_XFER_SHORT; } - US_DEBUGP("-- transfer complete\n"); + usb_stor_dbg(us, "-- transfer complete\n"); return USB_STOR_XFER_GOOD; /* stalled */ @@ -284,39 +283,40 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe, /* for control endpoints, (used by CB[I]) a stall indicates * a failed command */ if (usb_pipecontrol(pipe)) { - US_DEBUGP("-- stall on control pipe\n"); + usb_stor_dbg(us, "-- stall on control pipe\n"); return USB_STOR_XFER_STALLED; } /* for other sorts of endpoint, clear the stall */ - US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); + usb_stor_dbg(us, "clearing endpoint halt for pipe 0x%x\n", + pipe); if (usb_stor_clear_halt(us, pipe) < 0) return USB_STOR_XFER_ERROR; return USB_STOR_XFER_STALLED; /* babble - the device tried to send more than we wanted to read */ case -EOVERFLOW: - US_DEBUGP("-- babble\n"); + usb_stor_dbg(us, "-- babble\n"); return USB_STOR_XFER_LONG; /* the transfer was cancelled by abort, disconnect, or timeout */ case -ECONNRESET: - US_DEBUGP("-- transfer cancelled\n"); + usb_stor_dbg(us, "-- transfer cancelled\n"); return USB_STOR_XFER_ERROR; /* short scatter-gather read transfer */ case -EREMOTEIO: - US_DEBUGP("-- short read transfer\n"); + usb_stor_dbg(us, "-- short read transfer\n"); return USB_STOR_XFER_SHORT; /* abort or disconnect in progress */ case -EIO: - US_DEBUGP("-- abort or disconnect in progress\n"); + usb_stor_dbg(us, "-- abort or disconnect in progress\n"); return USB_STOR_XFER_ERROR; /* the catch-all error case */ default: - US_DEBUGP("-- unknown error\n"); + usb_stor_dbg(us, "-- unknown error\n"); return USB_STOR_XFER_ERROR; } } @@ -331,9 +331,8 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, { int result; - US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", - __func__, request, requesttype, - value, index, size); + usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + request, requesttype, value, index, size); /* fill in the devrequest structure */ us->cr->bRequestType = requesttype; @@ -367,7 +366,7 @@ static int usb_stor_intr_transfer(struct us_data *us, void *buf, unsigned int pipe = us->recv_intr_pipe; unsigned int maxp; - US_DEBUGP("%s: xfer %u bytes\n", __func__, length); + usb_stor_dbg(us, "xfer %u bytes\n", length); /* calculate the max packet size */ maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); @@ -394,7 +393,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, { int result; - US_DEBUGP("%s: xfer %u bytes\n", __func__, length); + usb_stor_dbg(us, "xfer %u bytes\n", length); /* fill and submit the URB */ usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, @@ -426,12 +425,11 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, return USB_STOR_XFER_ERROR; /* initialize the scatter-gather request block */ - US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__, - length, num_sg); + usb_stor_dbg(us, "xfer %u bytes, %d entries\n", length, num_sg); result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, sg, num_sg, length, GFP_NOIO); if (result) { - US_DEBUGP("usb_sg_init returned %d\n", result); + usb_stor_dbg(us, "usb_sg_init returned %d\n", result); return USB_STOR_XFER_ERROR; } @@ -444,7 +442,7 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, /* cancel the request, if it hasn't been cancelled already */ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling sg request\n"); + usb_stor_dbg(us, "-- cancelling sg request\n"); usb_sg_cancel(&us->current_sg); } } @@ -609,14 +607,14 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * short-circuit all other processing */ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- command was aborted\n"); + usb_stor_dbg(us, "-- command was aborted\n"); srb->result = DID_ABORT << 16; goto Handle_Errors; } /* if there is a transport error, reset and don't auto-sense */ if (result == USB_STOR_TRANSPORT_ERROR) { - US_DEBUGP("-- transport indicates error, resetting\n"); + usb_stor_dbg(us, "-- transport indicates error, resetting\n"); srb->result = DID_ERROR << 16; goto Handle_Errors; } @@ -645,7 +643,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) */ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) && srb->sc_data_direction != DMA_FROM_DEVICE) { - US_DEBUGP("-- CB transport device requiring auto-sense\n"); + usb_stor_dbg(us, "-- CB transport device requiring auto-sense\n"); need_auto_sense = 1; } @@ -655,7 +653,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * "failure" and an "error" in the transport mechanism. */ if (result == USB_STOR_TRANSPORT_FAILED) { - US_DEBUGP("-- transport indicates command failure\n"); + usb_stor_dbg(us, "-- transport indicates command failure\n"); need_auto_sense = 1; } @@ -670,7 +668,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) !(us->fflags & US_FL_SANE_SENSE) && !(us->fflags & US_FL_BAD_SENSE) && !(srb->cmnd[2] & 0x20))) { - US_DEBUGP("-- SAT supported, increasing auto-sense\n"); + usb_stor_dbg(us, "-- SAT supported, increasing auto-sense\n"); us->fflags |= US_FL_SANE_SENSE; } @@ -684,7 +682,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) (srb->cmnd[0] == MODE_SENSE) || (srb->cmnd[0] == LOG_SENSE) || (srb->cmnd[0] == MODE_SENSE_10))) { - US_DEBUGP("-- unexpectedly short transfer\n"); + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); } /* Now, if we need to do the auto-sense, let's do it */ @@ -700,7 +698,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) if (us->fflags & US_FL_SANE_SENSE) sense_size = ~0; Retry_Sense: - US_DEBUGP("Issuing auto-REQUEST_SENSE\n"); + usb_stor_dbg(us, "Issuing auto-REQUEST_SENSE\n"); scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size); @@ -719,7 +717,7 @@ Retry_Sense: scsi_eh_restore_cmnd(srb, &ses); if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- auto-sense aborted\n"); + usb_stor_dbg(us, "-- auto-sense aborted\n"); srb->result = DID_ABORT << 16; /* If SANE_SENSE caused this problem, disable it */ @@ -737,7 +735,7 @@ Retry_Sense: */ if (temp_result == USB_STOR_TRANSPORT_FAILED && sense_size != US_SENSE_SIZE) { - US_DEBUGP("-- auto-sense failure, retry small sense\n"); + usb_stor_dbg(us, "-- auto-sense failure, retry small sense\n"); sense_size = US_SENSE_SIZE; us->fflags &= ~US_FL_SANE_SENSE; us->fflags |= US_FL_BAD_SENSE; @@ -746,7 +744,7 @@ Retry_Sense: /* Other failures */ if (temp_result != USB_STOR_TRANSPORT_GOOD) { - US_DEBUGP("-- auto-sense failure\n"); + usb_stor_dbg(us, "-- auto-sense failure\n"); /* we skip the reset if this happens to be a * multi-target device, since failure of an @@ -766,25 +764,26 @@ Retry_Sense: !(us->fflags & US_FL_SANE_SENSE) && !(us->fflags & US_FL_BAD_SENSE) && (srb->sense_buffer[0] & 0x7C) == 0x70) { - US_DEBUGP("-- SANE_SENSE support enabled\n"); + usb_stor_dbg(us, "-- SANE_SENSE support enabled\n"); us->fflags |= US_FL_SANE_SENSE; /* Indicate to the user that we truncated their sense * because we didn't know it supported larger sense. */ - US_DEBUGP("-- Sense data truncated to %i from %i\n", - US_SENSE_SIZE, - srb->sense_buffer[7] + 8); + usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n", + US_SENSE_SIZE, + srb->sense_buffer[7] + 8); srb->sense_buffer[7] = (US_SENSE_SIZE - 8); } scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE, &sshdr); - US_DEBUGP("-- Result from auto-sense is %d\n", temp_result); - US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", - sshdr.response_code, sshdr.sense_key, - sshdr.asc, sshdr.ascq); + usb_stor_dbg(us, "-- Result from auto-sense is %d\n", + temp_result); + usb_stor_dbg(us, "-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", + sshdr.response_code, sshdr.sense_key, + sshdr.asc, sshdr.ascq); #ifdef CONFIG_USB_STORAGE_DEBUG usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq); #endif @@ -892,20 +891,18 @@ Retry_Sense: /* Stop the current URB transfer */ void usb_stor_stop_transport(struct us_data *us) { - US_DEBUGP("%s called\n", __func__); - /* If the state machine is blocked waiting for an URB, * let's wake it up. The test_and_clear_bit() call * guarantees that if a URB has just been submitted, * it won't be cancelled more than once. */ if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling URB\n"); + usb_stor_dbg(us, "-- cancelling URB\n"); usb_unlink_urb(us->current_urb); } /* If we are waiting for a scatter-gather operation, cancel it. */ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling sg request\n"); + usb_stor_dbg(us, "-- cancelling sg request\n"); usb_sg_cancel(&us->current_sg); } } @@ -928,7 +925,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) us->ifnum, srb->cmnd, srb->cmd_len); /* check the return code for the command */ - US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result); + usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n", + result); /* if we stalled the command, it means command failed */ if (result == USB_STOR_XFER_STALLED) { @@ -946,7 +944,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; result = usb_stor_bulk_srb(us, pipe, srb); - US_DEBUGP("CBI data stage result is 0x%x\n", result); + usb_stor_dbg(us, "CBI data stage result is 0x%x\n", result); /* if we stalled the data transfer it means command failed */ if (result == USB_STOR_XFER_STALLED) @@ -964,8 +962,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; result = usb_stor_intr_transfer(us, us->iobuf, 2); - US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n", - us->iobuf[0], us->iobuf[1]); + usb_stor_dbg(us, "Got interrupt data (0x%x, 0x%x)\n", + us->iobuf[0], us->iobuf[1]); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -992,8 +990,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) * into the first byte -- so if it's non-zero, call it a failure. */ if (us->iobuf[0]) { - US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n", - us->iobuf[0]); + usb_stor_dbg(us, "CBI IRQ data showed reserved bType 0x%x\n", + us->iobuf[0]); goto Failed; } @@ -1034,8 +1032,8 @@ int usb_stor_Bulk_max_lun(struct us_data *us) USB_RECIP_INTERFACE, 0, us->ifnum, us->iobuf, 1, 10*HZ); - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); + usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); /* if we have a successful request, return the result */ if (result > 0) @@ -1084,14 +1082,14 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) memcpy(bcb->CDB, srb->cmnd, bcb->Length); /* send it to out endpoint */ - US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", - le32_to_cpu(bcb->Signature), bcb->Tag, - le32_to_cpu(bcb->DataTransferLength), bcb->Flags, - (bcb->Lun >> 4), (bcb->Lun & 0x0F), - bcb->Length); + usb_stor_dbg(us, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", + le32_to_cpu(bcb->Signature), bcb->Tag, + le32_to_cpu(bcb->DataTransferLength), bcb->Flags, + (bcb->Lun >> 4), (bcb->Lun & 0x0F), + bcb->Length); result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, cbwlen, NULL); - US_DEBUGP("Bulk command transfer result=%d\n", result); + usb_stor_dbg(us, "Bulk command transfer result=%d\n", result); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -1108,7 +1106,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; result = usb_stor_bulk_srb(us, pipe, srb); - US_DEBUGP("Bulk data transfer result 0x%x\n", result); + usb_stor_dbg(us, "Bulk data transfer result 0x%x\n", result); if (result == USB_STOR_XFER_ERROR) return USB_STOR_TRANSPORT_ERROR; @@ -1127,7 +1125,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) */ /* get CSW for device status */ - US_DEBUGP("Attempting to get CSW...\n"); + usb_stor_dbg(us, "Attempting to get CSW...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen); @@ -1136,7 +1134,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) * CSWs. If we encounter such a thing, try to read the CSW again. */ if (result == USB_STOR_XFER_SHORT && cswlen == 0) { - US_DEBUGP("Received 0-length CSW; retrying...\n"); + usb_stor_dbg(us, "Received 0-length CSW; retrying...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen); } @@ -1145,24 +1143,24 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (result == USB_STOR_XFER_STALLED) { /* get the status again */ - US_DEBUGP("Attempting to get CSW (2nd try)...\n"); + usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, NULL); } /* if we still have a failure at this point, we're in trouble */ - US_DEBUGP("Bulk status result = %d\n", result); + usb_stor_dbg(us, "Bulk status result = %d\n", result); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; /* check bulk status */ residue = le32_to_cpu(bcs->Residue); - US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", - le32_to_cpu(bcs->Signature), bcs->Tag, - residue, bcs->Status); + usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", + le32_to_cpu(bcs->Signature), bcs->Tag, + residue, bcs->Status); if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) || bcs->Status > US_BULK_STAT_PHASE) { - US_DEBUGP("Bulk logical error\n"); + usb_stor_dbg(us, "Bulk logical error\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1173,12 +1171,12 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (!us->bcs_signature) { us->bcs_signature = bcs->Signature; if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN)) - US_DEBUGP("Learnt BCS signature 0x%08X\n", - le32_to_cpu(us->bcs_signature)); + usb_stor_dbg(us, "Learnt BCS signature 0x%08X\n", + le32_to_cpu(us->bcs_signature)); } else if (bcs->Signature != us->bcs_signature) { - US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", - le32_to_cpu(bcs->Signature), - le32_to_cpu(us->bcs_signature)); + usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), + le32_to_cpu(us->bcs_signature)); return USB_STOR_TRANSPORT_ERROR; } @@ -1255,7 +1253,7 @@ static int usb_stor_reset_common(struct us_data *us, int result2; if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { - US_DEBUGP("No reset during disconnect\n"); + usb_stor_dbg(us, "No reset during disconnect\n"); return -EIO; } @@ -1263,7 +1261,7 @@ static int usb_stor_reset_common(struct us_data *us, request, requesttype, value, index, data, size, 5*HZ); if (result < 0) { - US_DEBUGP("Soft reset failed: %d\n", result); + usb_stor_dbg(us, "Soft reset failed: %d\n", result); return result; } @@ -1273,23 +1271,23 @@ static int usb_stor_reset_common(struct us_data *us, test_bit(US_FLIDX_DISCONNECTING, &us->dflags), HZ*6); if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { - US_DEBUGP("Reset interrupted by disconnect\n"); + usb_stor_dbg(us, "Reset interrupted by disconnect\n"); return -EIO; } - US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n"); + usb_stor_dbg(us, "Soft reset: clearing bulk-in endpoint halt\n"); result = usb_stor_clear_halt(us, us->recv_bulk_pipe); - US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n"); + usb_stor_dbg(us, "Soft reset: clearing bulk-out endpoint halt\n"); result2 = usb_stor_clear_halt(us, us->send_bulk_pipe); /* return a result code based on the result of the clear-halts */ if (result >= 0) result = result2; if (result < 0) - US_DEBUGP("Soft reset failed\n"); + usb_stor_dbg(us, "Soft reset failed\n"); else - US_DEBUGP("Soft reset done\n"); + usb_stor_dbg(us, "Soft reset done\n"); return result; } @@ -1299,8 +1297,6 @@ static int usb_stor_reset_common(struct us_data *us, int usb_stor_CB_reset(struct us_data *us) { - US_DEBUGP("%s called\n", __func__); - memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); us->iobuf[0] = SEND_DIAGNOSTIC; us->iobuf[1] = 4; @@ -1315,8 +1311,6 @@ EXPORT_SYMBOL_GPL(usb_stor_CB_reset); */ int usb_stor_Bulk_reset(struct us_data *us) { - US_DEBUGP("%s called\n", __func__); - return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, NULL, 0); @@ -1336,16 +1330,17 @@ int usb_stor_port_reset(struct us_data *us) result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); if (result < 0) - US_DEBUGP("unable to lock device for reset: %d\n", result); + usb_stor_dbg(us, "unable to lock device for reset: %d\n", + result); else { /* Were we disconnected while waiting for the lock? */ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { result = -EIO; - US_DEBUGP("No reset during disconnect\n"); + usb_stor_dbg(us, "No reset during disconnect\n"); } else { result = usb_reset_device(us->pusb_dev); - US_DEBUGP("usb_reset_device returns %d\n", - result); + usb_stor_dbg(us, "usb_reset_device returns %d\n", + result); } usb_unlock_device(us->pusb_dev); } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index d6bee40..a9b7fc3 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -183,7 +183,6 @@ int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) /* Wait until no command is running */ mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_SUSPEND); @@ -201,7 +200,6 @@ int usb_stor_resume(struct usb_interface *iface) mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); @@ -214,8 +212,6 @@ int usb_stor_reset_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __func__); - /* Report the reset to the SCSI core */ usb_stor_report_bus_reset(us); @@ -236,8 +232,6 @@ int usb_stor_pre_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __func__); - /* Make sure no command runs during the reset */ mutex_lock(&us->dev_mutex); return 0; @@ -248,8 +242,6 @@ int usb_stor_post_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __func__); - /* Report the reset to the SCSI core */ usb_stor_report_bus_reset(us); @@ -311,11 +303,11 @@ static int usb_stor_control_thread(void * __us) struct Scsi_Host *host = us_to_host(us); for (;;) { - US_DEBUGP("*** thread sleeping.\n"); + usb_stor_dbg(us, "*** thread sleeping\n"); if (wait_for_completion_interruptible(&us->cmnd_ready)) break; - US_DEBUGP("*** thread awakened.\n"); + usb_stor_dbg(us, "*** thread awakened\n"); /* lock the device pointers */ mutex_lock(&(us->dev_mutex)); @@ -327,7 +319,7 @@ static int usb_stor_control_thread(void * __us) if (us->srb == NULL) { scsi_unlock(host); mutex_unlock(&us->dev_mutex); - US_DEBUGP("-- exiting\n"); + usb_stor_dbg(us, "-- exiting\n"); break; } @@ -343,7 +335,7 @@ static int usb_stor_control_thread(void * __us) * is UNKNOWN */ if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) { - US_DEBUGP("UNKNOWN data direction\n"); + usb_stor_dbg(us, "UNKNOWN data direction\n"); us->srb->result = DID_ERROR << 16; } @@ -352,14 +344,14 @@ static int usb_stor_control_thread(void * __us) */ else if (us->srb->device->id && !(us->fflags & US_FL_SCM_MULT_TARG)) { - US_DEBUGP("Bad target number (%d:%d)\n", - us->srb->device->id, us->srb->device->lun); + usb_stor_dbg(us, "Bad target number (%d:%d)\n", + us->srb->device->id, us->srb->device->lun); us->srb->result = DID_BAD_TARGET << 16; } else if (us->srb->device->lun > us->max_lun) { - US_DEBUGP("Bad LUN (%d:%d)\n", - us->srb->device->id, us->srb->device->lun); + usb_stor_dbg(us, "Bad LUN (%d:%d)\n", + us->srb->device->id, us->srb->device->lun); us->srb->result = DID_BAD_TARGET << 16; } @@ -371,7 +363,7 @@ static int usb_stor_control_thread(void * __us) 0x00, 0x80, 0x02, 0x02, 0x1F, 0x00, 0x00, 0x00}; - US_DEBUGP("Faking INQUIRY command\n"); + usb_stor_dbg(us, "Faking INQUIRY command\n"); fill_inquiry_response(us, data_ptr, 36); us->srb->result = SAM_STAT_GOOD; } @@ -388,12 +380,12 @@ static int usb_stor_control_thread(void * __us) /* indicate that the command is done */ if (us->srb->result != DID_ABORT << 16) { - US_DEBUGP("scsi cmd done, result=0x%x\n", - us->srb->result); + usb_stor_dbg(us, "scsi cmd done, result=0x%x\n", + us->srb->result); us->srb->scsi_done(us->srb); } else { SkipForAbort: - US_DEBUGP("scsi command aborted\n"); + usb_stor_dbg(us, "scsi command aborted\n"); } /* If an abort request was received we need to signal that @@ -435,34 +427,30 @@ SkipForAbort: /* Associate our private data with the USB device */ static int associate_dev(struct us_data *us, struct usb_interface *intf) { - US_DEBUGP("-- %s\n", __func__); - /* Fill in the device-related fields */ us->pusb_dev = interface_to_usbdev(intf); us->pusb_intf = intf; us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", - le16_to_cpu(us->pusb_dev->descriptor.idVendor), - le16_to_cpu(us->pusb_dev->descriptor.idProduct), - le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); - US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n", - intf->cur_altsetting->desc.bInterfaceSubClass, - intf->cur_altsetting->desc.bInterfaceProtocol); + usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", + le16_to_cpu(us->pusb_dev->descriptor.idVendor), + le16_to_cpu(us->pusb_dev->descriptor.idProduct), + le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); + usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n", + intf->cur_altsetting->desc.bInterfaceSubClass, + intf->cur_altsetting->desc.bInterfaceProtocol); /* Store our private data in the interface */ usb_set_intfdata(intf, us); /* Allocate the control/setup and DMA-mapped buffers */ us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL); - if (!us->cr) { - US_DEBUGP("usb_ctrlrequest allocation failed\n"); + if (!us->cr) return -ENOMEM; - } us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, GFP_KERNEL, &us->iobuf_dma); if (!us->iobuf) { - US_DEBUGP("I/O buffer allocation failed\n"); + usb_stor_dbg(us, "I/O buffer allocation failed\n"); return -ENOMEM; } return 0; @@ -738,7 +726,7 @@ static int get_pipes(struct us_data *us) } if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) { - US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n"); + usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n"); return -EIO; } @@ -765,7 +753,7 @@ static int usb_stor_acquire_resources(struct us_data *us) us->current_urb = usb_alloc_urb(0, GFP_KERNEL); if (!us->current_urb) { - US_DEBUGP("URB allocation failed\n"); + usb_stor_dbg(us, "URB allocation failed\n"); return -ENOMEM; } @@ -792,20 +780,18 @@ static int usb_stor_acquire_resources(struct us_data *us) /* Release all our dynamic resources */ static void usb_stor_release_resources(struct us_data *us) { - US_DEBUGP("-- %s\n", __func__); - /* Tell the control thread to exit. The SCSI host must * already have been removed and the DISCONNECTING flag set * so that we won't accept any more commands. */ - US_DEBUGP("-- sending exit command to thread\n"); + usb_stor_dbg(us, "-- sending exit command to thread\n"); complete(&us->cmnd_ready); if (us->ctl_thread) kthread_stop(us->ctl_thread); /* Call the destructor routine, if it exists */ if (us->extra_destructor) { - US_DEBUGP("-- calling extra_destructor()\n"); + usb_stor_dbg(us, "-- calling extra_destructor()\n"); us->extra_destructor(us->extra); } @@ -817,8 +803,6 @@ static void usb_stor_release_resources(struct us_data *us) /* Dissociate from the USB device */ static void dissociate_dev(struct us_data *us) { - US_DEBUGP("-- %s\n", __func__); - /* Free the buffers */ kfree(us->cr); usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma); @@ -918,7 +902,7 @@ int usb_stor_probe1(struct us_data **pus, struct us_data *us; int result; - US_DEBUGP("USB Mass Storage device detected\n"); + usb_stor_dbg(NULL, "USB Mass Storage device detected\n"); /* * Ask the SCSI layer to allocate a host structure, with extra @@ -964,7 +948,7 @@ int usb_stor_probe1(struct us_data **pus, return 0; BadDevice: - US_DEBUGP("storage_probe() failed\n"); + usb_stor_dbg(us, "storage_probe() failed\n"); release_everything(us); return result; } @@ -981,8 +965,8 @@ int usb_stor_probe2(struct us_data *us) result = -ENXIO; goto BadDevice; } - US_DEBUGP("Transport: %s\n", us->transport_name); - US_DEBUGP("Protocol: %s\n", us->protocol_name); + usb_stor_dbg(us, "Transport: %s\n", us->transport_name); + usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name); /* fix for single-lun devices */ if (us->fflags & US_FL_SINGLE_LUN) @@ -1028,7 +1012,7 @@ int usb_stor_probe2(struct us_data *us) /* We come here if there are any problems */ BadDevice: - US_DEBUGP("storage_probe() failed\n"); + usb_stor_dbg(us, "storage_probe() failed\n"); release_everything(us); return result; } @@ -1039,7 +1023,6 @@ void usb_stor_disconnect(struct usb_interface *intf) { struct us_data *us = usb_get_intfdata(intf); - US_DEBUGP("storage_disconnect() called\n"); quiesce_and_remove_host(us); release_everything(us); } @@ -1075,9 +1058,8 @@ static int storage_probe(struct usb_interface *intf, } else { unusual_dev = &for_dynamic_ids; - US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport", - "with the Transparent SCSI protocol for dynamic id:", - id->idVendor, id->idProduct); + usb_stor_dbg(us, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n", + id->idVendor, id->idProduct); } result = usb_stor_probe1(&us, intf, id, unusual_dev); @@ -1123,13 +1105,11 @@ static int __init usb_stor_init(void) static void __exit usb_stor_exit(void) { - US_DEBUGP("usb_stor_exit() called\n"); - /* Deregister the driver * This will cause disconnect() to be called for each * attached unit */ - US_DEBUGP("-- calling usb_deregister()\n"); + usb_stor_dbg(NULL, "-- calling usb_deregister()\n"); usb_deregister(&usb_storage_driver) ; } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/