Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758535Ab3DYUaO (ORCPT ); Thu, 25 Apr 2013 16:30:14 -0400 Received: from cm-84.215.157.11.getinternet.no ([84.215.157.11]:48626 "EHLO server.arpanet.local" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754381Ab3DYUaN (ORCPT ); Thu, 25 Apr 2013 16:30:13 -0400 Date: Thu, 25 Apr 2013 22:33:20 +0200 From: Jon Arne =?utf-8?Q?J=C3=B8rgensen?= To: Mauro Carvalho Chehab Cc: Jon Arne =?utf-8?Q?J=C3=B8rgensen?= , linux-media@vger.kernel.org, jonjon.arnearne@gmail.com, linux-kernel@vger.kernel.org, hverkuil@xs4all.nl, elezegarcia@gmail.com, mkrufky@linuxtv.org, bjorn@mork.no Subject: Re: [RFC V2 1/3] [smi2021] Add gm7113c chip to the saa7115 driver Message-ID: <20130425203319.GA18656@dell.arpanet.local> References: <1366917020-18217-1-git-send-email-jonarne@jonarne.no> <1366917020-18217-2-git-send-email-jonarne@jonarne.no> <20130425171328.08c79893@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20130425171328.08c79893@redhat.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10100 Lines: 294 On Thu, Apr 25, 2013 at 05:13:28PM -0300, Mauro Carvalho Chehab wrote: > Em Thu, 25 Apr 2013 21:10:18 +0200 > Jon Arne Jørgensen escreveu: > > > The somagic device uses the gm7113c chip to digitize analog video, > > this is a clone of the saa7113 chip. > > > > The gm7113c can't be identified over i2c, so I can't rely on > > saa7115 autodetection. > > > > Signed-off-by: Jon Arne Jørgensen > > --- > > drivers/media/i2c/saa7115.c | 61 ++++++++++++++++++++++++++++++++++------- > > include/media/v4l2-chip-ident.h | 3 ++ > > 2 files changed, 54 insertions(+), 10 deletions(-) > > > > diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c > > index 6b6788c..e93b50a 100644 > > --- a/drivers/media/i2c/saa7115.c > > +++ b/drivers/media/i2c/saa7115.c > > @@ -54,7 +54,7 @@ > > > > MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); > > MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " > > - "Hans Verkuil, Mauro Carvalho Chehab"); > > + "Hans Verkuil, Mauro Carvalho Chehab, Jon Arne Jørgensen"); > > Hi Jon, > > I was told once by Greg KH that the minimal number of changes to be one > of the driver's authors is to change a significant amount of the code > (like 20% or more). > > So, I prefer if you don't change it there. > Ok, no problem. > > MODULE_LICENSE("GPL"); > > > > static bool debug; > > @@ -126,6 +126,7 @@ static int saa711x_has_reg(const int id, const u8 reg) > > return 0; > > > > switch (id) { > > + case V4L2_IDENT_GM7113C: > > case V4L2_IDENT_SAA7113: > > return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && > > reg != 0x5d && reg < 0x63; > > @@ -292,7 +293,7 @@ static const unsigned char saa7115_cfg_reset_scaler[] = { > > 0x00, 0x00 > > }; > > > > -/* ============== SAA7715 VIDEO templates ============= */ > > +/* ============== SAA7115 VIDEO templates ============= */ > > > > static const unsigned char saa7115_cfg_60hz_video[] = { > > R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ > > @@ -445,7 +446,27 @@ static const unsigned char saa7115_cfg_50hz_video[] = { > > 0x00, 0x00 > > }; > > > > -/* ============== SAA7715 VIDEO templates (end) ======= */ > > +/* ============== SAA7115 VIDEO templates (end) ======= */ > > + > > +/* ============== GM7113C VIDEO templates ============= */ > > + > > +static const unsigned char gm7113c_cfg_60hz_video[] = { > > + R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ > > + R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ > > + > > + R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ > > + 0x00, 0x00 > > +}; > > + > > +static const unsigned char gm7113c_cfg_50hz_video[] = { > > + R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ > > + R_0E_CHROMA_CNTL_1, 0x07, > > + > > + R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ > > + 0x00, 0x00 > > +}; > > + > > +/* ============== GM7113C VIDEO templates (end) ======= */ > > > > static const unsigned char saa7115_cfg_vbi_on[] = { > > R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ > > @@ -927,11 +948,17 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) > > // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. > > if (std & V4L2_STD_525_60) { > > v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); > > - saa711x_writeregs(sd, saa7115_cfg_60hz_video); > > + if (state->ident == V4L2_IDENT_GM7113C) > > + saa711x_writeregs(sd, gm7113c_cfg_60hz_video); > > + else > > + saa711x_writeregs(sd, saa7115_cfg_60hz_video); > > saa711x_set_size(sd, 720, 480); > > } else { > > v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); > > - saa711x_writeregs(sd, saa7115_cfg_50hz_video); > > + if (state->ident == V4L2_IDENT_GM7113C) > > + saa711x_writeregs(sd, gm7113c_cfg_50hz_video); > > + else > > + saa711x_writeregs(sd, saa7115_cfg_50hz_video); > > saa711x_set_size(sd, 720, 576); > > } > > > > @@ -944,7 +971,8 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) > > 011 NTSC N (3.58MHz) PAL M (3.58MHz) > > 100 reserved NTSC-Japan (3.58MHz) > > */ > > - if (state->ident <= V4L2_IDENT_SAA7113) { > > + if (state->ident <= V4L2_IDENT_SAA7113 || > > + state->ident == V4L2_IDENT_GM7113C) { > > u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; > > > > if (std == V4L2_STD_PAL_M) { > > @@ -1215,7 +1243,8 @@ static int saa711x_s_routing(struct v4l2_subdev *sd, > > input, output); > > > > /* saa7111/3 does not have these inputs */ > > - if (state->ident <= V4L2_IDENT_SAA7113 && > > + if ((state->ident <= V4L2_IDENT_SAA7113 || > > + state->ident == V4L2_IDENT_GM7113C) && > > (input == SAA7115_COMPOSITE4 || > > input == SAA7115_COMPOSITE5)) { > > return -EINVAL; > > @@ -1586,8 +1615,11 @@ static int i2c_client *client, > > > > chip_id = name[5]; > > > > + > > /* Check whether this chip is part of the saa711x series */ > > - if (memcmp(name + 1, "f711", 4)) { > > + if (memcmp(id->name + 1, "gm7113c", 7)) { > > + chip_id = 'c'; > > There are several issues on the above: > 1) "id" may be NULL on autodetect mode; > > 2) Why are you adding 1 here? > It should be, instead id->name > > 3) memcmp returns 0 if matches. So, the test is wrong. > So, It should be instead: > if (!memcmp(id->name, "gm7113c", 7)) { > > 4) Also, while that works, it seems a little hackish... > Oh, this is embarrassing. I just tried to change as little as possible in this module to make the device work. You are completely right, it's just an ugly hack. > > + } else if (memcmp(name + 1, "f711", 4)) { > > v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", > > client->addr << 1, name); > > return -ENODEV; > > @@ -1598,8 +1630,12 @@ static int saa711x_probe(struct i2c_client *client, > > v4l_warn(client, "found saa711%c while %s was expected\n", > > chip_id, id->name); > > } > > - snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); > > - v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name, > > + if (chip_id == 'c') > > especially by needing to add a weird if here. > See more below: > > > + snprintf(client->name, sizeof(client->name), "%s", id->name); > > + else > > + snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); > > + > > + v4l_info(client, "%s found (%s) @ 0x%x (%s)\n", client->name, name, > > client->addr << 1, client->adapter->name); > > > > state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL); > > @@ -1645,6 +1681,9 @@ static int saa711x_probe(struct i2c_client *client, > > state->ident = V4L2_IDENT_SAA7111A; > > } > > break; > > + case 'c': > > + state->ident = V4L2_IDENT_GM7113C; > > + break; > > The better would be to initialize state->ident earlier, together with memcmp. > > Even better: please move the detection code into a separate > routine that would internally fill state->ident and client->name > and do what's needed to detect the chip. > > That would be cleaner and will reduce a little bit the complexity > inside saa711x_probe. > > Something like: > > static int saa711x_detect_chip(struct i2c_client *client, > struct saa711x_state *state, > const struct i2c_device_id *id) > { > int i; > char chip_id, name[16]; > > /* > * Check for gm7113c (a saa7113 clone). Currently, there's no > * known way to autodetect it, so boards that use will need to > * explicitly fill the id->name field. > */ > if (id && !memcmp(id->name, "gm7113c", 7)) { > state->ident = V4L2_IDENT_GM7113C; > snprintf(client->name, sizeof(client->name), "%s", id->name); > return 0; > } > > /* Check for Philips/NXP original chips */ > for (i = 0; i < sizeof(name); i++) { > i2c_smbus_write_byte_data(client, 0, i); > name[i] = (i2c_smbus_read_byte_data(client, 0) & 0x0f) + '0'; > if (name[i] > '9') > name[i] += 'a' - '9' - 1; > } > name[i] = '\0'; > > if (memcmp(name + 1, "f711", 4)) > return -ENODEV; > > chip_id = name[5]; > > snprintf(client->name, sizeof(client->name), "saa711%c", chip_id); > > /* > * Put here the code that fills state->ident for Philips/NXP chips > */ > ... > > return 0; Yes this seems to be a much better way to do it. I will fix my code. Thank you. > } > > > case '3': > > state->ident = V4L2_IDENT_SAA7113; > > break; > > @@ -1675,6 +1714,7 @@ static int saa711x_probe(struct i2c_client *client, > > saa711x_writeregs(sd, saa7111_init); > > break; > > case V4L2_IDENT_SAA7113: > > + case V4L2_IDENT_GM7113C: > > saa711x_writeregs(sd, saa7113_init); > > break; > > default: > > @@ -1711,6 +1751,7 @@ static const struct i2c_device_id saa711x_id[] = { > > { "saa7114", 0 }, > > { "saa7115", 0 }, > > { "saa7118", 0 }, > > + { "gm7113c", 0 }, > > { } > > }; > > MODULE_DEVICE_TABLE(i2c, saa711x_id); > > diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h > > index 4ee125b..fc13d53 100644 > > --- a/include/media/v4l2-chip-ident.h > > +++ b/include/media/v4l2-chip-ident.h > > @@ -51,6 +51,9 @@ enum { > > V4L2_IDENT_SAA7114 = 104, > > V4L2_IDENT_SAA7115 = 105, > > V4L2_IDENT_SAA7118 = 108, > > + /* This chip is a chinese clone of the saa7113 chip, > > + * with some minor changes/bugs */ > > + V4L2_IDENT_GM7113C = 149, > > > > /* module saa7127: reserved range 150-199 */ > > V4L2_IDENT_SAA7127 = 157, > > > -- > > Cheers, > Mauro > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/