Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756442Ab3D1Nmi (ORCPT ); Sun, 28 Apr 2013 09:42:38 -0400 Received: from hqemgate03.nvidia.com ([216.228.121.140]:19700 "EHLO hqemgate03.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756279Ab3D1Nmf convert rfc822-to-8bit (ORCPT ); Sun, 28 Apr 2013 09:42:35 -0400 X-PGP-Universal: processed; by hqnvupgp08.nvidia.com on Sun, 28 Apr 2013 06:42:34 -0700 From: Bibek Basu To: Thierry Reding CC: "Rafael J. Wysocki" , "linus.walleij@linaro.org" , "swarren@wwwdotorg.org" , "linux-tegra@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-pm@vger.kernel.org" Date: Sun, 28 Apr 2013 19:12:28 +0530 Subject: RE: [PATCH 2/2] ARM: DT: tegra: pinctrl suspend resume hook Thread-Topic: [PATCH 2/2] ARM: DT: tegra: pinctrl suspend resume hook Thread-Index: Ac5CtyS+NAtuyek5RzOmyXj/GS74vQBW7XcA Message-ID: <77F7DB30C698A44DA22FB222C89DE941A6692E62BD@BGMAIL01.nvidia.com> References: <1366740542-26127-1-git-send-email-bbasu@nvidia.com> <1366740542-26127-2-git-send-email-bbasu@nvidia.com> <20130426194908.GA3302@avionic-0098.mockup.avionic-design.de> In-Reply-To: <20130426194908.GA3302@avionic-0098.mockup.avionic-design.de> Accept-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: acceptlanguage: en-US MIME-Version: 1.0 Content-Language: en-US Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5591 Lines: 161 > -----Original Message----- > From: Thierry Reding [mailto:thierry.reding@avionic-design.de] > Sent: Saturday, April 27, 2013 1:19 AM > To: Bibek Basu > Cc: Rafael J. Wysocki; linus.walleij@linaro.org; swarren@wwwdotorg.org; > linux-tegra@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > pm@vger.kernel.org > Subject: Re: [PATCH 2/2] ARM: DT: tegra: pinctrl suspend resume hook > > * PGP Signed by an unknown key > > On Tue, Apr 23, 2013 at 11:39:02PM +0530, Bibek Basu wrote: > > Make pinmux as the first node of tegra DT so as to achieve pinctrl as > > last device to suspend and first device to resume. > > I don't think this is a good idea. For one it encodes Linux specific > implementation details within the device tree. Furthermore I seem to > remember that the device tree makes no guarantees that the order of nodes > in the blob is the same as the order in the DTS. > > That said I don't have a good alternative. Perhaps one solution would be to > use suspend_late() and resume_early() for the pinmux driver since they will > be called after and before the suspend() and resume() callbacks of all other > devices, respectively. Other than that I wasn't able to find anything about > forcing a particular order during suspend and resume. > > Cc'ing Rafael and the linux-pm mailing list, maybe somebody among them > knows a proper solution. > Stephen actually suggested me earlier to add dummy pinmux state on all dependent devices node. And that will make sure that dependency of driver prevails. I tried that but I was not getting the desired result. Can anyone tell me correct syntax for adding dummy state? Regards Bibek > Thierry > > > > > Signed-off-by: Bibek Basu > > --- > > arch/arm/boot/dts/tegra114.dtsi | 12 ++++++------ > > arch/arm/boot/dts/tegra20.dtsi | 16 ++++++++-------- > > arch/arm/boot/dts/tegra30.dtsi | 13 +++++++------ > > 3 files changed, 21 insertions(+), 20 deletions(-) > > > > diff --git a/arch/arm/boot/dts/tegra114.dtsi > > b/arch/arm/boot/dts/tegra114.dtsi index a58a761..36596ae 100644 > > --- a/arch/arm/boot/dts/tegra114.dtsi > > +++ b/arch/arm/boot/dts/tegra114.dtsi > > @@ -11,6 +11,12 @@ > > serial3 = &uartd; > > }; > > > > + pinmux: pinmux { > > + compatible = "nvidia,tegra114-pinmux"; > > + reg = <0x70000868 0x148 /* Pad control > registers */ > > + 0x70003000 0x40c>; /* Mux registers */ > > + }; > > + > > host1x { > > compatible = "nvidia,tegra114-host1x", "simple-bus"; > > reg = <0x50000000 0x00028000>; > > @@ -165,12 +171,6 @@ > > interrupt-controller; > > }; > > > > - pinmux: pinmux { > > - compatible = "nvidia,tegra114-pinmux"; > > - reg = <0x70000868 0x148 /* Pad control > registers */ > > - 0x70003000 0x40c>; /* Mux registers */ > > - }; > > - > > /* > > * There are two serial driver i.e. 8250 based simple serial > > * driver and APB DMA based serial driver for higher baudrate diff > > --git a/arch/arm/boot/dts/tegra20.dtsi > > b/arch/arm/boot/dts/tegra20.dtsi index a5a9615..6d8a663 100644 > > --- a/arch/arm/boot/dts/tegra20.dtsi > > +++ b/arch/arm/boot/dts/tegra20.dtsi > > @@ -12,6 +12,14 @@ > > serial4 = &uarte; > > }; > > > > + pinmux: pinmux { > > + compatible = "nvidia,tegra20-pinmux"; > > + reg = <0x70000014 0x10 /* Tri-state registers */ > > + 0x70000080 0x20 /* Mux registers */ > > + 0x700000a0 0x14 /* Pull-up/down registers */ > > + 0x70000868 0xa8>; /* Pad control registers */ > > + }; > > + > > host1x { > > compatible = "nvidia,tegra20-host1x", "simple-bus"; > > reg = <0x50000000 0x00024000>; > > @@ -196,14 +204,6 @@ > > interrupt-controller; > > }; > > > > - pinmux: pinmux { > > - compatible = "nvidia,tegra20-pinmux"; > > - reg = <0x70000014 0x10 /* Tri-state registers */ > > - 0x70000080 0x20 /* Mux registers */ > > - 0x700000a0 0x14 /* Pull-up/down registers */ > > - 0x70000868 0xa8>; /* Pad control registers */ > > - }; > > - > > das { > > compatible = "nvidia,tegra20-das"; > > reg = <0x70000c00 0x80>; > > diff --git a/arch/arm/boot/dts/tegra30.dtsi > > b/arch/arm/boot/dts/tegra30.dtsi index 9f33086..b4b79f0 100644 > > --- a/arch/arm/boot/dts/tegra30.dtsi > > +++ b/arch/arm/boot/dts/tegra30.dtsi > > @@ -12,6 +12,13 @@ > > serial4 = &uarte; > > }; > > > > + pinmux: pinmux { > > + compatible = "nvidia,tegra30-pinmux"; > > + reg = <0x70000868 0xd4 /* Pad control registers */ > > + 0x70003000 0x3e4>; /* Mux registers */ > > + }; > > + > > + > > host1x { > > compatible = "nvidia,tegra30-host1x", "simple-bus"; > > reg = <0x50000000 0x00024000>; > > @@ -216,12 +223,6 @@ > > interrupt-controller; > > }; > > > > - pinmux: pinmux { > > - compatible = "nvidia,tegra30-pinmux"; > > - reg = <0x70000868 0xd4 /* Pad control registers */ > > - 0x70003000 0x3e4>; /* Mux registers */ > > - }; > > - > > /* > > * There are two serial driver i.e. 8250 based simple serial > > * driver and APB DMA based serial driver for higher baudrate > > -- > > 1.8.1.5 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-tegra" > > in the body of a message to majordomo@vger.kernel.org More > majordomo > > info at http://vger.kernel.org/majordomo-info.html > > > > > > * Unknown Key > * 0x7F3EB3A1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/