Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761076Ab3EBTnk (ORCPT ); Thu, 2 May 2013 15:43:40 -0400 Received: from mail.free-electrons.com ([94.23.35.102]:37035 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759293Ab3EBTnj (ORCPT ); Thu, 2 May 2013 15:43:39 -0400 From: Gregory CLEMENT To: Jason Cooper , Andrew Lunn Cc: Thomas Petazzoni , Nobuhiro Iwamatsu , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Gregory CLEMENT Subject: [PATCH] ARM: kirkwood: add button for OpenBlock A6 Date: Thu, 2 May 2013 21:43:22 +0200 Message-Id: <1367523802-16372-1-git-send-email-gregory.clement@free-electrons.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1090 Lines: 39 The OpenBlocks A6 board has one software-controlled button on the front side, labeled "INIT", so we add minimal support for this button in the kernel. Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index d27f724..627d8d0 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -209,4 +209,17 @@ gpios = <&gpio1 11 1>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 6 0>; + }; + }; + }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/