Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933811Ab3ECOfI (ORCPT ); Fri, 3 May 2013 10:35:08 -0400 Received: from mail-wi0-f172.google.com ([209.85.212.172]:35762 "EHLO mail-wi0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933763Ab3ECOfF (ORCPT ); Fri, 3 May 2013 10:35:05 -0400 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: arnd@arndb.de, linus.walleij@stericsson.com, srinidhi.kasagar@stericsson.com, Lee Jones , Felipe Balbi , linux-usb@vger.kernel.org Subject: [PATCH 45/63] usb: musb: ux500: move the MUSB HDRC configuration into the driver Date: Fri, 3 May 2013 15:32:31 +0100 Message-Id: <1367591569-32197-46-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1367591569-32197-1-git-send-email-lee.jones@linaro.org> References: <1367591569-32197-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2092 Lines: 70 The MUSB HDRC configuration never changes between each of the ux500 supported platforms, so there's little point passing it though platform data. If we set it in the driver instead, we can make good use of it when booting with either ATAGs or Device Tree. Cc: Felipe Balbi Cc: linux-usb@vger.kernel.org Acked-by: Linus Walleij Acked-by: Fabio Baltieri Signed-off-by: Lee Jones --- arch/arm/mach-ux500/usb.c | 8 -------- drivers/usb/musb/ux500.c | 8 ++++++++ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 8aff9a4..4f68a9c 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -76,16 +76,8 @@ static struct ux500_musb_board_data musb_board_data = { static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); -static struct musb_hdrc_config musb_hdrc_config = { - .multipoint = true, - .dyn_fifo = true, - .num_eps = 16, - .ram_bits = 16, -}; - static struct musb_hdrc_platform_data musb_platform_data = { .mode = MUSB_OTG, - .config = &musb_hdrc_config, .board_data = &musb_board_data, }; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 13a3929..4a8f5c9 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -29,6 +29,13 @@ #include "musb_core.h" +static struct musb_hdrc_config ux500_musb_hdrc_config = { + .multipoint = true, + .dyn_fifo = true, + .num_eps = 16, + .ram_bits = 16, +}; + struct ux500_glue { struct device *dev; struct platform_device *musb; @@ -123,6 +130,7 @@ static int ux500_probe(struct platform_device *pdev) glue->clk = clk; pdata->platform_ops = &ux500_ops; + pdata->config = &ux500_musb_hdrc_config; platform_set_drvdata(pdev, glue); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/