Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933466Ab3ECOrT (ORCPT ); Fri, 3 May 2013 10:47:19 -0400 Received: from mail-wi0-f182.google.com ([209.85.212.182]:39818 "EHLO mail-wi0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933397Ab3ECOeF (ORCPT ); Fri, 3 May 2013 10:34:05 -0400 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: arnd@arndb.de, linus.walleij@stericsson.com, srinidhi.kasagar@stericsson.com, Lee Jones Subject: [PATCH 20/63] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg() Date: Fri, 3 May 2013 15:32:06 +0100 Message-Id: <1367591569-32197-21-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1367591569-32197-1-git-send-email-lee.jones@linaro.org> References: <1367591569-32197-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6301 Lines: 190 All configuration left in d40_phy_cfg() is runtime configurable and there is already a call into it from d40_runtime_config(), so let's rely on that. Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones --- drivers/dma/ste_dma40.c | 14 +++--- drivers/dma/ste_dma40_ll.c | 101 +++++++++++++++++++++----------------------- drivers/dma/ste_dma40_ll.h | 3 +- 3 files changed, 58 insertions(+), 60 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 6df1b01..8bff463 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2027,6 +2027,14 @@ static int d40_config_memcpy(struct d40_chan *d40c) } else if (dma_has_cap(DMA_MEMCPY, cap) && dma_has_cap(DMA_SLAVE, cap)) { d40c->dma_cfg = dma40_memcpy_conf_phy; + + /* Generate interrrupt at end of transfer or relink. */ + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); + + /* Generate interrupt on error. */ + d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); + } else { chan_err(d40c, "No memcpy\n"); return -EINVAL; @@ -2436,9 +2444,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) } pm_runtime_get_sync(d40c->base->dev); - /* Fill in basic CFG register values */ - d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg, - &d40c->dst_def_cfg, chan_is_logical(d40c)); d40_set_prio_realtime(d40c); @@ -2802,8 +2807,7 @@ static int d40_set_runtime_config(struct dma_chan *chan, if (chan_is_logical(d40c)) d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); else - d40_phy_cfg(cfg, &d40c->src_def_cfg, - &d40c->dst_def_cfg, false); + d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); /* These settings will take precedence later */ d40c->runtime_addr = config_addr; diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 435a223..ab5a2a7 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, } -/* Sets up SRC and DST CFG register for both logical and physical channels */ -void d40_phy_cfg(struct stedma40_chan_cfg *cfg, - u32 *src_cfg, u32 *dst_cfg, bool is_log) +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) { u32 src = 0; u32 dst = 0; - if (!is_log) { - /* Physical channel */ - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { - /* Set master port to 1 */ - src |= 1 << D40_SREG_CFG_MST_POS; - src |= D40_TYPE_TO_EVENT(cfg->dev_type); - - if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - src |= 1 << D40_SREG_CFG_PHY_TM_POS; - else - src |= 3 << D40_SREG_CFG_PHY_TM_POS; - } - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { - /* Set master port to 1 */ - dst |= 1 << D40_SREG_CFG_MST_POS; - dst |= D40_TYPE_TO_EVENT(cfg->dev_type); - - if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - dst |= 1 << D40_SREG_CFG_PHY_TM_POS; - else - dst |= 3 << D40_SREG_CFG_PHY_TM_POS; - } - /* Interrupt on end of transfer for destination */ - dst |= 1 << D40_SREG_CFG_TIM_POS; - - /* Generate interrupt on error */ - src |= 1 << D40_SREG_CFG_EIM_POS; - dst |= 1 << D40_SREG_CFG_EIM_POS; - - /* PSIZE */ - if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { - src |= 1 << D40_SREG_CFG_PHY_PEN_POS; - src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; - } - if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; - dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; - } - - /* Element size */ - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; - - /* Set the priority bit to high for the physical channel */ - if (cfg->high_priority) { - src |= 1 << D40_SREG_CFG_PRI_POS; - dst |= 1 << D40_SREG_CFG_PRI_POS; - } + if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + /* Set master port to 1 */ + src |= 1 << D40_SREG_CFG_MST_POS; + src |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + src |= 1 << D40_SREG_CFG_PHY_TM_POS; + else + src |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + /* Set master port to 1 */ + dst |= 1 << D40_SREG_CFG_MST_POS; + dst |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + dst |= 1 << D40_SREG_CFG_PHY_TM_POS; + else + dst |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + /* Interrupt on end of transfer for destination */ + dst |= 1 << D40_SREG_CFG_TIM_POS; + + /* Generate interrupt on error */ + src |= 1 << D40_SREG_CFG_EIM_POS; + dst |= 1 << D40_SREG_CFG_EIM_POS; + + /* PSIZE */ + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { + src |= 1 << D40_SREG_CFG_PHY_PEN_POS; + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; + } + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { + dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; + } + + /* Element size */ + src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; + dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; + + /* Set the priority bit to high for the physical channel */ + if (cfg->high_priority) { + src |= 1 << D40_SREG_CFG_PRI_POS; + dst |= 1 << D40_SREG_CFG_PRI_POS; } if (cfg->src_info.big_endian) diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index fdde8ef..1b47312 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -432,8 +432,7 @@ enum d40_lli_flags { void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, - u32 *dst_cfg, - bool is_log); + u32 *dst_cfg); void d40_log_cfg(struct stedma40_chan_cfg *cfg, u32 *lcsp1, -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/