Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 27 Sep 2002 17:25:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 27 Sep 2002 17:25:50 -0400 Received: from smtp2.us.dell.com ([143.166.85.133]:62364 "EHLO smtp2.us.dell.com") by vger.kernel.org with ESMTP id ; Fri, 27 Sep 2002 17:25:10 -0400 Date: Fri, 27 Sep 2002 16:30:29 -0500 (CDT) From: Matt Domsch X-X-Sender: mdomsch@humbolt.us.dell.com Reply-To: Matt Domsch To: linux-kernel@vger.kernel.org Subject: [RFC][PATCH] x86 BIOS Enhanced Disk Device (EDD) polling In-Reply-To: <20BF5713E14D5B48AA289F72BD372D6821CE34@AUSXMPC122.aus.amer.dell.com> Message-ID: X-GPG-Fingerprint: 17A4 17D0 81F5 4B5F DB1C AEF8 21AB EEF7 92F0 FC09 X-GPG-Key: http://domsch.com/mdomsch_pub.asc MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34632 Lines: 1083 x86 systems suffer from a disconnect between what BIOS believes is the boot disk, and what Linux thinks BIOS thinks is the boot disk. BIOS Enhanced Disk Device Services (EDD) 3.0 provides the ability for disk adapter BIOSs to tell the OS what it believes is the boot disk. While this isn't widely implemented in BIOSs yet, it's time that Linux received support to be ready as BIOSs with this feature do become available. EDD works by providing the bus (PCI, PCI-X, ISA, InfiniBand, PCI Express, or HyperTransport) location (e.g. PCI 02:01.0) and interface (ATAPI, ATA, SCSI, USB, 1394, FibreChannel, I2O, RAID, SATA) location (e.g. SCSI ID 5 LUN 0) information for each BIOS int13 device. The patch below creates CONFIG_EDD, that when defined, makes the calls to retrieve and store this information. It then exports it via driverfs. . |-- bus | `-- system | |-- devices | | |-- int13_dev80 -> ../../../root/bios/int13_dev80 | | |-- int13_dev81 -> ../../../root/bios/int13_dev81 | `-- drivers | |-- edd `-- root |-- bios | |-- int13_dev80 | | |-- host_bus | | |-- info | | |-- interface | | |-- name | | `-- power | |-- int13_dev81 | | |-- host_bus | | |-- info | | |-- interface | | |-- name | | `-- power | |-- name | `-- power (Yes, the system bus isn't the right place for them to go, but it must go on some bus, and eventually it will get moved to a better place.) The 'info' file contains the full set of information returned by BIOS with extra error reporting. This exists for vendor BIOS debugging purposes. The 'host-bus' file contains the PCI (or ISA, HyperTransport, ...) identifying information, as BIOS knows it. The 'interface' file contains the SCSI (or IDE, USB, ...) identifying information, as BIOS knows it. $ cat int13_dev80/host_bus PCI 02:01.0 channel: 0 $ cat int13_dev80/interface SCSI id: 0 lun: 0 $ cat int13_dev80/info 80 30 01 00 .0.. 1e 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 3a b9 8b 08 00 00 00 00 00 02 ff ff ff ff be dd :............... 2c 00 00 00 50 43 49 00 53 43 53 49 00 00 00 00 ,...PCI.SCSI.... 02 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 28 .........( version: 3.0 Extensions: Fixed disk access Info Flags: dma_boundry_error_transparent write_verify num_default_cylinders: 0 num_default_heads: 0 sectors_per_track: 0 number_of_sectors: 88bb93a PCI 02:01.0 channel: 0 SCSI id: 0 lun: 0 Warning: Spec violation. Key should be 0xBEDD, is 0xDDBE $ cat int13_dev81/host_bus PCI 04:00.0 channel: 0 $ cat int13_dev81/interface SCSI id: 0 lun: 0 $ cat int13_dev81/info 81 30 01 00 .0.. 1e 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 3a 05 00 00 00 00 00 02 ff ff ff ff dd be ..:............. 2c 00 00 00 50 43 49 20 53 43 53 49 20 20 20 20 ,...PCI SCSI 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 87 .......... version: 3.0 Extensions: Fixed disk access Info Flags: dma_boundry_error_transparent write_verify num_default_cylinders: 0 num_default_heads: 0 sectors_per_track: 0 number_of_sectors: 53ac000 PCI 04:00.0 channel: 0 SCSI id: 0 lun: 0 In the above case, BIOS int13 device 80 (the boot disk) believes it is on PCI 02:01.0, SCSI bus 0, ID 0 LUN 0 (in this case it's an Adaptec 39160 add-in card). Likewise, device 81 believes it's at PCI 04:00.0, channel 0, ID 0, LUN 0 (a Dell PERC3/QC card). The Adaptec BIOS has some cleanup work to do yet, The PERC3/QC BIOS has made the required changes to fully support EDD now. At most 6 BIOS devices are reported, as that fills the space that's left in the empty_zero_page. In general you only care about device 80h, though for software RAID1 knowing what 81h is might be useful also. The major changes implemented in this patch: arch/i386/boot/setup.S - int13 real mode calls store results in empty_zero_page arch/i386/kernel/setup.c - copy results from empty_zero_page to local storage arch/i386/kernel/edd.c - export results via driverfs If you use this, please send reports of success/failure, and the adapter types and BIOS versions, to edd30@domsch.com. I'm keeping a tally at http://domsch.com/linux/edd30/results.html. Documentation/i386/zero-page.txt | 2 arch/i386/Config.help | 10 arch/i386/boot/setup.S | 46 +++ arch/i386/config.in | 4 arch/i386/defconfig | 1 arch/i386/kernel/Makefile | 1 arch/i386/kernel/edd.c | 522 +++++++++++++++++++++++++++++++++++++++ arch/i386/kernel/i386_ksyms.c | 6 arch/i386/kernel/setup.c | 20 + include/asm-i386/edd.h | 162 ++++++++++++ include/asm-i386/setup.h | 2 11 files changed, 776 insertions(+) Patch against BK-current: http://domsch.com/linux/edd30/edd-driverfs-3.patch http://domsch.com/linux/edd30/edd-driverfs-3.patch.sign BK: http://mdomsch.bkbits.net/linux-2.5-edd Future work includes exporting a symlink from the EDD device to the actual disk device in driverfs. I'll continue working with Patrick Mochel, Greg KH, and the appropriate subsystem maintainers on the details needed to make this work well. Feedback appreciated. I'd like to see this included before the 2.5 feature freeze if at all possible. Thanks, Matt -- Matt Domsch Sr. Software Engineer, Lead Engineer, Architect Dell Linux Solutions www.dell.com/linux Linux on Dell mailing lists @ http://lists.us.dell.com diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/Documentation/i386/zero-page.txt linux-2.5-edd/Documentation/i386/zero-page.txt --- linux-2.5/Documentation/i386/zero-page.txt Tue Sep 10 11:41:37 2002 +++ linux-2.5-edd/Documentation/i386/zero-page.txt Fri Sep 27 15:53:05 2002 @@ -31,6 +31,7 @@ 0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb 0x1e8 char number of entries in E820MAP (below) +0x1e9 unsigned char number of entries in EDDBUF (below) 0x1f1 char size of setup.S, number of sectors 0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0) 0x1f4 unsigned short size of compressed kernel-part in the @@ -66,6 +67,7 @@ 0x220 4 bytes (setup.S) 0x224 unsigned short setup.S heap end pointer 0x2d0 - 0x600 E820MAP +0x600 - 0x7D4 EDDBUF (setup.S) 0x800 string, 2K max COMMAND_LINE, the kernel commandline as copied using CL_OFFSET. diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/Config.help linux-2.5-edd/arch/i386/Config.help --- linux-2.5/arch/i386/Config.help Thu Sep 26 21:44:44 2002 +++ linux-2.5-edd/arch/i386/Config.help Fri Sep 27 15:53:06 2002 @@ -981,3 +981,13 @@ absence of features. For more information take a look at Documentation/swsusp.txt. + +CONFIG_EDD + Say Y or M here if you want to enable BIOS Enhanced Disk Device + Services real mode BIOS calls to determine which disk + BIOS tries boot from. This feature creates a /proc/edd directory + and files for each BIOS device detected. + + This option is experimental, and most disk controller BIOS + vendors do not yet implement this feature. + diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/boot/setup.S linux-2.5-edd/arch/i386/boot/setup.S --- linux-2.5/arch/i386/boot/setup.S Tue Sep 10 11:41:39 2002 +++ linux-2.5-edd/arch/i386/boot/setup.S Fri Sep 27 15:53:06 2002 @@ -44,6 +44,8 @@ * * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes * by Robert Schwebel, December 2001 + * + * BIOS EDD support September 2002 by Matt Domsch * */ @@ -53,6 +55,7 @@ #include #include #include +#include #include /* Signature words to ensure LILO loaded us right */ @@ -541,6 +544,49 @@ no_32_apm_bios: andw $0xfffd, (76) # remove 32 bit support bit done_apm_bios: +#endif + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) +# Do the BIOS EDD calls +# This code is sensitive to the size of the structs in edd.h +edd_start: + # %ds points to the bootsector + # result buffer for fn48 + movw $EDDBUF+EDDEXTSIZE, %si # in ds:si, fn41 results + # kept just before that + movb $0, (EDDNR) # zero value at EDDNR + movb $0x80, %dl # BIOS device 0x80 + +edd_check_ext: + movb $0x41, %ah # Function 41 + movw $0x55aa, %bx # magic + int $0x13 # make the call + jc edd_done # no more BIOS devices + + cmpw $0xAA55, %bx # is magic right? + jne edd_next # nope, next... + + movb %dl, %ds:-4(%si) # store device number + movb %ah, %ds:-3(%si) # store version + movw %cx, %ds:-2(%si) # store extensions + incb (EDDNR) # note that we stored something + +edd_get_device_params: + movw $EDDPARMSIZE, %ds:(%si) # put size + movb $0x48, %ah # Function 48 + int $0x13 # make the call + # Don't check for fail return + # it doesn't matter. + movw %si, %ax # increment si + addw $EDDPARMSIZE+EDDEXTSIZE, %ax + movw %ax, %si + +edd_next: + incb %dl # increment to next device + cmpb $EDDMAXNR, (EDDNR) # Out of space? + jb edd_check_ext # keep looping + +edd_done: #endif # Now we want to move to protected mode ... diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/config.in linux-2.5-edd/arch/i386/config.in --- linux-2.5/arch/i386/config.in Thu Sep 26 21:44:44 2002 +++ linux-2.5-edd/arch/i386/config.in Fri Sep 27 15:53:06 2002 @@ -198,6 +198,10 @@ tristate '/dev/cpu/*/msr - Model-specific register support' CONFIG_X86_MSR tristate '/dev/cpu/*/cpuid - CPU information support' CONFIG_X86_CPUID +if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'BIOS Enhanced Disk Device calls determine boot disk (EXPERIMENTAL)' CONFIG_EDD +fi + choice 'High Memory Support' \ "off CONFIG_NOHIGHMEM \ 4GB CONFIG_HIGHMEM4G \ diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/defconfig linux-2.5-edd/arch/i386/defconfig --- linux-2.5/arch/i386/defconfig Thu Sep 26 21:44:44 2002 +++ linux-2.5-edd/arch/i386/defconfig Fri Sep 27 15:53:06 2002 @@ -70,6 +70,7 @@ # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set +# CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/Makefile linux-2.5-edd/arch/i386/kernel/Makefile --- linux-2.5/arch/i386/kernel/Makefile Fri Sep 20 13:11:58 2002 +++ linux-2.5-edd/arch/i386/kernel/Makefile Wed Sep 25 11:15:18 2002 @@ -26,6 +26,7 @@ obj-$(CONFIG_X86_IO_APIC) += io_apic.o obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o obj-$(CONFIG_X86_NUMAQ) += numaq.o +obj-$(CONFIG_EDD) += edd.o EXTRA_AFLAGS := -traditional diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/edd.c linux-2.5-edd/arch/i386/kernel/edd.c --- linux-2.5/arch/i386/kernel/edd.c Wed Dec 31 18:00:00 1969 +++ linux-2.5-edd/arch/i386/kernel/edd.c Fri Sep 27 15:53:06 2002 @@ -0,0 +1,522 @@ +/* + * BIOS Enhanced Disk Device Services + * conformant to T13 Committee, Project D1572 www.t13.org + * + * Copyright (C) 2002 Dell Computer Corporation + * + * This code takes information provided by BIOS EDD calls + * made in setup.S, copied to safe structures in setup.c, + * and presents it in driverfs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Matt Domsch "); +MODULE_DESCRIPTION("driver model interface to BIOS EDD information"); +MODULE_LICENSE("GPL"); + +#define EDD_VERSION "0.04 2002-Sep-27" + +static struct device *edd_devices[EDDMAXNR]; +static struct device bios_device = { + .name = "BIOS devices", + .bus_id = "bios", + .dir = { + .mode = (S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO), + }, +}; + +/* + * FIXME - this uses system_bus_type because + * platform_bus_type isn't exported (yet) and + * it'll likely wind up in named bus type yet +*/ + +static struct device_driver edd_driver = { + .name = "edd", + .bus = &system_bus_type, + .dir = { + .mode = (S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO), + } +}; + +/* + * EDD devices are exactly struct device. + * EDD device attributes are exactly struct device_attribute + */ + +#define EDD_DEVICE_ATTR(_name,_mode,_show) \ +struct device_attribute edd_attr_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ +}; + +#define to_edd_attr(_attr) container_of(_attr,struct device_attribute,attr) +#define to_edd_device(_dir) container_of(_dir,struct device,dir) + +static ssize_t +edd_attr_show(struct driver_dir_entry * dir, struct attribute * attr, + char * buf, size_t count, loff_t off) +{ + struct device * dev = to_edd_device(dir); + struct device_attribute * edd_attr = to_edd_attr(attr); + ssize_t ret = 0; + + if (edd_attr->show) + ret = edd_attr->show(dev,buf,count,off); + return ret; +} + +static struct driverfs_ops edd_attr_ops = { + .show = edd_attr_show, +}; + +static int +edd_dump_raw_data(char *b, void *data, int length) +{ + char *orig_b = b; + char buffer1[80], buffer2[80], *b1, *b2, c; + unsigned char *p = data; + unsigned long column=0; + int length_printed = 0; + const char maxcolumn = 16; + while (length_printed < length) { + b1 = buffer1; + b2 = buffer2; + for (column = 0; + column < maxcolumn && length_printed < length; + column ++) { + b1 += sprintf(b1, "%02x ",(unsigned char) *p); + if (*p < 32 || *p > 126) c = '.'; + else c = *p; + b2 += sprintf(b2, "%c", c); + p++; + length_printed++; + } + /* pad out the line */ + for (; column < maxcolumn; column++) + { + b1 += sprintf(b1, " "); + b2 += sprintf(b2, " "); + } + + b += sprintf(b, "%s\t%s\n", buffer1, buffer2); + } + return (b - orig_b); +} + +/** + * __edd_unparse_interface() + * + * Returns: number of bytes written, or 0 on failure + */ +static ssize_t +__edd_unparse_host_bus(struct device *dev, char *buf, size_t count, loff_t off) +{ + struct edd_info *edd=dev_get_drvdata(dev); + char *p = buf; + int i; + for (i=0; i<4; i++) { + if (isprint(edd->params.host_bus_type[i])) { + p += sprintf(p, "%c", edd->params.host_bus_type[i]); + } else { + p += sprintf(p, " "); + } + } + + if (!strncmp(edd->params.host_bus_type, "ISA", 3)) { + p += sprintf(p, "\tbase_address: %x\n", + edd->params.interface_path.isa.base_address); + } else if (!strncmp(edd->params.host_bus_type, "PCIX", 4) || + !strncmp(edd->params.host_bus_type, "PCI", 3)) { + p += sprintf(p, + "\t%02x:%02x.%01x channel: %x\n", + edd->params.interface_path.pci.bus, + edd->params.interface_path.pci.slot, + edd->params.interface_path.pci.function, + edd->params.interface_path.pci.channel); + } else if (!strncmp(edd->params.host_bus_type, "IBND", 4) || + !strncmp(edd->params.host_bus_type, "XPRS", 4) || + !strncmp(edd->params.host_bus_type, "HTPT", 4)) { + p += sprintf(p, + "\tTBD: %llx\n", + edd->params.interface_path.ibnd.reserved); + + } + else { + p += sprintf(p, "\tunknown: %llx\n", + edd->params.interface_path.unknown.reserved); + } + return (p - buf); +} + +/** + * edd_show_host_bus() - returns interface path to user space + * + * Returns: number of bytes written, or 0 on failure + */ +static ssize_t +edd_show_host_bus(struct device *dev, char *buf, size_t count, loff_t off) +{ + struct edd_info *edd=dev_get_drvdata(dev); + uint8_t c=0; + int i, nonzero_path=0; + if (!dev || !edd || !buf || off) { + return 0; + } + + if (! (edd->params.key == 0xBEDD || edd->params.key == 0xDDBE)) { + return 0; + } + + for (i=30; i<=73; i++) { + c = *(((uint8_t *)edd)+i+4); + if (c) { + nonzero_path++; + break; + } + } + if (!nonzero_path) { + return 0; + } + return __edd_unparse_host_bus(dev, buf, count, off); +} + +/** + * __edd_unparse_interface() + * + * Returns: number of bytes written, or 0 on failure + */ +static ssize_t +__edd_unparse_interface(struct device *dev, char *buf, size_t count, loff_t off) +{ + struct edd_info *edd=dev_get_drvdata(dev); + char *p = buf; + int i; + + for (i=0; i<8; i++) { + if (isprint(edd->params.interface_type[i])) { + p += sprintf(p, "%c", edd->params.interface_type[i]); + } else { + p += sprintf(p, " "); + } + } + if (!strncmp(edd->params.interface_type, "ATAPI", 5)) { + p += sprintf(p, "\tdevice: %x lun: %x\n", + edd->params.device_path.atapi.device, + edd->params.device_path.atapi.lun); + } else if (!strncmp(edd->params.interface_type, "ATA", 3)) { + p += sprintf(p, "\tdevice: %x\n", + edd->params.device_path.ata.device); + } else if (!strncmp(edd->params.interface_type, "SCSI", 4)) { + p += sprintf(p, "\tid: %x lun: %llx\n", + edd->params.device_path.scsi.id, + edd->params.device_path.scsi.lun); + } else if (!strncmp(edd->params.interface_type, "USB", 3)) { + p += sprintf(p, "\tserial_number: %llx\n", + edd->params.device_path.usb.serial_number); + } else if (!strncmp(edd->params.interface_type, "1394", 4)) { + p += sprintf(p, "\teui: %llx\n", + edd->params.device_path.i1394.eui); + } else if (!strncmp(edd->params.interface_type, "FIBRE", 5)) { + p += sprintf(p, "\twwid: %llx lun: %llx\n", + edd->params.device_path.fibre.wwid, + edd->params.device_path.fibre.lun); + } else if (!strncmp(edd->params.interface_type, "I2O", 3)) { + p += sprintf(p, "\tidentity_tag: %llx\n", + edd->params.device_path.i2o.identity_tag); + } else if (!strncmp(edd->params.interface_type, "RAID", 4)) { + p += sprintf(p, "\tidentity_tag: %x\n", + edd->params.device_path.raid.array_number); + } else if (!strncmp(edd->params.interface_type, "SATA", 4)) { + p += sprintf(p, "\tdevice: %x\n", + edd->params.device_path.sata.device); + } else { + p += sprintf(p, "\tunknown: %llx %llx\n", + edd->params.device_path.unknown.reserved1, + edd->params.device_path.unknown.reserved2); + } + + return (p - buf); +} + +/** + * edd_show_interface() + * + * Returns: number of bytes written, or 0 on failure + */ +static ssize_t +edd_show_interface(struct device *dev, char *buf, size_t count, loff_t off) +{ + struct edd_info *edd=dev_get_drvdata(dev); + uint8_t c=0; + int i, nonzero_path=0; + if (!dev || !edd || !buf || off) { + return 0; + } + + if (! (edd->params.key == 0xBEDD || edd->params.key == 0xDDBE)) { + return 0; + } + + for (i=30; i<=73; i++) { + c = *(((uint8_t *)edd)+i+4); + if (c) { + nonzero_path++; + break; + } + } + if (!nonzero_path) { + return 0; + } + return __edd_unparse_interface(dev, buf, count, off); +} + +/** + * edd_info_show() - unparses EDD information, returned to user-space + * + * Rather verbose compared to show_host_bus or show_interface + * Returns: number of bytes written, or 0 on failure + */ +static ssize_t +edd_info_show(struct device *dev, char *buf, size_t count, loff_t off) +{ + struct edd_info *edd=dev_get_drvdata(dev); + int i, warn_padding=0, nonzero_path=0, warn_key=0, warn_checksum=0; + uint8_t checksum=0, c=0; + char *p = buf; + if (!dev || !edd || !buf || off) { + return 0; + } + + p += edd_dump_raw_data(p, edd, 4); + p += edd_dump_raw_data(p, ((char *)edd)+4, sizeof(*edd)-4); + + p += sprintf(p, "version: "); + switch (edd->version) { + case 0x0: + p += sprintf(p, "unsupported\n"); + case 0x21: + p += sprintf(p, "1.1\n"); + break; + case 0x30: + p += sprintf(p, "3.0\n"); + break; + default: + p += sprintf(p, "(unknown version %xh)\n", + edd->version); + break; + } + + p += sprintf(p, "Extensions:\n"); + if (edd->interface_support & EDD_EXT_FIXED_DISK_ACCESS) { + p += sprintf(p, "\tFixed disk access\n"); + } + if (edd->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) { + p += sprintf(p, "\tDevice locking and ejecting\n"); + } + if (edd->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) { + p += sprintf(p, "\tEnhanced Disk Drive support\n"); + } + if (edd->interface_support & EDD_EXT_64BIT_EXTENSIONS) { + p += sprintf(p, "\t64-bit extensions\n"); + } + + p += sprintf(p, "Info Flags:\n"); + if (edd->params.info_flags & EDD_INFO_DMA_BOUNDRY_ERROR_TRANSPARENT) + p += sprintf(p, "\tdma_boundry_error_transparent\n"); + if (edd->params.info_flags & EDD_INFO_GEOMETRY_VALID) + p += sprintf(p, "\tgeometry_valid\n"); + if (edd->params.info_flags & EDD_INFO_REMOVABLE) + p += sprintf(p, "\tremovable\n"); + if (edd->params.info_flags & EDD_INFO_WRITE_VERIFY) + p += sprintf(p, "\twrite_verify\n"); + if (edd->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION) + p += sprintf(p, "\tmedia_change_notification\n"); + if (edd->params.info_flags & EDD_INFO_LOCKABLE) + p += sprintf(p, "\tlockable\n"); + if (edd->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT) + p += sprintf(p, "\tno_media_present\n"); + if (edd->params.info_flags & EDD_INFO_USE_INT13_FN50) + p += sprintf(p, "\tuse_int13_fn50\n"); + + p += sprintf(p, "num_default_cylinders: %x\n", + edd->params.num_default_cylinders); + p += sprintf(p, "num_default_heads: %x\n", edd->params.num_default_heads); + p += sprintf(p, "sectors_per_track: %x\n", edd->params.sectors_per_track); + p += sprintf(p, "number_of_sectors: %llx\n", + edd->params.number_of_sectors); + + /* Spec violation here. Adaptec AIC7899 returns 0xDDBE + here, when it should be (per spec) 0xBEDD. + */ + if (edd->params.key == 0xDDBE) { + warn_key=1; + } + + if (! (edd->params.key == 0xBEDD || edd->params.key == 0xDDBE)) { + return (p - buf); + } + + for (i=30; i<=73; i++) { + c = *(((uint8_t *)edd)+i+4); + if (c) nonzero_path++; + checksum += c; + } + if (checksum) { + warn_checksum=1; + if (!nonzero_path) { + p += sprintf(p, "Warning: Spec violation. Device Path checksum invalid (0x%02x should be 0x00).\n", checksum); + + return (p - buf); + } + } + + p += __edd_unparse_host_bus (dev, p, count - (p - buf), off); + p += __edd_unparse_interface(dev, p, count - (p - buf), off); + + p += sprintf(p, "\n"); + if (warn_key) { + p += sprintf(p, "Warning: Spec violation. Key should be 0xBEDD, is 0xDDBE\n"); + } + if (warn_padding) { + p += sprintf(p, "Warning: Spec violation. Padding should be 0x20, is 0x00\n"); + } + if (warn_checksum) { + p += sprintf(p, "Warning: Spec violation. Device Path checksum invalid (0x%02x should be 0x00).\n", checksum); + } + + return (p - buf); +} + +static EDD_DEVICE_ATTR(info,0444,edd_info_show); +static EDD_DEVICE_ATTR(interface,0444,edd_show_interface); +static EDD_DEVICE_ATTR(host_bus,0444,edd_show_host_bus); + +static struct device_attribute * def_attrs[] = { + &edd_attr_info, + &edd_attr_interface, + &edd_attr_host_bus, + NULL, +}; + +static int +edd_create_file(struct device *dev, struct device_attribute * attr) +{ + return device_create_file(dev, attr); +} + +static int edd_populate_dir(struct device * dev) +{ + struct device_attribute * attr; + int i; + int error = 0; + + for (i = 0; (attr = def_attrs[i]); i++) { + if ((error = edd_create_file(dev,attr))) { + break; + } + } + return error; +} + +static int edd_device_register(struct device *dev, int i) +{ + int error; + + if (!dev) return 1; + memset(dev, 0, sizeof(*dev)); + dev_set_drvdata(dev, &edd[i]); + dev->driver = &edd_driver; + dev->bus = dev->driver->bus; + dev->parent = &bios_device; + dev->dir.ops = &edd_attr_ops; + snprintf(dev->name, DEVICE_NAME_SIZE, "BIOS int 13h device %02xh", edd[i].device); + snprintf(dev->bus_id, BUS_ID_SIZE, "int13_dev%02x", edd[i].device); + dev->dir.name = dev->name; + + error = device_register(dev); + if (error) return error; + + error = edd_populate_dir(dev); + return error; +} + +/** + * edd_init() - creates driverfs edd/{device num}/ tree + * + * This assumes that eddnr and edd were + * assigned in setup.c already. + */ +static int __init +edd_init(void) +{ + unsigned int i; + int rc; + + printk(KERN_INFO "BIOS EDD facility v%s, %d devices found\n", + EDD_VERSION, eddnr); + + if (!eddnr) { + printk(KERN_INFO "EDD information not available.\n"); + return 1; + } + + rc = device_register(&bios_device); + if (rc) return rc; + + rc = driver_register(&edd_driver); + if (rc) { + put_device(&bios_device); + return rc; + } + + for (i=0; i #include #include +#include extern void dump_thread(struct pt_regs *, struct user *); extern spinlock_t rtc_lock; @@ -177,3 +178,8 @@ EXPORT_SYMBOL(is_sony_vaio_laptop); EXPORT_SYMBOL(__PAGE_KERNEL); + +#ifdef CONFIG_EDD_MODULE +EXPORT_SYMBOL(edd); +EXPORT_SYMBOL(eddnr); +#endif diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/arch/i386/kernel/setup.c linux-2.5-edd/arch/i386/kernel/setup.c --- linux-2.5/arch/i386/kernel/setup.c Fri Sep 20 13:11:58 2002 +++ linux-2.5-edd/arch/i386/kernel/setup.c Fri Sep 27 15:53:06 2002 @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include "setup_arch_pre.h" @@ -466,6 +467,24 @@ return 0; } +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) +unsigned char eddnr; +struct edd_info edd[EDDNR]; +/** + * copy_edd() - Copy the BIOS EDD information into a safe place. + * + */ +static inline void copy_edd(void) +{ + eddnr = EDD_NR; + memcpy(edd, EDD_BUF, sizeof(edd)); +} +#else +static inline void copy_edd(void) +{ +} +#endif + /* * Do NOT EVER look at the BIOS memory size location. * It does not work on many machines. @@ -843,6 +862,7 @@ #endif ARCH_SETUP setup_memory_region(); + copy_edd(); if (!MOUNT_ROOT_RDONLY) root_mountflags &= ~MS_RDONLY; diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/include/asm-i386/edd.h linux-2.5-edd/include/asm-i386/edd.h --- linux-2.5/include/asm-i386/edd.h Wed Dec 31 18:00:00 1969 +++ linux-2.5-edd/include/asm-i386/edd.h Fri Sep 27 15:53:27 2002 @@ -0,0 +1,162 @@ +/* + * linux/include/asm-i386/edd.h + * by Matt Domsch + * Copyright 2002 Dell Computer Corporation + * + * structures and definitions for the int 13, ax={41,48}h + * BIOS Enhanced Disk Device Services + * This is based on the T13 group document D1572 Revision 0 (August 14 2002) + * available at http://www.t13.org/docs2002/d1572r0.pdf. It is + * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf + * + * In a nutshell, arch/i386/boot/setup.S populates a scratch table + * in the empty_zero_block that contains a list of BIOS-enumerated + * boot devices. + * In arch/i386/kernel/setup.c, this information is + * transferred into the edd structure, and in arch/i386/kernel/edd.c, that + * information is used to identify BIOS boot disk. The code in setup.S + * is very sensitive to the size of these structures. + * + */ +#ifndef _ASM_I386_EDD_H +#define _ASM_I386_EDD_H + +#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF + in empty_zero_block - treat this as 1 byte */ +#define EDDBUF 0x600 /* addr of edd_info structs in empty_zero_block */ +#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */ +#define EDDEXTSIZE 4 /* change these if you muck with the structures */ +#define EDDPARMSIZE 74 + +#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0) +#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1) +#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2) +#define EDD_EXT_64BIT_EXTENSIONS (1 << 3) + +#define EDD_INFO_DMA_BOUNDRY_ERROR_TRANSPARENT (1 << 0) +#define EDD_INFO_GEOMETRY_VALID (1 << 1) +#define EDD_INFO_REMOVABLE (1 << 2) +#define EDD_INFO_WRITE_VERIFY (1 << 3) +#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4) +#define EDD_INFO_LOCKABLE (1 << 5) +#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6) +#define EDD_INFO_USE_INT13_FN50 (1 << 7) + + + +#ifndef __ASSEMBLY__ + +struct edd_device_params { + u16 length; + u16 info_flags; + u32 num_default_cylinders; + u32 num_default_heads; + u32 sectors_per_track; + u64 number_of_sectors; + u16 bytes_per_sector; + u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */ + u16 key; /* = 0xBEDD */ + u8 device_path_info_length; /* = 44 */ + u8 reserved2; + u16 reserved3; + u8 host_bus_type[4]; + u8 interface_type[8]; + union { + struct { + u16 base_address; + u16 reserved1; + u32 reserved2; + } __attribute__((packed)) isa; + struct { + u8 bus; + u8 slot; + u8 function; + u8 channel; + u32 reserved; + } __attribute__((packed)) pci; + /* pcix is same as pci */ + struct { + u64 reserved; + } __attribute__((packed)) ibnd; + struct { + u64 reserved; + } __attribute__((packed)) xprs; + struct { + u64 reserved; + } __attribute__((packed)) htpt; + struct { + u64 reserved; + } __attribute__((packed)) unknown; + } interface_path; + union { + struct { + u8 device; + u8 reserved1; + u16 reserved2; + u32 reserved3; + u64 reserved4; + } __attribute__((packed)) ata; + struct { + u8 device; + u8 lun; + u8 reserved1; + u8 reserved2; + u32 reserved3; + u64 reserved4; + } __attribute__((packed)) atapi; + struct { + u16 id; + u64 lun; + u16 reserved1; + u32 reserved2; + } __attribute__((packed)) scsi; + struct { + u64 serial_number; + u64 reserved; + } __attribute__((packed)) usb; + struct { + u64 eui; + u64 reserved; + } __attribute__((packed)) i1394; + struct { + u64 wwid; + u64 lun; + } __attribute__((packed)) fibre; + struct { + u64 identity_tag; + u64 reserved; + } __attribute__((packed)) i2o; + struct { + u32 array_number; + u32 reserved1; + u64 reserved2; + } __attribute((packed)) raid; + struct { + u8 device; + u8 reserved1; + u16 reserved2; + u32 reserved3; + u64 reserved4; + } __attribute__((packed)) sata; + struct { + u64 reserved1; + u64 reserved2; + } __attribute__((packed)) unknown; + } device_path; + u8 reserved4; + u8 checksum; +} __attribute__((packed)); + +struct edd_info { + u8 device; + u8 version; + u16 interface_support; + struct edd_device_params params; +} __attribute__((packed)); + +extern struct edd_info edd[EDDNR]; +extern unsigned char eddnr; +#endif/*!__ASSEMBLY__*/ + +#endif /* _ASM_I386_EDD_H */ + diff -Nur --exclude=SCCS --exclude=BitKeeper --exclude=ChangeSet linux-2.5/include/asm-i386/setup.h linux-2.5-edd/include/asm-i386/setup.h --- linux-2.5/include/asm-i386/setup.h Tue Sep 10 11:42:10 2002 +++ linux-2.5-edd/include/asm-i386/setup.h Fri Sep 27 15:53:27 2002 @@ -37,6 +37,8 @@ #define KERNEL_START (*(unsigned long *) (PARAM+0x214)) #define INITRD_START (*(unsigned long *) (PARAM+0x218)) #define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) +#define EDD_NR (*(unsigned char *) (PARAM+EDDNR)) +#define EDD_BUF ((struct edd_info *) (PARAM+EDDBUF)) #define COMMAND_LINE ((char *) (PARAM+2048)) #define COMMAND_LINE_SIZE 256 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/