Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758663Ab3ENWKU (ORCPT ); Tue, 14 May 2013 18:10:20 -0400 Received: from mail-ee0-f50.google.com ([74.125.83.50]:41201 "EHLO mail-ee0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758604Ab3ENWKS (ORCPT ); Tue, 14 May 2013 18:10:18 -0400 From: Tomasz Figa To: linux-arm-kernel@lists.infradead.org Cc: Mike Turquette , Saravana Kannan , Paul Walmsley , Shawn Guo , Sascha Hauer , Rob Herring , Mark Brown , Russell King , Ulf Hansson , Andrew Lunn , Stephen Boyd , Linus Walleij , linux-arm-msm@vger.kernel.org, Magnus Damm , linux-kernel@vger.kernel.org, Amit Kucheria , Richard Zhao , Grant Likely , Deepak Saxena , Thomas Gleixner , Jamie Iles , Arnd Bergman , Jeremy Kerr Subject: Re: [PATCH] clk: Fix race condition between clk_set_parent and clk_enable() Date: Wed, 15 May 2013 00:10:06 +0200 Message-ID: <9066674.E2RzuEn3ap@flatron> User-Agent: KMail/4.10.3 (Linux/3.9.2-gentoo; KDE/4.10.3; x86_64; ; ) In-Reply-To: <20130514185417.10068.5717@quantum> References: <1367383328-25700-1-git-send-email-skannan@codeaurora.org> <20130514185417.10068.5717@quantum> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8339 Lines: 231 Hi, On Tuesday 14 of May 2013 11:54:17 Mike Turquette wrote: > Quoting Saravana Kannan (2013-04-30 21:42:08) > > > Without this patch, the following race conditions are possible. > > > > Race condition 1: > > * clk-A has two parents - clk-X and clk-Y. > > * All three are disabled and clk-X is current parent. > > * Thread A: clk_set_parent(clk-A, clk-Y). > > * Thread A: > > * Thread A: Grabs enable lock. > > * Thread A: Sees enable count of clk-A is 0, so doesn't enable clk-Y. > > * Thread A: Updates clk-A SW parent to clk-Y > > * Thread A: Releases enable lock. > > * Thread B: clk_enable(clk-A). > > * Thread B: clk_enable() enables clk-Y, then enabled clk-A and > > returns. > > > > clk-A is now enabled in software, but not clocking in hardware since > > the hardware parent is still clk-X. > > > > The only way to avoid race conditions between clk_set_parent() and > > clk_enable/disable() is to ensure that clk_enable/disable() calls > > don't > > require changes to hardware enable state between changes to software > > clock topology and hardware clock topology. > > > > There are options to achieve the above: > > 1. Grab the enable lock before changing software/hardware topology and > > > > release it afterwards. > > > > 2. Keep the clock enabled for the duration of software/hardware > > topology> > > change so that any additional enable/disable calls don't try to > > change > > the hardware state. Once the topology change is complete, the clock > > can > > be put back in its original enable state. > > > > Option (1) is not an acceptable solution since the set_parent() ops > > might need to sleep. > > > > Therefore, this patch implements option (2). > > > > This patch doesn't violate any API semantics. clk_disable() doesn't > > guarantee that the clock is actually disabled. So, no clients of a > > clock can assume that a clock is disabled after their last call to > > clk_disable(). So, enabling the clock during a parent change is not a > > violation of any API semantics. > > > > This also has the nice side effect of simplifying the error handling > > code. > > > > Signed-off-by: Saravana Kannan > > I've taken this patch into clk-next for testing. The code itself looks > fine. The only thing that remains to be seen is if any platforms have a > problem with disabled clocks getting turned on during a reparent > operation. IMHO this behavior should be documented somewhere, with a note that the clock must not be prepared to keep it disabled during reparent operation and possibly also pointing to the CLK_SET_PARENT_GATE flag. > On platforms that I have worked on this is OK, but I suppose there could > be some platform out there where a clock is prepared and disabled, and > briefly enabling the clock during the reparent operation somehow puts > the hardware in a bad state. Well, on any platform where default clock settings are not completely correct this is likely to cause problems, because some device might get too high frequency for some period of time, which might crash it alone as well as the whole system. Best regards, Tomasz > Anyways that's a long shot and this look OK until somebody screams. > > Regards, > Mike > > > --- > > It's been a while since I submitted a patch. So, apologies if I'm > > cc'ing people who no longer care about the state of the common clock > > framework.> > > drivers/clk/clk.c | 72 > > +++++++++++++++++++++++----------------------------- 1 files > > changed, 32 insertions(+), 40 deletions(-) > > > > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c > > index 934cfd1..fe4055f 100644 > > --- a/drivers/clk/clk.c > > +++ b/drivers/clk/clk.c > > @@ -1377,67 +1377,59 @@ static int __clk_set_parent(struct clk *clk, > > struct clk *parent, u8 p_index)> > > unsigned long flags; > > int ret = 0; > > struct clk *old_parent = clk->parent; > > > > - bool migrated_enable = false; > > > > - /* migrate prepare */ > > - if (clk->prepare_count) > > + /* > > + * Migrate prepare state between parents and prevent race with > > + * clk_enable(). > > + * > > + * If the clock is not prepared, then a race with > > + * clk_enable/disable() is impossible since we already have > > the > > + * prepare lock (future calls to clk_enable() need to be > > preceded by + * a clk_prepare()). > > + * > > + * If the clock is prepared, migrate the prepared state to the > > new + * parent and also protect against a race with > > clk_enable() by + * forcing the clock and the new parent on. > > This ensures that all + * future calls to clk_enable() are > > practically NOPs with respect to + * hardware and software > > states. > > + */ > > + if (clk->prepare_count) { > > > > __clk_prepare(parent); > > > > - > > - flags = clk_enable_lock(); > > - > > - /* migrate enable */ > > - if (clk->enable_count) { > > - __clk_enable(parent); > > - migrated_enable = true; > > + clk_enable(parent); > > + clk_enable(clk); > > > > } > > > > /* update the clk tree topology */ > > > > + flags = clk_enable_lock(); > > > > clk_reparent(clk, parent); > > > > - > > > > clk_enable_unlock(flags); > > > > /* change clock input source */ > > if (parent && clk->ops->set_parent) > > > > ret = clk->ops->set_parent(clk->hw, p_index); > > > > - > > > > if (ret) { > > > > - /* > > - * The error handling is tricky due to that we need to > > release - * the spinlock while issuing the .set_parent > > callback. This - * means the new parent might have > > been enabled/disabled in - * between, which must be > > considered when doing rollback. - */ > > - flags = clk_enable_lock(); > > > > + flags = clk_enable_lock(); > > > > clk_reparent(clk, old_parent); > > > > - > > - if (migrated_enable && clk->enable_count) { > > - __clk_disable(parent); > > - } else if (migrated_enable && (clk->enable_count == > > 0)) { - __clk_disable(old_parent); > > - } else if (!migrated_enable && clk->enable_count) { > > - __clk_disable(parent); > > - __clk_enable(old_parent); > > - } > > - > > > > clk_enable_unlock(flags); > > > > - if (clk->prepare_count) > > + if (clk->prepare_count) { > > + clk_disable(clk); > > + clk_disable(parent); > > > > __clk_unprepare(parent); > > > > - > > + } > > > > return ret; > > > > } > > > > - /* clean up enable for old parent if migration was done */ > > - if (migrated_enable) { > > - flags = clk_enable_lock(); > > - __clk_disable(old_parent); > > - clk_enable_unlock(flags); > > - } > > - > > - /* clean up prepare for old parent if migration was done */ > > - if (clk->prepare_count) > > + /* > > + * Finish the migration of prepare state and undo the changes > > done + * for preventing a race with clk_enable(). > > + */ > > + if (clk->prepare_count) { > > + clk_disable(clk); > > + clk_disable(old_parent); > > > > __clk_unprepare(old_parent); > > > > + } > > > > /* update debugfs with new clk tree topology */ > > clk_debug_reparent(clk, parent); > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/