Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755277Ab3EPH0G (ORCPT ); Thu, 16 May 2013 03:26:06 -0400 Received: from mail-wi0-f179.google.com ([209.85.212.179]:36944 "EHLO mail-wi0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752738Ab3EPH0D (ORCPT ); Thu, 16 May 2013 03:26:03 -0400 Date: Thu, 16 May 2013 08:25:57 +0100 From: Lee Jones To: Vinod Koul Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, balbi@ti.com, linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org, davem@davemloft.net, herbert@gondor.hengli.com.au, arnd@arndb.de, linus.walleij@stericsson.com, srinidhi.kasagar@stericsson.com Subject: Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg() Message-ID: <20130516072557.GD3269@gmail.com> References: <1368611522-9984-1-git-send-email-lee.jones@linaro.org> <1368611522-9984-3-git-send-email-lee.jones@linaro.org> <20130516063546.GD14863@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20130516063546.GD14863@intel.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7379 Lines: 202 On Thu, 16 May 2013, Vinod Koul wrote: > On Wed, May 15, 2013 at 10:51:25AM +0100, Lee Jones wrote: > > All configuration left in d40_phy_cfg() is runtime configurable and > > there is already a call into it from d40_runtime_config(), so let's > > rely on that. > > > > Acked-by: Vinod Koul > That needs up update! Ah, where did I get that from that? Was that my mistake, or was this in the MAINTAINERS file? > > Acked-by: Arnd Bergmann > > Signed-off-by: Lee Jones > > --- > > drivers/dma/ste_dma40.c | 14 +++--- > > drivers/dma/ste_dma40_ll.c | 101 +++++++++++++++++++++----------------------- > > drivers/dma/ste_dma40_ll.h | 3 +- > > 3 files changed, 58 insertions(+), 60 deletions(-) > > > > diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c > > index 759293e..b7fe46b 100644 > > --- a/drivers/dma/ste_dma40.c > > +++ b/drivers/dma/ste_dma40.c > > @@ -2043,6 +2043,14 @@ static int d40_config_memcpy(struct d40_chan *d40c) > > } else if (dma_has_cap(DMA_MEMCPY, cap) && > > dma_has_cap(DMA_SLAVE, cap)) { > > d40c->dma_cfg = dma40_memcpy_conf_phy; > > + > > + /* Generate interrrupt at end of transfer or relink. */ > > + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); > > + > > + /* Generate interrupt on error. */ > > + d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); > > + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); > > + > > } else { > > chan_err(d40c, "No memcpy\n"); > > return -EINVAL; > > @@ -2496,9 +2504,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) > > } > > > > pm_runtime_get_sync(d40c->base->dev); > > - /* Fill in basic CFG register values */ > > - d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg, > > - &d40c->dst_def_cfg, chan_is_logical(d40c)); > > > > d40_set_prio_realtime(d40c); > > > > @@ -2862,8 +2867,7 @@ static int d40_set_runtime_config(struct dma_chan *chan, > > if (chan_is_logical(d40c)) > > d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); > > else > > - d40_phy_cfg(cfg, &d40c->src_def_cfg, > > - &d40c->dst_def_cfg, false); > > + d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); > > > > /* These settings will take precedence later */ > > d40c->runtime_addr = config_addr; > > diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c > > index 435a223..ab5a2a7 100644 > > --- a/drivers/dma/ste_dma40_ll.c > > +++ b/drivers/dma/ste_dma40_ll.c > > @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, > > > > } > > > > -/* Sets up SRC and DST CFG register for both logical and physical channels */ > > -void d40_phy_cfg(struct stedma40_chan_cfg *cfg, > > - u32 *src_cfg, u32 *dst_cfg, bool is_log) > > +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) > > { > > u32 src = 0; > > u32 dst = 0; > > > > - if (!is_log) { > > - /* Physical channel */ > > - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || > > - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { > > - /* Set master port to 1 */ > > - src |= 1 << D40_SREG_CFG_MST_POS; > > - src |= D40_TYPE_TO_EVENT(cfg->dev_type); > > - > > - if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) > > - src |= 1 << D40_SREG_CFG_PHY_TM_POS; > > - else > > - src |= 3 << D40_SREG_CFG_PHY_TM_POS; > > - } > > - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || > > - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { > > - /* Set master port to 1 */ > > - dst |= 1 << D40_SREG_CFG_MST_POS; > > - dst |= D40_TYPE_TO_EVENT(cfg->dev_type); > > - > > - if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) > > - dst |= 1 << D40_SREG_CFG_PHY_TM_POS; > > - else > > - dst |= 3 << D40_SREG_CFG_PHY_TM_POS; > > - } > > - /* Interrupt on end of transfer for destination */ > > - dst |= 1 << D40_SREG_CFG_TIM_POS; > > - > > - /* Generate interrupt on error */ > > - src |= 1 << D40_SREG_CFG_EIM_POS; > > - dst |= 1 << D40_SREG_CFG_EIM_POS; > > - > > - /* PSIZE */ > > - if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { > > - src |= 1 << D40_SREG_CFG_PHY_PEN_POS; > > - src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; > > - } > > - if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { > > - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; > > - dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; > > - } > > - > > - /* Element size */ > > - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; > > - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; > > - > > - /* Set the priority bit to high for the physical channel */ > > - if (cfg->high_priority) { > > - src |= 1 << D40_SREG_CFG_PRI_POS; > > - dst |= 1 << D40_SREG_CFG_PRI_POS; > > - } > > + if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || > > + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { > > + /* Set master port to 1 */ > > + src |= 1 << D40_SREG_CFG_MST_POS; > > + src |= D40_TYPE_TO_EVENT(cfg->dev_type); > > + > > + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) > > + src |= 1 << D40_SREG_CFG_PHY_TM_POS; > > + else > > + src |= 3 << D40_SREG_CFG_PHY_TM_POS; > > + } > > + if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || > > + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { > > + /* Set master port to 1 */ > > + dst |= 1 << D40_SREG_CFG_MST_POS; > > + dst |= D40_TYPE_TO_EVENT(cfg->dev_type); > > + > > + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) > > + dst |= 1 << D40_SREG_CFG_PHY_TM_POS; > > + else > > + dst |= 3 << D40_SREG_CFG_PHY_TM_POS; > > + } > > + /* Interrupt on end of transfer for destination */ > > + dst |= 1 << D40_SREG_CFG_TIM_POS; > > + > > + /* Generate interrupt on error */ > > + src |= 1 << D40_SREG_CFG_EIM_POS; > > + dst |= 1 << D40_SREG_CFG_EIM_POS; > > + > > + /* PSIZE */ > > + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { > > + src |= 1 << D40_SREG_CFG_PHY_PEN_POS; > > + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; > > + } > > + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { > > + dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; > > + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; > > + } > > + > > + /* Element size */ > > + src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; > > + dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; > > + > > + /* Set the priority bit to high for the physical channel */ > > + if (cfg->high_priority) { > > + src |= 1 << D40_SREG_CFG_PRI_POS; > > + dst |= 1 << D40_SREG_CFG_PRI_POS; > > } > > > > if (cfg->src_info.big_endian) > > diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h > > index fdde8ef..1b47312 100644 > > --- a/drivers/dma/ste_dma40_ll.h > > +++ b/drivers/dma/ste_dma40_ll.h > > @@ -432,8 +432,7 @@ enum d40_lli_flags { > > > > void d40_phy_cfg(struct stedma40_chan_cfg *cfg, > > u32 *src_cfg, > > - u32 *dst_cfg, > > - bool is_log); > > + u32 *dst_cfg); > > > > void d40_log_cfg(struct stedma40_chan_cfg *cfg, > > u32 *lcsp1, -- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/