Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757324Ab3ETPVB (ORCPT ); Mon, 20 May 2013 11:21:01 -0400 Received: from e34.co.us.ibm.com ([32.97.110.152]:53341 "EHLO e34.co.us.ibm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756799Ab3ETPU6 (ORCPT ); Mon, 20 May 2013 11:20:58 -0400 From: zwu.kernel@gmail.com To: linux-btrfs@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Zhi Yong Wu Subject: [RFC PATCH v1 3/5] BTRFS hot reloc: add one hot reloc thread Date: Mon, 20 May 2013 23:11:25 +0800 Message-Id: <1369062687-23544-4-git-send-email-zwu.kernel@gmail.com> X-Mailer: git-send-email 1.7.11.7 In-Reply-To: <1369062687-23544-1-git-send-email-zwu.kernel@gmail.com> References: <1369062687-23544-1-git-send-email-zwu.kernel@gmail.com> X-TM-AS-MML: No X-Content-Scanned: Fidelis XPS MAILER x-cbid: 13052015-2876-0000-0000-000008DC5456 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23205 Lines: 826 From: Zhi Yong Wu Add one private thread for hot relocation. It will check if there're some extents which is hotter than the threshold and queue them at first, if no, it will return and wait for its next turn; otherwise, it will check if nonrotating disk ratio is beyond its usage threshold, if no, it will directly relocate hot extents from rotating disk to nonrotating disk; otherwise it will find the extents with low temperature and queue them, then relocate those extents with low temperature and queue them, and finally relocate the hot extents from from rotating disk to nonrotating disk. Signed-off-by: Zhi Yong Wu --- fs/btrfs/Makefile | 3 +- fs/btrfs/ctree.h | 2 + fs/btrfs/hot_relocate.c | 713 ++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/hot_relocate.h | 43 +++ 4 files changed, 760 insertions(+), 1 deletion(-) create mode 100644 fs/btrfs/hot_relocate.c create mode 100644 fs/btrfs/hot_relocate.h diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile index 3932224..94f1ea5 100644 --- a/fs/btrfs/Makefile +++ b/fs/btrfs/Makefile @@ -8,7 +8,8 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \ extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \ export.o tree-log.o free-space-cache.o zlib.o lzo.o \ compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o \ - reada.o backref.o ulist.o qgroup.o send.o dev-replace.o raid56.o + reada.o backref.o ulist.o qgroup.o send.o dev-replace.o raid56.o \ + hot_relocate.o btrfs-$(CONFIG_BTRFS_FS_POSIX_ACL) += acl.o btrfs-$(CONFIG_BTRFS_FS_CHECK_INTEGRITY) += check-integrity.o diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index f7a3170..6c547ca 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1636,6 +1636,8 @@ struct btrfs_fs_info { struct btrfs_dev_replace dev_replace; atomic_t mutually_exclusive_operation_running; + + void *hot_reloc; }; /* diff --git a/fs/btrfs/hot_relocate.c b/fs/btrfs/hot_relocate.c new file mode 100644 index 0000000..ae28b86 --- /dev/null +++ b/fs/btrfs/hot_relocate.c @@ -0,0 +1,713 @@ +/* + * fs/btrfs/hot_relocate.c + * + * Copyright (C) 2013 IBM Corp. All rights reserved. + * Written by Zhi Yong Wu + * Ben Chociej + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "hot_relocate.h" + +/* + * Hot relocation strategy: + * + * The relocation code below operates on the heat map lists to identify + * hot or cold data logical file ranges that are candidates for relocation. + * The triggering mechanism for relocation is controlled by a global heat + * threshold integer value (HOT_RELOC_THRESHOLD). Ranges are + * queued for relocation by the periodically executing relocate kthread, + * which updates the global heat threshold and responds to space pressure + * on the nonrotating disks. + * + * The heat map lists index logical ranges by heat and provide a constant-time + * access path to hot or cold range items. The relocation kthread uses this + * path to find hot or cold items to move to/from nonrotating disks. To ensure + * that the relocation kthread has a chance to sleep, and to prevent thrashing + * between nonrotating disks and HDD, there is a configurable limit to how many + * ranges are moved per iteration of the kthread. This limit may be overrun in + * the case where space pressure requires that items be aggressively moved from + * nonrotating disks back to HDD. + * + * This needs still more resistance to thrashing and stronger (read: actual) + * guarantees that relocation operations won't -ENOSPC. + * + * The relocation code has introduced one new btrfs block group type: + * BTRFS_BLOCK_GROUP_DATA_NONROT. + * + * When mkfs'ing a volume with the hot data relocation option, initial block + * groups are allocated to the proper disks. Runtime block group allocation + * only allocates BTRFS_BLOCK_GROUP_DATA BTRFS_BLOCK_GROUP_METADATA and + * BTRFS_BLOCK_GROUP_SYSTEM to HDD, and likewise only allocates + * BTRFS_BLOCK_GROUP_DATA_NONROT to nonrotating disks. + * (assuming, critically, the HOT_MOVE option is set at mount time). + */ + +/* + * Returns the ratio of nonrotating disks that are full. + * If no nonrotating disk is found, returns THRESH_MAX_VALUE + 1. + */ +static int hot_calc_nonrot_ratio(struct hot_reloc *hot_reloc) +{ + struct btrfs_space_info *info; + struct btrfs_device *device, *next; + struct btrfs_fs_info *fs_info = hot_reloc->fs_info; + u64 total_bytes = 0, bytes_used = 0; + + /* + * Iterate through devices, if they're nonrot, + * add their bytes to the total_bytes. + */ + mutex_lock(&fs_info->fs_devices->device_list_mutex); + list_for_each_entry_safe(device, next, + &fs_info->fs_devices->devices, dev_list) { + if (blk_queue_nonrot(bdev_get_queue(device->bdev))) + total_bytes += device->total_bytes; + } + mutex_unlock(&fs_info->fs_devices->device_list_mutex); + + if (total_bytes == 0) + return THRESH_MAX_VALUE + 1; + + /* + * Iterate through space_info. if nonrot data block group + * is found, add the bytes used by that group bytes_used + */ + rcu_read_lock(); + list_for_each_entry_rcu(info, &fs_info->space_info, list) { + if (info->flags & BTRFS_BLOCK_GROUP_DATA_NONROT) + bytes_used += info->bytes_used; + } + rcu_read_unlock(); + + /* Finish up, return ratio of nonrotating disks filled. */ + BUG_ON(bytes_used >= total_bytes); + + return (int) div64_u64(bytes_used * 100, total_bytes); +} + +/* + * Update heat threshold for hot relocation + * based on how full nonrotating disks are. + */ +static int hot_update_threshold(struct hot_reloc *hot_reloc, + int update) +{ + int thresh = hot_reloc->thresh; + int ratio = hot_calc_nonrot_ratio(hot_reloc); + + /* Sometimes update global threshold, others not */ + if (!update && ratio < HIGH_WATER_LEVEL) + return ratio; + + if (unlikely(ratio > THRESH_MAX_VALUE)) + thresh = HEAT_MAX_VALUE + 1; + else { + WARN_ON(HIGH_WATER_LEVEL > THRESH_MAX_VALUE + || LOW_WATER_LEVEL < 0); + + if (ratio >= HIGH_WATER_LEVEL) + thresh += THRESH_UP_SPEED; + else if (ratio <= LOW_WATER_LEVEL) + thresh -= THRESH_DOWN_SPEED; + + if (thresh > HEAT_MAX_VALUE) + thresh = HEAT_MAX_VALUE + 1; + else if (thresh < 0) + thresh = 0; + } + + hot_reloc->thresh = thresh; + return ratio; +} + +static bool hot_can_relocate(struct inode *inode, u64 start, + u64 len, u64 *skip, u64 *end) +{ + struct extent_map *em = NULL; + struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; + struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; + bool ret = true; + + /* + * Make sure that once we start relocating an extent, + * we keep on relocating it + */ + if (start < *end) + return true; + + *skip = 0; + + /* + * Hopefully we have this extent in the tree already, + * try without the full extent lock + */ + read_lock(&em_tree->lock); + em = lookup_extent_mapping(em_tree, start, len); + read_unlock(&em_tree->lock); + if (!em) { + /* Get the big lock and read metadata off disk */ + lock_extent(io_tree, start, start + len - 1); + em = btrfs_get_extent(inode, NULL, 0, start, len, 0); + unlock_extent(io_tree, start, start + len - 1); + if (IS_ERR(em)) + return false; + } + + /* This will cover holes, and inline extents */ + if (em->block_start >= EXTENT_MAP_LAST_BYTE) + ret = false; + + if (ret) { + *end = extent_map_end(em); + } else { + *skip = extent_map_end(em); + *end = 0; + } + + free_extent_map(em); + return ret; +} + +static void hot_cleanup_relocq(struct list_head *bucket) +{ + struct hot_range_item *hr; + struct hot_comm_item *ci, *ci_next; + + list_for_each_entry_safe(ci, ci_next, bucket, reloc_list) { + hr = container_of(ci, struct hot_range_item, hot_range); + list_del_init(&hr->hot_range.reloc_list); + hot_comm_item_put(ci); + } +} + +static int hot_queue_extent(struct hot_reloc *hot_reloc, + struct list_head *bucket, + u64 *counter, int storage_type) +{ + struct hot_comm_item *ci; + struct hot_range_item *hr; + int st, ret = 0; + + /* Queue hot_ranges */ + list_for_each_entry_rcu(ci, bucket, track_list) { + if (test_bit(HOT_DELETING, &ci->delete_flag)) + continue; + + /* Queue up on relocate list */ + hr = container_of(ci, struct hot_range_item, hot_range); + st = hr->storage_type; + if (st != storage_type) { + list_del_init(&ci->reloc_list); + list_add_tail(&ci->reloc_list, + &hot_reloc->hot_relocq[storage_type]); + hot_comm_item_get(ci); + *counter = *counter + 1; + } + + if (*counter >= HOT_RELOC_MAX_ITEMS) + break; + + if (kthread_should_stop()) { + ret = 1; + break; + } + } + + return ret; +} + +static u64 hot_search_extent(struct hot_reloc *hot_reloc, + int thresh, int storage_type) +{ + struct hot_info *root; + u64 counter = 0; + int i, ret = 0; + + root = hot_reloc->fs_info->sb->s_hot_root; + for (i = HEAT_MAX_VALUE; i >= thresh; i--) { + rcu_read_lock(); + if (!list_empty(&root->hot_map[TYPE_RANGE][i])) + ret = hot_queue_extent(hot_reloc, + &root->hot_map[TYPE_RANGE][i], + &counter, storage_type); + rcu_read_unlock(); + if (ret) { + counter = 0; + break; + } + } + + if (ret) + hot_cleanup_relocq(&hot_reloc->hot_relocq[storage_type]); + + return counter; +} + +static int hot_load_file_extent(struct inode *inode, + struct page **pages, + unsigned long start_index, + int num_pages, int storage_type) +{ + unsigned long file_end; + int ret, i, i_done; + u64 isize = i_size_read(inode), page_start, page_end, page_cnt; + struct btrfs_ordered_extent *ordered; + struct extent_state *cached_state = NULL; + struct extent_io_tree *tree = &BTRFS_I(inode)->io_tree; + gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping); + + file_end = (isize - 1) >> PAGE_CACHE_SHIFT; + if (!isize || start_index > file_end) + return 0; + + page_cnt = min_t(u64, (u64)num_pages, (u64)file_end - start_index + 1); + + ret = btrfs_delalloc_reserve_space(inode, + page_cnt << PAGE_CACHE_SHIFT, &storage_type); + if (ret) + return ret; + + i_done = 0; + /* step one, lock all the pages */ + for (i = 0; i < page_cnt; i++) { + struct page *page; +again: + page = find_or_create_page(inode->i_mapping, + start_index + i, mask); + if (!page) + break; + + page_start = page_offset(page); + page_end = page_start + PAGE_CACHE_SIZE - 1; + while (1) { + lock_extent(tree, page_start, page_end); + ordered = btrfs_lookup_ordered_extent(inode, + page_start); + unlock_extent(tree, page_start, page_end); + if (!ordered) + break; + + unlock_page(page); + btrfs_start_ordered_extent(inode, ordered, 1); + btrfs_put_ordered_extent(ordered); + lock_page(page); + /* + * we unlocked the page above, so we need check if + * it was released or not. + */ + if (page->mapping != inode->i_mapping) { + unlock_page(page); + page_cache_release(page); + goto again; + } + } + + if (!PageUptodate(page)) { + btrfs_readpage(NULL, page); + lock_page(page); + if (!PageUptodate(page)) { + unlock_page(page); + page_cache_release(page); + ret = -EIO; + break; + } + } + + if (page->mapping != inode->i_mapping) { + unlock_page(page); + page_cache_release(page); + goto again; + } + + pages[i] = page; + i_done++; + } + if (!i_done || ret) + goto out; + + if (!(inode->i_sb->s_flags & MS_ACTIVE)) + goto out; + + page_start = page_offset(pages[0]); + page_end = page_offset(pages[i_done - 1]) + PAGE_CACHE_SIZE - 1; + + lock_extent_bits(tree, page_start, page_end, 0, &cached_state); + + if (i_done != page_cnt) { + spin_lock(&BTRFS_I(inode)->lock); + BTRFS_I(inode)->outstanding_extents++; + spin_unlock(&BTRFS_I(inode)->lock); + + btrfs_delalloc_release_space(inode, + (page_cnt - i_done) << PAGE_CACHE_SHIFT, + storage_type); + } + + set_extent_hot(inode, page_start, page_end, + &cached_state, storage_type, 1); + unlock_extent_cached(tree, page_start, page_end, + &cached_state, GFP_NOFS); + + for (i = 0; i < i_done; i++) { + clear_page_dirty_for_io(pages[i]); + ClearPageChecked(pages[i]); + set_page_extent_mapped(pages[i]); + set_page_dirty(pages[i]); + unlock_page(pages[i]); + page_cache_release(pages[i]); + } + + /* + * so now we have a nice long stream of locked + * and up to date pages, lets wait on them + */ + for (i = 0; i < i_done; i++) + wait_on_page_writeback(pages[i]); + + return i_done; +out: + for (i = 0; i < i_done; i++) { + unlock_page(pages[i]); + page_cache_release(pages[i]); + } + + btrfs_delalloc_release_space(inode, + page_cnt << PAGE_CACHE_SHIFT, + storage_type); + + return ret; +} + +/* + * Relocate data to SSD or spinning drive based on past location + * and load the file into page cache and marks pages as dirty. + * + * based on defrag ioctl + */ +static int hot_relocate_extent(struct hot_range_item *hr, + struct hot_reloc *hot_reloc, + int storage_type) +{ + struct btrfs_root *root = hot_reloc->fs_info->fs_root; + struct inode *inode; + struct file_ra_state *ra = NULL; + struct btrfs_key key; + u64 isize, last_len = 0, skip = 0, end = 0; + unsigned long i, last, ra_index = 0; + int ret = -ENOENT, count = 0, new = 0; + int max_cluster = (256 * 1024) >> PAGE_CACHE_SHIFT; + int cluster = max_cluster; + struct page **pages = NULL; + + key.objectid = hr->hot_inode->i_ino; + key.type = BTRFS_INODE_ITEM_KEY; + key.offset = 0; + inode = btrfs_iget(root->fs_info->sb, &key, root, &new); + if (IS_ERR(inode)) + goto out; + else if (is_bad_inode(inode)) + goto out_inode; + + isize = i_size_read(inode); + if (isize == 0) { + ret = 0; + goto out_inode; + } + + ra = kzalloc(sizeof(*ra), GFP_NOFS); + if (!ra) { + ret = -ENOMEM; + goto out_inode; + } else { + file_ra_state_init(ra, inode->i_mapping); + } + + pages = kmalloc(sizeof(struct page *) * max_cluster, + GFP_NOFS); + if (!pages) { + ret = -ENOMEM; + goto out_ra; + } + + /* find the last page */ + if (hr->start + hr->len > hr->start) { + last = min_t(u64, isize - 1, + hr->start + hr->len - 1) >> PAGE_CACHE_SHIFT; + } else { + last = (isize - 1) >> PAGE_CACHE_SHIFT; + } + + i = hr->start >> PAGE_CACHE_SHIFT; + + /* + * make writeback starts from i, so the range can be + * written sequentially. + */ + if (i < inode->i_mapping->writeback_index) + inode->i_mapping->writeback_index = i; + + while (i <= last && count < last + 1 && + (i < (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> + PAGE_CACHE_SHIFT)) { + /* + * make sure we stop running if someone unmounts + * the FS + */ + if (!(inode->i_sb->s_flags & MS_ACTIVE)) + break; + + if (signal_pending(current)) { + printk(KERN_DEBUG "btrfs: hot relocation cancelled\n"); + break; + } + + if (!hot_can_relocate(inode, (u64)i << PAGE_CACHE_SHIFT, + PAGE_CACHE_SIZE, &skip, &end)) { + unsigned long next; + /* + * the function tells us how much to skip + * bump our counter by the suggested amount + */ + next = (skip + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; + i = max(i + 1, next); + continue; + } + + cluster = (PAGE_CACHE_ALIGN(end) >> PAGE_CACHE_SHIFT) - i; + cluster = min(cluster, max_cluster); + + if (i + cluster > ra_index) { + ra_index = max(i, ra_index); + btrfs_force_ra(inode->i_mapping, ra, NULL, ra_index, + cluster); + ra_index += max_cluster; + } + + mutex_lock(&inode->i_mutex); + ret = hot_load_file_extent(inode, pages, + i, cluster, storage_type); + if (ret < 0) { + mutex_unlock(&inode->i_mutex); + goto out_ra; + } + + count += ret; + balance_dirty_pages_ratelimited(inode->i_mapping); + mutex_unlock(&inode->i_mutex); + + if (ret > 0) { + i += ret; + last_len += ret << PAGE_CACHE_SHIFT; + } else { + i++; + last_len = 0; + } + } + + ret = count; + if (ret > 0) + hr->storage_type = storage_type; + +out_ra: + kfree(ra); + kfree(pages); +out_inode: + iput(inode); +out: + list_del_init(&hr->hot_range.reloc_list); + + hot_comm_item_put(&hr->hot_range); + + return ret; +} + +/* + * Main function iterates through heat map table and + * finds hot and cold data to move based on SSD pressure. + * + * First iterates through cold items below the heat + * threshold, if the item is on SSD and is now cold, + * we queue it up for relocation back to spinning disk. + * After scanning these items, we call relocation code + * on all ranges that have been queued up for moving + * to HDD. + * + * We then iterate through items above the heat threshold + * and if they are on HDD we queue them up to be moved to + * SSD. We then iterate through queue and move hot ranges + * to SSD if they are not already. + */ +void hot_do_relocate(struct hot_reloc *hot_reloc) +{ + struct hot_info *root; + struct hot_range_item *hr; + struct hot_comm_item *ci, *ci_next; + int i, ret = 0, thresh, ratio = 0; + u64 count, count_to_cold, count_to_hot; + static u32 run = 1; + + run++; + ratio = hot_update_threshold(hot_reloc, !(run % 15)); + thresh = hot_reloc->thresh; + + INIT_LIST_HEAD(&hot_reloc->hot_relocq[TYPE_NONROT]); + + /* Check and queue hot extents */ + count_to_hot = hot_search_extent(hot_reloc, + thresh, TYPE_NONROT); + if (count_to_hot == 0) + return; + + count_to_cold = HOT_RELOC_MAX_ITEMS; + + /* Don't move cold data to HDD unless there's space pressure */ + if (ratio < HIGH_WATER_LEVEL) + goto do_hot_reloc; + + INIT_LIST_HEAD(&hot_reloc->hot_relocq[TYPE_ROT]); + + /* + * Move up to RELOCATE_MAX_ITEMS cold ranges back to spinning + * disk. First, queue up items to move on the hot_relocq[TYPE_ROT]. + */ + root = hot_reloc->fs_info->sb->s_hot_root; + for (count = 0, count_to_cold = 0; (count < thresh) && + (count_to_cold < count_to_hot); count++) { + rcu_read_lock(); + if (!list_empty(&root->hot_map[TYPE_RANGE][count])) + ret = hot_queue_extent(hot_reloc, + &root->hot_map[TYPE_RANGE][count], + &count_to_cold, TYPE_ROT); + rcu_read_unlock(); + if (ret) + goto relocq_clean; + } + + /* Do the hot -> cold relocation */ + count_to_cold = 0; + list_for_each_entry_safe(ci, ci_next, + &hot_reloc->hot_relocq[TYPE_ROT], reloc_list) { + hr = container_of(ci, struct hot_range_item, hot_range); + ret = hot_relocate_extent(hr, hot_reloc, TYPE_ROT); + if ((ret == -ENOSPC) || (ret == -ENOMEM) || + kthread_should_stop()) + goto relocq_clean; + else if (ret > 0) + count_to_cold++; + } + + /* + * Move up to RELOCATE_MAX_ITEMS ranges to SSD. Periodically check + * for space pressure on SSD and directly return if we've exceeded + * the SSD capacity high water mark. + * First, queue up items to move on hot_relocq[TYPE_NONROT]. + */ +do_hot_reloc: + /* Do the cold -> hot relocation */ + count_to_hot = 0; + list_for_each_entry_safe(ci, ci_next, + &hot_reloc->hot_relocq[TYPE_NONROT], reloc_list) { + if (count_to_hot >= count_to_cold) + goto relocq_clean; + hr = container_of(ci, struct hot_range_item, hot_range); + ret = hot_relocate_extent(hr, hot_reloc, TYPE_NONROT); + if ((ret == -ENOSPC) || (ret == -ENOMEM) || + kthread_should_stop()) + goto relocq_clean; + else if (ret > 0) + count_to_hot++; + + /* + * If we've exceeded the SSD capacity high water mark, + * directly return. + */ + if ((count_to_hot != 0) && count_to_hot % 30 == 0) { + ratio = hot_update_threshold(hot_reloc, 1); + if (ratio >= HIGH_WATER_LEVEL) + goto relocq_clean; + } + } + + return; + +relocq_clean: + for (i = 0; i < MAX_RELOC_TYPES; i++) + hot_cleanup_relocq(&hot_reloc->hot_relocq[i]); +} + +/* Main loop for running relcation thread */ +static int hot_relocate_kthread(void *arg) +{ + struct hot_reloc *hot_reloc = arg; + unsigned long delay; + + do { + delay = HZ * HOT_RELOC_INTERVAL; + if (mutex_trylock(&hot_reloc->hot_reloc_mutex)) { + hot_do_relocate(hot_reloc); + mutex_unlock(&hot_reloc->hot_reloc_mutex); + } + + if (!try_to_freeze()) { + set_current_state(TASK_INTERRUPTIBLE); + if (!kthread_should_stop()) + schedule_timeout(delay); + __set_current_state(TASK_RUNNING); + } + } while (!kthread_should_stop()); + + return 0; +} + +/* Kick off the relocation kthread */ +int hot_relocate_init(struct btrfs_fs_info *fs_info) +{ + int i, ret = 0; + struct hot_reloc *hot_reloc; + + hot_reloc = kzalloc(sizeof(*hot_reloc), GFP_NOFS); + if (!hot_reloc) { + printk(KERN_ERR "%s: Failed to allocate memory for " + "hot_reloc\n", __func__); + return -ENOMEM; + } + + fs_info->hot_reloc = hot_reloc; + hot_reloc->fs_info = fs_info; + hot_reloc->thresh = HOT_RELOC_THRESHOLD; + for (i = 0; i < MAX_RELOC_TYPES; i++) + INIT_LIST_HEAD(&hot_reloc->hot_relocq[i]); + mutex_init(&hot_reloc->hot_reloc_mutex); + + hot_reloc->hot_reloc_kthread = kthread_run(hot_relocate_kthread, + hot_reloc, "hot_relocate_kthread"); + ret = IS_ERR(hot_reloc->hot_reloc_kthread); + if (ret) { + kthread_stop(hot_reloc->hot_reloc_kthread); + kfree(hot_reloc); + } + + return ret; +} + +void hot_relocate_exit(struct btrfs_fs_info *fs_info) +{ + struct hot_reloc *hot_reloc = fs_info->hot_reloc; + + if (hot_reloc->hot_reloc_kthread) + kthread_stop(hot_reloc->hot_reloc_kthread); + + kfree(hot_reloc); + fs_info->hot_reloc = NULL; +} diff --git a/fs/btrfs/hot_relocate.h b/fs/btrfs/hot_relocate.h new file mode 100644 index 0000000..1b1cfb5 --- /dev/null +++ b/fs/btrfs/hot_relocate.h @@ -0,0 +1,43 @@ +/* + * fs/btrfs/hot_relocate.h + * + * Copyright (C) 2013 IBM Corp. All rights reserved. + * Written by Zhi Yong Wu + * Ben Chociej + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + */ + +#ifndef __HOT_RELOCATE__ +#define __HOT_RELOCATE__ + +#include +#include "ctree.h" +#include "btrfs_inode.h" +#include "volumes.h" + +#define HOT_RELOC_INTERVAL 120 +#define HOT_RELOC_THRESHOLD 150 +#define HOT_RELOC_MAX_ITEMS 250 + +#define HEAT_MAX_VALUE (MAP_SIZE - 1) +#define HIGH_WATER_LEVEL 75 /* when to raise the threshold */ +#define LOW_WATER_LEVEL 50 /* when to lower the threshold */ +#define THRESH_UP_SPEED 10 /* how much to raise it by */ +#define THRESH_DOWN_SPEED 1 /* how much to lower it by */ +#define THRESH_MAX_VALUE 100 + +struct hot_reloc { + struct btrfs_fs_info *fs_info; + struct list_head hot_relocq[MAX_RELOC_TYPES]; + int thresh; + struct task_struct *hot_reloc_kthread; + struct mutex hot_reloc_mutex; +}; + +int hot_relocate_init(struct btrfs_fs_info *fs_info); +void hot_relocate_exit(struct btrfs_fs_info *fs_info); + +#endif /* __HOT_RELOCATE__ */ -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/