Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755730Ab3EUS7J (ORCPT ); Tue, 21 May 2013 14:59:09 -0400 Received: from mx1.redhat.com ([209.132.183.28]:26394 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752454Ab3EUS7I (ORCPT ); Tue, 21 May 2013 14:59:08 -0400 Date: Tue, 21 May 2013 21:00:27 +0200 From: Alexander Gordeev To: Tejun Heo Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, Jeff Garzik Subject: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2813 Lines: 78 Hi Tejun, This is a patch I sent to Jeff few months ago. As you asked, I am resending it on top of 3.10-rc2 Linus tree. Jeff has said he applied this patch, but I am not sure what exactly it means ;) Also, I am not sure about my reading of the statistics and the trade-off I identified (below), so this patch is a RFC. The numbers are taken by running 'if=/dev/sd{a,b,c} of=/dev/null' All time values is in us. Before this update host lock average holdtime was 3.266532061 and average waittime was 0.009832679 [1]. After the update average holdtime (slightly) rose up to 0.335267418 while average waittime decreased to 0.000320469 [2]. Which means host lock with local interrupt disabled is held roughly the same while the average waittime dropped 30 times. After this update port events are handled with local interrupts enabled and compete on individual per-port locks with average holdtime 1.540987475 and average waittime 0.000714864 [3]. Comparing to [1], ata_scsi_queuecmd() holds port locks 2 times less and waits for locks 13 times less. The downside of this change is introduction of a kernel thread and (supposedly) increased total average time of handling a AHCI interrupt - at most 1.5 times. The upside is better access times from ata_scsi_queuecmd() to port locks and moving port interrupt handling out of the hardware interrupt context. Thanks! Lock usage statistics. 1. ahci_interrupt vs ata_scsi_queuecmd (host->lock) Test holdtime-total waittime-total acquisitions holdtime-avg waittime-avg # 01. 22732497.77 93399.89 06393367 3.555637862 0.014608874 02. 20358052.08 52869.72 06454133 3.154265969 0.008191607 03. 20322516.57 54981.40 06459318 3.146232554 0.008511951 04. 18558686.89 39178.05 06469468 2.868657344 0.006055838 05. 19069799.90 31961.00 06455953 2.953831897 0.004950625 06. 23783542.56 97159.79 06387322 3.723554654 0.015211350 07. 23889266.74 102625.45 06386666 3.740491007 0.016068705 08. 19284522.61 32655.91 06450568 2.989585198 0.005062486 ----------- ----------- avg 3.266532061 0.009832679 2. ahci_single_irq_intr vs ahci_port_thread_fn (host->lock) Alexander Gordeev (1): AHCI: Optimize interrupt processing drivers/ata/acard-ahci.c | 8 ++--- drivers/ata/ahci.c | 54 ++++++++++++++++++------------- drivers/ata/ahci.h | 10 +++-- drivers/ata/ahci_platform.c | 3 +- drivers/ata/libahci.c | 74 +++++++++++++++++++++++++------------------ 5 files changed, 85 insertions(+), 64 deletions(-) -- 1.7.7.6 -- Regards, Alexander Gordeev agordeev@redhat.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/