Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 30 Sep 2002 21:12:24 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 30 Sep 2002 21:12:24 -0400 Received: from mesatop.zianet.com ([216.234.192.105]:32526 "HELO mesatop.zianet.com") by vger.kernel.org with SMTP id ; Mon, 30 Sep 2002 21:12:23 -0400 Subject: 2.5.39 Oops on boot (device_attach+0x3a) From: Steven Cole To: linux-kernel@vger.kernel.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.2-5mdk Date: 30 Sep 2002 19:13:02 -0600 Message-Id: <1033434784.3100.10.camel@localhost.localdomain> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3366 Lines: 78 I tried to boot 2.5.39 on my home machine and got the following oops on boot with CONFIG_KALLSYMS=y (thanks Ingo!). *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010286 EIP is at attach+0x1d/0x30 eax: c0276724 ebx: 00000000 ecx: c40c8060 edx: c40c8078 esi: c0276700 edi: 00000000 ebp: 00000000 esp: c40ddf94 ds: 0068 es: 0068 ss: 0068 Process swapper (pid: 1, threadinfo=c40dc000 task=c40da040) Stack: 00000000 c01a7a5a c40c8060 c40c8060 c01a7c20 c40c8060 c40c8060 c40c8060 c40d7720 c028b879 c40c8060 00000001 c02b9bf4 00000000 00000000 00000000 c027e6f2 c0105030 c010504c c0105030 00000000 00000000 00000000 c0105495 Call Trace: [] device_attach+0x3a/0x40 [] device_register+0xd0/0x120 [] init+0x0/0x160 [] init+0x1c/0x160 [] init+0x0/0x160 [] kernel_thread_helper+0x5/0x10 Code: 89 13 89 4c 24 08 5b e9 37 0d 00 00 8d b4 26 00 00 00 00 57 Spurious 8959A interrupt: IRQ7 Kernel panic: Attempted to kill init! The "Spurious 8959A interrupt" message occurred only once among several boot attempts with slightly differently configured kernels (taking more and more stuff out like sound and usb). The traceback was the same each time however. The box is a Gateway P450 single PIII with Jabil motherboard. I have a Promise Ultra/66 disk controller installed. Support for the 20262 was compiled into 2.5.39 with CONFIG_BLK_DEV_PDC202XX_OLD=y and CONFIG_BLK_DEV_PDC202XX=y. Support for the PIIX4 was provided with CONFIG_BLK_DEV_PIIX=y. I tried booting with the onboard IDE and then the PDC20262 with the same oops above. Either of those work with 2.4.x kernels. Here is a snippet from dmesg from a normal 2.4.18 boot: fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at port 0x02f8 (irq = 10) is a 16550A block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio PDC20262: IDE controller on PCI bus 00 dev 78 PCI: Found IRQ 5 for device 00:0f.0 PDC20262: chipset revision 1 PDC20262: not 100% native mode: will probe irqs later PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide0: BM-DMA at 0x10c0-0x10c7, BIOS settings: hda:DMA, hdb:DMA ide2: BM-DMA at 0x10c8-0x10cf, BIOS settings: hde:DMA, hdf:pio hda: ST330620A, ATA DISK drive hdc: MATSHITADVD-ROM SR-8584A, ATAPI CD/DVD-ROM drive ide0 at 0x1440-0x1447,0x1436 on irq 5 ide1 at 0x170-0x177,0x376 on irq 15 hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66) hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Steven - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/