Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 1 Oct 2002 06:53:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 1 Oct 2002 06:53:28 -0400 Received: from 213-187-164-2.dd.nextgentel.com ([213.187.164.2]:8578 "EHLO mail.pronto.tv") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Tue, 1 Oct 2002 06:53:24 -0400 Content-Type: text/plain; charset=US-ASCII From: Roy Sigurd Karlsbakk Organization: ProntoTV AS To: Kernel mailing list Subject: Re: Panic in 2.5.39 Date: Tue, 1 Oct 2002 13:07:55 +0200 User-Agent: KMail/1.4.1 References: <200209291856.28828.roy@karlsbakk.net> In-Reply-To: <200209291856.28828.roy@karlsbakk.net> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Message-Id: <200210011307.55570.roy@karlsbakk.net> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12380 Lines: 320 did anyone see this? On Sunday 29 September 2002 18:56, Roy Sigurd Karlsbakk wrote: > hi all > > Trying out 2.5.39 on an intel D845GLLY (or ws it D845GLAD) board, I get > this cute little panic. Attached are lspci -vvv and .config. > > roy > > Unable to handle kernel paging request at virtual address 56112e2c > dec84f28 > *pde = 00000000 > Oops: 0002 > CPU: 0 > EIP: 0060:[] Not tainted > Using defaults from ksymoops -t elf32-i386 -a i386 > EFLAGS: 00010207 > eax: dec84f60 ebx: dec86820 ecx: dec86904 edx: dec86820 > esi: 00000000 edi: c0302850 ebp: 00000001 esp: deedde1c > ds: 0068 es: 0068 ss: 0068 > Stack: c014ed99 dec86820 0000002d 00000000 0000002d c039c5c0 dec86820 > c014f6f4 dec86820 dec86820 dec86820 c014f784 dec86820 dec80220 c014d866 > dec86820 00002e87 c0118bff 00002e87 00002e87 deeed3a0 decc8c00 c0150ca2 > dec80220 []clear_inode+0x69/0xb0 > []generic_forget_inode+0xe4/0x100 > []iput+0x54/0x60 > []dput+0xf6/0x150 > []call_console_drivers+0xdf/0xf0 > []__mntput+0x12/0xe0 > []usb_get_sb+0xe2/0xf0 > []printk+0x103/0x110 > []create_special_files+0x128/0x140 > []usbfs_add_bus+0x16/0xe0 > []usb_register_bus+0xf4/0x110 > []usb_hcd_pci_probe+0x372/0x3a0 > []pci_device_probe+0x3d/0x60 > []probe+0x18/0x30 > []found_match+0x24/0x50 > []do_driver_attach+0x35/0x40 > []bus_for_each_dev+0x4a/0x90 > []driver_attach+0x13/0x20 > []do_driver_attach+0x0/0x40 > []driver_register+0x5a/0x70 > []pci_register_driver+0x36/0x50 > []cdrom_sysctl_register+0x15/0x70 > []init+0x0/0x160 > []init+0x21/0x160 > []init+0x0/0x160 > []kernel_thread_helper+0x5/0x10 > Code: 00 88 cc de 48 77 7e c1 48 77 7e c1 00 a4 c8 de 80 81 40 40 > > ----------------------------------------------------------------- > bash-2.05# lspci -vvv > 00:00.0 Class 0600: 8086:2560 (rev 01) > Subsystem: 8086:2560 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [e4] #09 [1105] > > 00:02.0 Class 0300: 8086:2562 (rev 01) > Subsystem: 8086:4c59 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1d.0 Class 0c03: 8086:24c2 (rev 01) > Subsystem: 8086:4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at e800 [size=32] > > 00:1d.1 Class 0c03: 8086:24c4 (rev 01) > Subsystem: 8086:4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at e880 [size=32] > > 00:1d.2 Class 0c03: 8086:24c7 (rev 01) > Subsystem: 8086:4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > Interrupt: pin C routed to IRQ 5 > Region 4: I/O ports at ec00 [size=32] > > 00:1d.7 Class 0c03: 8086:24cd (rev 01) (prog-if 20) > Subsystem: 8086:4c59 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > Interrupt: pin D routed to IRQ 9 > Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] #0a [2080] > > 00:1e.0 Class 0604: 8086:244e (rev 81) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: ff800000-ff8fffff > Prefetchable memory behind bridge: e6a00000-e6afffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:1f.0 Class 0601: 8086:24c0 (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Step > ping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > > 00:1f.1 Class 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: 8086:4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at [size=8] > Region 1: I/O ports at [size=4] > Region 2: I/O ports at [size=8] > Region 3: I/O ports at [size=4] > Region 4: I/O ports at ffa0 [size=16] > Region 5: Memory at 1ff00000 (32-bit, non-prefetchable) [disabled] > [size > =1K] > > 00:1f.3 Class 0c05: 8086:24c3 (rev 01) > Subsystem: 8086:4c59 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at e000 [size=32] > > 00:1f.5 Class 0401: 8086:24c5 (rev 01) > Subsystem: 8086:0302 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at e400 [size=256] > Region 1: I/O ports at e080 [size=64] > Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3h > ot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 Class 0180: 105a:4d68 (rev 02) (prog-if 85) > Subsystem: 105a:4d68 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > SERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at dc00 [size=8] > Region 1: I/O ports at d880 [size=4] > Region 2: I/O ports at d800 [size=8] > Region 3: I/O ports at d480 [size=4] > Region 4: I/O ports at d400 [size=16] > Region 5: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at ff8f8000 [disabled] [size=16K] > Capabilities: [60] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:01.0 Class 0180: 105a:4d68 (rev 02) (prog-if 85) > Subsystem: 105a:4d68 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Step > ping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > SERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at d080 [size=8] > Region 1: I/O ports at d000 [size=4] > Region 2: I/O ports at df00 [size=8] > Region 3: I/O ports at de80 [size=4] > Region 4: I/O ports at de00 [size=16] > Region 5: Memory at ff8f4000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at ff8f0000 [disabled] [size=16K] > Capabilities: [60] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot > -,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:02.0 Class 0200: 8086:100e (rev 02) > Subsystem: 8086:002e > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Step > ping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 32 (63750ns min), cache line size 08 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ff8c0000 (32-bit, non-prefetchable) [size=128K] > Region 1: Memory at ff8a0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at dd80 [size=64] > Expansion ROM at ff880000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device. > Command: DPERE- ERO+ RBC=0 OST=0 > Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, > DC=simple, > DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- > Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable > - > Address: 0000000000000000 Data: 0000 > > 01:08.0 Class 0200: 8086:1039 (rev 81) > Subsystem: 8086:3013 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Step > ping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > - SERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at ff8ef000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at dd00 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot > +,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > bash-2.05# -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open Windows. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/