Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756064Ab3EYLJ2 (ORCPT ); Sat, 25 May 2013 07:09:28 -0400 Received: from mail-pd0-f170.google.com ([209.85.192.170]:63104 "EHLO mail-pd0-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754881Ab3EYLJX (ORCPT ); Sat, 25 May 2013 07:09:23 -0400 From: Daniel Tang To: linux-arm-kernel@lists.infradead.org, "linux@arm.linux.org.uk ARM Linux" Cc: Daniel Tang , Linus Walleij , Arnd Bergmann , "fabian@ritter-vogt.de Vogt" , Lionel Debroux , linux-kernel@vger.kernel.org, Mike Turquette Subject: [RFC PATCHv4 3/6] clk: TI-Nspire clock drivers Date: Sat, 25 May 2013 21:08:04 +1000 Message-Id: <1369480087-24786-4-git-send-email-dt.tangr@gmail.com> X-Mailer: git-send-email 1.8.1.3 In-Reply-To: <1369480087-24786-1-git-send-email-dt.tangr@gmail.com> References: <1369480087-24786-1-git-send-email-dt.tangr@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6423 Lines: 222 Add support for TI-Nspire clocks. Signed-off-by: Daniel Tang --- .../devicetree/bindings/clock/nspire-clock.txt | 24 ++++ drivers/clk/Makefile | 1 + drivers/clk/clk-nspire.c | 155 +++++++++++++++++++++ 3 files changed, 180 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/nspire-clock.txt create mode 100644 drivers/clk/clk-nspire.c diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt new file mode 100644 index 0000000..7c3bc8b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nspire-clock.txt @@ -0,0 +1,24 @@ +TI-NSPIRE Clocks + +Required properties: +- compatible: Valid compatible properties include: + "lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model + "lsi,nspire-classic-ahb-divider" for the AHB divider in the older model + "lsi,nspire-cx-clock" for the base clock in the CX model + "lsi,nspire-classic-clock" for the base clock in the older model + +- reg: Physical base address of the controller and length of memory mapped + region. + +Optional: +- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent + clock where it divides the rate from. + +Example: + +ahb_clk { + #clock-cells = <0>; + compatible = "lsi,nspire-cx-clock"; + reg = <0x900B0000 0x4>; + clocks = <&base_clk>; +}; diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 137d3e7..72ebbe1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o +obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/clk-nspire.c b/drivers/clk/clk-nspire.c new file mode 100644 index 0000000..2546f7d --- /dev/null +++ b/drivers/clk/clk-nspire.c @@ -0,0 +1,155 @@ +/* + * linux/drivers/clk/clk-nspire.c + * + * Copyright (C) 2013 Daniel Tang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#define MHZ (1000 * 1000) + +#define BASE_CPU_SHIFT 1 +#define BASE_CPU_MASK 0x7F + +#define CPU_AHB_SHIFT 12 +#define CPU_AHB_MASK 0x07 + +#define FIXED_BASE_SHIFT 8 +#define FIXED_BASE_MASK 0x01 + +#define CLASSIC_BASE_SHIFT 16 +#define CLASSIC_BASE_MASK 0x1F + +#define CX_BASE_SHIFT 15 +#define CX_BASE_MASK 0x3F + +#define CX_UNKNOWN_SHIFT 21 +#define CX_UNKNOWN_MASK 0x03 + +struct nspire_clk_info { + u32 base_clock; + u16 base_cpu_ratio; + u16 base_ahb_ratio; +}; + + +#define EXTRACT(var, prop) (((var)>>prop##_SHIFT) & prop##_MASK) +static void nspire_clkinfo_cx(u32 val, struct nspire_clk_info *clk) +{ + if (EXTRACT(val, FIXED_BASE)) + clk->base_clock = 48 * MHZ; + else + clk->base_clock = 6 * EXTRACT(val, CX_BASE) * MHZ; + + clk->base_cpu_ratio = EXTRACT(val, BASE_CPU) * EXTRACT(val, CX_UNKNOWN); + clk->base_ahb_ratio = clk->base_cpu_ratio * (EXTRACT(val, CPU_AHB) + 1); +} + +static void nspire_clkinfo_classic(u32 val, struct nspire_clk_info *clk) +{ + if (EXTRACT(val, FIXED_BASE)) + clk->base_clock = 27 * MHZ; + else + clk->base_clock = (300 - 6 * EXTRACT(val, CLASSIC_BASE)) * MHZ; + + clk->base_cpu_ratio = EXTRACT(val, BASE_CPU) * 2; + clk->base_ahb_ratio = clk->base_cpu_ratio * (EXTRACT(val, CPU_AHB) + 1); +} +#undef EXTRACT + +static void __init nspire_ahbdiv_setup(struct device_node *node, + void (*get_clkinfo)(u32, struct nspire_clk_info *)) +{ + u32 val; + void __iomem *io; + struct clk *clk; + const char *clk_name = node->name; + const char *parent_name; + struct nspire_clk_info info; + + io = of_iomap(node, 0); + if (!io) + return; + val = readl(io); + iounmap(io); + + get_clkinfo(val, &info); + + of_property_read_string(node, "clock-output-names", &clk_name); + parent_name = of_clk_get_parent_name(node, 0); + + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0, + 1, info.base_ahb_ratio); + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); +} + +static void __init nspire_ahbdiv_setup_cx(struct device_node *node) +{ + nspire_ahbdiv_setup(node, nspire_clkinfo_cx); +} + +static void __init nspire_ahbdiv_setup_classic(struct device_node *node) +{ + nspire_ahbdiv_setup(node, nspire_clkinfo_classic); +} + +CLK_OF_DECLARE(nspire_ahbdiv_cx, "lsi,nspire-cx-ahb-divider", + nspire_ahbdiv_setup_cx); +CLK_OF_DECLARE(nspire_ahbdiv_classic, "lsi,nspire-classic-ahb-divider", + nspire_ahbdiv_setup_classic); + +static void __init nspire_clk_setup(struct device_node *node, + void (*get_clkinfo)(u32, struct nspire_clk_info *)) +{ + u32 val; + void __iomem *io; + struct clk *clk; + const char *clk_name = node->name; + struct nspire_clk_info info; + + io = of_iomap(node, 0); + if (!io) + return; + val = readl(io); + iounmap(io); + + get_clkinfo(val, &info); + + of_property_read_string(node, "clock-output-names", &clk_name); + + clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, + info.base_clock); + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + return; + + pr_info("TI-NSPIRE Base: %uMHz CPU: %uMHz AHB: %uMHz\n", + info.base_clock / MHZ, + info.base_clock / info.base_cpu_ratio / MHZ, + info.base_clock / info.base_ahb_ratio / MHZ); +} + +static void __init nspire_clk_setup_cx(struct device_node *node) +{ + nspire_clk_setup(node, nspire_clkinfo_cx); +} + +static void __init nspire_clk_setup_classic(struct device_node *node) +{ + nspire_clk_setup(node, nspire_clkinfo_classic); +} + +CLK_OF_DECLARE(nspire_clk_cx, "lsi,nspire-cx-clock", nspire_clk_setup_cx); +CLK_OF_DECLARE(nspire_clk_classic, "lsi,nspire-classic-clock", + nspire_clk_setup_classic); -- 1.8.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/