Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966576Ab3E2TeI (ORCPT ); Wed, 29 May 2013 15:34:08 -0400 Received: from mail-ea0-f180.google.com ([209.85.215.180]:33828 "EHLO mail-ea0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S966427Ab3E2TdV (ORCPT ); Wed, 29 May 2013 15:33:21 -0400 From: Sebastian Hesselbarth To: Sebastian Hesselbarth Cc: David Miller , Lennert Buytenhek , Jason Cooper , Andrew Lunn , Benjamin Herrenschmidt , netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 12/13] ARM: kirkwood: remove redundant DT board files Date: Wed, 29 May 2013 21:32:54 +0200 Message-Id: <1369855975-21489-13-git-send-email-sebastian.hesselbarth@gmail.com> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1369855975-21489-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1369154510-4927-1-git-send-email-sebastian.hesselbarth@gmail.com> <1369855975-21489-1-git-send-email-sebastian.hesselbarth@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30002 Lines: 935 With DT support for mv643xx_eth board specific init for some boards now is unneccessary. Remove those board files, Kconfig entries, and corresponding entries in kirkwood_defconfig. Signed-off-by: Sebastian Hesselbarth --- Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed the lock-up is not caused by accessing clock gating registers but rather non-existent device registers. This will be addressed by dtsi separation for kirkwood and bobcat SoC variants. Changelog: v3->v4: - remove more boards that don't require board specific setup Cc: David Miller Cc: Lennert Buytenhek Cc: Jason Cooper Cc: Andrew Lunn Cc: Benjamin Herrenschmidt Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org --- arch/arm/configs/kirkwood_defconfig | 16 ---- arch/arm/mach-kirkwood/Kconfig | 117 ------------------------- arch/arm/mach-kirkwood/Makefile | 16 ---- arch/arm/mach-kirkwood/board-dnskw.c | 7 -- arch/arm/mach-kirkwood/board-dockstar.c | 32 ------- arch/arm/mach-kirkwood/board-dreamplug.c | 35 -------- arch/arm/mach-kirkwood/board-dt.c | 62 +------------ arch/arm/mach-kirkwood/board-goflexnet.c | 34 ------- arch/arm/mach-kirkwood/board-guruplug.c | 33 ------- arch/arm/mach-kirkwood/board-ib62x0.c | 29 ------ arch/arm/mach-kirkwood/board-iconnect.c | 10 --- arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 34 ------- arch/arm/mach-kirkwood/board-km_kirkwood.c | 44 ---------- arch/arm/mach-kirkwood/board-lsxl.c | 16 ---- arch/arm/mach-kirkwood/board-mplcec4.c | 14 --- arch/arm/mach-kirkwood/board-ns2.c | 35 -------- arch/arm/mach-kirkwood/board-openblocks_a6.c | 26 ------ arch/arm/mach-kirkwood/board-readynas.c | 6 -- arch/arm/mach-kirkwood/board-ts219.c | 13 --- arch/arm/mach-kirkwood/board-usi_topkick.c | 29 ------ 20 files changed, 1 insertion(+), 607 deletions(-) delete mode 100644 arch/arm/mach-kirkwood/board-dockstar.c delete mode 100644 arch/arm/mach-kirkwood/board-dreamplug.c delete mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c delete mode 100644 arch/arm/mach-kirkwood/board-guruplug.c delete mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c delete mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c delete mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c delete mode 100644 arch/arm/mach-kirkwood/board-ns2.c delete mode 100644 arch/arm/mach-kirkwood/board-openblocks_a6.c delete mode 100644 arch/arm/mach-kirkwood/board-usi_topkick.c diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index a1d8252..540ca51 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -30,27 +30,11 @@ CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_T5325=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y -CONFIG_MACH_CLOUDBOX_DT=y CONFIG_MACH_DLINK_KIRKWOOD_DT=y -CONFIG_MACH_DOCKSTAR_DT=y -CONFIG_MACH_DREAMPLUG_DT=y -CONFIG_MACH_GOFLEXNET_DT=y -CONFIG_MACH_GURUPLUG_DT=y -CONFIG_MACH_IB62X0_DT=y -CONFIG_MACH_ICONNECT_DT=y -CONFIG_MACH_INETSPACE_V2_DT=y -CONFIG_MACH_IOMEGA_IX2_200_DT=y -CONFIG_MACH_KM_KIRKWOOD_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_MPLCEC4_DT=y -CONFIG_MACH_NETSPACE_LITE_V2_DT=y -CONFIG_MACH_NETSPACE_MAX_V2_DT=y -CONFIG_MACH_NETSPACE_MINI_V2_DT=y -CONFIG_MACH_NETSPACE_V2_DT=y CONFIG_MACH_NSA310_DT=y -CONFIG_MACH_OPENBLOCKS_A6_DT=y CONFIG_MACH_READYNAS_DT=y -CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7509a89..c2fd30b 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -146,13 +146,6 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_CLOUDBOX_DT - bool "LaCie CloudBox NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - CloudBox NAS, using Flattened Device Tree. - config MACH_DLINK_KIRKWOOD_DT bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -161,69 +154,6 @@ config MACH_DLINK_KIRKWOOD_DT Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, using Flattened Device Tree. -config MACH_DOCKSTAR_DT - bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent Dockstar (Flattened Device Tree). - -config MACH_DREAMPLUG_DT - bool "Marvell DreamPlug (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell DreamPlug (Flattened Device Tree). - -config MACH_GOFLEXNET_DT - bool "Seagate GoFlex Net (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate GoFlex Net (Flattened Device Tree). - -config MACH_GURUPLUG_DT - bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board (Flattened Device Tree). - -config MACH_IB62X0_DT - bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - RaidSonic IB-NAS6210 & IB-NAS6220 devices, using - Flattened Device Tree. - -config MACH_ICONNECT_DT - bool "Iomega Iconnect (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here to enable Iomega Iconnect support. - -config MACH_INETSPACE_V2_DT - bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Internet Space v2 NAS, using Flattened Device Tree. - -config MACH_IOMEGA_IX2_200_DT - bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Iomega StorCenter ix2-200 (Flattened Device Tree). - -config MACH_KM_KIRKWOOD_DT - bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Keymile Kirkwood Reference Desgin, using Flattened Device Tree. - config MACH_LSXL_DT bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -239,39 +169,6 @@ config MACH_MPLCEC4_DT Say 'Y' here if you want your kernel to support the MPL CEC4 (Flattened Device Tree). -config MACH_NETSPACE_LITE_V2_DT - bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Lite v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MAX_V2_DT - bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Max v2 NAS, using Flattened Device Tree. - -config MACH_NETSPACE_MINI_V2_DT - bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Mini v2 NAS using Flattened Device Tree. - - This board is embedded in a product named CloudBox, which - provides automatic backup on a 100GB cloud storage. This - should not confused with a more recent LaCie NAS also named - CloudBox. For this last, the disk capacity is 1TB or above. - -config MACH_NETSPACE_V2_DT - bool "LaCie Network Space v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space v2 NAS, using Flattened Device Tree. - config MACH_NSA310_DT bool "ZyXEL NSA-310 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -280,13 +177,6 @@ config MACH_NSA310_DT Say 'Y' here if you want your kernel to support the ZyXEL NSA-310 board (Flattened Device Tree). -config MACH_OPENBLOCKS_A6_DT - bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Plat'Home OpenBlocks A6 (Flattened Device Tree). - config MACH_READYNAS_DT bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -296,13 +186,6 @@ config MACH_READYNAS_DT Say 'Y' here if you want your kernel to support the NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. -config MACH_TOPKICK_DT - bool "USI Topkick (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - USI Topkick, using Flattened Device Tree - config MACH_TS219_DT bool "Device Tree for QNAP TS-11X, TS-21X NAS" select ARCH_KIRKWOOD_DT diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index e1f3735..8e7fa4f 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -20,25 +20,9 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o -obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o -obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o -obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o -obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o -obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o -obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o -obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o -obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o -obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o -obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o -obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index a1aa87f..2af7a95 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,14 +14,9 @@ #include #include #include -#include #include #include "common.h" -static struct mv643xx_eth_platform_data dnskw_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - /* Register any GPIO for output and set the value */ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) { @@ -36,8 +31,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) void __init dnskw_init(void) { - kirkwood_ge00_init(&dnskw_ge00_data); - /* Set NAS to turn back on after a power failure */ dnskw_gpio_register(37, "dnskw:power:recover", 1); } diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c deleted file mode 100644 index d7196db..0000000 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-dockstar.c - * - * Seagate FreeAgent Dockstar Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Copied and modified for Seagate GoFlex Net support by - * Joshua Coombs based on ArchLinux ARM's - * GoFlex kernel patches. - * - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data dockstar_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init dockstar_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&dockstar_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c deleted file mode 100644 index 0903242..0000000 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-dreamplug.c - * - * Marvell DreamPlug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -void __init dreamplug_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 8db388a..e9c444c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -104,86 +104,26 @@ static void __init kirkwood_dt_init(void) kexec_reinit = kirkwood_enable_pcie; #endif - if (of_machine_is_compatible("globalscale,dreamplug")) - dreamplug_init(); - - if (of_machine_is_compatible("globalscale,guruplug")) - guruplug_dt_init(); - if (of_machine_is_compatible("dlink,dns-kirkwood")) dnskw_init(); - if (of_machine_is_compatible("iom,iconnect")) - iconnect_init(); - - if (of_machine_is_compatible("raidsonic,ib-nas62x0")) - ib62x0_init(); - if (of_machine_is_compatible("qnap,ts219")) qnap_dt_ts219_init(); - if (of_machine_is_compatible("seagate,dockstar")) - dockstar_dt_init(); - - if (of_machine_is_compatible("seagate,goflexnet")) - goflexnet_init(); - if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); - if (of_machine_is_compatible("iom,ix2-200")) - iomega_ix2_200_init(); - - if (of_machine_is_compatible("keymile,km_kirkwood")) - km_kirkwood_init(); - - if (of_machine_is_compatible("lacie,cloudbox") || - of_machine_is_compatible("lacie,inetspace_v2") || - of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_max_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2") || - of_machine_is_compatible("lacie,netspace_v2")) - ns2_init(); - if (of_machine_is_compatible("mpl,cec4")) mplcec4_init(); if (of_machine_is_compatible("netgear,readynas-duo-v2")) netgear_readynas_init(); - if (of_machine_is_compatible("plathome,openblocks-a6")) - openblocks_a6_init(); - - if (of_machine_is_compatible("usi,topkick")) - usi_topkick_init(); - of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); } static const char * const kirkwood_dt_board_compat[] = { - "globalscale,dreamplug", - "globalscale,guruplug", - "dlink,dns-320", - "dlink,dns-325", - "iom,iconnect", - "raidsonic,ib-nas62x0", - "qnap,ts219", - "seagate,dockstar", - "seagate,goflexnet", - "buffalo,lsxl", - "iom,ix2-200", - "keymile,km_kirkwood", - "lacie,cloudbox", - "lacie,inetspace_v2", - "lacie,netspace_lite_v2", - "lacie,netspace_max_v2", - "lacie,netspace_mini_v2", - "lacie,netspace_v2", - "mpl,cec4", - "netgear,readynas-duo-v2", - "plathome,openblocks-a6", - "usi,topkick", - "zyxel,nsa310", + "marvell,kirkwood", NULL }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c deleted file mode 100644 index 9db979a..0000000 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-goflexnet.c - * - * Seagate GoFlext Net Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * Copied and modified for Seagate GoFlex Net support by - * Joshua Coombs based on ArchLinux ARM's - * GoFlex kernel patches. - * - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data goflexnet_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init goflexnet_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&goflexnet_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c deleted file mode 100644 index a857163..0000000 --- a/arch/arm/mach-kirkwood/board-guruplug.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-guruplug.c - * - * Marvell Guruplug Reference Board Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data guruplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data guruplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -void __init guruplug_dt_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&guruplug_ge00_data); - kirkwood_ge01_init(&guruplug_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c deleted file mode 100644 index 9a857ae..0000000 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 (C), Simon Baatz - * - * arch/arm/mach-kirkwood/board-ib62x0.c - * - * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not - * converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data ib62x0_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init ib62x0_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&ib62x0_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index c8ebde4..fcaf136 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -11,18 +11,8 @@ #include #include #include -#include #include "common.h" -static struct mv643xx_eth_platform_data iconnect_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -void __init iconnect_init(void) -{ - kirkwood_ge00_init(&iconnect_ge00_data); -} - static int __init iconnect_pci_init(void) { if (of_machine_is_compatible("iom,iconnect")) diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c deleted file mode 100644 index e5f7041..0000000 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-kirkwood/board-iomega_ix2_200.c - * - * Iomega StorCenter ix2-200 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, -}; - -static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(11), -}; - -void __init iomega_ix2_200_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&iomega_ix2_200_ge00_data); - kirkwood_ge01_init(&iomega_ix2_200_ge01_data); -} diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c deleted file mode 100644 index 44e4605..0000000 --- a/arch/arm/mach-kirkwood/board-km_kirkwood.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern - * Valentin Longchamp - * - * arch/arm/mach-kirkwood/board-km_kirkwood.c - * - * Keymile km_kirkwood Reference Desing Init for drivers not converted to - * flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init km_kirkwood_init(void) -{ - struct clk *sata_clk; - /* - * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing - * SATA bits (14-15) of the Clock Gating Control Register. Since these - * devices are also not present in this variant, their clocks get - * disabled because unused when clk_disable_unused() gets called. - * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED - */ - sata_clk = clk_get_sys("sata_mv.0", "0"); - if (!IS_ERR(sata_clk)) - sata_clk->flags |= CLK_IGNORE_UNUSED; - sata_clk = clk_get_sys("sata_mv.0", "1"); - if (!IS_ERR(sata_clk)) - sata_clk->flags |= CLK_IGNORE_UNUSED; - - kirkwood_ge00_init(&km_kirkwood_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 4ec8b7a..3dc0929 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -14,17 +14,8 @@ #include #include #include -#include #include "common.h" -static struct mv643xx_eth_platform_data lsxl_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data lsxl_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -40,13 +31,6 @@ static void lsxl_power_off(void) void __init lsxl_init(void) { - /* - * Basic setup. Needs to be called early. - */ - - kirkwood_ge00_init(&lsxl_ge00_data); - kirkwood_ge01_init(&lsxl_ge01_data); - /* register power-off method */ pm_power_off = lsxl_power_off; } diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 7d6dc66..dd1f655 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -11,24 +11,10 @@ #include #include -#include #include "common.h" -static struct mv643xx_eth_platform_data mplcec4_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv643xx_eth_platform_data mplcec4_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(2), -}; - void __init mplcec4_init(void) { - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&mplcec4_ge00_data); - kirkwood_ge01_init(&mplcec4_ge01_data); kirkwood_pcie_init(KW_PCIE0); } diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c deleted file mode 100644 index f8f6605..0000000 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2012 (C), Simon Guinot - * - * arch/arm/mach-kirkwood/board-ns2.c - * - * LaCie Network Space v2 board (and parents) initialization for drivers - * not converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data ns2_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -void __init ns2_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - if (of_machine_is_compatible("lacie,cloudbox") || - of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2")) - ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - kirkwood_ge00_init(&ns2_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c deleted file mode 100644 index b11d8fd..0000000 --- a/arch/arm/mach-kirkwood/board-openblocks_a6.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 2012 Nobuhiro Iwamatsu - * - * arch/arm/mach-kirkwood/board-openblocks_a6.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data openblocks_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init openblocks_a6_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&openblocks_ge00_data); -} diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c index fb42c20..3ab3e0e 100644 --- a/arch/arm/mach-kirkwood/board-readynas.c +++ b/arch/arm/mach-kirkwood/board-readynas.c @@ -13,16 +13,10 @@ #include #include #include -#include #include #include "common.h" -static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - void __init netgear_readynas_init(void) { - kirkwood_ge00_init(&netgear_readynas_ge00_data); kirkwood_pcie_init(KW_PCIE0); } diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index acb0187..854d448 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -18,27 +18,14 @@ #include #include #include -#include #include #include #include #include "common.h" #include "tsx1x-common.h" -static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - void __init qnap_dt_ts219_init(void) { - u32 dev, rev; - - kirkwood_pcie_id(&dev, &rev); - if (dev == MV88F6282_DEV_ID) - qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); - - kirkwood_ge00_init(&qnap_ts219_ge00_data); - pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c deleted file mode 100644 index 1cc04ec..0000000 --- a/arch/arm/mach-kirkwood/board-usi_topkick.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2012 (C), Jason Cooper - * - * arch/arm/mach-kirkwood/board-usi_topkick.c - * - * USI Topkick Init for drivers not converted to flattened device tree yet. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include "common.h" - -static struct mv643xx_eth_platform_data topkick_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -void __init usi_topkick_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - kirkwood_ge00_init(&topkick_ge00_data); -} -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/