Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966818Ab3E2TfT (ORCPT ); Wed, 29 May 2013 15:35:19 -0400 Received: from mail-ea0-f181.google.com ([209.85.215.181]:40944 "EHLO mail-ea0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S966391Ab3E2TdR (ORCPT ); Wed, 29 May 2013 15:33:17 -0400 From: Sebastian Hesselbarth To: Sebastian Hesselbarth Cc: David Miller , Lennert Buytenhek , Jason Cooper , Andrew Lunn , Benjamin Herrenschmidt , netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v5 07/13] ARM: dove: add gigabit ethernet and mvmdio device tree nodes Date: Wed, 29 May 2013 21:32:49 +0200 Message-Id: <1369855975-21489-8-git-send-email-sebastian.hesselbarth@gmail.com> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1369855975-21489-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1369154510-4927-1-git-send-email-sebastian.hesselbarth@gmail.com> <1369855975-21489-1-git-send-email-sebastian.hesselbarth@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2663 Lines: 96 This patch adds orion-eth and mvmdio device tree nodes for DT enabled Dove boards. As there is only one ethernet controller on Dove, a default phy node is also added with a note to set its reg property on a per-board basis. Signed-off-by: Sebastian Hesselbarth --- Changelog: v3->v4: - convert to new device tree binding Cc: David Miller Cc: Lennert Buytenhek Cc: Jason Cooper Cc: Andrew Lunn Cc: Benjamin Herrenschmidt Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/dove-cubox.dts | 7 +++++++ arch/arm/boot/dts/dove.dtsi | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 7e3065a..02618fa 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -49,6 +49,13 @@ &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { status = "okay"; }; + +ðphy { + compatible = "marvell,88e1310"; + reg = <1>; +}; &sdio0 { status = "okay"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 6cab468..8612658 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -258,5 +258,40 @@ dmacap,xor; }; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; }; }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/