Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758866Ab3E3URn (ORCPT ); Thu, 30 May 2013 16:17:43 -0400 Received: from smtp89.ord1c.emailsrvr.com ([108.166.43.89]:55148 "EHLO smtp89.ord1c.emailsrvr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757722Ab3E3URi (ORCPT ); Thu, 30 May 2013 16:17:38 -0400 From: Mark Langsdorf To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, tj@kernel.org, grant.likely@linaro.org, rob.herring@calxeda.com, devicetree-discuss@lists.ozlabs.org Cc: Mark Langsdorf Subject: [PATCH 1/2] ahci: make ahci_transmit_led_message into a function pointer Date: Thu, 30 May 2013 15:17:30 -0500 Message-Id: <1369945051-2582-1-git-send-email-mark.langsdorf@calxeda.com> X-Mailer: git-send-email 1.8.1.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3432 Lines: 90 Create a new ata_port_operations function pointer called transmit_led_message and give it the default value of ahci_transmit_led_message. This allows AHCI controllers with non-standard LED interfaces to use the existing em_ interface. Signed-off-by: Mark Langsdorf --- drivers/ata/libahci.c | 11 ++++++----- include/linux/libata.h | 3 +++ 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 34c8216..0c36360 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -173,6 +173,7 @@ struct ata_port_operations ahci_ops = { .em_store = ahci_led_store, .sw_activity_show = ahci_activity_show, .sw_activity_store = ahci_activity_store, + .transmit_led_message = ahci_transmit_led_message, #ifdef CONFIG_PM .port_suspend = ahci_port_suspend, .port_resume = ahci_port_resume, @@ -774,7 +775,7 @@ static void ahci_start_port(struct ata_port *ap) /* EM Transmit bit maybe busy during init */ for (i = 0; i < EM_MAX_RETRY; i++) { - rc = ahci_transmit_led_message(ap, + rc = ap->ops->transmit_led_message(ap, emp->led_state, 4); if (rc == -EBUSY) @@ -915,7 +916,7 @@ static void ahci_sw_activity_blink(unsigned long arg) led_message |= (1 << 16); } spin_unlock_irqrestore(ap->lock, flags); - ahci_transmit_led_message(ap, led_message, 4); + ap->ops->transmit_led_message(ap, led_message, 4); } static void ahci_init_sw_activity(struct ata_link *link) @@ -1044,7 +1045,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, if (emp->blink_policy) state &= ~EM_MSG_LED_VALUE_ACTIVITY; - return ahci_transmit_led_message(ap, state, size); + return ap->ops->transmit_led_message(ap, state, size); } static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) @@ -1063,7 +1064,7 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) /* set the LED to OFF */ port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); - ahci_transmit_led_message(ap, port_led_state, 4); + ap->ops->transmit_led_message(ap, port_led_state, 4); } else { link->flags |= ATA_LFLAG_SW_ACTIVITY; if (val == BLINK_OFF) { @@ -1071,7 +1072,7 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ - ahci_transmit_led_message(ap, port_led_state, 4); + ap->ops->transmit_led_message(ap, port_led_state, 4); } } emp->blink_policy = val; diff --git a/include/linux/libata.h b/include/linux/libata.h index eae7a05..1d09b65 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -908,6 +908,9 @@ struct ata_port_operations { ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf); ssize_t (*sw_activity_store)(struct ata_device *dev, enum sw_activity val); + ssize_t (*transmit_led_message)(struct ata_port *ap, u32 state, + ssize_t size); + /* * Obsolete */ -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/