Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754087Ab3EaNIH (ORCPT ); Fri, 31 May 2013 09:08:07 -0400 Received: from smtp.eu.citrix.com ([46.33.159.39]:36581 "EHLO SMTP.EU.CITRIX.COM" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750866Ab3EaNIB (ORCPT ); Fri, 31 May 2013 09:08:01 -0400 X-IronPort-AV: E=Sophos;i="4.87,779,1363132800"; d="tmp'?dts'?scan'208";a="5205733" Message-ID: <1370005677.5199.138.camel@zakaz.uk.xensource.com> Subject: Re: DTB build failure due to preproccessing From: Ian Campbell To: Jon Loeliger CC: Grant Likely , linux-kernel , , Michal Marek , Stephen Warren , Rob Herring , Date: Fri, 31 May 2013 14:07:57 +0100 In-Reply-To: References: <1369996170.5199.68.camel@zakaz.uk.xensource.com> <20130531114824.60D223E0901@localhost> Organization: Citrix Systems, Inc. Content-Type: multipart/mixed; boundary="=-8Mn7XegAIASbxveTYZBv" X-Mailer: Evolution 3.4.4-1 MIME-Version: 1.0 X-Originating-IP: [10.30.203.1] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 30156 Lines: 962 --=-8Mn7XegAIASbxveTYZBv Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit On Fri, 2013-05-31 at 08:01 -0500, Jon Loeliger wrote: > > > > > > Line 374 is the "IDSEL 0x16..." line here: > > > interrupt-map = < > > > /* IRQ mapping for pci slots and ALI M1533 > > > ... > > > * management core also isn't used. > > > */ > > > > > > /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */ > > > 0x3000 0 0 1 &xps_intc_0 3 2 > > > 0x3000 0 0 2 &xps_intc_0 2 2 > > > 0x3000 0 0 3 &xps_intc_0 5 2 > > > 0x3000 0 0 4 &xps_intc_0 4 2 > > Can you show me the original source without mods here, please? This is Linux v3.10-rc3 arch/powerpc/boot/dts/virtex440-ml510.dts also attached. > Or is the "..." purely elided comments? Yes. > > > Which gets preprocessed into: > > > interrupt-map = < > > > # 375 "arch/powerpc/boot/dts/virtex440-ml510.dts" > > > 0x3000 0 0 1 &xps_intc_0 3 2 > > > 0x3000 0 0 2 &xps_intc_0 2 2 > > > 0x3000 0 0 3 &xps_intc_0 5 2 > > > 0x3000 0 0 4 &xps_intc_0 4 2 > > > > dtc is only able to track line numbers when the native /include/ > > directive is used. The #include directive doesn't help it. It should be > > added, but until it is the following patch solves the problem: > > It's supposed to do better than that, I think. > This, from dtc-lexer.l > > <*>^"#"(line)?{WS}+[0-9]+{WS}+{STRING}({WS}+[0-9]+)? { > char *line, *tmp, *fn; > /* skip text before line # */ > line = yytext; > while (!isdigit(*line)) > line++; > /* skip digits in line # */ > tmp = line; > while (!isspace(*tmp)) > tmp++; > /* "NULL"-terminate line # */ > *tmp = '\0'; > /* start of filename */ > fn = strchr(tmp + 1, '"') + 1; > /* strip trailing " from filename */ > tmp = strchr(fn, '"'); > *tmp = 0; > /* -1 since #line is the number of the next line */ > srcpos_set_line(xstrdup(fn), atoi(line) - 1); > } > > Hrm. Is this a "that's not in the kernel's copy yet" problem? > Or did this fail to match the offending '# ' somehow? > (Like, is that '# 375' really in column 1?) The "#" is in the first column. I've attached the actual file. Ian. --=-8Mn7XegAIASbxveTYZBv Content-Disposition: attachment; filename=".virtex440-ml510.dtb.dts.tmp" Content-Type: text/plain; name=".virtex440-ml510.dtb.dts.tmp"; charset="UTF-8" Content-Transfer-Encoding: 7bit # 1 "arch/powerpc/boot/dts/virtex440-ml510.dts" # 1 "" # 1 "" # 1 "arch/powerpc/boot/dts/virtex440-ml510.dts" # 12 "arch/powerpc/boot/dts/virtex440-ml510.dts" /dts-v1/; / { #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,ml510-ref-design", "xlnx,virtex440"; dcr-parent = <&ppc440_0>; DDR2_SDRAM_DIMM0: memory@0 { device_type = "memory"; reg = < 0x0 0x20000000 >; } ; alias { ethernet0 = &Hard_Ethernet_MAC; serial0 = &RS232_Uart_1; } ; chosen { bootargs = "console=ttyS0 root=/dev/ram"; linux,stdout-path = "/plb@0/serial@83e00000"; } ; cpus { #address-cells = <1>; #cpus = <0x1>; #size-cells = <0>; ppc440_0: cpu@0 { #address-cells = <1>; #size-cells = <1>; clock-frequency = <300000000>; compatible = "PowerPC,440", "ibm,ppc440"; d-cache-line-size = <0x20>; d-cache-size = <0x8000>; dcr-access-method = "native"; dcr-controller ; device_type = "cpu"; i-cache-line-size = <0x20>; i-cache-size = <0x8000>; model = "PowerPC,440"; reg = <0>; timebase-frequency = <300000000>; xlnx,apu-control = <0x2000>; xlnx,apu-udi-0 = <0x0>; xlnx,apu-udi-1 = <0x0>; xlnx,apu-udi-10 = <0x0>; xlnx,apu-udi-11 = <0x0>; xlnx,apu-udi-12 = <0x0>; xlnx,apu-udi-13 = <0x0>; xlnx,apu-udi-14 = <0x0>; xlnx,apu-udi-15 = <0x0>; xlnx,apu-udi-2 = <0x0>; xlnx,apu-udi-3 = <0x0>; xlnx,apu-udi-4 = <0x0>; xlnx,apu-udi-5 = <0x0>; xlnx,apu-udi-6 = <0x0>; xlnx,apu-udi-7 = <0x0>; xlnx,apu-udi-8 = <0x0>; xlnx,apu-udi-9 = <0x0>; xlnx,dcr-autolock-enable = <0x1>; xlnx,dcu-rd-ld-cache-plb-prio = <0x0>; xlnx,dcu-rd-noncache-plb-prio = <0x0>; xlnx,dcu-rd-touch-plb-prio = <0x0>; xlnx,dcu-rd-urgent-plb-prio = <0x0>; xlnx,dcu-wr-flush-plb-prio = <0x0>; xlnx,dcu-wr-store-plb-prio = <0x0>; xlnx,dcu-wr-urgent-plb-prio = <0x0>; xlnx,dma0-control = <0x0>; xlnx,dma0-plb-prio = <0x0>; xlnx,dma0-rxchannelctrl = <0x1010000>; xlnx,dma0-rxirqtimer = <0x3ff>; xlnx,dma0-txchannelctrl = <0x1010000>; xlnx,dma0-txirqtimer = <0x3ff>; xlnx,dma1-control = <0x0>; xlnx,dma1-plb-prio = <0x0>; xlnx,dma1-rxchannelctrl = <0x1010000>; xlnx,dma1-rxirqtimer = <0x3ff>; xlnx,dma1-txchannelctrl = <0x1010000>; xlnx,dma1-txirqtimer = <0x3ff>; xlnx,dma2-control = <0x0>; xlnx,dma2-plb-prio = <0x0>; xlnx,dma2-rxchannelctrl = <0x1010000>; xlnx,dma2-rxirqtimer = <0x3ff>; xlnx,dma2-txchannelctrl = <0x1010000>; xlnx,dma2-txirqtimer = <0x3ff>; xlnx,dma3-control = <0x0>; xlnx,dma3-plb-prio = <0x0>; xlnx,dma3-rxchannelctrl = <0x1010000>; xlnx,dma3-rxirqtimer = <0x3ff>; xlnx,dma3-txchannelctrl = <0x1010000>; xlnx,dma3-txirqtimer = <0x3ff>; xlnx,endian-reset = <0x0>; xlnx,generate-plb-timespecs = <0x1>; xlnx,icu-rd-fetch-plb-prio = <0x0>; xlnx,icu-rd-spec-plb-prio = <0x0>; xlnx,icu-rd-touch-plb-prio = <0x0>; xlnx,interconnect-imask = <0xffffffff>; xlnx,mplb-allow-lock-xfer = <0x1>; xlnx,mplb-arb-mode = <0x0>; xlnx,mplb-awidth = <0x20>; xlnx,mplb-counter = <0x500>; xlnx,mplb-dwidth = <0x80>; xlnx,mplb-max-burst = <0x8>; xlnx,mplb-native-dwidth = <0x80>; xlnx,mplb-p2p = <0x0>; xlnx,mplb-prio-dcur = <0x2>; xlnx,mplb-prio-dcuw = <0x3>; xlnx,mplb-prio-icu = <0x4>; xlnx,mplb-prio-splb0 = <0x1>; xlnx,mplb-prio-splb1 = <0x0>; xlnx,mplb-read-pipe-enable = <0x1>; xlnx,mplb-sync-tattribute = <0x0>; xlnx,mplb-wdog-enable = <0x1>; xlnx,mplb-write-pipe-enable = <0x1>; xlnx,mplb-write-post-enable = <0x1>; xlnx,num-dma = <0x0>; xlnx,pir = <0xf>; xlnx,ppc440mc-addr-base = <0x0>; xlnx,ppc440mc-addr-high = <0x1fffffff>; xlnx,ppc440mc-arb-mode = <0x0>; xlnx,ppc440mc-bank-conflict-mask = <0x1800000>; xlnx,ppc440mc-control = <0xf810008f>; xlnx,ppc440mc-max-burst = <0x8>; xlnx,ppc440mc-prio-dcur = <0x2>; xlnx,ppc440mc-prio-dcuw = <0x3>; xlnx,ppc440mc-prio-icu = <0x4>; xlnx,ppc440mc-prio-splb0 = <0x1>; xlnx,ppc440mc-prio-splb1 = <0x0>; xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>; xlnx,ppcdm-asyncmode = <0x0>; xlnx,ppcds-asyncmode = <0x0>; xlnx,user-reset = <0x0>; } ; } ; plb_v46_0: plb@0 { #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; ranges ; FLASH: flash@fc000000 { bank-width = <2>; compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; reg = < 0xfc000000 0x2000000 >; xlnx,family = "virtex5"; xlnx,include-datawidth-matching-0 = <0x1>; xlnx,include-datawidth-matching-1 = <0x0>; xlnx,include-datawidth-matching-2 = <0x0>; xlnx,include-datawidth-matching-3 = <0x0>; xlnx,include-negedge-ioregs = <0x0>; xlnx,include-plb-ipif = <0x1>; xlnx,include-wrbuf = <0x1>; xlnx,max-mem-width = <0x10>; xlnx,mch-native-dwidth = <0x20>; xlnx,mch-plb-clk-period-ps = <0x2710>; xlnx,mch-splb-awidth = <0x20>; xlnx,mch0-accessbuf-depth = <0x10>; xlnx,mch0-protocol = <0x0>; xlnx,mch0-rddatabuf-depth = <0x10>; xlnx,mch1-accessbuf-depth = <0x10>; xlnx,mch1-protocol = <0x0>; xlnx,mch1-rddatabuf-depth = <0x10>; xlnx,mch2-accessbuf-depth = <0x10>; xlnx,mch2-protocol = <0x0>; xlnx,mch2-rddatabuf-depth = <0x10>; xlnx,mch3-accessbuf-depth = <0x10>; xlnx,mch3-protocol = <0x0>; xlnx,mch3-rddatabuf-depth = <0x10>; xlnx,mem0-width = <0x10>; xlnx,mem1-width = <0x20>; xlnx,mem2-width = <0x20>; xlnx,mem3-width = <0x20>; xlnx,num-banks-mem = <0x1>; xlnx,num-channels = <0x2>; xlnx,priority-mode = <0x0>; xlnx,synch-mem-0 = <0x0>; xlnx,synch-mem-1 = <0x0>; xlnx,synch-mem-2 = <0x0>; xlnx,synch-mem-3 = <0x0>; xlnx,synch-pipedelay-0 = <0x2>; xlnx,synch-pipedelay-1 = <0x2>; xlnx,synch-pipedelay-2 = <0x2>; xlnx,synch-pipedelay-3 = <0x2>; xlnx,tavdv-ps-mem-0 = <0x1adb0>; xlnx,tavdv-ps-mem-1 = <0x3a98>; xlnx,tavdv-ps-mem-2 = <0x3a98>; xlnx,tavdv-ps-mem-3 = <0x3a98>; xlnx,tcedv-ps-mem-0 = <0x1adb0>; xlnx,tcedv-ps-mem-1 = <0x3a98>; xlnx,tcedv-ps-mem-2 = <0x3a98>; xlnx,tcedv-ps-mem-3 = <0x3a98>; xlnx,thzce-ps-mem-0 = <0x88b8>; xlnx,thzce-ps-mem-1 = <0x1b58>; xlnx,thzce-ps-mem-2 = <0x1b58>; xlnx,thzce-ps-mem-3 = <0x1b58>; xlnx,thzoe-ps-mem-0 = <0x1b58>; xlnx,thzoe-ps-mem-1 = <0x1b58>; xlnx,thzoe-ps-mem-2 = <0x1b58>; xlnx,thzoe-ps-mem-3 = <0x1b58>; xlnx,tlzwe-ps-mem-0 = <0x88b8>; xlnx,tlzwe-ps-mem-1 = <0x0>; xlnx,tlzwe-ps-mem-2 = <0x0>; xlnx,tlzwe-ps-mem-3 = <0x0>; xlnx,twc-ps-mem-0 = <0x1adb0>; xlnx,twc-ps-mem-1 = <0x3a98>; xlnx,twc-ps-mem-2 = <0x3a98>; xlnx,twc-ps-mem-3 = <0x3a98>; xlnx,twp-ps-mem-0 = <0x11170>; xlnx,twp-ps-mem-1 = <0x2ee0>; xlnx,twp-ps-mem-2 = <0x2ee0>; xlnx,twp-ps-mem-3 = <0x2ee0>; xlnx,xcl0-linesize = <0x4>; xlnx,xcl0-writexfer = <0x1>; xlnx,xcl1-linesize = <0x4>; xlnx,xcl1-writexfer = <0x1>; xlnx,xcl2-linesize = <0x4>; xlnx,xcl2-writexfer = <0x1>; xlnx,xcl3-linesize = <0x4>; xlnx,xcl3-writexfer = <0x1>; } ; Hard_Ethernet_MAC: xps-ll-temac@81c00000 { #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,compound"; ethernet@81c00000 { compatible = "xlnx,xps-ll-temac-1.01.b"; device_type = "network"; interrupt-parent = <&xps_intc_0>; interrupts = < 8 2 >; llink-connected = <&Hard_Ethernet_MAC_fifo>; local-mac-address = [ 02 00 00 00 00 00 ]; reg = < 0x81c00000 0x40 >; xlnx,bus2core-clk-ratio = <0x1>; xlnx,phy-type = <0x3>; xlnx,phyaddr = <0x1>; xlnx,rxcsum = <0x0>; xlnx,rxfifo = <0x8000>; xlnx,temac-type = <0x0>; xlnx,txcsum = <0x0>; xlnx,txfifo = <0x8000>; } ; } ; Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 { compatible = "xlnx,xps-ll-fifo-1.01.a"; interrupt-parent = <&xps_intc_0>; interrupts = < 6 2 >; reg = < 0x81a00000 0x10000 >; xlnx,family = "virtex5"; } ; IIC_EEPROM: i2c@81600000 { compatible = "xlnx,xps-iic-2.00.a"; interrupt-parent = <&xps_intc_0>; interrupts = < 9 2 >; reg = < 0x81600000 0x10000 >; xlnx,clk-freq = <0x5f5e100>; xlnx,family = "virtex5"; xlnx,gpo-width = <0x1>; xlnx,iic-freq = <0x186a0>; xlnx,scl-inertial-delay = <0x5>; xlnx,sda-inertial-delay = <0x5>; xlnx,ten-bit-adr = <0x0>; } ; LCD_OPTIONAL: gpio@81420000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = < 0x81420000 0x10000 >; xlnx,all-inputs = <0x0>; xlnx,all-inputs-2 = <0x0>; xlnx,dout-default = <0x0>; xlnx,dout-default-2 = <0x0>; xlnx,family = "virtex5"; xlnx,gpio-width = <0xb>; xlnx,interrupt-present = <0x0>; xlnx,is-bidir = <0x1>; xlnx,is-bidir-2 = <0x1>; xlnx,is-dual = <0x0>; xlnx,tri-default = <0xffffffff>; xlnx,tri-default-2 = <0xffffffff>; } ; LEDs_4Bit: gpio@81400000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = < 0x81400000 0x10000 >; xlnx,all-inputs = <0x0>; xlnx,all-inputs-2 = <0x0>; xlnx,dout-default = <0x0>; xlnx,dout-default-2 = <0x0>; xlnx,family = "virtex5"; xlnx,gpio-width = <0x4>; xlnx,interrupt-present = <0x0>; xlnx,is-bidir = <0x1>; xlnx,is-bidir-2 = <0x1>; xlnx,is-dual = <0x0>; xlnx,tri-default = <0xffffffff>; xlnx,tri-default-2 = <0xffffffff>; } ; RS232_Uart_1: serial@83e00000 { clock-frequency = <100000000>; compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; current-speed = <9600>; device_type = "serial"; interrupt-parent = <&xps_intc_0>; interrupts = < 11 2 >; reg = < 0x83e00000 0x10000 >; reg-offset = <0x1003>; reg-shift = <2>; xlnx,family = "virtex5"; xlnx,has-external-rclk = <0x0>; xlnx,has-external-xin = <0x0>; xlnx,is-a-16550 = <0x1>; } ; SPI_EEPROM: xps-spi@feff8000 { compatible = "xlnx,xps-spi-2.00.b"; interrupt-parent = <&xps_intc_0>; interrupts = < 10 2 >; reg = < 0xfeff8000 0x80 >; xlnx,family = "virtex5"; xlnx,fifo-exist = <0x1>; xlnx,num-ss-bits = <0x1>; xlnx,num-transfer-bits = <0x8>; xlnx,sck-ratio = <0x80>; } ; SysACE_CompactFlash: sysace@83600000 { compatible = "xlnx,xps-sysace-1.00.a"; interrupt-parent = <&xps_intc_0>; interrupts = < 7 2 >; reg = < 0x83600000 0x10000 >; xlnx,family = "virtex5"; xlnx,mem-width = <0x10>; } ; plbv46_pci_0: plbv46-pci@85e00000 { #size-cells = <2>; #address-cells = <3>; compatible = "xlnx,plbv46-pci-1.03.a"; device_type = "pci"; reg = < 0x85e00000 0x10000 >; # 350 "arch/powerpc/boot/dts/virtex440-ml510.dts" ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 0x01000000 0 0x00000000 0xf0000000 0 0x00010000>; #interrupt-cells = <1>; interrupt-parent = <&xps_intc_0>; interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < # 375 "arch/powerpc/boot/dts/virtex440-ml510.dts" 0x3000 0 0 1 &xps_intc_0 3 2 0x3000 0 0 2 &xps_intc_0 2 2 0x3000 0 0 3 &xps_intc_0 5 2 0x3000 0 0 4 &xps_intc_0 4 2 # 396 "arch/powerpc/boot/dts/virtex440-ml510.dts" 0x2800 0 0 1 &xps_intc_0 4 2 # 412 "arch/powerpc/boot/dts/virtex440-ml510.dts" 0x0800 0 0 1 &i8259 7 2 0x5800 0 0 1 &i8259 14 2 0x7800 0 0 1 &i8259 7 2 >; ali_m1533 { #size-cells = <1>; #address-cells = <2>; i8259: interrupt-controller@20 { reg = <1 0x20 2 1 0xa0 2 1 0x4d0 2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; interrupts = <1 3>; interrupt-parent = <&xps_intc_0>; }; }; } ; xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; reg = < 0xffff0000 0x10000 >; xlnx,family = "virtex5"; } ; xps_intc_0: interrupt-controller@81800000 { #interrupt-cells = <0x2>; compatible = "xlnx,xps-intc-1.00.a"; interrupt-controller ; reg = < 0x81800000 0x10000 >; xlnx,num-intr-inputs = <0xc>; } ; xps_tft_0: tft@86e00000 { compatible = "xlnx,xps-tft-1.00.a"; reg = < 0x86e00000 0x10000 >; xlnx,dcr-splb-slave-if = <0x1>; xlnx,default-tft-base-addr = <0x0>; xlnx,family = "virtex5"; xlnx,i2c-slave-addr = <0x76>; xlnx,mplb-awidth = <0x20>; xlnx,mplb-dwidth = <0x80>; xlnx,mplb-native-dwidth = <0x40>; xlnx,mplb-smallest-slave = <0x20>; xlnx,tft-interface = <0x1>; } ; } ; } ; --=-8Mn7XegAIASbxveTYZBv Content-Disposition: attachment; filename="virtex440-ml510.dts" Content-Type: text/x-csrc; name="virtex440-ml510.dts"; charset="UTF-8" Content-Transfer-Encoding: 7bit /* * Xilinx ML510 Reference Design support * * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design. * The reference design contains a bug which prevent PCI DMA from working * properly. A description of the bug is given in the plbv46_pci section. It * needs to be fixed by the user until Xilinx updates their reference design. * * Copyright 2009, Roderick Colenbrander */ /dts-v1/; / { #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,ml510-ref-design", "xlnx,virtex440"; dcr-parent = <&ppc440_0>; DDR2_SDRAM_DIMM0: memory@0 { device_type = "memory"; reg = < 0x0 0x20000000 >; } ; alias { ethernet0 = &Hard_Ethernet_MAC; serial0 = &RS232_Uart_1; } ; chosen { bootargs = "console=ttyS0 root=/dev/ram"; linux,stdout-path = "/plb@0/serial@83e00000"; } ; cpus { #address-cells = <1>; #cpus = <0x1>; #size-cells = <0>; ppc440_0: cpu@0 { #address-cells = <1>; #size-cells = <1>; clock-frequency = <300000000>; compatible = "PowerPC,440", "ibm,ppc440"; d-cache-line-size = <0x20>; d-cache-size = <0x8000>; dcr-access-method = "native"; dcr-controller ; device_type = "cpu"; i-cache-line-size = <0x20>; i-cache-size = <0x8000>; model = "PowerPC,440"; reg = <0>; timebase-frequency = <300000000>; xlnx,apu-control = <0x2000>; xlnx,apu-udi-0 = <0x0>; xlnx,apu-udi-1 = <0x0>; xlnx,apu-udi-10 = <0x0>; xlnx,apu-udi-11 = <0x0>; xlnx,apu-udi-12 = <0x0>; xlnx,apu-udi-13 = <0x0>; xlnx,apu-udi-14 = <0x0>; xlnx,apu-udi-15 = <0x0>; xlnx,apu-udi-2 = <0x0>; xlnx,apu-udi-3 = <0x0>; xlnx,apu-udi-4 = <0x0>; xlnx,apu-udi-5 = <0x0>; xlnx,apu-udi-6 = <0x0>; xlnx,apu-udi-7 = <0x0>; xlnx,apu-udi-8 = <0x0>; xlnx,apu-udi-9 = <0x0>; xlnx,dcr-autolock-enable = <0x1>; xlnx,dcu-rd-ld-cache-plb-prio = <0x0>; xlnx,dcu-rd-noncache-plb-prio = <0x0>; xlnx,dcu-rd-touch-plb-prio = <0x0>; xlnx,dcu-rd-urgent-plb-prio = <0x0>; xlnx,dcu-wr-flush-plb-prio = <0x0>; xlnx,dcu-wr-store-plb-prio = <0x0>; xlnx,dcu-wr-urgent-plb-prio = <0x0>; xlnx,dma0-control = <0x0>; xlnx,dma0-plb-prio = <0x0>; xlnx,dma0-rxchannelctrl = <0x1010000>; xlnx,dma0-rxirqtimer = <0x3ff>; xlnx,dma0-txchannelctrl = <0x1010000>; xlnx,dma0-txirqtimer = <0x3ff>; xlnx,dma1-control = <0x0>; xlnx,dma1-plb-prio = <0x0>; xlnx,dma1-rxchannelctrl = <0x1010000>; xlnx,dma1-rxirqtimer = <0x3ff>; xlnx,dma1-txchannelctrl = <0x1010000>; xlnx,dma1-txirqtimer = <0x3ff>; xlnx,dma2-control = <0x0>; xlnx,dma2-plb-prio = <0x0>; xlnx,dma2-rxchannelctrl = <0x1010000>; xlnx,dma2-rxirqtimer = <0x3ff>; xlnx,dma2-txchannelctrl = <0x1010000>; xlnx,dma2-txirqtimer = <0x3ff>; xlnx,dma3-control = <0x0>; xlnx,dma3-plb-prio = <0x0>; xlnx,dma3-rxchannelctrl = <0x1010000>; xlnx,dma3-rxirqtimer = <0x3ff>; xlnx,dma3-txchannelctrl = <0x1010000>; xlnx,dma3-txirqtimer = <0x3ff>; xlnx,endian-reset = <0x0>; xlnx,generate-plb-timespecs = <0x1>; xlnx,icu-rd-fetch-plb-prio = <0x0>; xlnx,icu-rd-spec-plb-prio = <0x0>; xlnx,icu-rd-touch-plb-prio = <0x0>; xlnx,interconnect-imask = <0xffffffff>; xlnx,mplb-allow-lock-xfer = <0x1>; xlnx,mplb-arb-mode = <0x0>; xlnx,mplb-awidth = <0x20>; xlnx,mplb-counter = <0x500>; xlnx,mplb-dwidth = <0x80>; xlnx,mplb-max-burst = <0x8>; xlnx,mplb-native-dwidth = <0x80>; xlnx,mplb-p2p = <0x0>; xlnx,mplb-prio-dcur = <0x2>; xlnx,mplb-prio-dcuw = <0x3>; xlnx,mplb-prio-icu = <0x4>; xlnx,mplb-prio-splb0 = <0x1>; xlnx,mplb-prio-splb1 = <0x0>; xlnx,mplb-read-pipe-enable = <0x1>; xlnx,mplb-sync-tattribute = <0x0>; xlnx,mplb-wdog-enable = <0x1>; xlnx,mplb-write-pipe-enable = <0x1>; xlnx,mplb-write-post-enable = <0x1>; xlnx,num-dma = <0x0>; xlnx,pir = <0xf>; xlnx,ppc440mc-addr-base = <0x0>; xlnx,ppc440mc-addr-high = <0x1fffffff>; xlnx,ppc440mc-arb-mode = <0x0>; xlnx,ppc440mc-bank-conflict-mask = <0x1800000>; xlnx,ppc440mc-control = <0xf810008f>; xlnx,ppc440mc-max-burst = <0x8>; xlnx,ppc440mc-prio-dcur = <0x2>; xlnx,ppc440mc-prio-dcuw = <0x3>; xlnx,ppc440mc-prio-icu = <0x4>; xlnx,ppc440mc-prio-splb0 = <0x1>; xlnx,ppc440mc-prio-splb1 = <0x0>; xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>; xlnx,ppcdm-asyncmode = <0x0>; xlnx,ppcds-asyncmode = <0x0>; xlnx,user-reset = <0x0>; } ; } ; plb_v46_0: plb@0 { #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; ranges ; FLASH: flash@fc000000 { bank-width = <2>; compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; reg = < 0xfc000000 0x2000000 >; xlnx,family = "virtex5"; xlnx,include-datawidth-matching-0 = <0x1>; xlnx,include-datawidth-matching-1 = <0x0>; xlnx,include-datawidth-matching-2 = <0x0>; xlnx,include-datawidth-matching-3 = <0x0>; xlnx,include-negedge-ioregs = <0x0>; xlnx,include-plb-ipif = <0x1>; xlnx,include-wrbuf = <0x1>; xlnx,max-mem-width = <0x10>; xlnx,mch-native-dwidth = <0x20>; xlnx,mch-plb-clk-period-ps = <0x2710>; xlnx,mch-splb-awidth = <0x20>; xlnx,mch0-accessbuf-depth = <0x10>; xlnx,mch0-protocol = <0x0>; xlnx,mch0-rddatabuf-depth = <0x10>; xlnx,mch1-accessbuf-depth = <0x10>; xlnx,mch1-protocol = <0x0>; xlnx,mch1-rddatabuf-depth = <0x10>; xlnx,mch2-accessbuf-depth = <0x10>; xlnx,mch2-protocol = <0x0>; xlnx,mch2-rddatabuf-depth = <0x10>; xlnx,mch3-accessbuf-depth = <0x10>; xlnx,mch3-protocol = <0x0>; xlnx,mch3-rddatabuf-depth = <0x10>; xlnx,mem0-width = <0x10>; xlnx,mem1-width = <0x20>; xlnx,mem2-width = <0x20>; xlnx,mem3-width = <0x20>; xlnx,num-banks-mem = <0x1>; xlnx,num-channels = <0x2>; xlnx,priority-mode = <0x0>; xlnx,synch-mem-0 = <0x0>; xlnx,synch-mem-1 = <0x0>; xlnx,synch-mem-2 = <0x0>; xlnx,synch-mem-3 = <0x0>; xlnx,synch-pipedelay-0 = <0x2>; xlnx,synch-pipedelay-1 = <0x2>; xlnx,synch-pipedelay-2 = <0x2>; xlnx,synch-pipedelay-3 = <0x2>; xlnx,tavdv-ps-mem-0 = <0x1adb0>; xlnx,tavdv-ps-mem-1 = <0x3a98>; xlnx,tavdv-ps-mem-2 = <0x3a98>; xlnx,tavdv-ps-mem-3 = <0x3a98>; xlnx,tcedv-ps-mem-0 = <0x1adb0>; xlnx,tcedv-ps-mem-1 = <0x3a98>; xlnx,tcedv-ps-mem-2 = <0x3a98>; xlnx,tcedv-ps-mem-3 = <0x3a98>; xlnx,thzce-ps-mem-0 = <0x88b8>; xlnx,thzce-ps-mem-1 = <0x1b58>; xlnx,thzce-ps-mem-2 = <0x1b58>; xlnx,thzce-ps-mem-3 = <0x1b58>; xlnx,thzoe-ps-mem-0 = <0x1b58>; xlnx,thzoe-ps-mem-1 = <0x1b58>; xlnx,thzoe-ps-mem-2 = <0x1b58>; xlnx,thzoe-ps-mem-3 = <0x1b58>; xlnx,tlzwe-ps-mem-0 = <0x88b8>; xlnx,tlzwe-ps-mem-1 = <0x0>; xlnx,tlzwe-ps-mem-2 = <0x0>; xlnx,tlzwe-ps-mem-3 = <0x0>; xlnx,twc-ps-mem-0 = <0x1adb0>; xlnx,twc-ps-mem-1 = <0x3a98>; xlnx,twc-ps-mem-2 = <0x3a98>; xlnx,twc-ps-mem-3 = <0x3a98>; xlnx,twp-ps-mem-0 = <0x11170>; xlnx,twp-ps-mem-1 = <0x2ee0>; xlnx,twp-ps-mem-2 = <0x2ee0>; xlnx,twp-ps-mem-3 = <0x2ee0>; xlnx,xcl0-linesize = <0x4>; xlnx,xcl0-writexfer = <0x1>; xlnx,xcl1-linesize = <0x4>; xlnx,xcl1-writexfer = <0x1>; xlnx,xcl2-linesize = <0x4>; xlnx,xcl2-writexfer = <0x1>; xlnx,xcl3-linesize = <0x4>; xlnx,xcl3-writexfer = <0x1>; } ; Hard_Ethernet_MAC: xps-ll-temac@81c00000 { #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,compound"; ethernet@81c00000 { compatible = "xlnx,xps-ll-temac-1.01.b"; device_type = "network"; interrupt-parent = <&xps_intc_0>; interrupts = < 8 2 >; llink-connected = <&Hard_Ethernet_MAC_fifo>; local-mac-address = [ 02 00 00 00 00 00 ]; reg = < 0x81c00000 0x40 >; xlnx,bus2core-clk-ratio = <0x1>; xlnx,phy-type = <0x3>; xlnx,phyaddr = <0x1>; xlnx,rxcsum = <0x0>; xlnx,rxfifo = <0x8000>; xlnx,temac-type = <0x0>; xlnx,txcsum = <0x0>; xlnx,txfifo = <0x8000>; } ; } ; Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 { compatible = "xlnx,xps-ll-fifo-1.01.a"; interrupt-parent = <&xps_intc_0>; interrupts = < 6 2 >; reg = < 0x81a00000 0x10000 >; xlnx,family = "virtex5"; } ; IIC_EEPROM: i2c@81600000 { compatible = "xlnx,xps-iic-2.00.a"; interrupt-parent = <&xps_intc_0>; interrupts = < 9 2 >; reg = < 0x81600000 0x10000 >; xlnx,clk-freq = <0x5f5e100>; xlnx,family = "virtex5"; xlnx,gpo-width = <0x1>; xlnx,iic-freq = <0x186a0>; xlnx,scl-inertial-delay = <0x5>; xlnx,sda-inertial-delay = <0x5>; xlnx,ten-bit-adr = <0x0>; } ; LCD_OPTIONAL: gpio@81420000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = < 0x81420000 0x10000 >; xlnx,all-inputs = <0x0>; xlnx,all-inputs-2 = <0x0>; xlnx,dout-default = <0x0>; xlnx,dout-default-2 = <0x0>; xlnx,family = "virtex5"; xlnx,gpio-width = <0xb>; xlnx,interrupt-present = <0x0>; xlnx,is-bidir = <0x1>; xlnx,is-bidir-2 = <0x1>; xlnx,is-dual = <0x0>; xlnx,tri-default = <0xffffffff>; xlnx,tri-default-2 = <0xffffffff>; } ; LEDs_4Bit: gpio@81400000 { compatible = "xlnx,xps-gpio-1.00.a"; reg = < 0x81400000 0x10000 >; xlnx,all-inputs = <0x0>; xlnx,all-inputs-2 = <0x0>; xlnx,dout-default = <0x0>; xlnx,dout-default-2 = <0x0>; xlnx,family = "virtex5"; xlnx,gpio-width = <0x4>; xlnx,interrupt-present = <0x0>; xlnx,is-bidir = <0x1>; xlnx,is-bidir-2 = <0x1>; xlnx,is-dual = <0x0>; xlnx,tri-default = <0xffffffff>; xlnx,tri-default-2 = <0xffffffff>; } ; RS232_Uart_1: serial@83e00000 { clock-frequency = <100000000>; compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; current-speed = <9600>; device_type = "serial"; interrupt-parent = <&xps_intc_0>; interrupts = < 11 2 >; reg = < 0x83e00000 0x10000 >; reg-offset = <0x1003>; reg-shift = <2>; xlnx,family = "virtex5"; xlnx,has-external-rclk = <0x0>; xlnx,has-external-xin = <0x0>; xlnx,is-a-16550 = <0x1>; } ; SPI_EEPROM: xps-spi@feff8000 { compatible = "xlnx,xps-spi-2.00.b"; interrupt-parent = <&xps_intc_0>; interrupts = < 10 2 >; reg = < 0xfeff8000 0x80 >; xlnx,family = "virtex5"; xlnx,fifo-exist = <0x1>; xlnx,num-ss-bits = <0x1>; xlnx,num-transfer-bits = <0x8>; xlnx,sck-ratio = <0x80>; } ; SysACE_CompactFlash: sysace@83600000 { compatible = "xlnx,xps-sysace-1.00.a"; interrupt-parent = <&xps_intc_0>; interrupts = < 7 2 >; reg = < 0x83600000 0x10000 >; xlnx,family = "virtex5"; xlnx,mem-width = <0x10>; } ; plbv46_pci_0: plbv46-pci@85e00000 { #size-cells = <2>; #address-cells = <3>; compatible = "xlnx,plbv46-pci-1.03.a"; device_type = "pci"; reg = < 0x85e00000 0x10000 >; /* * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to * 0 which means that a read/write to the memory mapped * i/o region (which starts at 0xa0000000) for pci * bar 0 on the plb side translates to 0. * It is important to set this value to 0xa0000000, so * that inbound and outbound pci transactions work * properly including DMA. */ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 0x01000000 0 0x00000000 0xf0000000 0 0x00010000>; #interrupt-cells = <1>; interrupt-parent = <&xps_intc_0>; interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < /* IRQ mapping for pci slots and ALI M1533 * periperhals. In total there are 5 interrupt * lines connected to a xps_intc controller. * Four of them are PCI IRQ A, B, C, D and * which correspond to respectively xpx_intc * 5, 4, 3 and 2. The fifth interrupt line is * connected to the south bridge and this one * uses irq 1 and is active high instead of * active low. * * The M1533 contains various peripherals * including AC97 audio, a modem, USB, IDE and * some power management stuff. The modem * isn't connected on the ML510 and the power * management core also isn't used. */ /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */ 0x3000 0 0 1 &xps_intc_0 3 2 0x3000 0 0 2 &xps_intc_0 2 2 0x3000 0 0 3 &xps_intc_0 5 2 0x3000 0 0 4 &xps_intc_0 4 2 /* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */ /* 0x11800 0 0 1 &xps_intc_0 5 0 2 0x11800 0 0 2 &xps_intc_0 4 0 2 0x11800 0 0 3 &xps_intc_0 3 0 2 0x11800 0 0 4 &xps_intc_0 2 0 2 */ /* According to the datasheet + schematic * ABCD [FPGA] of slot 5 is mapped to DABC. * Testing showed that at least A maps to B, * the mapping of the other pins is a guess * and for that reason the lines have been * commented out. */ /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */ 0x2800 0 0 1 &xps_intc_0 4 2 /* 0x2800 0 0 2 &xps_intc_0 3 2 0x2800 0 0 3 &xps_intc_0 2 2 0x2800 0 0 4 &xps_intc_0 5 2 */ /* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */ /* 0x11000 0 0 1 &xps_intc_0 4 0 2 0x11000 0 0 2 &xps_intc_0 3 0 2 0x11000 0 0 3 &xps_intc_0 2 0 2 0x11000 0 0 4 &xps_intc_0 5 0 2 */ /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */ 0x0800 0 0 1 &i8259 7 2 /* IDSEL 0x1b / dev=11, bus=0 / IDE */ 0x5800 0 0 1 &i8259 14 2 /* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */ 0x7800 0 0 1 &i8259 7 2 >; ali_m1533 { #size-cells = <1>; #address-cells = <2>; i8259: interrupt-controller@20 { reg = <1 0x20 2 1 0xa0 2 1 0x4d0 2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; /* south bridge irq is active high */ interrupts = <1 3>; interrupt-parent = <&xps_intc_0>; }; }; } ; xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; reg = < 0xffff0000 0x10000 >; xlnx,family = "virtex5"; } ; xps_intc_0: interrupt-controller@81800000 { #interrupt-cells = <0x2>; compatible = "xlnx,xps-intc-1.00.a"; interrupt-controller ; reg = < 0x81800000 0x10000 >; xlnx,num-intr-inputs = <0xc>; } ; xps_tft_0: tft@86e00000 { compatible = "xlnx,xps-tft-1.00.a"; reg = < 0x86e00000 0x10000 >; xlnx,dcr-splb-slave-if = <0x1>; xlnx,default-tft-base-addr = <0x0>; xlnx,family = "virtex5"; xlnx,i2c-slave-addr = <0x76>; xlnx,mplb-awidth = <0x20>; xlnx,mplb-dwidth = <0x80>; xlnx,mplb-native-dwidth = <0x40>; xlnx,mplb-smallest-slave = <0x20>; xlnx,tft-interface = <0x1>; } ; } ; } ; --=-8Mn7XegAIASbxveTYZBv-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/