Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756564Ab3FGSMc (ORCPT ); Fri, 7 Jun 2013 14:12:32 -0400 Received: from 18.mo1.mail-out.ovh.net ([46.105.35.72]:41203 "EHLO mo1.mail-out.ovh.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755813Ab3FGSMb (ORCPT ); Fri, 7 Jun 2013 14:12:31 -0400 X-Greylist: delayed 22322 seconds by postgrey-1.27 at vger.kernel.org; Fri, 07 Jun 2013 14:12:31 EDT From: Boris BREZILLON To: Mike Turquette , Jean-Christophe Plagniol-Villard , Nicolas Ferre , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Russell King X-Ovh-Mailout: 178.32.228.1 (mo1.mail-out.ovh.net) Subject: [RFC PATCH 38/50] ARM: at91/dt: move at91sam9263 SoC to new at91 clk implem Date: Fri, 7 Jun 2013 20:12:28 +0200 Message-Id: <1370628748-2840-1-git-send-email-b.brezillon@overkiz.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1370615115-16979-1-git-send-email-b.brezillon@overkiz.com> References: <1370615115-16979-1-git-send-email-b.brezillon@overkiz.com> X-Ovh-Tracer-Id: 2531304467311065116 X-Ovh-Remote: 78.236.240.82 (cha74-5-78-236-240-82.fbx.proxad.net) X-Ovh-Local: 213.186.33.20 (ns0.ovh.net) X-OVH-SPAMSTATE: OK X-OVH-SPAMSCORE: -100 X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeiiedrgeduucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd X-Spam-Check: DONE|U 0.5/N X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeiiedrgeduucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7831 Lines: 308 Define at91sam9263 clocks in at91sam9263 device tree. Add references to the appropriate clocks in each peripheral. Signed-off-by: Boris BREZILLON --- arch/arm/boot/dts/at91sam9263.dtsi | 135 ++++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index ff63811..f948575 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -64,6 +64,106 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main", "fixed-clock"; + #clock-cells = <0>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + clocks = <&main>; + id = <0>; + input = <1000000 32000000>; + output = <80000000 200000000 + 190000000 240000000>; + out = <0 2>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + clocks = <&main>; + id = <1>; + input = <1000000 32000000>; + output = <80000000 200000000 + 190000000 240000000>; + out = <0 2>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + output = <0 120000000>; + divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + divisors = <1 2 4 0>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #clock-cells = <1>; + ids = <0 1 2 3>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + clock-output-names = "prog0", "prog1", "prog2", "prog3"; + }; + + system: systemck { + compatible = "atmel,at91rm9200-clk-system"; + #clock-cells = <1>; + ids = <6 7 8 9 10 11>; + clocks = <&usb>, <&usb>, <&prog 0>, <&prog 1>, <&prog 2>, + <&prog 3>; + clock-output-names = "udpck", "uhpck", "pck0", "pck1", + "pck2", "pck3"; + }; + + periph: periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #clock-cells = <1>; + clocks = <&mck>; + ids = <2 3 4 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 23 24 25 26 27 29>; + clock-output-names = "pioA_clk", + "pioB_clk", + "pioCDE_clk", + "usart0_clk", + "usart1_clk", + "usart2_clk", + "mci0_clk", + "mci1_clk", + "can_clk", + "twi_clk", + "spi0_clk", + "spi1_clk", + "ssc0_clk", + "ssc1_clk", + "ac97_clk", + "tcb_clk", + "pwm_clk", + "pclk", + "2dge_clk", + "udc_clk", + "isi_clk", + "lcdc_clk", + "dma_clk", + "ohci_clk"; + + }; }; ramc: ramc@ffffe200 { @@ -76,12 +176,15 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&periph 19>; + clock-names = "t0_clk"; }; rstc@fffffd00 { @@ -370,6 +473,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 2>; }; pioB: gpio@fffff400 { @@ -380,6 +484,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 3>; }; pioC: gpio@fffff600 { @@ -390,6 +495,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; pioD: gpio@fffff800 { @@ -400,6 +506,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; pioE: gpio@fffffa00 { @@ -410,6 +517,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; }; @@ -419,6 +527,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -430,6 +540,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&periph 7>; + clock-names = "usart"; status = "disabled"; }; @@ -441,6 +553,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&periph 8>; + clock-names = "usart"; status = "disabled"; }; @@ -452,6 +566,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&periph 9>; + clock-names = "usart"; status = "disabled"; }; @@ -461,6 +577,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&periph 16>; + clock-names = "pclk"; status = "disabled"; }; @@ -470,6 +588,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&periph 17>; + clock-names = "pclk"; status = "disabled"; }; @@ -479,6 +599,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&periph 21>, <&periph 21>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -486,6 +608,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&periph 24>, <&system 7>; + clock-names = "udc_clk", "udpck"; status = "disabled"; }; @@ -495,6 +619,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 13>; status = "disabled"; }; @@ -504,6 +629,8 @@ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 10>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -513,6 +640,8 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 11>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -530,6 +659,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&periph 14>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -541,6 +672,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&periph 15>; + clock-names = "spi_clk"; status = "disabled"; }; }; @@ -567,6 +700,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&periph 29>, <&periph 29>, <&system 6>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/