Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756747Ab3FGUk5 (ORCPT ); Fri, 7 Jun 2013 16:40:57 -0400 Received: from e7.ny.us.ibm.com ([32.97.182.137]:38158 "EHLO e7.ny.us.ibm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754831Ab3FGUk4 (ORCPT ); Fri, 7 Jun 2013 16:40:56 -0400 Date: Fri, 7 Jun 2013 13:40:08 -0700 From: Sukadev Bhattiprolu To: mingo@kernel.org, Paul Mackerras Cc: Stephane Eranian , michael@ellerman.id.au, Anton Blanchard , linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/2] perf/Power7: Save dcache_src fields in sample record. Message-ID: <20130607204008.GA3281@us.ibm.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Operating-System: Linux 2.0.32 on an i486 User-Agent: Mutt/1.5.21 (2010-09-15) X-TM-AS-MML: No X-Content-Scanned: Fidelis XPS MAILER x-cbid: 13060720-5806-0000-0000-000021994DEF Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8780 Lines: 238 From: Sukadev Bhattiprolu Date: Wed, 8 May 2013 22:59:29 -0700 Subject: [PATCH 1/2] perf/Power7: Save dcache_src fields in sample record. Power7 saves the "perf-event vector" information in the mmcra register. Included in this event vector is a "data-cache source" field which identifies where in the memory-hierarchy the data for an instruction was found. Use the 'struct perf_mem_data_source' to export the "data-cache source" field to user space. The mapping between the Power7 hierarchy levels and the arch-neutral levels is, unfortunately, not trivial. Arch-neutral levels Power7 levels --------------------------------------------------------- local LVL_L2 local (same core) L2 (FROM_L2) local LVL_L3 local (same core) L3 (FROM_L3) 1-hop REM_CCE1 different core on same chip (FROM_L2.1, _L3.1) 2-hops REM_CCE2 remote (different chip, same node) (FROM_RL2L3) 3-hops REM_CCE3* distant (different node) (FROM_DL2L3) 1-hop REM_MEM1 unused 2-hops REM_MEM2 remote (different chip, same node) (FROM_RMEM) 3-hops REM_MEM3* distant (different node) (FROM_DMEM) * proposed "extended" levels. AFAICT, Power7 supports one extra level in the cache-hierarchy, so we propose to add a new cache level, REM_CCE3 shown above. To maintain consistency in terminology (i.e 2-hops = remote, 3-hops = distant), I propose leaving the REM_MEM1 unused and adding another level, REM_MEM3. Further, in the above REM_CCE1 case, Power7 can also identify if the data came from the L2 or L3 cache of another core on the same chip. To describe this to user space, we propose to set ->mem_lvl to: PERF_MEM_LVL_REM_CCE1|PERF_MEM_LVL_L2 PERF_MEM_LVL_REM_CCE1|PERF_MEM_LVL_L3 Either that or we could leave REM_CCE1 unused in Power and add two more levels: PERF_MEM_XLVL_REM_L2_CCE1 PERF_MEM_XLVL_REM_L3_CCE1 The former approach seems less confusing and this patch uses that approach. Signed-off-by: Sukadev Bhattiprolu --- arch/powerpc/include/asm/perf_event_server.h | 2 + arch/powerpc/perf/core-book3s.c | 4 + arch/powerpc/perf/power7-pmu.c | 81 ++++++++++++++++++++++++++ include/uapi/linux/perf_event.h | 12 +++- 4 files changed, 97 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index f265049..f2d162b 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -37,6 +37,8 @@ struct power_pmu { void (*config_bhrb)(u64 pmu_bhrb_filter); void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); int (*limited_pmc_event)(u64 event_id); + void (*get_mem_data_src)(struct perf_sample_data *data, + struct pt_regs *regs); u32 flags; const struct attribute_group **attr_groups; int n_generic; diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 426180b..7778fa9 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1632,6 +1632,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val, data.br_stack = &cpuhw->bhrb_stack; } + if (event->attr.sample_type & PERF_SAMPLE_DATA_SRC && + ppmu->get_mem_data_src) + ppmu->get_mem_data_src(&data, regs); + if (perf_event_overflow(event, &data, regs)) power_pmu_stop(event, 0); } diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c index 3c475d6..af92bfe 100644 --- a/arch/powerpc/perf/power7-pmu.c +++ b/arch/powerpc/perf/power7-pmu.c @@ -209,6 +209,85 @@ static int power7_get_alternatives(u64 event, unsigned int flags, u64 alt[]) return nalt; } +#define POWER7_MMCRA_PEMPTY (0x1L << 63) +#define POWER7_MMCRA_FIN_STALL (0x1L << 62) +#define POWER7_MMCRA_CMPL_STALL (0x1L << 61) +#define POWER7_MMCRA_STALL_REASON_MASK (0xFL << 60) + +#define POWER7_MMCRA_DCACHE_MISS (0x1L << 55) + +#define POWER7_MMCRA_DCACHE_SRC_SHIFT 51 +#define POWER7_MMCRA_DCACHE_SRC_MASK (0xFL << POWER7_MMCRA_DCACHE_SRC_SHIFT) + +#define POWER7_MMCRA_MDTLB_MISS (0x1L << 50) + +#define POWER7_MMCRA_MDTLB_SRC_SHIFT 46 +#define POWER7_MMCRA_MDTLB_SRC_MASK (0xFL << POWER7_MMCRA_MDTLB_SRC_SHIFT) + +#define POWER7_MMCRA_MDERAT_MISS (0x1L<< 45) +#define POWER7_MMCRA_MLSU_REJ (0x1L<< 44) + +/* and so on */ + +/* + * Map DCACHE_SRC fields to the Linux memory hierarchy levels. + * + * Bits 9..12 in the MMCRA indicate the source of a data-cache entry, with + * each of the 16 possible values referring to a specific source. Eg: if + * the 4-bits have the value 1 (0b0001), the dcache entry was found local + * L3 cache. + * + * We use the table, dcache_src_map, to map this value 1 to PERF_MEM_LVL_L3, + * the arch-neutral representation of the L3 cache. + * + * Similarly, in case of marked data TLB miss, bits 14..17 of the MMCRA + * indicate the load source of a marked DTLB entry. dtlb_src_map[] gives + * the mapping to the arch-neutral values of the TLB source. + * + * Architecture neutral to Power7 hierarchy levels: + * 1-hop = different core on same chip (L2.1 or L3.1) + * 2-hops = remote (different chip on same node) + * 3-hops = distant (different node) + */ +static u64 dcache_src_map[] = { + PERF_MEM_S(LVL, L2), /* 00: FROM_L2 */ + PERF_MEM_S(LVL, L3), /* 01: FROM_L3 */ + PERF_MEM_S(LVL, NA), /* 02: Reserved */ + PERF_MEM_S(LVL, NA), /* 03: Reserved */ + + PERF_MEM_LVL_L2|PERF_MEM_LVL_REM_CCE1, /* 04: FROM_L2.1_SHR */ + PERF_MEM_LVL_L2|PERF_MEM_LVL_REM_CCE1, /* 05: FROM_L3.1_MOD */ + PERF_MEM_LVL_L3|PERF_MEM_LVL_REM_CCE1, /* 06: FROM_L2.1_SHR */ + PERF_MEM_LVL_L3|PERF_MEM_LVL_REM_CCE1, /* 07: FROM_L3.1_MOD */ + + PERF_MEM_S(LVL, REM_CCE2), /* 08: FROM_RL2L3_SHR */ + PERF_MEM_S(LVL, REM_CCE2), /* 09: FROM_RL2L3_MOD */ + PERF_MEM_S(XLVL, REM_CCE3), /* 10: FROM_DL2L3_SHR */ + PERF_MEM_S(XLVL, REM_CCE3), /* 11: FROM_DL2L3_MOD */ + + PERF_MEM_S(LVL, LOC_RAM), /* 12: FROM_LMEM */ + PERF_MEM_S(LVL, REM_RAM2), /* 13: FROM_RMEM */ + PERF_MEM_S(XLVL, REM_RAM3), /* 14: FROM_DMEM */ + + PERF_MEM_S(LVL, NA), /* 15: Reserved */ +}; + + +static void power7_get_mem_data_src(struct perf_sample_data *data, + struct pt_regs *regs) +{ + unsigned long idx; + unsigned long mmcra = regs->dsisr; + union perf_mem_data_src *dsrc = &data->data_src; + + if (mmcra & POWER7_MMCRA_DCACHE_MISS) { + idx = mmcra & POWER7_MMCRA_DCACHE_SRC_MASK; + idx >>= POWER7_MMCRA_DCACHE_SRC_SHIFT; + + dsrc->val |= dcache_src_map[idx]; + } +} + /* * Returns 1 if event counts things relating to marked instructions * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. @@ -438,6 +517,7 @@ static const struct attribute_group *power7_pmu_attr_groups[] = { NULL, }; + static struct power_pmu power7_pmu = { .name = "POWER7", .n_counter = 6, @@ -447,6 +527,7 @@ static struct power_pmu power7_pmu = { .compute_mmcr = power7_compute_mmcr, .get_constraint = power7_get_constraint, .get_alternatives = power7_get_alternatives, + .get_mem_data_src = power7_get_mem_data_src, .disable_pmc = power7_disable_pmc, .flags = PPMU_ALT_SIPR, .attr_groups = power7_pmu_attr_groups, diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index fb104e5..f8d3269 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -627,7 +627,8 @@ union perf_mem_data_src { mem_snoop:5, /* snoop mode */ mem_lock:2, /* lock instr */ mem_dtlb:7, /* tlb access */ - mem_rsvd:31; + mem_xlvl:2, /* extended memory levels */ + mem_rsvd:29; }; }; @@ -654,7 +655,7 @@ union perf_mem_data_src { #define PERF_MEM_LVL_REM_CCE2 0x800 /* Remote Cache (2 hops) */ #define PERF_MEM_LVL_IO 0x1000 /* I/O memory */ #define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ -#define PERF_MEM_LVL_SHIFT 5 +#define PERF_MEM_LVL_SHIFT 5 /* see also extended levels below */ /* snoop mode */ #define PERF_MEM_SNOOP_NA 0x01 /* not available */ @@ -679,6 +680,13 @@ union perf_mem_data_src { #define PERF_MEM_TLB_OS 0x40 /* OS fault handler */ #define PERF_MEM_TLB_SHIFT 26 +#define PERF_MEM_XLVL_REM_RAM3 0x01 /* Remote memory (3 hops) */ +#define PERF_MEM_XLVL_REM_CCE3 0x02 /* Remote cache (3 hops) */ +#define PERF_MEM_XLVL_SHIFT 33 + +/* Miscellaneous flags */ +#define PERF_MEM_MISC_CCE_MOD 0x4000 /* cache-hit, but entry was modified */ + #define PERF_MEM_S(a, s) \ (((u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/