Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754886Ab3FKNrO (ORCPT ); Tue, 11 Jun 2013 09:47:14 -0400 Received: from perceval.ideasonboard.com ([95.142.166.194]:35335 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753413Ab3FKNpm (ORCPT ); Tue, 11 Jun 2013 09:45:42 -0400 From: Laurent Pinchart To: linux-sh@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, Thierry Reding , Magnus Damm , Paul Mundt Subject: [PATCH v3 2/5] ARM: mach-shmobile: armadillo800eva: Add backlight support Date: Tue, 11 Jun 2013 15:45:41 +0200 Message-Id: <1370958344-19470-3-git-send-email-laurent.pinchart+renesas@ideasonboard.com> X-Mailer: git-send-email 1.8.1.5 In-Reply-To: <1370958344-19470-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> References: <1370958344-19470-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3611 Lines: 118 The flat panel backlight on the Armadillo 800 EVA board is driven by the TPU PWM output. Signed-off-by: Laurent Pinchart Tested-by: Simon Horman Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 55 +++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 44a6215..d3dcef5 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include #include #include #include @@ -386,7 +388,51 @@ static struct platform_device sh_eth_device = { .num_resources = ARRAY_SIZE(sh_eth_resources), }; -/* LCDC */ +/* PWM */ +static struct resource pwm_resources[] = { + [0] = { + .start = 0xe6600000, + .end = 0xe66000ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct tpu_pwm_platform_data pwm_device_data = { + .channels[2] = { + .enabled = true, + .polarity = PWM_POLARITY_INVERSED, + } +}; + +static struct platform_device pwm_device = { + .name = "renesas_tpu_pwm", + .id = -1, + .dev = { + .platform_data = &pwm_device_data, + }, + .num_resources = ARRAY_SIZE(pwm_resources), + .resource = pwm_resources, +}; + +static struct pwm_lookup pwm_lookup[] = { + PWM_LOOKUP("renesas_tpu_pwm", 2, "pwm-backlight.0", NULL), +}; + +/* LCDC and backlight */ +static struct platform_pwm_backlight_data pwm_backlight_data = { + .lth_brightness = 50, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 33333, /* 30kHz */ +}; + +static struct platform_device pwm_backlight_device = { + .name = "pwm-backlight", + .dev = { + .platform_data = &pwm_backlight_data, + }, +}; + static struct fb_videomode lcdc0_mode = { .name = "AMPIER/AM-800480", .xres = 800, @@ -1029,6 +1075,8 @@ static struct i2c_board_info i2c2_devices[] = { */ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, + &pwm_device, + &pwm_backlight_device, &gpio_keys_device, &sh_eth_device, &vcc_sdhi0, @@ -1100,6 +1148,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = { /* ST1232 */ PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740", "intc_irq10", "intc"), + /* TPU0 */ + PIN_MAP_MUX_GROUP_DEFAULT("renesas_tpu_pwm", "pfc-r8a7740", + "tpu0_to2_1", "tpu0"), /* USBHS */ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740", "intc_irq7_1", "intc"), @@ -1153,13 +1204,13 @@ static void __init eva_init(void) ARRAY_SIZE(fixed3v3_power_consumers), 3300000); pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); r8a7740_pinmux_init(); r8a7740_meram_workaround(); /* LCDC0 */ gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ - gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/