Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754246Ab3FLUCK (ORCPT ); Wed, 12 Jun 2013 16:02:10 -0400 Received: from mail-oa0-f49.google.com ([209.85.219.49]:46655 "EHLO mail-oa0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751237Ab3FLUCI convert rfc822-to-8bit (ORCPT ); Wed, 12 Jun 2013 16:02:08 -0400 MIME-Version: 1.0 In-Reply-To: <20130612194346.GD15200@redhat.com> References: <20130612194346.GD15200@redhat.com> Date: Wed, 12 Jun 2013 16:02:07 -0400 X-Google-Sender-Auth: 5JdRA711fvkX3xwhnBQECx_qeyw Message-ID: Subject: Re: WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup. From: Ilia Mirkin To: Dave Jones , Linux Kernel , "linux-scsi@vger.kernel.org" Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3473 Lines: 68 On Wed, Jun 12, 2013 at 3:43 PM, Dave Jones wrote: > 3.10 seems to have a problem with dirty RAID5 sets. > > I've got a machine that panics on boot during RAID5 activation. > After switching the BUG_ON to a WARN_ON, I was able to get this over serial console.. > > md/raid:md0: not clean -- starting background reconstruction > md/raid:md0: device sdd1 operational as raid disk 2 > md/raid:md0: device sdc1 operational as raid disk 1 > md/raid:md0: device sdb1 operational as raid disk 0 > md/raid:md0: allocated 3300kB > md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2 > md0: detected capacity change from 0 to 499847790592 > md: resync of RAID array md0 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. > md: using 128k window, over a total of 244066304k. > md: resuming resync of md0 from checkpoint. > WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd+0xa3/0xb0() > Modules linked in: raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx kvm_amd xor kvm snd_hda_codec_realtek raid6_pq snd_hda_intel snd_hda_codec btusb microcode snd_pcm bluetooth edac_core pcspkr serio_raw snd_page_alloc snd_timer snd soundcore rfkill r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm > CPU: 1 PID: 160 Comm: kworker/1:1H Not tainted 3.10.0-rc5+ #2 > Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 > Workqueue: kblockd blk_delay_work > ffffffff81a4499d ffff8801225f5bb8 ffffffff816aeb63 ffff8801225f5bf0 > ffffffff810432b0 ffff880123039148 ffff8801233e8b00 ffff8801225f5fd8 > ffff880123039148 ffff880123071290 ffff8801225f5c00 ffffffff8104339a > Call Trace: > [] dump_stack+0x19/0x1b > [] warn_slowpath_common+0x70/0xa0 > [] warn_slowpath_null+0x1a/0x20 > [] scsi_setup_fs_cmnd+0xa3/0xb0 > [] sd_prep_fn+0x330/0xf60 > [] blk_peek_request+0x13c/0x320 > [] scsi_request_fn+0x52/0x540 > [] ? blk_delay_work+0x19/0x40 > [] __blk_run_queue+0x32/0x40 > [] blk_delay_work+0x25/0x40 > [] process_one_work+0x211/0x6f0 > [] ? process_one_work+0x1a5/0x6f0 > [] worker_thread+0x11c/0x390 > [] ? process_one_work+0x6f0/0x6f0 > [] kthread+0xed/0x100 > [] ? insert_kthread_work+0x80/0x80 > [] ret_from_fork+0x7c/0xb0 > [] ? insert_kthread_work+0x80/0x80 > ---[ end trace 22d5bd5ee9fceb9e ]--- > > > 3.9 boots fine, and puts it into recovery mode.. > > $ cat /proc/mdstat > Personalities : [raid6] [raid5] [raid4] > md0 : active raid5 sdd1[2] sdb1[0] sdc1[1] > 488132608 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] > [>....................] resync = 0.7% (1762712/244066304) finish=73.3min speed=55084K/sec > > unused devices: > I had the same problem... I think you're looking for this patch: https://lkml.org/lkml/2013/5/19/75 -ilia -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/