Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755702Ab3FPUzF (ORCPT ); Sun, 16 Jun 2013 16:55:05 -0400 Received: from mail-bk0-f48.google.com ([209.85.214.48]:48703 "EHLO mail-bk0-f48.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755522Ab3FPUzA (ORCPT ); Sun, 16 Jun 2013 16:55:00 -0400 From: Tomasz Figa To: linux-samsung-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, alsa-devel@alsa-project.org, Kukjin Kim , Vinod Koul , Dan Williams , Linus Walleij , Alessandro Rubini , Giancarlo Asnaghi , Mark Brown , Grant Likely , Sangbeom Kim , Liam Girdwood , Jaroslav Kysela , Takashi Iwai , Padmavathi Venna , Thomas Abraham , Arnd Bergmann , Olof Johansson , =?UTF-8?q?Heiko=20St=C3=BCbner?= , Sylwester Nawrocki , Russell King - ARM Linux , Alban Bedel , Tomasz Figa Subject: [RFC PATCH 11/11] ARM: s3c64xx: Add support for DMA using generic amba-pl08x driver Date: Sun, 16 Jun 2013 22:54:18 +0200 Message-Id: <1371416058-22047-12-git-send-email-tomasz.figa@gmail.com> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1371416058-22047-1-git-send-email-tomasz.figa@gmail.com> References: <1371416058-22047-1-git-send-email-tomasz.figa@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11394 Lines: 418 This patch adds all required platform-specific data and initialization code to support the generic amba-pl08x driver on S3C64xx SoCs. Also some compatibility definitions are added to make the transition from legacy API to DMA engine easier. The biggest hack here is passing const char * pointers through DMA resource, casted to unsigned long, but this is how Samsung DMA wrappers (used to support both s3c-dma and DMA engine in drivers) is designed. Signed-off-by: Tomasz Figa --- arch/arm/Kconfig | 1 + arch/arm/mach-s3c64xx/Kconfig | 8 +- arch/arm/mach-s3c64xx/Makefile | 1 + arch/arm/mach-s3c64xx/common.h | 5 + arch/arm/mach-s3c64xx/include/mach/dma.h | 65 ++++++++ arch/arm/mach-s3c64xx/pl080.c | 244 +++++++++++++++++++++++++++++++ 6 files changed, 323 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-s3c64xx/pl080.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 42d6ea2..fab8f3c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -714,6 +714,7 @@ config ARCH_S3C64XX bool "Samsung S3C64XX" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP select CLKSRC_MMIO diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 2057853..704c5e4 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -28,9 +28,15 @@ config CPU_S3C6410 help Enable S3C6410 CPU support +config S3C64XX_PL080 + bool "S3C64XX DMA using generic PL08x driver" + select AMBA_PL08X + select SAMSUNG_DMADEV + config S3C64XX_DMA - bool "S3C64XX DMA" + bool "S3C64XX DMA using legacy S3C DMA API" select S3C_DMA + depends on !S3C64XX_PL080 config S3C64XX_SETUP_SDHCI bool diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 31d0c91..4e3326a 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support obj-$(CONFIG_S3C64XX_DMA) += dma.o +obj-$(CONFIG_S3C64XX_PL080) += pl080.o # Device support diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 6cfc99b..60a667a 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void); static inline int s3c64xx_pm_late_initcall(void) { return 0; } #endif +#ifdef CONFIG_S3C64XX_PL080 +extern struct pl08x_platform_data s3c64xx_dma0_plat_data; +extern struct pl08x_platform_data s3c64xx_dma1_plat_data; +#endif + #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98c..6f88965 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ +#ifdef CONFIG_S3C64XX_DMA + #define S3C_DMA_CHANNELS (16) /* see mach-s3c2410/dma.h for notes on dma channel numbers */ @@ -128,4 +130,67 @@ struct s3c2410_dma_chan { #include +#else + +#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) + +/* DMA0/SDMA0 */ +#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") +#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") +#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") +#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") +#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") +#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") +#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") +#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") +#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") +#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") +#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") +#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") +#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") +#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") +#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") + +/* DMA1/SDMA1 */ +#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") +#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") +#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") +#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") +#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") +#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") +#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") +#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") +#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") +#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") +#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") +#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") +#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") + +enum dma_ch { + DMACH_MAX = 32 +}; + +struct s3c2410_dma_client { + char *name; +}; + +static inline bool samsung_dma_has_circular(void) +{ + return true; +} + +static inline bool samsung_dma_is_dmadev(void) +{ + return true; +} + +#define pl330_filter pl08x_filter_id + +#include +#include + +#endif + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c new file mode 100644 index 0000000..734b79f --- /dev/null +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -0,0 +1,244 @@ +/* + * Samsung's S3C64XX generic DMA support using amba-pl08x driver. + * + * Copyright (c) 2013 Tomasz Figa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "regs-sys.h" + +static int pl08x_get_signal(const struct pl08x_channel_data *cd) +{ + return cd->min_signal; +} + +static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch) +{ +} + +/* + * DMA0 + */ + +static struct pl08x_channel_data s3c64xx_dma0_info[] = { + { + .bus_id = "uart0_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart0_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_tx", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_rx", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_tx", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_rx", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_tx", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_rx", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_tx", + .min_signal = 12, + .max_signal = 12, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_rx", + .min_signal = 13, + .max_signal = 13, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_tx", + .min_signal = 14, + .max_signal = 14, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_rx", + .min_signal = 15, + .max_signal = 15, + .periph_buses = PL08X_AHB2, + } +}; + +struct pl08x_platform_data s3c64xx_dma0_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl08x_get_signal, + .put_signal = pl08x_put_signal, + .slave_channels = s3c64xx_dma0_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0x0a141080, + 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data); + +/* + * DMA1 + */ + +static struct pl08x_channel_data s3c64xx_dma1_info[] = { + { + .bus_id = "pcm1_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm1_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_out", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_in", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_mic", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pwm", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "irda", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "external", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data s3c64xx_dma1_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl08x_get_signal, + .put_signal = pl08x_put_signal, + .slave_channels = s3c64xx_dma1_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0x0a141080, + 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data); + +static int __init s3c64xx_pl080_init(void) +{ + /* Set all DMA configuration to be DMA, not SDMA */ + writel(0xffffff, S3C64XX_SDMA_SEL); + + if (of_have_populated_dt()) + return 0; + + amba_device_register(&s3c64xx_dma0_device, &iomem_resource); + amba_device_register(&s3c64xx_dma1_device, &iomem_resource); + + return 0; +} +arch_initcall(s3c64xx_pl080_init); -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/