Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1423031Ab3FUO0d (ORCPT ); Fri, 21 Jun 2013 10:26:33 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:35919 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422679Ab3FUO0b (ORCPT ); Fri, 21 Jun 2013 10:26:31 -0400 Message-ID: <51C4628B.1030507@ti.com> Date: Fri, 21 Jun 2013 10:26:19 -0400 From: Eduardo Valentin User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130510 Thunderbird/17.0.6 MIME-Version: 1.0 To: amit daniel kachhap CC: Eduardo Valentin , , Zhang Rui , , , Kukjin Kim , Subject: Re: [PATCH V6 09/30] thermal: exynos: Add extra entries in the tmu platform data References: <1371451599-31035-1-git-send-email-amit.daniel@samsung.com> <1371451599-31035-10-git-send-email-amit.daniel@samsung.com> <51C2125C.80402@ti.com> <51C21A0B.3080705@ti.com> In-Reply-To: X-Enigmail-Version: 1.5.1 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="----enig2ODVDFQFUNLXOSWSMTXMP" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15896 Lines: 432 ------enig2ODVDFQFUNLXOSWSMTXMP Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 21-06-2013 04:50, amit daniel kachhap wrote: > Hi, >=20 > On Thu, Jun 20, 2013 at 2:22 AM, Eduardo Valentin > wrote: >> On 19-06-2013 16:19, Eduardo Valentin wrote: >>> On 17-06-2013 02:46, Amit Daniel Kachhap wrote: >>>> This patch adds entries min_efuse_value, max_efuse_value, default_te= mp_offset, >>>> trigger_type, cal_type, trim_first_point, trim_second_point, max_tri= gger_level >>>> trigger_enable in the TMU platform data structure. Also the driver i= s modified >>>> to use the data passed by these new platform memebers instead of the= constant >>>> macros. All these changes helps in separating the SOC specific data = part from >>>> the TMU driver. >>>> >>>> Acked-by: Kukjin Kim >>>> Acked-by: Jonghwa Lee >>>> Signed-off-by: Amit Daniel Kachhap >>>> --- >>>> drivers/thermal/samsung/exynos_thermal_common.h | 7 +++ >>>> drivers/thermal/samsung/exynos_tmu.c | 43 ++++++++++--= -------- >>>> drivers/thermal/samsung/exynos_tmu.h | 49 ++++++++++++= ++-------- >>>> drivers/thermal/samsung/exynos_tmu_data.c | 35 ++++++++++++= ---- >>>> 4 files changed, 86 insertions(+), 48 deletions(-) >>>> >>>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drive= rs/thermal/samsung/exynos_thermal_common.h >>>> index 068f56c..fd789a5 100644 >>>> --- a/drivers/thermal/samsung/exynos_thermal_common.h >>>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h >>>> @@ -44,6 +44,13 @@ >>>> >>>> #define EXYNOS_ZONE_COUNT 3 >>>> >>>> +enum trigger_type { >>>> + THROTTLE_ACTIVE =3D 1, >>>> + THROTTLE_PASSIVE, >>>> + SW_TRIP, >>>> + HW_TRIP, >>>> +}; >>>> + >>>> /** >>>> * struct freq_clip_table >>>> * @freq_clip_max: maximum frequency allowed for this cooling state= =2E >>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/= samsung/exynos_tmu.c >>>> index fa33a48..401ec98 100644 >>>> --- a/drivers/thermal/samsung/exynos_tmu.c >>>> +++ b/drivers/thermal/samsung/exynos_tmu.c >>>> @@ -49,7 +49,6 @@ >>>> #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf >>>> #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 >>>> #define EXYNOS_TMU_CORE_EN_SHIFT 0 >>>> -#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50 >>>> >>>> /* Exynos4210 specific registers */ >>>> #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 >>>> @@ -94,9 +93,6 @@ >>>> #define EXYNOS_TMU_INTEN_FALL1_SHIFT 20 >>>> #define EXYNOS_TMU_INTEN_FALL2_SHIFT 24 >>>> >>>> -#define EFUSE_MIN_VALUE 40 >>>> -#define EFUSE_MAX_VALUE 100 >>>> - >>>> #ifdef CONFIG_THERMAL_EMULATION >>>> #define EXYNOS_EMUL_TIME 0x57F0 >>>> #define EXYNOS_EMUL_TIME_MASK 0xffff >>>> @@ -136,15 +132,16 @@ static int temp_to_code(struct exynos_tmu_data= *data, u8 temp) >>>> >>>> switch (pdata->cal_type) { >>>> case TYPE_TWO_POINT_TRIMMING: >>>> - temp_code =3D (temp - 25) * >>>> - (data->temp_error2 - data->temp_error1) / >>>> - (85 - 25) + data->temp_error1; >>>> + temp_code =3D (temp - pdata->first_point_trim) * >>>> + (data->temp_error2 - data->temp_error1) / >>>> + (pdata->second_point_trim - pdata->first_point_= trim) + >>>> + data->temp_error1; >>>> break; >>>> case TYPE_ONE_POINT_TRIMMING: >>>> - temp_code =3D temp + data->temp_error1 - 25; >>>> + temp_code =3D temp + data->temp_error1 - pdata->first_p= oint_trim; >>>> break; >>>> default: >>>> - temp_code =3D temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET= ; >>>> + temp_code =3D temp + pdata->default_temp_offset; >>>> break; >>>> } >>>> out: >>>> @@ -169,14 +166,16 @@ static int code_to_temp(struct exynos_tmu_data= *data, u8 temp_code) >>>> >>>> switch (pdata->cal_type) { >>>> case TYPE_TWO_POINT_TRIMMING: >>>> - temp =3D (temp_code - data->temp_error1) * (85 - 25) / >>>> - (data->temp_error2 - data->temp_error1) + 25; >>>> + temp =3D (temp_code - data->temp_error1) * >>>> + (pdata->second_point_trim - pdata->first_point_= trim) / >>>> + (data->temp_error2 - data->temp_error1) + >>>> + pdata->first_point_trim; >>>> break; >>>> case TYPE_ONE_POINT_TRIMMING: >>>> - temp =3D temp_code - data->temp_error1 + 25; >>>> + temp =3D temp_code - data->temp_error1 + pdata->first_p= oint_trim; >>>> break; >>>> default: >>>> - temp =3D temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET= ; >>>> + temp =3D temp_code - pdata->default_temp_offset; >>>> break; >>>> } >>>> out: >>>> @@ -209,8 +208,8 @@ static int exynos_tmu_initialize(struct platform= _device *pdev) >>>> data->temp_error1 =3D trim_info & EXYNOS_TMU_TRIM_TEMP_MASK; >>>> data->temp_error2 =3D ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_= MASK); >>>> >>>> - if ((EFUSE_MIN_VALUE > data->temp_error1) || >>>> - (data->temp_error1 > EFUSE_MAX_VALUE) || >>>> + if ((pdata->min_efuse_value > data->temp_error1) || >>>> + (data->temp_error1 > pdata->max_efuse_value) ||= >>>> (data->temp_error2 !=3D 0)) >>>> data->temp_error1 =3D pdata->efuse_value; >>>> >>>> @@ -300,10 +299,10 @@ static void exynos_tmu_control(struct platform= _device *pdev, bool on) >>>> if (on) { >>>> con |=3D (1 << EXYNOS_TMU_CORE_EN_SHIFT); >>>> interrupt_en =3D >>>> - pdata->trigger_level3_en << EXYNOS_TMU_INTEN_RISE3_SHIF= T | >>>> - pdata->trigger_level2_en << EXYNOS_TMU_INTEN_RISE2_SHIF= T | >>>> - pdata->trigger_level1_en << EXYNOS_TMU_INTEN_RISE1_SHIF= T | >>>> - pdata->trigger_level0_en << EXYNOS_TMU_INTEN_RISE0_SHIF= T; >>>> + pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIF= T | >>>> + pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIF= T | >>>> + pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIF= T | >>>> + pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIF= T; >>>> if (pdata->threshold_falling) >>>> interrupt_en |=3D >>>> interrupt_en << EXYNOS_TMU_INTEN_FALL0_= SHIFT; >>>> @@ -533,9 +532,9 @@ static int exynos_tmu_probe(struct platform_devi= ce *pdev) >>>> >>>> /* Register the sensor with thermal management interface */ >>>> (&exynos_sensor_conf)->private_data =3D data; >>>> - exynos_sensor_conf.trip_data.trip_count =3D pdata->trigger_leve= l0_en + >>>> - pdata->trigger_level1_en + pdata->trigger_level= 2_en + >>>> - pdata->trigger_level3_en; >>>> + exynos_sensor_conf.trip_data.trip_count =3D pdata->trigger_enab= le[0] + >>>> + pdata->trigger_enable[1] + pdata->trigger_enabl= e[2]+ >>>> + pdata->trigger_enable[3]; >>>> >>>> for (i =3D 0; i < exynos_sensor_conf.trip_data.trip_count; i++)= >>>> exynos_sensor_conf.trip_data.trip_val[i] =3D >>>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/= samsung/exynos_tmu.h >>>> index 9e0f887..45c697d 100644 >>>> --- a/drivers/thermal/samsung/exynos_tmu.h >>>> +++ b/drivers/thermal/samsung/exynos_tmu.h >>>> @@ -30,6 +30,11 @@ enum calibration_type { >>>> TYPE_NONE, >>>> }; >>>> >>>> +enum calibration_mode { >>>> + SW_MODE, >>>> + HW_MODE, >>>> +}; >>>> + >>>> enum soc_type { >>>> SOC_ARCH_EXYNOS4210 =3D 1, >>>> SOC_ARCH_EXYNOS, >>>> @@ -55,18 +60,15 @@ enum soc_type { >>>> * 3: temperature for trigger_level3 interrupt >>>> * condition for trigger_level3 interrupt: >>>> * current temperature > threshold + trigger_levels[3] >>>> - * @trigger_level0_en: >>>> - * 1 =3D enable trigger_level0 interrupt, >>>> - * 0 =3D disable trigger_level0 interrupt >>>> - * @trigger_level1_en: >>>> - * 1 =3D enable trigger_level1 interrupt, >>>> - * 0 =3D disable trigger_level1 interrupt >>>> - * @trigger_level2_en: >>>> - * 1 =3D enable trigger_level2 interrupt, >>>> - * 0 =3D disable trigger_level2 interrupt >>>> - * @trigger_level3_en: >>>> - * 1 =3D enable trigger_level3 interrupt, >>>> - * 0 =3D disable trigger_level3 interrupt >>>> + * @trigger_type: defines the type of trigger. Possible values are,= >>>> + * THROTTLE_ACTIVE trigger type >>>> + * THROTTLE_PASSIVE trigger type >>>> + * SW_TRIP trigger type >>>> + * HW_TRIP >>>> + * @trigger_enable[]: array to denote which trigger levels are enab= led. >>>> + * 1 =3D enable trigger_level[] interrupt, >>>> + * 0 =3D disable trigger_level[] interrupt >>>> + * @max_trigger_level: max trigger level supported by the TMU >>>> * @gain: gain of amplifier in the positive-TC generator block >>>> * 0 <=3D gain <=3D 15 >>>> * @reference_voltage: reference voltage of amplifier >>>> @@ -76,7 +78,13 @@ enum soc_type { >>>> * 000, 100, 101, 110 and 111 can be different modes >>>> * @type: determines the type of SOC >>>> * @efuse_value: platform defined fuse value >>>> + * @min_efuse_value: minimum valid trimming data >>>> + * @max_efuse_value: maximum valid trimming data >>>> + * @first_point_trim: temp value of the first point trimming >>>> + * @second_point_trim: temp value of the second point trimming >>>> + * @default_temp_offset: default temperature offset in case of no t= rimming >>>> * @cal_type: calibration type for temperature >>>> + * @cal_mode: calibration mode for temperature >>>> * @freq_clip_table: Table representing frequency reduction percent= age. >>>> * @freq_tab_count: Count of the above table as frequency reduction= may >>>> * applicable to only some of the trigger levels. >>>> @@ -86,18 +94,23 @@ enum soc_type { >>>> struct exynos_tmu_platform_data { >>>> u8 threshold; >>>> u8 threshold_falling; >>>> - u8 trigger_levels[4]; >>>> - bool trigger_level0_en; >>>> - bool trigger_level1_en; >>>> - bool trigger_level2_en; >>>> - bool trigger_level3_en; >>>> - >>>> + u8 trigger_levels[MAX_TRIP_COUNT]; >>>> + enum trigger_type trigger_type[MAX_TRIP_COUNT]; >>>> + bool trigger_enable[MAX_TRIP_COUNT]; >>>> + u8 max_trigger_level; >>>> u8 gain; >>>> u8 reference_voltage; >>>> u8 noise_cancel_mode; >>>> + >>>> u32 efuse_value; >>>> + u32 min_efuse_value; >>>> + u32 max_efuse_value; >>>> + u8 first_point_trim; >>>> + u8 second_point_trim; >>>> + u8 default_temp_offset; >>>> >>>> enum calibration_type cal_type; >>>> + enum calibration_mode cal_mode; >>>> enum soc_type type; >>>> struct freq_clip_table freq_tab[4]; >>>> unsigned int freq_tab_count; >>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/the= rmal/samsung/exynos_tmu_data.c >>>> index 13a60ca..a187043 100644 >>>> --- a/drivers/thermal/samsung/exynos_tmu_data.c >>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c >>>> @@ -22,6 +22,7 @@ >>>> >>>> #include "exynos_thermal_common.h" >>>> #include "exynos_tmu.h" >>>> +#include "exynos_tmu_data.h" >>> >>> This change needs to be moved to the patch that you added this file. >>> Check comment on patch 07/30. >>>> >>>> #if defined(CONFIG_CPU_EXYNOS4210) >>>> struct exynos_tmu_platform_data const exynos4210_default_tmu_data =3D= { >>>> @@ -29,13 +30,22 @@ struct exynos_tmu_platform_data const exynos4210= _default_tmu_data =3D { >>>> .trigger_levels[0] =3D 5, >>>> .trigger_levels[1] =3D 20, >>>> .trigger_levels[2] =3D 30, >>>> - .trigger_level0_en =3D 1, >>>> - .trigger_level1_en =3D 1, >>>> - .trigger_level2_en =3D 1, >>>> - .trigger_level3_en =3D 0, >>>> + .trigger_enable[0] =3D 1, >>>> + .trigger_enable[1] =3D 1, >>>> + .trigger_enable[2] =3D 1, >>>> + .trigger_enable[3] =3D 0, >> >> This change added this sparse warning on your driver: >> drivers/thermal/samsung/exynos_tmu_data.c:34:10: warning: Initializer >> entry defined twice >> drivers/thermal/samsung/exynos_tmu_data.c:35:10: also defined here > It seems sparse tool has some issue in bool assignment checkinh and it > is not fixed yet. > http://lkml.indiana.edu/hypermail/linux/kernel/1005.0/02153.html > so leaving it as of now. OK. Looks like in the latter part of your series you change the code to use macros. sparse then will not see this. Talking about bool, don't you want to use true/false instead of 1/0, for clarity? >=20 > Thanks, > Amit D >> >> >>>> + .trigger_type[0] =3D THROTTLE_ACTIVE, >>>> + .trigger_type[1] =3D THROTTLE_ACTIVE, >>>> + .trigger_type[2] =3D SW_TRIP, >>> >>> is there any issues if trigger_type[3] is 0? there is no defined valu= e >>> for 0. (0 means undefined on your enum definition). >>> >>> >>>> + .max_trigger_level =3D 4, >>>> .gain =3D 15, >>>> .reference_voltage =3D 7, >>>> .cal_type =3D TYPE_ONE_POINT_TRIMMING, >>>> + .min_efuse_value =3D 40, >>>> + .max_efuse_value =3D 100, >>>> + .first_point_trim =3D 25, >>>> + .second_point_trim =3D 85, >>>> + .default_temp_offset =3D 50, >>>> .freq_tab[0] =3D { >>>> .freq_clip_max =3D 800 * 1000, >>>> .temp_level =3D 85, >>>> @@ -55,15 +65,24 @@ struct exynos_tmu_platform_data const exynos5250= _default_tmu_data =3D { >>>> .trigger_levels[0] =3D 85, >>>> .trigger_levels[1] =3D 103, >>>> .trigger_levels[2] =3D 110, >>>> - .trigger_level0_en =3D 1, >>>> - .trigger_level1_en =3D 1, >>>> - .trigger_level2_en =3D 1, >>>> - .trigger_level3_en =3D 0, >>>> + .trigger_enable[0] =3D 1, >>>> + .trigger_enable[1] =3D 1, >>>> + .trigger_enable[2] =3D 1, >>>> + .trigger_enable[3] =3D 0, >> >> >> This change add this sparse warning on your driver: >> drivers/thermal/samsung/exynos_tmu_data.c:69:10: warning: Initializer >> entry defined twice >> drivers/thermal/samsung/exynos_tmu_data.c:70:10: also defined here >> >> >>>> + .trigger_type[0] =3D THROTTLE_ACTIVE, >>>> + .trigger_type[1] =3D THROTTLE_ACTIVE, >>>> + .trigger_type[2] =3D SW_TRIP, >>>> + .max_trigger_level =3D 4, >>>> .gain =3D 8, >>>> .reference_voltage =3D 16, >>>> .noise_cancel_mode =3D 4, >>>> .cal_type =3D TYPE_ONE_POINT_TRIMMING, >>>> .efuse_value =3D 55, >>>> + .min_efuse_value =3D 40, >>>> + .max_efuse_value =3D 100, >>>> + .first_point_trim =3D 25, >>>> + .second_point_trim =3D 85, >>>> + .default_temp_offset =3D 50, >>>> .freq_tab[0] =3D { >>>> .freq_clip_max =3D 800 * 1000, >>>> .temp_level =3D 85, >>>> >>> >>> >> >> >> -- >> You have got to be excited about what you are doing. (L. Lamport) >> >> Eduardo Valentin >> >=20 >=20 --=20 You have got to be excited about what you are doing. (L. Lamport) Eduardo Valentin ------enig2ODVDFQFUNLXOSWSMTXMP Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iF4EAREIAAYFAlHEYosACgkQCXcVR3XQvP20SgD7Bt8sfUvtnB3nsDhk2ztVHRrb lFTpjQW3FdCGNryX/+cBANz9fYK+p6UlPMK6pDlqmBMasZcGxZQUORTMRR7W3y1M =RReb -----END PGP SIGNATURE----- ------enig2ODVDFQFUNLXOSWSMTXMP-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/