Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752838Ab3FXP2q (ORCPT ); Mon, 24 Jun 2013 11:28:46 -0400 Received: from ns.mm-sol.com ([212.124.72.66]:60562 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751377Ab3FXP2n (ORCPT ); Mon, 24 Jun 2013 11:28:43 -0400 From: "Ivan T. Ivanov" To: linux-arm-msm@vger.kernel.org Cc: "Ivan T. Ivanov" , Felipe Balbi , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 7/7] usb: phy: msm: Lindent the code Date: Mon, 24 Jun 2013 18:27:44 +0300 Message-Id: <1372087664-26396-8-git-send-email-iivanov@mm-sol.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1372087664-26396-1-git-send-email-iivanov@mm-sol.com> References: <1372087664-26396-1-git-send-email-iivanov@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11688 Lines: 333 From: "Ivan T. Ivanov" Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ivan T. Ivanov --- drivers/usb/phy/phy-msm-usb.c | 99 ++++++++++++++++++++++------------------- 1 file changed, 52 insertions(+), 47 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 6d05085..111f454 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -45,18 +45,18 @@ #define ULPI_IO_TIMEOUT_USEC (10 * 1000) -#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ -#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ +#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ +#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ #define USB_PHY_3P3_HPM_LOAD 50000 /* uA */ #define USB_PHY_3P3_LPM_LOAD 4000 /* uA */ -#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */ -#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */ +#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */ +#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */ #define USB_PHY_1P8_HPM_LOAD 50000 /* uA */ #define USB_PHY_1P8_LPM_LOAD 4000 /* uA */ -#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ -#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ +#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ +#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) { @@ -64,8 +64,8 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) if (init) { ret = regulator_set_voltage(motg->vddcx, - USB_PHY_VDD_DIG_VOL_MIN, - USB_PHY_VDD_DIG_VOL_MAX); + USB_PHY_VDD_DIG_VOL_MIN, + USB_PHY_VDD_DIG_VOL_MAX); if (ret) { dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); return ret; @@ -73,15 +73,17 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) ret = regulator_enable(motg->vddcx); if (ret) - dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); + dev_err(motg->phy.dev, + "unable to enable hsusb vddcx\n"); } else { ret = regulator_set_voltage(motg->vddcx, 0, - USB_PHY_VDD_DIG_VOL_MAX); + USB_PHY_VDD_DIG_VOL_MAX); if (ret) dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); ret = regulator_disable(motg->vddcx); if (ret) - dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); + dev_err(motg->phy.dev, + "unable to disable hsusb vddcx\n"); } return ret; @@ -93,26 +95,28 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) if (init) { rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN, - USB_PHY_3P3_VOL_MAX); + USB_PHY_3P3_VOL_MAX); if (rc) { dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n"); return rc; } rc = regulator_enable(motg->v3p3); if (rc) { - dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n"); + dev_err(motg->phy.dev, + "unable to enable the hsusb 3p3\n"); return rc; } rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN, - USB_PHY_1P8_VOL_MAX); + USB_PHY_1P8_VOL_MAX); if (rc) { dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n"); goto disable_3p3; } rc = regulator_enable(motg->v1p8); if (rc) { - dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n"); + dev_err(motg->phy.dev, + "unable to enable the hsusb 1p8\n"); goto disable_3p3; } @@ -156,26 +160,26 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) if (on) { ret = regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_HPM_LOAD); + USB_PHY_1P8_HPM_LOAD); if (ret < 0) { pr_err("Could not set HPM for v1p8\n"); return ret; } ret = regulator_set_optimum_mode(motg->v3p3, - USB_PHY_3P3_HPM_LOAD); + USB_PHY_3P3_HPM_LOAD); if (ret < 0) { pr_err("Could not set HPM for v3p3\n"); regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_LPM_LOAD); + USB_PHY_1P8_LPM_LOAD); return ret; } } else { ret = regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_LPM_LOAD); + USB_PHY_1P8_LPM_LOAD); if (ret < 0) pr_err("Could not set LPM for v1p8\n"); ret = regulator_set_optimum_mode(motg->v3p3, - USB_PHY_3P3_LPM_LOAD); + USB_PHY_3P3_LPM_LOAD); if (ret < 0) pr_err("Could not set LPM for v3p3\n"); } @@ -190,8 +194,7 @@ static int ulpi_read(struct usb_phy *phy, u32 reg) int cnt = 0; /* initiate read operation */ - writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), - USB_ULPI_VIEWPORT); + writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), USB_ULPI_VIEWPORT); /* wait for completion */ while (cnt < ULPI_IO_TIMEOUT_USEC) { @@ -216,8 +219,7 @@ static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg) /* initiate write operation */ writel(ULPI_RUN | ULPI_WRITE | - ULPI_ADDR(reg) | ULPI_DATA(val), - USB_ULPI_VIEWPORT); + ULPI_ADDR(reg) | ULPI_DATA(val), USB_ULPI_VIEWPORT); /* wait for completion */ while (cnt < ULPI_IO_TIMEOUT_USEC) { @@ -249,7 +251,7 @@ static void ulpi_init(struct msm_otg *motg) while (seq[0] >= 0) { dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n", - seq[0], seq[1]); + seq[0], seq[1]); ulpi_write(&motg->phy, seq[0], seq[1]); seq += 2; } @@ -277,7 +279,7 @@ static int msm_otg_phy_reset(struct msm_otg *motg) for (retries = 3; retries > 0; retries--) { ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, - ULPI_CLR(ULPI_FUNC_CTRL)); + ULPI_CLR(ULPI_FUNC_CTRL)); if (!ret) break; ret = pdata->phy_clk_reset(motg->phy_reset_clk); @@ -429,7 +431,7 @@ static int msm_otg_suspend(struct msm_otg *motg) writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD); if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && - motg->pdata->otg_control == OTG_PMIC_CONTROL) + motg->pdata->otg_control == OTG_PMIC_CONTROL) writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL); clk_disable_unprepare(motg->pclk); @@ -441,7 +443,7 @@ static int msm_otg_suspend(struct msm_otg *motg) clk_disable_unprepare(motg->pclk_src); if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && - motg->pdata->otg_control == OTG_PMIC_CONTROL) { + motg->pdata->otg_control == OTG_PMIC_CONTROL) { msm_hsusb_ldo_set_mode(motg, 0); msm_hsusb_config_vddcx(motg, 0); } @@ -478,7 +480,7 @@ static int msm_otg_resume(struct msm_otg *motg) clk_prepare_enable(motg->core_clk); if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && - motg->pdata->otg_control == OTG_PMIC_CONTROL) { + motg->pdata->otg_control == OTG_PMIC_CONTROL) { msm_hsusb_ldo_set_mode(motg, 1); msm_hsusb_config_vddcx(motg, 1); writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL); @@ -510,7 +512,8 @@ static int msm_otg_resume(struct msm_otg *motg) * PHY. USB state can not be restored. Re-insertion * of USB cable is the only way to get USB working. */ - dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n"); + dev_err(phy->dev, + "Unable to resume USB. Re-plugin the cable\n"); msm_otg_reset(phy); } @@ -674,7 +677,7 @@ static void msm_otg_start_peripheral(struct usb_phy *phy, int on) } static int msm_otg_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) + struct usb_gadget *gadget) { struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); @@ -948,10 +951,10 @@ static void msm_chg_block_off(struct msm_otg *motg) ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); } -#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */ -#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */ -#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */ -#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */ +#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */ +#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */ +#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */ +#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */ static void msm_chg_detect_work(struct work_struct *w) { struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work); @@ -1094,20 +1097,20 @@ static void msm_otg_sm_work(struct work_struct *w) switch (motg->chg_type) { case USB_DCP_CHARGER: msm_otg_notify_charger(motg, - IDEV_CHG_MAX); + IDEV_CHG_MAX); break; case USB_CDP_CHARGER: msm_otg_notify_charger(motg, - IDEV_CHG_MAX); + IDEV_CHG_MAX); msm_otg_start_peripheral(otg->phy, 1); otg->phy->state - = OTG_STATE_B_PERIPHERAL; + = OTG_STATE_B_PERIPHERAL; break; case USB_SDP_CHARGER: msm_otg_notify_charger(motg, IUNIT); msm_otg_start_peripheral(otg->phy, 1); otg->phy->state - = OTG_STATE_B_PERIPHERAL; + = OTG_STATE_B_PERIPHERAL; break; default: break; @@ -1135,7 +1138,7 @@ static void msm_otg_sm_work(struct work_struct *w) case OTG_STATE_B_PERIPHERAL: dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n"); if (!test_bit(B_SESS_VLD, &motg->inputs) || - !test_bit(ID, &motg->inputs)) { + !test_bit(ID, &motg->inputs)) { msm_otg_notify_charger(motg, 0); msm_otg_start_peripheral(otg->phy, 0); motg->chg_state = USB_CHG_STATE_UNDEFINED; @@ -1223,7 +1226,7 @@ static int msm_otg_mode_open(struct inode *inode, struct file *file) } static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { struct seq_file *s = file->private_data; struct msm_otg *motg = s->private; @@ -1312,7 +1315,8 @@ static int msm_otg_debugfs_init(struct msm_otg *motg) return -ENODEV; msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR, - msm_otg_dbg_root, motg, &msm_otg_mode_fops); + msm_otg_dbg_root, motg, + &msm_otg_mode_fops); if (!msm_otg_dbg_mode) { debugfs_remove(msm_otg_dbg_root); msm_otg_dbg_root = NULL; @@ -1384,9 +1388,9 @@ static int __init msm_otg_probe(struct platform_device *pdev) * CORE CLK. For such USB cores, vote for maximum clk frequency * on pclk source */ - if (motg->pdata->pclk_src_name) { + if (motg->pdata->pclk_src_name) { motg->pclk_src = devm_clk_get(&pdev->dev, - motg->pdata->pclk_src_name); + motg->pdata->pclk_src_name); if (IS_ERR(motg->pclk_src)) return PTR_ERR(motg->pclk_src); clk_set_rate(motg->pclk_src, INT_MAX); @@ -1475,7 +1479,7 @@ static int __init msm_otg_probe(struct platform_device *pdev) INIT_WORK(&motg->sm_work, msm_otg_sm_work); INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work); ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED, - "msm_otg", motg); + "msm_otg", motg); if (ret) { dev_err(&pdev->dev, "request irq failed\n"); goto disable_clks; @@ -1500,10 +1504,11 @@ static int __init msm_otg_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); if (motg->pdata->mode == USB_OTG && - motg->pdata->otg_control == OTG_USER_CONTROL) { + motg->pdata->otg_control == OTG_USER_CONTROL) { ret = msm_otg_debugfs_init(motg); if (ret) - dev_dbg(&pdev->dev, "Can not create mode change file\n"); + dev_dbg(&pdev->dev, + "Can not create mode change file\n"); } pm_runtime_set_active(&pdev->dev); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/