Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752869Ab3FXP3T (ORCPT ); Mon, 24 Jun 2013 11:29:19 -0400 Received: from ns.mm-sol.com ([212.124.72.66]:60553 "EHLO extserv.mm-sol.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752534Ab3FXP2l (ORCPT ); Mon, 24 Jun 2013 11:28:41 -0400 From: "Ivan T. Ivanov" To: linux-arm-msm@vger.kernel.org Cc: "Ivan T. Ivanov" , Felipe Balbi , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 5/7] usb: phy: msm: Fix WARNING: quoted string split across lines Date: Mon, 24 Jun 2013 18:27:42 +0300 Message-Id: <1372087664-26396-6-git-send-email-iivanov@mm-sol.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1372087664-26396-1-git-send-email-iivanov@mm-sol.com> References: <1372087664-26396-1-git-send-email-iivanov@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4635 Lines: 130 From: "Ivan T. Ivanov" This fixes checkpatch.pl warnings. Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ivan T. Ivanov --- drivers/usb/phy/phy-msm-usb.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 0e7d7ab..41938e6 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -67,8 +67,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) USB_PHY_VDD_DIG_VOL_MIN, USB_PHY_VDD_DIG_VOL_MAX); if (ret) { - dev_err(motg->phy.dev, "unable to set the voltage " - "for hsusb vddcx\n"); + dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); return ret; } @@ -79,8 +78,7 @@ static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) ret = regulator_set_voltage(motg->vddcx, 0, USB_PHY_VDD_DIG_VOL_MAX); if (ret) - dev_err(motg->phy.dev, "unable to set the voltage " - "for hsusb vddcx\n"); + dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); ret = regulator_disable(motg->vddcx); if (ret) dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); @@ -97,8 +95,7 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN, USB_PHY_3P3_VOL_MAX); if (rc) { - dev_err(motg->phy.dev, "unable to set voltage level " - "for hsusb 3p3\n"); + dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n"); return rc; } rc = regulator_enable(motg->v3p3); @@ -110,8 +107,7 @@ static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN, USB_PHY_1P8_VOL_MAX); if (rc) { - dev_err(motg->phy.dev, "unable to set voltage level " - "for hsusb 1p8\n"); + dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n"); goto disable_3p3; } rc = regulator_enable(motg->v1p8); @@ -144,8 +140,7 @@ static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high) ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol); if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); + dev_err(motg->phy.dev, "Cannot set vddcx voltage\n"); return ret; } @@ -163,15 +158,13 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_HPM_LOAD); if (ret < 0) { - pr_err("%s: Unable to set HPM of the regulator " - "HSUSB_1p8\n", __func__); + pr_err("Could not set HPM for v1p8\n"); return ret; } ret = regulator_set_optimum_mode(motg->v3p3, USB_PHY_3P3_HPM_LOAD); if (ret < 0) { - pr_err("%s: Unable to set HPM of the regulator " - "HSUSB_3p3\n", __func__); + pr_err("Could not set HPM for v3p3\n"); regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_LPM_LOAD); return ret; @@ -180,13 +173,11 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_LPM_LOAD); if (ret < 0) - pr_err("%s: Unable to set LPM of the regulator " - "HSUSB_1p8\n", __func__); + pr_err("Could not set LPM for v1p8\n"); ret = regulator_set_optimum_mode(motg->v3p3, USB_PHY_3P3_LPM_LOAD); if (ret < 0) - pr_err("%s: Unable to set LPM of the regulator " - "HSUSB_3p3\n", __func__); + pr_err("Could not set LPM for v3p3\n"); } pr_debug("reg (%s)\n", on ? "HPM" : "LPM"); @@ -519,8 +510,7 @@ static int msm_otg_resume(struct msm_otg *motg) * PHY. USB state can not be restored. Re-insertion * of USB cable is the only way to get USB working. */ - dev_err(phy->dev, "Unable to resume USB." - "Re-plugin the cable\n"); + dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n"); msm_otg_reset(phy); } @@ -1513,8 +1503,7 @@ static int __init msm_otg_probe(struct platform_device *pdev) motg->pdata->otg_control == OTG_USER_CONTROL) { ret = msm_otg_debugfs_init(motg); if (ret) - dev_dbg(&pdev->dev, "mode debugfs file is" - "not available\n"); + dev_dbg(&pdev->dev, "Can not create mode change file\n"); } pm_runtime_set_active(&pdev->dev); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/