Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 6 Oct 2002 01:56:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 6 Oct 2002 01:56:28 -0400 Received: from adsl-64-123-59-158.dsl.stlsmo.swbell.net ([64.123.59.158]:14720 "EHLO base.torri.linux") by vger.kernel.org with ESMTP id ; Sun, 6 Oct 2002 01:56:26 -0400 Subject: ext3 mount failed [2.5.40-ac3] From: Stephen Torri To: Linux Kernel Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.8 (1.0.8-10) Date: 06 Oct 2002 01:01:59 -0500 Message-Id: <1033884119.1125.14.camel@base.torri.linux> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4016 Lines: 132 Here is the clip of the boot message from trying to start 2.5.40-ac3 kernel. gcc-3.2 used. I can do whatever setup and configuration you require. mounting root filesystem request_module[block-major-33]: not ready mount: error 6 mounting ext 3 pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2 unmount /initrd/proc failed: 2 Freeing unused Kernel memory: 176K freed Kernel panic: no init found Kernel config: # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_DEV_RZ1000=y CONFIG_IDEDMA_AUTO=y # # File systems # CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y CONFIG_REISERFS_PROC_INFO=y CONFIG_EXT3_FS=y CONFIG_JBD=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_CRAMFS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_JFS_FS=y CONFIG_JFS_DEBUG=y CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y CONFIG_ROMFS_FS=y CONFIG_EXT2_FS=y CONFIG_UDF_FS=y The system has two IBM HDs, one Seagate and a DVD/CRW. It has a IDE controller on the motherboard and a Promise ATA100 card. Below are the print outs of the devices: (hdparm -i /dev/hda) * /dev/hda1 /mnt/win98 (vfat) * /dev/hda2 /boot (ext3) dev/hda: Model=ST310232A, FwRev=3.09, SerialNo=6BQ032H9 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=20005650 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 AdvancedPM=no WriteCache=enabled Drive conforms to: device does not report version: 1 2 3 4 (hdparm -i /dev/hde) dev/hde: * /dev/hde1 / (root) (ext3) * /dev/hde2 swap (swap) * /dev/hde5 /usr (ext3) * /dev/hde6 /home (ext3) dev/hdf: (same drive as hde) * /dev/hdf1 /usr/src (ext3) * /dev/hdf2 /mnt/misc_1 (ext3) Model=IBM-DTLA-307045, FwRev=TX6OA50C, SerialNo=YMDYMT5M619 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=90069840 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5 (lspci -v) 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 [virtual] I/O ports at 01f0 [virtual] I/O ports at 03f4 [virtual] I/O ports at 0170 [virtual] I/O ports at 0374 I/O ports at ffa0 [size=16] 00:14.0 Unknown mass storage controller: Promise Technology, Inc. 20267 (rev 02) Subsystem: Promise Technology, Inc. Ultra100 Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at efe0 [size=8] I/O ports at efac [size=4] I/O ports at efa0 [size=8] I/O ports at efa8 [size=4] I/O ports at ef00 [size=64] Memory at febe0000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at febd0000 [disabled] [size=64K] Capabilities: [58] Power Management version 1 Stephen Torri storri@sbcglobal.net - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/