Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751274Ab3FZByP (ORCPT ); Tue, 25 Jun 2013 21:54:15 -0400 Received: from mga14.intel.com ([143.182.124.37]:48808 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751444Ab3FZBxl (ORCPT ); Tue, 25 Jun 2013 21:53:41 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.87,940,1363158000"; d="scan'208";a="322608880" From: Darren Hart To: Linux Kernel Mailing List , "H. Peter Anvin" , peter.p.waskiewicz.jr@intel.com, andriy.shevchenko@linux.intel.com, danders@circuitco.com, vishal.l.verma@intel.com, dvhart@linux.intel.com Cc: Matthew Garrett , Grant Likely , Linus Walleij , Richard Purdie , platform-driver-x86@vger.kernel.org Subject: [PATCH 4/8] minnowboard: Add base platform driver for the MinnowBoard Date: Tue, 25 Jun 2013 18:53:24 -0700 Message-Id: X-Mailer: git-send-email 1.8.1.2 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11968 Lines: 404 The MinnowBoard (http://www.minnowboard.org) is an Intel Atom (E6xx) plus EG20T PCH development board. It uses a few GPIO lines for specific purposes and exposes the rest to the user. Request the dedicated GPIO lines: HWID LVDS_DETECT PHY_RESET LED0 LED1 Setup platform drivers for the MinnowBoard LEDs using the leds-gpio driver. Setup led0 and led1 with heartbeat and mmc0 default triggers respectively. GPIO lines SUS[0-4] are dual purpose, either for LVDS signaling or as user GPIO. Determine which via the LVDS_DETECT signal and enable or disable them accordingly. Provide a minimal public interface: minnow_detect() minnow_lvds_detect() minnow_hwid() minnow_phy_reset() Signed-off-by: Darren Hart Cc: Matthew Garrett Cc: Grant Likely Cc: Linus Walleij Cc: Richard Purdie Cc: "H. Peter Anvin" Cc: Peter Waskiewicz Cc: Andy Shevchenko Cc: platform-driver-x86@vger.kernel.org --- drivers/platform/x86/Kconfig | 20 ++++ drivers/platform/x86/Makefile | 1 + drivers/platform/x86/minnowboard-gpio.h | 60 ++++++++++ drivers/platform/x86/minnowboard.c | 193 ++++++++++++++++++++++++++++++++ include/linux/minnowboard.h | 37 ++++++ 5 files changed, 311 insertions(+) create mode 100644 drivers/platform/x86/minnowboard-gpio.h create mode 100644 drivers/platform/x86/minnowboard.c create mode 100644 include/linux/minnowboard.h diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 8577261..154dbf6 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -15,6 +15,26 @@ menuconfig X86_PLATFORM_DEVICES if X86_PLATFORM_DEVICES +config MINNOWBOARD + tristate "MinnowBoard GPIO and LVDS support" + depends on LPC_SCH + depends on GPIO_SCH + depends on GPIO_PCH + depends on LEDS_GPIO + default n + ---help--- + This driver configures the MinnowBoard fixed functionality GPIO lines. + + It ensures that the E6XX SUS GPIOs muxed with LVDS signals (SUS[0:2]) + are disabled if the LVDS_DETECT signal is asserted. + + If LED_TRIGGER* are enabled, LED0 will use the heartbeat trigger and + LED1 will use the mmc0 trigger. + + The Minnow Hardware ID is read from the GPIO HWID lines and logged. + + If you have a MinnowBoard, say Y or M here. + config ACER_WMI tristate "Acer WMI Laptop Extras" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index ef0ec74..45ede1c 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -2,6 +2,7 @@ # Makefile for linux/drivers/platform/x86 # x86 Platform-Specific Drivers # +obj-$(CONFIG_MINNOWBOARD) += minnowboard.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_ASUS_WMI) += asus-wmi.o obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o diff --git a/drivers/platform/x86/minnowboard-gpio.h b/drivers/platform/x86/minnowboard-gpio.h new file mode 100644 index 0000000..ccc8361 --- /dev/null +++ b/drivers/platform/x86/minnowboard-gpio.h @@ -0,0 +1,60 @@ +/* + * MinnowBoard Linux platform driver + * Copyright (c) 2013, Intel Corporation. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Darren Hart + */ + +/* MinnowBoard GPIO definitions */ +#define GPIO_BTN0 0 +#define GPIO_BTN1 1 +#define GPIO_BTN2 2 +#define GPIO_BTN3 3 + +#define GPIO_PROG_VOLTAGE 4 + +/* + * If !LVDS_DETECT, the AUX lines are available as GPIO, + * otherwise they are used for LVDS signals. + */ +#define GPIO_AUX0 5 +#define GPIO_AUX1 6 +#define GPIO_AUX2 7 +#define GPIO_AUX3 8 +#define GPIO_AUX4 9 + +#define GPIO_LED0 10 +#define GPIO_LED1 11 + +#define GPIO_USB_VBUS_DETECT 12 + +#define GPIO_PHY_RESET 13 + +#define GPIO_PCH0 244 +#define GPIO_PCH1 245 +#define GPIO_PCH2 246 +#define GPIO_PCH3 247 +#define GPIO_PCH4 248 +#define GPIO_PCH5 249 +#define GPIO_PCH6 250 +#define GPIO_PCH7 251 + +#define GPIO_HWID0 252 +#define GPIO_HWID1 253 +#define GPIO_HWID2 254 + +#define GPIO_LVDS_DETECT 255 diff --git a/drivers/platform/x86/minnowboard.c b/drivers/platform/x86/minnowboard.c new file mode 100644 index 0000000..73d59c1 --- /dev/null +++ b/drivers/platform/x86/minnowboard.c @@ -0,0 +1,193 @@ +/* + * MinnowBoard Linux platform driver + * Copyright (c) 2013, Intel Corporation. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Darren Hart + */ + +#define pr_fmt(fmt) "MinnowBoard: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "minnowboard-gpio.h" + +static int minnow_hwid_val = -1; + +/* leds-gpio platform device structures */ +static const struct gpio_led minnow_leds[] = { + { .name = "minnow_led0", .gpio = GPIO_LED0, .active_low = 0, + .retain_state_suspended = 1, .default_state = LEDS_GPIO_DEFSTATE_ON, + .default_trigger = "heartbeat"}, + { .name = "minnow_led1", .gpio = GPIO_LED1, .active_low = 0, + .retain_state_suspended = 1, .default_state = LEDS_GPIO_DEFSTATE_ON, + .default_trigger = "mmc0"}, +}; + +static struct gpio_led_platform_data minnow_leds_platform_data = { + .num_leds = ARRAY_SIZE(minnow_leds), + .leds = (void *) minnow_leds, +}; + +static struct platform_device minnow_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &minnow_leds_platform_data, + }, +}; + +static struct gpio hwid_gpios[] = { + { GPIO_HWID0, GPIOF_DIR_IN | GPIOF_EXPORT, "minnow_gpio_hwid0" }, + { GPIO_HWID1, GPIOF_DIR_IN | GPIOF_EXPORT, "minnow_gpio_hwid1" }, + { GPIO_HWID2, GPIOF_DIR_IN | GPIOF_EXPORT, "minnow_gpio_hwid2" }, +}; + +int minnow_hwid(void) +{ + /* This should never be called prior to minnow_init_module() */ + WARN_ON_ONCE(minnow_hwid_val == -1); + return minnow_hwid_val; +} +EXPORT_SYMBOL_GPL(minnow_hwid); + +bool minnow_detect(void) +{ + const char *cmp; + + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && strstr(cmp, "MinnowBoard")) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(minnow_detect); + +bool minnow_lvds_detect(void) +{ + return !!gpio_get_value(GPIO_LVDS_DETECT); +} +EXPORT_SYMBOL_GPL(minnow_lvds_detect); + +void minnow_phy_reset(void) +{ + /* + * Hold reset for a little over 1ms and allow some time after to ensure + * the PHY has fully woken up. + */ + gpio_set_value(GPIO_PHY_RESET, 0); + usleep_range(1250, 1500); + gpio_set_value(GPIO_PHY_RESET, 1); + usleep_range(1250, 1500); +} +EXPORT_SYMBOL_GPL(minnow_phy_reset); + +static int __init minnow_module_init(void) +{ + int err, val, i; + + err = -ENODEV; + if (!minnow_detect()) + goto out; + +#ifdef MODULE +/* Load any implicit dependencies that are not built-in */ +#ifdef CONFIG_LPC_SCH_MODULE + if (request_module("lpc_sch")) + goto out; +#endif +#ifdef CONFIG_GPIO_SCH_MODULE + if (request_module("gpio-sch")) + goto out; +#endif +#ifdef CONFIG_GPIO_PCH_MODULE + if (request_module("gpio-pch")) + goto out; +#endif +#endif + + /* HWID GPIOs */ + err = gpio_request_array(hwid_gpios, ARRAY_SIZE(hwid_gpios)); + if (err) { + pr_err("Failed to request hwid GPIO lines\n"); + goto out; + } + minnow_hwid_val = (!!gpio_get_value(GPIO_HWID0)) | + (!!gpio_get_value(GPIO_HWID1) << 1) | + (!!gpio_get_value(GPIO_HWID2) << 2); + + pr_info("Hardware ID: %d\n", minnow_hwid_val); + + err = gpio_request_one(GPIO_LVDS_DETECT, GPIOF_DIR_IN | GPIOF_EXPORT, + "minnow_lvds_detect"); + if (err) { + pr_err("Failed to request LVDS_DETECT GPIO line (%d)\n", + GPIO_LVDS_DETECT); + goto out; + } + + /* Disable the GPIO lines if LVDS is detected */ + val = minnow_lvds_detect() ? 1 : 0; + pr_info("Aux GPIO lines %s\n", val ? "Disabled" : "Enabled"); + for (i = 0; i < 5; i++) + sch_gpio_resume_set_enable(i, !val); + + /* Reserve the AR8031 PHY's ETH_RESET GPIO line */ + err = gpio_request_one(GPIO_PHY_RESET, + GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT, + "minnow_phy_reset"); + if (err) { + pr_err("Failed to request PHY_RESET GPIO line (%d)\n", + GPIO_PHY_RESET); + goto out_lvds; + } + + /* GPIO LEDs */ + err = platform_device_register(&minnow_gpio_leds); + if (err) { + pr_err("Failed to register leds-gpio platform device\n"); + goto out_phy; + } + goto out; + + out_phy: + gpio_free(GPIO_PHY_RESET); + + out_lvds: + gpio_free(GPIO_LVDS_DETECT); + + out: + return err; +} + +static void __exit minnow_module_exit(void) +{ + gpio_free(GPIO_LVDS_DETECT); + gpio_free(GPIO_PHY_RESET); + platform_device_unregister(&minnow_gpio_leds); +} + +module_init(minnow_module_init); +module_exit(minnow_module_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/minnowboard.h b/include/linux/minnowboard.h new file mode 100644 index 0000000..d3608b8 --- /dev/null +++ b/include/linux/minnowboard.h @@ -0,0 +1,37 @@ +/* + * MinnowBoard Linux platform driver + * Copyright (c) 2013, Intel Corporation. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Darren Hart + */ + +#ifndef _LINUX_MINNOWBOARD_H +#define _LINUX_MINNOWBOARD_H + +#if defined(CONFIG_MINNOWBOARD) || defined(CONFIG_MINNOWBOARD_MODULE) +bool minnow_detect(void); +bool minnow_lvds_detect(void); +int minnow_hwid(void); +void minnow_phy_reset(void); +#else +#define minnow_detect() (false) +#define minnow_lvds_detect() (false) +#define minnow_hwid() (-1) +#define minnow_phy_reset() do { } while (0) +#endif /* MINNOWBOARD */ + +#endif /* _LINUX_MINNOWBOARD_H */ -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/