Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751989Ab3FZCfg (ORCPT ); Tue, 25 Jun 2013 22:35:36 -0400 Received: from mail-oa0-f43.google.com ([209.85.219.43]:60397 "EHLO mail-oa0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751408Ab3FZCfe (ORCPT ); Tue, 25 Jun 2013 22:35:34 -0400 MIME-Version: 1.0 In-Reply-To: <6c27e79870ec93f7a8c6692d4bcfebaee589fa6b.1372211451.git.dvhart@linux.intel.com> References: <6c27e79870ec93f7a8c6692d4bcfebaee589fa6b.1372211451.git.dvhart@linux.intel.com> From: Bjorn Helgaas Date: Tue, 25 Jun 2013 20:35:13 -0600 Message-ID: Subject: Re: [PATCH 8/8] pch_gbe: Add MinnowBoard support To: Darren Hart Cc: Linux Kernel Mailing List , "H. Peter Anvin" , Peter P Waskiewicz Jr , Andy Shevchenko , danders@circuitco.com, vishal.l.verma@intel.com, "David S. Miller" , netdev Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3237 Lines: 68 On Tue, Jun 25, 2013 at 7:53 PM, Darren Hart wrote: > The MinnowBoard uses an AR803x PHY with the PCH GBE. > > It does not implement the RGMII 2ns TX clock delay in the trace routing > nor via strapping. Add a detection method for the board and the PHY and > enable the tx clock delay via the registers. > > This PHY will hibernate without link for 10 seconds. Ensure the PHY is > awake for probe and then disable hibernation. A future improvement would > be to convert pch_gbe to using PHYLIB and making sure we can wake the > PHY at the necessary times rather than permanently disabling it. > > Use the MinnowBoard PCI subsystem ID to identify the board and setup the > appropriate callbacks in a new pci_id driver_data structure. > > Signed-off-by: Darren Hart > Cc: "David S. Miller" > Cc: "H. Peter Anvin" > Cc: Peter Waskiewicz > Cc: Andy Shevchenko > Cc: netdev@vger.kernel.org > --- > drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 1 + > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 + > .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 32 ++++++++ > .../net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c | 89 ++++++++++++++++++++++ > .../net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h | 2 + > 5 files changed, 126 insertions(+) > ... > diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c > index 6667a6b..6f0b9e3 100644 > --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c > +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c >... > +static struct pch_gbe_privdata pch_gbe_minnowboard_privdata = { > + .phy_reset = minnow_phy_reset, > + .phy_tx_clk_delay = pch_gbe_phy_tx_clk_delay, > +}; > + > static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = { > {.vendor = PCI_VENDOR_ID_INTEL, > .device = PCI_DEVICE_ID_INTEL_IOH1_GBE, > + .subvendor = PCI_VENDOR_ID_CIRCUITCO, > + .subdevice = PCI_DEVICE_ID_CIRCUITCO_MINNOWBOARD, "MINNOWBOARD" seems like a pretty generic name for something that probably refers only to the gigabit ethernet device in the EG20T. If you expect to use that same subdevice ID on other devices, I guess we can add PCI_DEVICE_ID_CIRCUITCO_MINNOWBOARD to pci_ids.h. If it will only be used for the gigabit ethernet device, we would normally not add a #define for it and would just use the hex constant here (see the comment at the top of pci_ids.h). > + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), > + .class_mask = (0xFFFF00), > + .driver_data = (unsigned long) &pch_gbe_minnowboard_privdata > + }, > + {.vendor = PCI_VENDOR_ID_INTEL, > + .device = PCI_DEVICE_ID_INTEL_IOH1_GBE, > .subvendor = PCI_ANY_ID, > .subdevice = PCI_ANY_ID, > .class = (PCI_CLASS_NETWORK_ETHERNET << 8), -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/