Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753377Ab3F0NHb (ORCPT ); Thu, 27 Jun 2013 09:07:31 -0400 Received: from kdh-gw.itdev.co.uk ([89.21.227.133]:40495 "EHLO hermes.kdh.itdev.co.uk" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752874Ab3F0Mug (ORCPT ); Thu, 27 Jun 2013 08:50:36 -0400 From: Nick Dyer To: Dmitry Torokhov Cc: Daniel Kurtz , Henrik Rydberg , Joonyoung Shim , Alan Bowens , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Peter Meerwald , Benson Leung , Olof Johansson , Nick Dyer Subject: [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Date: Thu, 27 Jun 2013 13:48:42 +0100 Message-Id: <1372337366-9286-8-git-send-email-nick.dyer@itdev.co.uk> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk> References: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2860 Lines: 83 From: Benson Leung Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the transition to bootloader mode and the transition back from app, wait for the CHG assert to indicate that the transition is done. This change replaces the msleep with a wait for completion that the mxt_interrupt handler signals. Also add CHG poll after last firmware frame - some bootloader versions will assert the interrupt line after the final frame, in testing this meant that the driver attempts to read the info block too early whilst the chip is still resetting. This improves firmware update time as we no longer wait longer than necessary for each reset. Signed-off-by: Benson Leung Signed-off-by: Daniel Kurtz Signed-off-by: Nick Dyer --- drivers/input/touchscreen/atmel_mxt_ts.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 3f75e8c..55d7667 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -181,8 +181,8 @@ #define MXT_BACKUP_VALUE 0x55 #define MXT_BACKUP_TIME 50 /* msec */ #define MXT_RESET_TIME 200 /* msec */ - -#define MXT_FWRESET_TIME 175 /* msec */ +#define MXT_FW_RESET_TIME 3000 /* msec */ +#define MXT_FW_CHG_TIMEOUT 300 /* msec */ /* Command to unlock bootloader */ #define MXT_UNLOCK_CMD_MSB 0xaa @@ -376,7 +376,7 @@ recheck: * CHG assertion before reading the status byte. * Once the status byte has been read, the line is deasserted. */ - ret = mxt_wait_for_chg(data, 300); + ret = mxt_wait_for_chg(data, MXT_FW_CHG_TIMEOUT); if (ret) { /* * TODO: handle -EINTR better by terminating fw update @@ -1048,6 +1048,15 @@ static int mxt_load_fw(struct device *dev, const char *fn) dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size); } + /* Wait for flash. */ + ret = mxt_wait_for_chg(data, MXT_FW_RESET_TIME); + if (ret) + goto disable_irq; + + /* Wait for device to reset. Some bootloader versions do not assert + * the CHG line after bootloading has finished, so ignore error */ + mxt_wait_for_chg(data, MXT_FW_RESET_TIME); + data->in_bootloader = false; disable_irq: @@ -1076,10 +1085,6 @@ static ssize_t mxt_update_fw_store(struct device *dev, count = error; } else { dev_dbg(dev, "The firmware update succeeded\n"); - - /* Wait for reset */ - msleep(MXT_FWRESET_TIME); - mxt_free_object_table(data); mxt_initialize(data); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/