Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753479Ab3F1FhI (ORCPT ); Fri, 28 Jun 2013 01:37:08 -0400 Received: from mga09.intel.com ([134.134.136.24]:22199 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751132Ab3F1FhH (ORCPT ); Fri, 28 Jun 2013 01:37:07 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.87,956,1363158000"; d="scan'208";a="336816747" Message-ID: <1372397822.9243.22.camel@envy.home> Subject: Re: [PATCH 8/8] pch_gbe: Add MinnowBoard support From: Darren Hart To: Linux Kernel Mailing List Cc: "H. Peter Anvin" , peter.p.waskiewicz.jr@intel.com, andriy.shevchenko@linux.intel.com, danders@circuitco.com, vishal.l.verma@intel.com, "David S. Miller" , netdev@vger.kernel.org Date: Thu, 27 Jun 2013 22:37:02 -0700 In-Reply-To: <6c27e79870ec93f7a8c6692d4bcfebaee589fa6b.1372211451.git.dvhart@linux.intel.com> References: <6c27e79870ec93f7a8c6692d4bcfebaee589fa6b.1372211451.git.dvhart@linux.intel.com> Organization: Intel Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.6.4 (3.6.4-2.fc18) Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1461 Lines: 38 On Tue, 2013-06-25 at 18:53 -0700, Darren Hart wrote: > The MinnowBoard uses an AR803x PHY with the PCH GBE. > > It does not implement the RGMII 2ns TX clock delay in the trace routing > nor via strapping. Add a detection method for the board and the PHY and > enable the tx clock delay via the registers. > > This PHY will hibernate without link for 10 seconds. Ensure the PHY is > awake for probe and then disable hibernation. A future improvement would > be to convert pch_gbe to using PHYLIB and making sure we can wake the > PHY at the necessary times rather than permanently disabling it. > > Use the MinnowBoard PCI subsystem ID to identify the board and setup the > appropriate callbacks in a new pci_id driver_data structure. > Per the discussion on the minnowboard platform drivers in this series (which provide the minnow_phy_reset() function), I will be rewriting this patch to provide its own phy_physical_reset() or similar which will look like the other two phy functions I've added and will take a GPIO line as an argument, determined by pci_id. Please disregard this patch for now. Thanks, -- Darren Hart Intel Open Source Technology Center Yocto Project - Technical Lead - Linux Kernel -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/