Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753480Ab3F1T4i (ORCPT ); Fri, 28 Jun 2013 15:56:38 -0400 Received: from mail.free-electrons.com ([94.23.35.102]:33721 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751064Ab3F1T4c (ORCPT ); Fri, 28 Jun 2013 15:56:32 -0400 From: Maxime Ripard To: John Stultz , Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Emilio Lopez , kevin@allwinnertech.com, sunny@allwinnertech.com, shuge@allwinnertech.com, linux-sunxi@googlegroups.com, Maxime Ripard Subject: [PATCHv2 7/8] clocksource: sun4i: Cleanup parent clock setup Date: Fri, 28 Jun 2013 21:56:25 +0200 Message-Id: <1372449386-1334-8-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1372449386-1334-1-git-send-email-maxime.ripard@free-electrons.com> References: <1372449386-1334-1-git-send-email-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1940 Lines: 50 The current bring-up code for the timer was overly complicated. The only thing we need is actually which clock we want to use as source and that's pretty much all. Let's keep it that way. Signed-off-by: Maxime Ripard --- drivers/clocksource/sun4i_timer.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index d6621c5..a77fa29 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -31,6 +31,9 @@ #define TIMER_CTL_REG(val) (0x10 * val + 0x10) #define TIMER_CTL_ENABLE BIT(0) #define TIMER_CTL_AUTORELOAD BIT(1) +#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2) +#define TIMER_CTL_CLK_SRC_OSC24M (1) +#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) #define TIMER_CTL_ONESHOT BIT(7) #define TIMER_INTVAL_REG(val) (0x10 * val + 0x14) #define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18) @@ -144,16 +147,8 @@ static void __init sun4i_timer_init(struct device_node *node) writel(clk_get_rate(clk) / HZ, timer_base + TIMER_INTVAL_REG(0)); - /* set clock source to HOSC, 16 pre-division */ - val = readl(timer_base + TIMER_CTL_REG(0)); - val &= ~(0x07 << 4); - val &= ~(0x03 << 2); - val |= (4 << 4) | (1 << 2); - writel(val, timer_base + TIMER_CTL_REG(0)); - - /* set mode to auto reload */ - val = readl(timer_base + TIMER_CTL_REG(0)); - writel(val | TIMER_CTL_AUTORELOAD, timer_base + TIMER_CTL_REG(0)); + writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M) | TIMER_CTL_AUTORELOAD, + timer_base + TIMER_CTL_REG(0)); ret = setup_irq(irq, &sun4i_timer_irq); if (ret) -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/