Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754174Ab3GAOC5 (ORCPT ); Mon, 1 Jul 2013 10:02:57 -0400 Received: from mail-lb0-f173.google.com ([209.85.217.173]:48469 "EHLO mail-lb0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753121Ab3GAOCz (ORCPT ); Mon, 1 Jul 2013 10:02:55 -0400 From: Jonas Jensen To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, arm@kernel.org, john.stultz@linaro.org, tglx@linutronix.de, u.kleine-koenig@pengutronix.de, tomasz.figa@gmail.com, linus.walleij@linaro.org, thomas.petazzoni@free-electrons.com, arnd@arndb.de, Jonas Jensen Subject: [PATCH v4] ARM: clocksource: add support for MOXA ART SoCs Date: Mon, 1 Jul 2013 16:02:39 +0200 Message-Id: <1372687359-18235-1-git-send-email-jonas.jensen@gmail.com> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1372332203-30228-1-git-send-email-jonas.jensen@gmail.com> References: <1372332203-30228-1-git-send-email-jonas.jensen@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6598 Lines: 222 This patch adds an clocksource driver for the main timer(s) found on MOXA ART SoCs. Signed-off-by: Jonas Jensen --- Notes: This should hopefully address most of the issues pointed out by Thomas. Preventing the counter from passing match, TIMER1 is now stopped before count is read, I leave it up to you to comment. I think REG_MATCH1 triggers on ==, or rather, I have no reason to believe otherwise. Documentation does not seem to be publicly available, at least my searches have come up empty. The old 2.6.9 sources which this is loosely derived from, rely entirely on setting load with periodic timer_tick. REG_MATCH1 was never used there. Applies to next-20130619 Changes since v3: 1. fix indentation 2. stop TIMER1 before reading count in moxart_clkevt_next_event 3. use tabs to align assigned values 4. handle errors and use more consistent messages 5. change max_delta from 0xf0000000 to 0xfffffffe (and add comment) drivers/clocksource/Makefile | 1 + drivers/clocksource/moxart_timer.c | 165 +++++++++++++++++++++++++++++++++++++ 2 files changed, 166 insertions(+) create mode 100644 drivers/clocksource/moxart_timer.c diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 8d979c7..c93e1a8 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -29,3 +29,4 @@ obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o +obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c new file mode 100644 index 0000000..ae95a11 --- /dev/null +++ b/drivers/clocksource/moxart_timer.c @@ -0,0 +1,165 @@ +/* + * MOXA ART SoCs timer handling. + * + * Copyright (C) 2013 Jonas Jensen + * + * Jonas Jensen + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TIMER1_BASE 0x00 +#define TIMER2_BASE 0x10 +#define TIMER3_BASE 0x20 + +#define REG_COUNT 0x0 /* writable */ +#define REG_LOAD 0x4 +#define REG_MATCH1 0x8 +#define REG_MATCH2 0xC + +#define TIMER_CR 0x30 +#define TIMER_INTR_STATE 0x34 +#define TIMER_INTR_MASK 0x38 + +/* + * TIMER_CR flags: + * + * TIMEREG_CR_*_CLOCK 0: PCLK, 1: EXT1CLK + * TIMEREG_CR_*_INT overflow interrupt enable bit + */ +#define TIMEREG_CR_1_ENABLE (1 << 0) +#define TIMEREG_CR_1_CLOCK (1 << 1) +#define TIMEREG_CR_1_INT (1 << 2) +#define TIMEREG_CR_2_ENABLE (1 << 3) +#define TIMEREG_CR_2_CLOCK (1 << 4) +#define TIMEREG_CR_2_INT (1 << 5) +#define TIMEREG_CR_3_ENABLE (1 << 6) +#define TIMEREG_CR_3_CLOCK (1 << 7) +#define TIMEREG_CR_3_INT (1 << 8) +#define TIMEREG_CR_COUNT_UP (1 << 9) +#define TIMEREG_CR_COUNT_DOWN (0 << 9) + +static void __iomem *base; +static unsigned int clock_count_per_tick; + +static void moxart_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + u32 u = readl(base + TIMER_CR); + + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_ONESHOT: + u &= ~TIMEREG_CR_1_ENABLE; + writel(u, base + TIMER_CR); + writel(~0, base + TIMER1_BASE + REG_LOAD); + break; + case CLOCK_EVT_MODE_PERIODIC: + writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD); + u |= TIMEREG_CR_1_ENABLE; + writel(u, base + TIMER_CR); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + u &= ~TIMEREG_CR_1_ENABLE; + writel(u, base + TIMER_CR); + break; + } +} + +static int moxart_clkevt_next_event(unsigned long cycles, + struct clock_event_device *unused) +{ + u32 u; + + u = readl(base + TIMER_CR) & ~TIMEREG_CR_1_ENABLE; + writel(u, base + TIMER_CR); + u = readl(base + TIMER1_BASE + REG_COUNT) - cycles; + writel(u, base + TIMER1_BASE + REG_MATCH1); + u = readl(base + TIMER_CR) | TIMEREG_CR_1_ENABLE; + writel(u, base + TIMER_CR); + return 0; +} + +static struct clock_event_device moxart_clockevent = { + .name = "moxart_timer", + .rating = 200, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = moxart_clkevt_mode, + .set_next_event = moxart_clkevt_next_event, +}; + +static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction moxart_timer_irq = { + .name = "moxart-timer", + .flags = IRQF_TIMER, + .handler = moxart_timer_interrupt, + .dev_id = &moxart_clockevent, +}; + +static void __init moxart_timer_init(struct device_node *node) +{ + int ret, irq; + unsigned long pclk; + struct clk *clk; + + base = of_iomap(node, 0); + if (!base) + panic("%s: of_iomap failed\n", node->full_name); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("%s: irq_of_parse_and_map failed\n", node->full_name); + + ret = setup_irq(irq, &moxart_timer_irq); + if (ret) + panic("%s: setup_irq failed\n", node->full_name); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("%s: of_clk_get failed\n", node->full_name); + + pclk = clk_get_rate(clk); + + if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT, + "moxart_timer", pclk, 200, 32, + clocksource_mmio_readl_down)) + panic("%s: clocksource_mmio_init failed\n", node->full_name); + + clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); + + writel(~0, base + TIMER2_BASE + REG_LOAD); + writel(TIMEREG_CR_2_ENABLE, base + TIMER_CR); + + moxart_clockevent.cpumask = cpumask_of(0); + + /* + * documentation is not publicly available: + * min_delta / max_delta obtained by trial-and-error, + * max_delta 0xfffffffe should be ok because count + * register size is u32 + */ + clockevents_config_and_register(&moxart_clockevent, pclk, + 0x4, 0xfffffffe); +} +CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init); -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/